Contents

Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual PDF

1 of 14
1 of 14

Summary of Content for Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual PDF

COPYRIGHT Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED. Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as EZVIZ). This user manual (hereinafter referred to as the Manual) cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to the Manual. About this Manual The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please find the latest version in the website (http://www.ezviz.com). Revision Record New release January 2022 Trademarks Acknowledgement

, , and other EZVIZs trademarks and logos are the properties of EZVIZ in various jurisdictions. Other trademarks and logos mentioned below are the properties of their respective owners. Legal Disclaimer TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED AS IS, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZS TOTAL LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT. EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTYS PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG OTHERS. REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES. IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.

Table of Contents

Overview 1 1 Package Contents 1 2 Basics 1

Setup 2 1 Get the EZVIZ App 3 2 Power on the camera 3 3 Add Camera to EZVIZ 4

Camera Installation 4 1 Install Micro SD Card (Optional) 4 2 Installation Steps 5 3 Remove the shell (Optional) 7 4 Install the shell (Optional) 7

View Your Device 8 1 Live View 8 2 Settings 9

EZVIZ Connect 10 1 Use Amazon Alexa 10 2 Use Google Assistant 11

FAQ 11

Initiatives on the Use of Video Products 12

1

Overview 1 Package Contents

Camera (x1)

USB Cable (x1) Regulatory Information (x1)

Quick Installation Guide(x1) Quick Start Guide (x1) Bracket (x1)

2 Basics

Lens

IR Light IR Light

Sensor

PIR

LED Indicator

MIC

Name Description LED Indicator Solid Blue: Camera starting up or being live viewed in the EZVIZ app.

Fast-flashing Blue: Camera ready for Wi-Fi configuration. Slow-Flashing Blue: Camera working properly. Slow-flashing Red: Network exception. Fast-flashing Red: Camera exception. Solid Green: Camera fully charged. Slow-flashing Green: Charging.

2

Micro SD Card Slot

Reset Button

Power Port

Power Button

Name Description Micro SD Card (sold separately)

Initialize the card in the EZVIZ app before using it. Recommended compatibility: Class 10, maximum space 256GB.

Reset Button Press and hold for 4 seconds to restart and set all parameters to default. Power Port For charging the camera. Power Button Power on: Press and hold for 2 seconds in shut-down state.

Power off: Press and hold for 4 seconds to power off the camera.

Speaker

Setup Follow the steps to set your camera:

1. Get the EZVIZ app, and log in to your EZVIZ app account. 2. Power on your camera. 3. Add your camera to your EZVIZ account.

3

1 Get the EZVIZ App 1. Connect your mobile phone to Wi-Fi (suggested). 2. Download and install the EZVIZ app by searching EZVIZ in the App Store or Google PlayTM. 3. Launch the app and register an EZVIZ user account.

EZVIZ App

If you have already used the app, please make sure that it is the latest version. To find out if an update is available, go to the app store and search for EZVIZ.

2 Power on the camera In the shutdown state, hold the power button for 2 seconds to power on.

If the camera is out of battery, connect it to power outlet with the power adapter (5V 2A) for charging (purchase separately). It is recommended to fully charge the camera before you use it for the first time.

Power Outlet

Power Cable

Name Description LED Indicator Solid Green: Camera fully charged.

Slow-flashing Green: Charging.

It is recommended to use the power cable included in the package. Please purchase a 5V 2A power adapter, cause it is not included in the package. Please do not charge the camera when the temperature exceeds 45 degrees or below 0 degrees. It is not allowed to charge the camera with power adapter outdoors. When charging, the camera will be automatically turned on.

4

3 Add Camera to EZVIZ

- Press and hold the reset button on the camera for 4 seconds. When the LED indicator flashes blue quickly, indicates that the camera is ready for Wi-Fi configuration.

- Log in to your account using the EZVIZ app. - On the Home screen, tap + on the upper-right corner to go to the Scan QR Code interface. - Scan the QR code on the Quick Start Guide cover or on the body of the camera.

- Follow the EZVIZ app wizard to finish Wi-Fi configuration.

If you want to change your camera's Wi-Fi, press and hold the reset button for 4 seconds and repeat the steps above.

Camera Installation 1 Install Micro SD Card (Optional)

- Insert the Micro SD card (sold separately) into the card slot as shown in the figure below.

After installing the Micro SD card, you should initialize the card in the EZVIZ app before using it.

- In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card status. - If the memory card status displays as Uninitialized, tap to initialize it.

The status will then change to Normal and it can store videos.

5

2 Installation Steps

The device is not waterproof. Please install indoor. It is recommended to install the camera around the crib for better care of the baby. Do not install the camera more than 6.6 ft (2 m) above the ground to avoid being injured.

1. Rotate the rotatable cylinder of the bracket counterclockwise and lift the upper clip of the bracket base as shown in the figure below.

Rotatable Cylinder

Upper Clip

2. Insert the base into the place where you want to install the device and rotate the rotatable cylinder to fix the bracket in case of loosening or falling.

2

1

During installation, it is recommended to adjust the detection sensitivity of the camera in EZVIZ APP.

6

3. After installation, it is recommended to adjust the position of the lens (by adjusting the soft rod of the bracket) through the live view in EZVIZ App to get the best monitoring perspective.

The soft rod (Adjustable part) Note: Do not bend excessively in case of camera falling.

- For example: Install the camera around the crib. The installation effect is shown in the figure below.

7

3 Remove the shell (Optional)

The device shell is made of food-grade silica gel. Please rest assured that it does not need high-temperature cooking and disinfection or the magnetic effect might be affected.

Don't remove the shell. If you must remove the shell, please follow the tips below.

Don's

Push the device body backward from the front end of the shell.

Do's

Push the device body forward from the rear end of the shell.

4 Install the shell (Optional)

Don's

Insert the rear part of the device body from the front end of the shell until it is installed properly.

Do's

Insert the front part of the device body from the rear end of the shell until it is installed properly.

8

View Your Device The App interface may change due to version update. Please refer to the actual interface.

1 Live View When you launch the EZVIZ app, the device page displays as shown below.

You can view and listen to a live feed, take snapshots or recordings, and choose video definition as needed.

Swipe left and right across the screen to see more icons.

Icon Description

Share. Share your device.

Settings. View or change the device settings.

Snapshot. Take a snapshot.

Record. Manually start/stop recording.

Talk. Start using talk and listen.

Definition. Select video resolution from Ultra HD, Hi-Def or Standard.

Multi-screen Live. Tap to select live view window layout.

Please refer to the actual interface for specific information.

9

2 Settings

In the settings page, you can set the parameters of the device.

Parameter Description

Name Customize the name of your device.

Working Mode

Record Mode: The camera will keep recording. Please plug the camera in. Performance Mode: One video clip is longer but saves less power. Power Saving Mode: One video clip is shorter but saves more power. Super Power-saving: Sleep Mode is on. Active live view can wake up the camera. Configure Working Mode: Customize the working mode in different periods.

Intelligent Detection You can customize the detection notification by changing the value of detection sensitivity.

Devices will alert based on the selected mode, including device-side audible notification and App-side message notification.

Notification You can set the notification from the device-side and app-side.

Audio When disabled, both live view and recorded videos will not have audio.

Image

Original: Default image style. Soft: Lower color saturation. Vivid: Higher color saturation. OSD: When enabled, OSD with the device name will be displayed on all videos captured by the camera.

Light When disabled, the camera indicator will be off.

Exceptions: The camera indicator will still be on, when the camera is charging or the camera is exception.

Battery You can see the battery capacity.

Cloud Storage You can subscribe and manage the cloud storage.

Record List You can see the device storage status, include cloud storage and memory card.

Security Settings Video Encryption: When enabled, your videos will be encrypted. Change Encryption Password: You can change your encryption password.

Network You can see the Wi-Fi that the device has connected to, and you can tap to change to another Wi-Fi.

Device Information You can see the device information here.

Share the Device Enter an email address or phone number to invite and grant device permissions to a family member or guest.

Delete Device Tap to delete the camera from your EZVIZ account.

10

EZVIZ Connect 1 Use Amazon Alexa

These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the process, please refer to Troubleshooting.

Before you start, make sure that:

1. EZVIZ devices are connected to the EZVIZ app. 2. In the EZVIZ app, turn off the "Video Encryption" and turn on the "Audio" in the Device Settings page. 3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick

(second generation only), or Fire TV Edition smart TVs). 4. The Amazon Alexa app is already installed on your smart device, and you have created an account.

To Control EZVIZ devices with Amazon Alexa:

1. Open the Alexa app and select "Skills and Games" from the menu. 2. On the Skills and Games screen, search for "EZVIZ", and you will find "EZVIZ" skills. 3. Select your EZVIZ device's skill, then tap ENABLE TO USE. 4. Enter your EZVIZ username and password, and tap Sign in. 5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices. 6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ

devices. 7. Go back to Alexa app menu and select "Devices", and under devices you will see all your EZVIZ devices.

Voice Command

Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice Control function. Once the device is found, you can control it with your voice. Speak simple commands to Alexa.

Your device's name for example: "show xxxx camera," can be modified in the EZVIZ app. Every time you change the name of the device, you will need to discover the device again to update the name.

Troubleshooting

What do I do if Alexa fails to discover my device? Check if there are any Internet connecting problems. Try to reboot the smart device and re-discover the device on Alexa. Why does the device's status show "Offline" on Alexa? Your wireless connection might have been disconnected. Reboot the smart device and re-discover on Alexa. Internet access on your router could be unavailable. Check if your router is connected to the Internet and try again.

For details about countries that support the using of Amazon Alexa, see its official website.

11

2 Use Google Assistant With the Google Assistant, you can activate your EZVIZ device and watch live by speaking Google Assistant voice commands.

The following devices and apps are required: 1. A functional EZVIZ app. 2. In the EZVIZ app, turn off the "Video Encryption" and turn on the "Audio" in the Device Settings page. 3. A TV with functional Chromecast connecting to it. 4. The Google Assistant app on your phone.

To get started, follow the steps below: 1. Set up the EZVIZ device and make sure it works properly on the app. 2. Download the Google Home app from the App Store or Google Play StoreTM and log into your Google account. 3. On the Myhome screen, tap + on the upper-left corner, and select "Set up device" from the menu list to go to the Set up

interface. 4. Tap Works with Google, and search for "EZVIZ", where you will find "EZVIZ" skills. 5. Enter your EZVIZ username and password, and tap Sign in. 6. Tap the Authorize button to authorize Google to access your EZVIZ account, so that Google can control your EZVIZ devices. 7. Tap Return to app. 8. Follow the above steps to complete the authorization. When synchronization is completed, EZVIZ service will be listed under

your list of services. To see a list of compatible devices under your EZVIZ account, tap on the EZVIZ service icon. 9. Now try some commands. Use the name of the camera that you created when you set up the system.

Users can manage devices as a single entity or in a group. Adding devices to a room allows users to control a group of devices at the same time using one command. See the link for more information: https://support.google.com/googlehome/answer/7029485?co=GENIE.Platform%3DAndroid&hl=en

FAQ Q: A:

If the camera is offline on the App, will the video recording be continued? If the camera is powered on but disconnect to the Internet, then local recording will continue but cloud recording will stop. If the camera is powered off, both video recordings will stop.

Q: A:

Why the alarm is triggered when nobody in the image? Try to set the alarm sensitivity lower. Please notice that vehicle and animals are also the trigger source.

Q: A:

Why the alarm is not triggered when there is human appear in the PIR detection area?

- Try to set the alarm sensitivity higher. - Make sure that there is someone in detection area, and the PIR detection distance is 7 meters when the detection

sensitivity is set to 100. - Limited by PIR detection technology, the camera may fail to detect motion when environment temperature is close to

human body temperature or someone approaches the PIR sensor vertically.

Q: What if the LED indicator remains off? A: - Please check whether the camera has run out of battery (press and hold the power button for 2 seconds, the LED indicator

will fast flash red for 2 times). If so, charge the camera as soon as possible. - If the LED indicator still can not be turned on after the camera is charged, it is recommended to check whether the LED

indicator is turned off on the setting page on EZVIZ APP. If so, turn it on.

For additional information about the device, please refer to www.ezviz.com.

12

Initiatives on the Use of Video Products

Thank you for choosing EZVIZ products. Technology affects every aspect of our life. As a high-tech company, we are increasingly aware of the role technology plays in improving business efficiency and quality of life, but at the same time, the potential harm of its improper usage. For example, video products are capable of recording real, complete and clear images. This provides a high value in retrospect and preserving real-time facts. However, it may also result in the infringement of a third partys legitimate rights and interests if improper distribution, use and/or processing of video data takes place. With the philosophy of Technology for the Good, EZVIZ requests that every end user of video technology and video products shall comply with all the applicable laws and regulations, as well as ethical customs, aiming to jointly create a better community. Please read the following initiatives carefully:

1. Everyone has a reasonable expectation of privacy, and the installation of video products should not be in conflict with this reasonable expectation. Therefore, a warning notice shall be given in a reasonable and effective manner and clarify the monitoring range, when installing video products in public areas. For non-public areas, a third partys rights and interests shall be evaluated when installing video products, including but not limited to, installing video products only after obtaining the consent of the stakeholders, and not installing highly-invisible video products.

2. The purpose of video products is to record real activities within a specific time and space and under specific conditions. Therefore, every user shall first reasonably define his/her own rights in such specific scope, in order to avoid infringing on a third partys portraits, privacy or other legitimate rights.

3. During the use of video products, video image data derived from real scenes will continue to be generated, including a large amount of biological data (such as facial images), and the data could be further applied or reprocessed. Video products themselves could not distinguish good from bad regarding how to use the data based solely on the images captured by the video products. The result of data usage depends on the method and purpose of use of the data controllers. Therefore, data controllers shall not only comply with all the applicable laws and regulations and other normative requirements, but also respect international norms, social morality, good morals, common practices and other non-mandatory requirements, and respect individual privacy, portrait and other rights and interests.

4. The rights, values and other demands of various stakeholders should always be considered when processing video data that is continuously generated by video products. In this regard, product security and data security are extremely crucial. Therefore, every end user and data controller, shall undertake all reasonable and necessary measures to ensure data security and avoid data leakage, improper disclosure and improper use, including but not limited to, setting up access control, selecting a suitable network environment (the Internet or Intranet) where video products are connected, establishing and constantly optimizing network security.

5. Video products have made great contributions to the improvement of social security around the world, and we believe that these products will also play an active role in more aspects of social life. Any abuse of vi

Manualsnet FAQs

If you want to find out how the APAC Ezviz works, you can view and download the Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual on the Manualsnet website.

Yes, we have the User Manual for Ezviz APAC as well as other Ezviz manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Manual should include all the details that are needed to use a Ezviz APAC. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Ezviz BM1 Rabbit APAC V1.0.0 Camera User Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.