Epson B12B808411 User's Guide PDF

Network Interface Panel Users Guide

NPD4747-01 EN

Contents

Copyright and Trademarks

Safety Instructions Important Safety Instructions. . . . . . . . . . . . . . . . . 4 Cautions and Notes. . . . . . . . . . . . . . . . . . . . . . . . . 4

Getting to Know Your Network Interface Panel Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . 5

Using the Cable Clips. . . . . . . . . . . . . . . . . . . . . 6 Panel parts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Setting Up the Network Interface Panel Connecting the Network Interface Panel to a Network. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Configuring Scanning Software on Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Connecting to an IPv4 Network Automatically . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Connecting to an IPv4 Network Manually. . . . . 12 Connecting to an IPv6 Network. . . . . . . . . . . . . 14

Using EpsonNet Config. . . . . . . . . . . . . . . . . . . . . 14 Operating Environment. . . . . . . . . . . . . . . . . . 15

Scanning an Image Configuring Scanning Software on Your Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Scanning Over a Network. . . . . . . . . . . . . . . . . . . 17

For Windows. . . . . . . . . . . . . . . . . . . . . . . . . . 18 For Mac OS X. . . . . . . . . . . . . . . . . . . . . . . . . . 18

Scanning from the Panel. . . . . . . . . . . . . . . . . . . . 18

About the Control Panel Menu List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Environment menu. . . . . . . . . . . . . . . . . . . . . . 20 Display menu. . . . . . . . . . . . . . . . . . . . . . . . . . 20 Energy saving menu. . . . . . . . . . . . . . . . . . . . . 20 Network menu. . . . . . . . . . . . . . . . . . . . . . . . . 20 Restore settings menu. . . . . . . . . . . . . . . . . . . . 21

Troubleshooting Problems Indicated by Messages on the LCD Panel or Status Lights. . . . . . . . . . . . . . . . . . . . . . 22 Problems and Solution. . . . . . . . . . . . . . . . . . . . . 22

The LCD screen is not displayed even when the scanner is on.. . . . . . . . . . . . . . . . . . . . . . . . . . 23 The scanner does not scan.. . . . . . . . . . . . . . . . 23 Web-based EpsonNet Config cannot be started or be made settings.. . . . . . . . . . . . . . . . 24

Technical Specifications System Requirements. . . . . . . . . . . . . . . . . . . . . . 25

For Windows. . . . . . . . . . . . . . . . . . . . . . . . . . 25 For Mac OS X. . . . . . . . . . . . . . . . . . . . . . . . . . 25

Network Interface Panel Specifications. . . . . . . . . . 25 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Mechanical. . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Electrical. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Environmental. . . . . . . . . . . . . . . . . . . . . . . . . 26 Interfaces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Standard and Approvals. . . . . . . . . . . . . . . . . . 26

Network Interface Panel User's Guide

Contents

2

Copyright and Trademarks

No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product.

Seiko Epson Corporation and its affiliates shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

EPSON is a registered trademark, and EPSON EXCEED YOUR VISION or EXCEED YOUR VISION are trademarks of Seiko Epson Corporation. Microsoft, Windows, and Windows Vista are registered trademarks of Microsoft Corporation.

Apple, Macintosh and Mac OS are registered trademarks of Apple Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective companies.

Copyright 2014 Seiko Epson Corporation. All rights reserved.

Network Interface Panel User's Guide

Copyright and Trademarks

3

Safety Instructions

Important Safety Instructions

Read all these instructions and save them for later reference.

Follow all warnings and instructions marked on the Network Interface Panel.

Do not spill liquid onto the Network Interface Panel.

Except as specifically explained in this Users Guide, do not attempt to service the Network Interface Panel yourself.

Cautions and Notes

In this document, cautions and notes indicate the following:

!Cautions must be followed carefully to avoid bodily injury.

Notes contain important information and useful tips on the operation of this product.

Network Interface Panel User's Guide

Safety Instructions

4

Getting to Know Your Network Interface Panel

Package Contents

a Network Interface Panel This product.

b Screws (2 pieces) Fixes the Network Interface Panel to the scanner.

c Covers (4 pieces) Spare covers for the screw holes. Because the size of the covers differs depending on the model, make sure you use the covers that match the size of the scanner being used.

d Cable Clips (2 pieces) Fixes the network cable to the scanner.

e Pin Use this to remove the screw hole covers.

f Allen Key Use this to tighten and remove the screws.

g Setup Guide The paper manual for this product.

Network Interface Panel User's Guide

Getting to Know Your Network Interface Panel

5

Using the Cable Clips

A Attach the cable clips to the scanner.

Note: Attach so that the opening of the cable clip is facing out.

B Use the cable clips to fix the network cable to the scanner.

Network Interface Panel User's Guide

Getting to Know Your Network Interface Panel

6

Panel parts

Front view

Right side view

a F setting button Make product and network settings, or perform maintenance.

b & Reset button Resets the panel to the initial screen.

c y Stop button Cancels scanning.

d ] start button Starts scanning. In a network environment, the ] start button on the scanner works the same way as clicking Scan in the Document Capture Pro or Epson Scan window.

e Z/Arrow button Use the arrow buttons to select an item, and then press Z to confirm the selection.

f Error light (orange) On when an error has occurred.

g Ready light (green) On when the scanner is ready.

Off when the scanner is not ready.

h LCD panel Displays the status, operation, and error messages.

i Network connector Connects the network cable.

Network Interface Panel User's Guide

Getting to Know Your Network Interface Panel

7

Setting Up the Network Interface Panel

Connecting the Network Interface Panel to a Network

A Turn off the product and disconnect the USB cable.

B Remove the covers with the pin, and then remove the screws with the allen key.

!Caution: Be careful when setting up as the pin and the allen key are sharp and may cause injury.

Note: Use only the pin and allen key that comes with this panel.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

8

C Remove the panel supplied with your scanner.

Note: Keep the panel in a safe place.

You cannot use the scanner unless you replace the panel you removed in step 3, or attach the Network Interface Panel.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

9

D Install the Network Interface Panel.

E Tighten the screws, and then replace the covers.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

10

Note: Use the same covers and screws that you removed in step 2.

F Connect a network cable to the Network Interface Panel.

Note: You must use a Category 5 shielded twisted-pair cable to connect the Network Interface Panel to prevent

malfunction.

The network cable is not supplied with the product.

You cannot use a network cable at the same time as a USB connection.

G Fix the network cable using the cable clips.

U Using the Cable Clips on page 6

Configuring Scanning Software on Your Computer

Connecting to an IPv4 Network Automatically

A Turn on your scanner.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

11

B When the home screen ("Scanner is ready") is displayed, press the F setting button.

C Select Network with the u up and d down buttons, and then press the Z button.

D Select IPv4 with the u up and d down buttons, and then press the Z button.

E Select Auto with the u up and d down buttons, and then press the Z button.

F Press the F setting button to return to the home screen.

G After "Configuring network setting" is displayed, restart the panel.

Set the password for protecting network security using Web-based EpsonNet Config. U Using EpsonNet Config on page 14

Connecting to an IPv4 Network Manually

A Turn on your scanner.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

12

B When the home screen ("Scanner is ready") is displayed, press the F setting button.

C Select Network with the u up and d down buttons, and then press the Z button.

D Select IPv4 with the u up and d down buttons, and then press the Z button.

E Select Manual with the u up and d down buttons, and then press the Z button.

F Select IP address with the u up and d down buttons, and then press the Z button.

G Set the IP address with the arrow buttons, and then press the Z button.

H Repeat steps 6 and 7 to set the IP subnet mask and IP default gateway settings, and then press the Z button.

I Press the F setting button to return to the home screen.

J After "Configuring network setting" is displayed, restart the panel.

Set the password for protecting network security using Web-based EpsonNet Config. U Using EpsonNet Config on page 14

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

13

Connecting to an IPv6 Network

A Turn on your scanner.

B When the home screen ("Scanner is ready") is displayed, press the F setting button.

C Select Network with the u up and d down buttons, and then press the Z button.

D Select IPv6 - On with the u up and d down buttons, and then press the Z button.

E Press the F setting button to return to the home screen.

F After "Configuring network setting" is displayed, restart the panel.

Note: Use the Web-based EpsonNet Config to make manual settings for IPv6.

Set the password for protecting network security using Web-based EpsonNet Config. U Using EpsonNet Config on page 14

Using EpsonNet Config

Web-based EpsonNet Config is software that is stored on the Network Interface Panel.

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

14

You can launch the software from a computer on the network using a Web browser and so on. You can make network interface settings (TCP/IP and so on) and scanner settings (various checks and settings).

To start Web-based EpsonNet Config, enter the IP address for this panel in the address bar of a Web browser.

Note: Web-based EpsonNet Config cannot be used if the IP address has not been set in the network interface.

See EpsonNet Config online help for more details.

Note: You can also use EpsonNet Config for Windows/Macintosh.

EpsonNet Config for Windows is a Windows-based configuration utility for administrators that allows you to configure the network interface for various protocols such as TCP/IP, MS Network, AppleTalk, IPP, and SNMP.

EpsonNet Config for Macintosh is a Macintosh-based configuration utility for administrators that allows you to configure the network interface for TCP/IP, AppleTalk, and IPP.

Download this software from:

http://www.epson.com/

Operating Environment

You can use Web-based EpsonNet Config on computers with the following Web browsers.

Supported Web Browsers Web Browser Version

Microsoft Internet Explorer IE8.0 or later

Mozilla FireFox Ver 3.5 or later

Safari Ver 4.0 or later

Google Chrome Ver 4.0 or later

Opera Ver 10.0 or later

Network Interface Panel User's Guide

Setting Up the Network Interface Panel

15

Scanning an Image

Configuring Scanning Software on Your Computer

Make sure your scanner and Network Interface Panel are turned on and working properly. Then follow the steps below to use the Epson Scan Settings program to enable network scanning.

Before you start, obtain the following information:

A valid IP address for the Network Interface Panel. Ask your network administrator for an IP address which will not cause conflict with any other device on the network. If you are the network administrator, choose an address within the subnet which will not cause conflict with any other device.

The MAC (Ethernet hardware) address of the Network Interface Panel. This is a unique number for your Network Interface Panel which is different from the hardware serial number of the Network Interface Panel. You can find out the MAC address on the Network Interface Panel.

Note for Windows: Log in as a user with administrators authority, and then install. If you are asked to enter an administrators password, enter the password, and then continue with the operations.

Note for Mac OS X: Do not use the Fast User Switching function while using your scanner.

You must log on to a Computer Administrator account.

Note: You need to install the latest firmware for the Network Interface Panel before scanning. Go to the Epson home page to download the Epson Firmware Updater for the Network Interface Panel. U http://www.epson.com After downloading, start Epson Firmware Updater, and then follow the on-screen instructions. If the latest firmware is already installed on the Network Interface Panel, you do not need to update the firmware.

A Obtain the IP address or host name of the Network Interface Panel from your network administrator.

B Start Epson Scan Settings.

Windows: Start > All Programs or Programs > EPSON > EPSON Scan > EPSON Scan Settings

Mac OS X: Select Applications > EPSON Software > EPSON Scan Settings.

C Select your scanner from the Select Scanner drop-down list.

Network Interface Panel User's Guide

Scanning an Image

16

D Select Network, then click Add.

E In the Add window, choose the Network Interface Panels IP address under Search for addresses, or select Enter address and type in the address. Then click OK.

F In the Epson Scan Settings window, click Test to check the connection. If everything works properly, you see a successful connection message appears.

G Click OK to save the settings.

Scanning Over a Network

Note: You must set the IP address for your Network Interface Panel before you can scan using it.

Note for Windows: You need to install the latest Document Capture Pro before scanning. Go to the Epson home page to download the latest Document Capture Pro. U http://www.epson.com If the latest software is already installed on your computer, you do not need to update the software.

Network Interface Panel User's Guide

Scanning an Image

17

For Windows

A Turn on your scanner and the client computer.

B Place your original(s) on the document glass or in the Automatic Document Feeder (ADF).

C Start Document Capture Pro.

U See the users guide of the scanner for more details.

D Click Scan on the Document Capture Pro Main window.

E Make necessary settings on Main Settings, and then click Scan.

For Mac OS X

A Turn on your scanner and the client computer.

B Place your original(s) on the document glass or in the Automatic Document Feeder (ADF).

C Start Epson Scan.

U See the users guide of the scanner for more details.

D Select your desired mode.

E In the Epson Scan window, make the appropriate settings.

F Click Scan.

Scanning from the Panel

Set up a job in advance.

U See the users guide of the scanner for more details.

A Turn on your scanner and the client computer.

B Place your original(s) on the document glass or in the Automatic Document Feeder (ADF).

Network Interface Panel User's Guide

Scanning an Image

18

C Press the Z button on the panel.

The scanner searches for an available computer.

D Select the computer you want to send the data to, and then press the Z button.

If a group is set for the scanner, you need to set the same group on the computer if you want to display it on the panel.

E Enter the password.

If the password entry screen is not displayed, go to the next step.

U See the Document Capture Pro help for more details.

F Select a job, and then press the Z button.

G Check the settings, and then press the ] start button on the scanner.

Network Interface Panel User's Guide

Scanning an Image

19

About the Control Panel

Menu List

Environment menu

Item Description

Network You can check network settings such as the MAC address and IP address.

Maintenance You can check the number of scanned sheets. If the scanner being used has an Automatic Document Feeder installed, you can check or reset the number of scanned sheets for the Roller Assembly Kit, Pickup Roller, Separation Pad, and Separation Roller.

Display menu

Item Description

Language Specifies the language displayed on the LCD panel.

Brightness Adjusts the brightness of the LCD panel. Use the u and d buttons to set the contrast between -2 (darker) and +2 (brighter).

Contrast Adjusts the contrast of the LCD panel. Use the u and d buttons to set the contrast between -2 (lowest contrast) and +2 (highest contrast).

Restore settings Select Yes and then press the Z button to return the settings in the Display menu to their default values.

Energy saving menu

Item Description

Power Off Timer Specifies the length of time before the scanner enters power off mode if no operations are made.

Sleep Specifies the length of time before the scanner enters sleep mode if no operations are made.

Restore settings Select Yes and then press the Z button to return the settings in the Energy saving menu to their default values.

Network menu

Note: This is not displayed if a password is set for this panel in EpsonNet Config.

Network Interface Panel User's Guide

About the Control Panel

20

Item Description

IPv4 Select whether the IP address is set automatically or manually. If Manual is selected, you can set the value for IP address, IP subnet mask, and IP default gateway.

Link Speed Specifies the transmission speed of the network interface.

IPv6 Specifies the IPv6 setting.

Mode Select the mode from Client or Server.

Group Specifies the group number of the scanner.

Restore settings Select Yes and then press the Z button to return the settings in the Network menu to their default values.

Restore settings menu

Select Yes and then press the Z button to return the settings for all menus to their default values.

Network Interface Panel User's Guide

About the Control Panel

21

Troubleshooting

Problems Indicated by Messages on the LCD Panel or Status Lights

You can check the status of the scanner and the Network Interface Panel from messages on the LCD panel and the status lights.

Clear the error according to the message displayed.

The following table explains the light patterns and the main statuses.

Ready Light Error Light Status

On Off Scanning can be performed.

Off On The scanner has not been recognized.

A network related error has occurred.

An error such as a paper jam has occurred in the scanner.

Off Off The scanner is in sleep mode.

A job is being cancelled.

The PC/server on the network has not been recognized.

Blink Off Scanning.

Searching for or connecting to a network.

Blink Blink The firmware is being updated.

If the following messages are displayed, turn off the scanner and then turn it back on again. Also, check the network connection and settings.

If this does not correct the problem, see the scanner Users Guide or consult your dealer.

Network error

Network fatal error

Scanner error

No reply received

Problems and Solution

This section provides solutions to problems you may have.

Refer to the Troubleshooting section in the users guide of the scanner if you have problems with the software. The online help also provides versatile tips and other information helpful for problem-solving.

Network Interface Panel User's Guide

Troubleshooting

22

If you cannot solve a problem after reading and following the information in this chapter, contact your dealer or a qualified customer support person for assistance.

The LCD screen is not displayed even when the scanner is on.

Check that the Network Interface Panel is connected correctly.

U Connecting the Network Interface Panel to a Network on page 8

Check that the supported scanner is connected to the Network Interface Panel.

U Refer to the Epson Web site for supported scanners.

The scanner does not scan.

Check that the scanner is turned on.

U Connecting the Network Interface Panel to a Network on page 8

Check that the scanner is compatible with the Network Interface Panel.

U See the users guide of the scanner for more details.

Check that the network cable is connected securely.

U Connecting the Network Interface Panel to a Network on page 8

Turn off the scanner and make sure the Network Interface Panel is properly installed in your scanner and connected to the network.

U Connecting the Network Interface Panel to a Network on page 8

Check that the network cable is working correctly by connecting it to other products.

U Connecting the Network Interface Panel to a Network on page 8

Check that Epson Scan Settings have been set correctly.

U See the users guide of the scanner for more details.

Check that the scanning software has been installed correctly.

U See the help came with each software for more details.

Check that the scanner used with the scanning software has been selected.

U See the help came with each software for more details.

Check that Network Scanning Settings from Document Capture Pro/Epson Event Manager have been set correctly.

U See the help came with each software for more details.

Network Interface Panel User's Guide

Troubleshooting

23

In Network Scanning Settings, check that the Group settings for Document Capture Pro are the same as the settings for Network Interface Panel.

U See the Document Capture Pro help for more details.

U Scanning from the Panel on page 18

Check that Epson Event Manager (Document Capture Pro) is not being blocked by a Firewall.

U See the users guide of the scanner for more details.

Check that the IP address is set correctly.

U See the users guide of the scanner for more details.

Check that there are several network interface panel (scanner) on the network.

On your computer, recognise the scanner using MAC address of this product.

U Environment menu on page 20

Web-based EpsonNet Config cannot be started or be made settings.

Check that IPv4 address is set to this product.

To start Web-based EpsonNet Config, set IP address first. You can set from this product control panel or from EpsonNet Config for Windows/Macintosh.You can check the current setting from the control panel menu.

U Menu List on page 20

Network Interface Panel User's Guide

Troubleshooting

24

Technical Specifications

System Requirements

Make sure your system meets the requirements in these sections before using it with your product.

For Windows

System Microsoft Windows 8.1, Windows 8, Windows 7, Windows Vista, Windows XP Home Edition, Windows XP Professional Edition, Windows XP Professional x64 Edition

For Mac OS X

System Mac OS X v10.4.11, 10.5.x, 10.6.x, 10.7.x (OS X Lion) and 10.8.x (OS X Mountain Lion). Fast User Switching on Mac OS X is not supported.

Note: Epson Scan does not support the UNIX File System (UFS) for Mac OS X. You must install Epson Scan on a disk or in a partition that does not use UFS.

Network Interface Panel Specifications

Note: Specifications are subject to change without notice.

General

Product code B12B808411

DSPNNW1

Display LCD (Liquid Crystal Display)

Mechanical

Dimensions Height: 68 mm (2.6 inches)

Width: 161 mm (6.3 inches)

Depth: 84 mm (3.3 inches)

Weight Approx. 300 g (About 0.66 lb)

Network Interface Panel User's Guide

Technical Specifications

25

Electrical

Power consumption Operating: Maximum 7.5 W

Rated input voltage DC 5 V

Input voltage DC 4.75 to 5.25 V

Rated input current 1.5 A

Note: Power consumption varies depending on operating conditions and whether an option is installed.

Environmental

Temperature Operating: 5 to 35 C (41 to 95 F)

Storage: -25 to 60 C (-13 to 140 F)

Humidity Operating: 10 to 85 % (without condensation)

Storage: 10 to 90 % (without condensation)

Operating conditions Ordinary office or home conditions.

Avoid operating the product in direct sunlight, near a strong light source, or in extremely dusty conditions.

Interfaces

Scanner Interface USB via dedicated scanner interface connector

Network Interface 10BASE-T/100BASE-TX/1000BASE-T

Standard and Approvals

U.S. model:

EMC FCC Part 15 Subpart B Class B

European model:

EMC Directive 2004/108/EC EN55022 Class B

EN55024

European model (for Russian users):

Network Interface Panel User's Guide

Technical Specifications

26

Australian model:

EMC AS/NZS CISPR22 Class B

Network Interface Panel User's Guide

Technical Specifications<