Contents

Epson Stylus Pro 3800 v5 Installation Guide PDF

1 of 12
1 of 12

Summary of Content for Epson Stylus Pro 3800 v5 Installation Guide PDF

ColorBurst RIP for

Epson Stylus Pro 3800

GETTING STARTED

2

Getting Started

The enclosed CD includes the ColorBurst RIP server software and client PPD (PostScript Printer Description) software, as well as the SpectralVision utility for printer linearization.

Before setting up the ColorBurst RIP, see your Epson Stylus Pro manual to set up the Epson Stylus Pro printer on the computer that will run the RIP server.

To set up the RIP server, double-click the installer icon and follow the on-screen instructions. Then see one of the following files:

Mac OS X: Applications > ColorBurst Epson > Epson Quick Start Mac.pdf

Windows: C:\ColorBurst Epson > Epson Quick Start Windows.pdf

For linearization instructions, see one of the following files:

Mac OS X: Applications > ColorBurst Epson > Utilities > SpectralVision Pro > SpectralVision Pro Mac EPSON.pdf

Windows: C:\ColorBurst Epson > SpectralVision Pro Win EPSON.pdf

Note: The file names and paths may be slightly different.

3

Once the RIP server is installed and set up, see the appropriate section to set up client systems for printing:

Mac OS X Clients Printing to a Mac OS X RIP Server on page 4

Mac OS X Clients Printing to a Windows RIP Server on page 5

Windows Clients Printing to a Windows RIP Server on page 7

Windows Clients Printing to a Mac OS X RIP Server on page 8

Note: For a reliable connection, make sure client computers are on the same subnet as the ColorBurst RIP server computer.

4

Mac OS X Clients Printing to a Mac OS X RIP Server

These instructions are for Mac OS X 10.4.x through 10.6.x.

1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer.

2. Insert the ColorBurst RIP CD in a CD/DVD drive.

3. Double-click the CD icon, then double-click the ColorBurst PPD Client Installer icon.

4. When installation is complete, check the ColorBurst RIP server computer to make sure ColorBurst RIP is running.

5. Select Apple Menu > System Preferences > Print & Fax.

6. Click the button. The ColorBurst RIP print server name appears in the list.

7. Select the ColorBurst RIP print server name from the Bonjour printers.

8. Make sure ColorBurst Epson RIP is selected in the Printer Model or Print Using list.

9. Click Add to add the printer. You see the ColorBurst RIP Print Server name in the printer list.

10. Close the Print & Fax window or the Printer Setup Utility. Youre ready to print to the ColorBurst RIP.

5

Mac OS X Clients Printing to a Windows RIP Server

These instructions are for Mac OS X 10.4.x through 10.6.x.

1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer.

2. Insert the ColorBurst RIP CD in a CD/DVD drive.

3. Double-click the CD icon, then double-click the ColorBurst PPD Client Installer icon.

4. When installation is complete, check the ColorBurst RIP server computer to make sure ColorBurst is running.

5. Select Apple Menu > System Preferences > Print & Fax.

6. Click the button.

7. Click Windows (10.6.x or 10.5.x) or select More Printers, then Windows Printing from the pop-up menu (10.4.x). Choose the Workgroup name where the computer is located.

In 10.4.x, you can select Network Neighborhood to show all the workgroups on the network.

8. Select the name of the workgroup where the ColorBurst RIP Server is running. In 10.4.x, click Choose.

6

9. Select the Windows computer name where the ColorBurst RIP is running. In 10.4.x, click Choose.

10. Select ColorBurst RIP. Then select the ColorBurst RIP driver under the Printer Model or Printer Using list.

If you dont see the ColorBurst RIP driver under the Printer Model or Print Using list, select Other. Then navigate to the Hard Drive\Library\ Printers\PPDs\Contents\Resources folder, select CSEXXXX.PPD.GZ, and click Open (10.6 or 10.5.x) or Choose (10.4.x).

Note: If the Windows server has a firewall enabled, you may need to enter a user name and password. Contact your network administrator for assistance or see your Windows Help for more information.

11. Click Add to add the printer. You see the ColorBurst RIP Print Server name in the printer list.

12. Close the Print & Fax window. Youre ready to print to the ColorBurst RIP.

7

Windows Clients Printing to a Windows RIP Server

ColorBurst supports 32-bit versions of Windows 7, Windows Vista, and Windows XP. Other versions of Windows, including 64-bit versions, are not supported.

Note: Make sure the ColorBurst RIP is shared on the server.

1. Make sure the network is set up and the ColorBurst RIP is running.

2. Windows 7 or Windows Vista: Click > Control Panel > Devices and Printers (or Hardware and Sound) > Printers.

Windows XP: Click Start > Control Panel > Printers and Faxes.

3. Windows 7 or Windows Vista: Click Add a Printer. Then select the Network option.

Windows XP: Click Add a Printer, then click Next. Select the Network option, then click Next.

4. Windows 7 or Windows Vista: Select the ColorBurst RIP printer, then click Next. Follow the instructions on the screen to install the driver.

Windows XP: Select Connect to this printer (browse for a printer), then click Next. Browse the network and select the ColorBurst shared printer, then click Next.

5. Leave the default name or enter a new name in the Printer name box. Then click Next.

8

6. If you want to use the ColorBurst RIP as your default printer, choose Set as the default printer or Yes. If not, uncheck the Set as the default printer checkbox or choose No. Click Next.

7. Click Finish when you see a screen telling you that setup is complete. Youre ready to print to the ColorBurst RIP.

Windows Clients Printing to a Mac OS X RIP Server

ColorBurst supports 32-bit versions of Windows 7, Windows Vista, and Windows XP. Other versions of Windows, including 64-bit versions, are not supported.

1. Make sure your computer is connected to the same network as the ColorBurst RIP server computer.

2. Copy the Windows Print Driver zip file from the Applications > ColorBurst > Utilities folder on the server to the client system.

3. Unzip the Windows Print Driver zip file.

4. Windows 7 or Windows Vista: Click > Control Panel > Devices and Printers (or Hardware and Sound) > Printers.

Windows XP: Click Start > Control Panel > Printers and Faxes.

5. Windows 7 or Windows Vista: Click Add a Printer.

Windows XP: Double-click the Add Printer icon, then click Next.

9

6. Select the Local printer option. In Windows XP, make sure Automatically detect and install my Plug and Play printer is unchecked. Then click Next.

7. Click Create a new port, select Standard TCP/IP Port, and click Next.

8. Windows 7 or Windows Vista: Uncheck Query the printer and automatically select the driver to use.

Windows XP: When you see the Add Standard TCP/IP Print Port Wizard screen, click Next.

9. Enter the IP address for the Macintosh that is running the ColorBurst RIP server (located under System Preferences > Network settings), then click Next. The IP address on the Macintosh ColorBurst server must be static.

10. Select Custom, then click the Settings button.

10

11. On the next window, select the following settings, then click OK:

Under Protocol, select LPR. For the Queue Name, enter the exact ColorBurst Print Server Name

that appears in the Macintosh RIP servers ColorBurst RIP Preferences window. The name is case-sensitive; the default name is ColorBurst_RIP.

Make sure LPR Byte Counting Enabled is unchecked.

12. Click Next.

13. Windows 7 or Windows Vista: Click Next.

Windows XP: Click Finish to close the Add Standard TCP/IP Printer Port Wizard.

14. At the next screen, click Have Disk, then click Browse.

15. Browse to the folder that you unzipped and select ColorBurst.inf.

16. Click Open to return to the Install from Disk window.

17. Click OK.

18. Select ColorBurst, then click Next.

19. Leave the default name or enter a new name in the Printer name box. Then click Next.

20. Follow the on-screen instructions to install the software.

11

21. At the end of the installation, click Finish.

22. Restart your computer. Youre ready to print to the ColorBurst RIP.

Epson and Epson Stylus are registered trademarks of Seiko Epson Corporation.

ColorBurst is a registered trademark and SpectralVision is a trademark of CSE Systems, Inc.

General Notice: Other

Manualsnet FAQs

If you want to find out how the Stylus Pro 3800 Epson works, you can view and download the Epson Stylus Pro 3800 v5 Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Epson Stylus Pro 3800 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Epson Stylus Pro 3800. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson Stylus Pro 3800 v5 Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson Stylus Pro 3800 v5 Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson Stylus Pro 3800 v5 Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson Stylus Pro 3800 v5 Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson Stylus Pro 3800 v5 Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.