Contents

Epson C82605 User's Guide PDF

1 of 50
1 of 50

Summary of Content for Epson C82605 User's Guide PDF

EPSON

English

Deutsch

Franais

Espaol

Italiano

INTRACORPORATION

EPSON AMERICA. INC.

DATE:

TO:

FROM:

PHONE:

October 22, 1992

Distribution

Tim Johnson Assistant Manager, Editorial MS D2-02

4032

SUBJECT: Epson PostScript Card Supplement to the manual

According to our agreement with Adobe, owners of the Epson PostScript Card have the right to get the Supplement to the manual. The supplement is very technical and will probably not be requested. Therefore, neither SEC nor EAI will publish the manual, but Robert Shibata, Lead Product Support Specialist, will have a copy. If any users want the manual, Robert can send them a copy.

Please call me if you have any questions.

Tim Johnson

Distribution:

Moira Ewings Robert Shibata Guy Walker

I EPSON OVERSEAS MARKETING LOCATIONS 1

EPSON AMERICA, INC. 20770 Madrona Avenue Torrance CA 90503, U.S.A. Phone: (310) 782-0770 Fax: (310) 782-5248

EPSON DEUTSCHLAND GmbH Zlpicher Stral3e 6, 4000 Dsseldorf 11 F.R. Germany Phone: (02 11) 56030 Telex: 8584786

EPSON UK LTD. Campus 100, Maylands Avenue, Hemel Hempstead, Herts, HP2 7EZ, U.K. Phone: 442-6 1 144 Telex: 5 182467

EPSON FRANCE S.A. 68 bis, rue Marjolin 92300, Levallois-Perret, France Phone: (1) 4087-3737 Telex: 6 10657

EPSON AUSTRALIA PTY. LTD. EPSON SINGAPORE PTE. LTD. Unit 3, 17 Rodborough Road, No. 1 Raffles Place #26-00 Frenchs Forest, NSW 2086, Australia OUB Centre, Singapore 0 104 Phone: (2) 452.0666 Phone: 5330477 Fax: (2) 975-1409 Fax: 5338 119

EPSON HONG KONG LTD. 25/F, Harbour Centre, 25 Harbour Road, Wanchai, Hong Kong Phone: 5854600 Telex: 65542

EPSON ELECTRONICS TRADING LTD. (TAIWAN BRANCH) 10F, No. 287 Nanking E. Road, Sec. 3. Taipei, Taiwan, R.O.C. Phone: (02) 7 17-7360 Fax: (02) 7 12-9 164

EPSON ITALIA S.p.A. V.le F.lli Casiraghi 427 20099 Sesto S.Giovanni Ml, Italy Phone: 2-26233 1 Fax: 2.2440750

EPSON IBERICA S.A. Av. de Roma, 18-26 08290 Cerdanyola del Valles Barcelona, Spain Phone: 582.15.00 Fax: 582.15.55

SEIKO EPSON CORPORATION (Hirooka Office) 80 Harashinden, Hirooka Shiojiri-shi, Nagano-ken 399-07 Japan Phone: (0263) 52-2552

1991 Nov.

EPSON PostScriptTM CARD

C82605*

Users Guide

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. While every precaution has been taken in the preparation of this book, Seiko Epson Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

This manual, the PostScript software, and the coded font programs described in this manual are registered and copyrighted. The copyright of this manual is owned by Seiko Epson Corporation and the copyrights of the software and coded font programs described in this manual are owned by Adobe Systems Incorporated and are registered in the U.S. Patent and Trademark Office.

APPLE COMPUTER, INC. (APPLE) MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, REGARDING THE APPLE SOFTWARE. APPLE DOES NOT WARRANT, GUARANTEE OR MAKE ANY PRESENTATIONS REGARDING THE USE OR THE RESULT OF THE USE OF THE APPLE SOFTWARE IN TERMS OF ITS CORRECTNESS, ACCURACY, RELIABILITY, CURRENTNESS OR OTHERWISE. THE ENTIRE RISK AS TO THE RESULTS AND PERFORMANCE OF THE APPLE SOFTWARE IS ASSUMED BY YOU. THE EXCLUSION OF IMPLIED WARRANTIES IS NOT PERMITTED BY SOME STATES. THE ABOVE EXCLUSION MAY NOT APPLY TO YOU.

IN NO EVENT WILL APPLE, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE TO YOU FOR ANY CONSEQUENTIAL, INCIDENTAL OR INDIRECT DAMAGES (INCLUDING DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, AND THE LIKE) ARISING OUT OF THE USE OR INABILITY TO USE THE APPLE SOFTWARE EVEN IF APPLE HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. BECAUSE SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATIONS MAY NOT APPLY TO YOU.

EPSON is a registered trademark of Seiko Epson Corporation

PostScript is a trademark or a registered trademark of Adobe Systems Incorporated.

Aldus and PageMaker are registered trademarks of Aldus Corporation.

Apple, AppleTalk, LaserWriter, LocalTalk and Macintosh are trademarks or registered trademarks of Apple Computer, Inc.

Centronics is a trademark of Centronics Data Computer Corporation

LaserJet, LaserJet+, LaserJet 500, LaserJet series II, and LaserJet III are trademarks or registered trademarks of Hewlett-Packard Company.

IBM, IBM PC, and OS/2 are trademarks or registered trademarks of International Business Machines Corporation.

ITC Avant Garde, ITC Bookman, ITC Zapf Chancery, ITC Zapf Dingbats, and Stone are registered trademarks of International Typeface Corporation.

Helvetica, Palatino, and Times are trademarks of Linotype AG and/or its subsidiaries.

Microsoft and Windows are trademarks or registered trademarks of Microsoft Corporation

Copyright 1991 by Seiko Epson Corporation

Nagano, Japan

Contents

Introduction i i i

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ........ iii Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V

Chapter 1 Handling the PostScript CARD 1-1

Care and Handling ............................................................... 1-1 Installing the Card ................................................................ 1-2 Selecting PostScript .............................................................. 1-3 Printer Selection Menus.. ..................................................... 1-6 Removing the Card .............................................................. 1-7

Chapter 2 Using the PostScript CARD 2-1

The Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 SelecType . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2

Chapter 3 Installing Screen Fonts and Drivers 3-1

Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-11

Appendix A The Namer A-1

Appendix B Character Tables (At the end of this gu B-1

Contents i

Introduction

Features

TMThe PostScript CARD gives your Epson page printer the capabilities of true Adobe PostScript. The card provides you with the following features for high performance with todays desktop publishing:

l The Adobe PostScript Language. This powerful printer language easily rotates, scales, clips, and orients any graphic object on your page. Choose from the wide range of application programs written for PostScript printers for professional results.

l 35 fonts in 11 font families: TimesTM, HelveticaTM, Courier, Symbol, Avant Garde, Bookman, Helvetica Narrow, New Century Schoolbook, PalatinoTM, Zapf Chancery, and Zapf Dingbats

. Epson quality, reliability, and ease of operation.

Introduct ion iii

Features

This manual is a supplement to your printer manual. It gives you the additional information necessary to use the PostScript CARD with your printer. Keep these manuals together.

iv Introduction

Precautions

Available printers

This card can work with the page printers listed below:

EPL-7000/7100/7050C

EPL-4000/4100, ActionLaser

It does not work with these printers:

GQ-3500, GQ-5000

EPJ-200, EPI-4000

EPL-6000, ActionLaser, ActionLaser PLUS

If your printer is not listed above, ask your Epson dealer whether this card can be used with your printer.

Required memory

Before using the card, make sure your printer has more than 1.5 megabytes (MB) of memory. If you connect your printer to more than one computer, you must assign at least 1.5 MB of printer memory to the channel using the PostScript CARD. See your printer users guide for more details.

Note: . You cannot assign the PostScript mode to more than one

channel even if your printer has more than 3.0 MB of memory.

l When the memory is insufficient for your paper size, the printing area might be clipped. Minimize the receive buffer size and the FULL PRINT setting, or both, using SelecType or install extra memory.

Introduction v

Precautions

Available interfaces

Unless you are using a MacintoshTM, you can use any built-in or optional interface to connect your printer to your computer.

Note for Macintosh users: When you install this PostScript CARD in your printer, you can connect it to your Macintosh with the optional LocalTalkTM

interface C82312*. Do not use the serial interface for this purpose, because the Macintosh does not have a printer driver for the serial interface.

For EPL-7000/7100 Users

l Your printer always reprints jammed pages after a paper jam error is corrected, even if JAM RECOVERY is OFF.

l You may get a PAPER SIZE ERROR if you try to print on a paper size that cannot be selected with SelecType. If this error occurs, press RESET until the display shows RESET.

l When your printer is used with two computers, the PostScript CARD should be used with channel S. If you want to use the card with channel P, set the MEMORY menu to S 0:10P.

l You cannot connect the EPL-7000/7100 to a Macintosh computer.

vi Introduction

Precautions

For EPL-4000/4100/ActionLaserII users

If you are using your printer with more than one computer and you are using an optional interface, you must use the PostScript CARD with the optional interface.

If you are using more than one computer but not using an optional interface, you must use the PostScript CARD with the serial interface.

Introduction vii

Chapter 1 Handling the PostScript CARD

Care and Handling

Do not drop, crush, or bend the card. Its natural curvature does not affect operation, so do not try to straighten the card by bending it.

Avoid touching the gold connectors along the cards edge.

If the card becomes dirty, clean the connectors by wiping the edge with a clean tissue. Do not use water, alcohol, or other solvents.

Keep the card in the protective case and blue antistatic bag when you are not using it.

Do not store the card in direct sunlight or near a heat source. When stored, the card can withstand from -30C to 65C (-20F to 150F) temperatures and up to 90% humidity.

Be careful when you insert and remove the card. You can damage it by inserting it the wrong way or using too much force.

Handing the PostScript CARD l - l

Installing the Card

Insert the card only when the printer is turned off.

Always insert it into slot A of your printer.

If the slot is horizontal, insert the card with the Epson logo on the upper side of the card. If the slot is vertical, insert the card so the Epson logo faces the A label. Follow the steps below to install the card:

1. Turn off the printer.

2. Hold the card so that the arrow on the card is aligned with the arrow on slot A.

3. Gently slide the card into the slot until it locks in place.

4. Turn on the printer.

Once you insert the PostScript CARD, you can select it using SelecType.

Note: l Make sure your printer has at least 1.5 MB of memory,

including an optional expanded memory board or chips. You will get an error message if you select the PostScript CARD when not enough memory is installed.

l Do not insert the card while the printer is turned on. If an error occurs, refer to your printer manual for instructions.

1-2 Handing the PostScript CARD

Selecting PostScript

Because your printer is set to operate in one of the resident printer modes, you need to change the mode setting through SelecType before you can use the PostScript option.

If you are not familiar with SelecType, see your printer manual. You may also find it helpful to refer to the Quick Reference card (located at the back of the manual) whenever you use SelecType.

First, find the MODE or MODE ASSIGN menu in your SelecType map. (The menu for changing the printer mode is not identical in all printers.) You can change the printer mode to PS from these menus.

The following two sets of steps describe how to change the printer mode for the EPL-4000/4100, ActionLaserII, and the EPL-7000/7100 printers. See your printer manual for more details.

Handing the PostScript CARD 1-3

Selecting PostScript

For EPL-4000/4100 and ActionLaser users

1.

2.

Hold down the SelecType button for several seconds until the display shows SelecType LEVEL2.

Press the Aor vbutton until the MODE ASSIGN menu appears.

3.

4.

Press the bbutton to enter the option; the CH submenu (for example, $ CH P LQ >) appears.

Press the Aor vbutton to choose the interface that will use the PostScript CARD. (If your desired interface is displayed in step 3, ignore this step).

5. Press the bbutton to enter the printer mode option. You see the + icon, which means the displayed printer mode is currently selected.

6. Press the Aor vbutton until the 0 PS option appears.

7. Press the bbutton to set the PostScript mode.

8. Press the SelecType button three times to exit SelecType.

The PostScript mode remains in effect until you change the setting or turn off the printer. If you wish to make this setting permanent, use the P-CONFIG. SAVE menu in SelecType Level 2. See your printer manual.

1-4 Handing the PostScript CARD

Selecting PostScript

For EPL-7000/7100 users

1.

2.

Hold down the SelecType button for several seconds until you enter SelecType Level 2. A SelecType Level 1 option is displayed briefly before the printer enters the Level 2 main menu.

Press the Aor vbutton until the CH CONFIG P,S menu appears.

3.

4.

5.

Press the bbutton to enter the option; one of the submenus (MODE, I/F, or RX-/BUFFER) appears.

Press theA or vbutton until the MODE submenu appears. If this menu is displayed in step 3, ignore this step.

Press the bbutton to enter the option; one of the options and the El icon appear.

6. Press the Aor vbutton until the # PS option appears.

7. Press the bbutton to set the PS option.

8. Press the SelecType button once to exit SelecType.

The PS mode remains in effect until you change the setting or turn off the printer. If you want to make this setting permanent, use the P-CONFIG. SAVE menu in SelecType Level 2. See your printer manual.

Handing the PostScript CARD 1-5

Printer Selection Menus

Now that you have installed the PostScript option in your printer, you can start using it with your application programs.

Most programs let you specify the type of printer you are using from a list of printers in the setup procedure. If your program has a printer selection menu, choose one of the printers listed below. They are listed in order of preference:

EPSON PostScript CARD

EPL-7500

General PostScript Printer

LaserWriter

If none these printers is available, choose any printer that uses the PostScript language.

1-6 Handing the PostScript CARD

Removing the Card

Follow these steps if you need to remove the card:

1. Make sure the printer is turned off.

2. Remove the card by grasping it at the center and gently pulling it straight out.

Never insert or remove the card while the printer is turned

3. Turn on the printer.

If the CH. (EPL-7000/7100) or the FEED light is flashing, press FEED; the printer then prints one page of data from the buffer.

Note: Never remove this card while the printer is on line, in SelecType mode, or while resetting. If you do, a REINSERT CARD, REMOVE CARD, or SERVICE REQ. message may appear on the display. See the section on card error messages in your printer manual.

Handing the PostScript CARD 1-7

Chapter 2 Using the PostScript CARD

The Control Panel

Your printer control panel operates nearly the same with the PostScript CARD as it does with other emulation modes. This chapter describes the control panel functions.

SelecType button

Enter or exit SelecType with this button.

FEED button

Print one page of data by pressing this button when the printer is off line and has data in its memory. Print out all data in the printers memory by pressing the ON LINE button after you press the FEED button.

RESET button

Initialize certain printer settings with this button. See your printer manual for details.

CH. light (EPL-7000/7100) or FEED light

These lights are on when print data is stored in the printers memory.

Using the PostScript CARD 2-1

SelecType

You can make various printer settings using SelecType. Although normal SelecType functions differ slightly by printer model, the menus added by this emulation are identical for each printer. The following section describes the SelecType menus and explains these additional functions. See your printer manual for more details on other menus.

SelecType Tables for this Card

Your printer has two SelecType levels : level 1 and level 2. When PostScript is selected for the current printer mode, the level 1 menu changes as described below. However, the level 2 menu does not change.

SelecType Level 1 Table

menu (submenu) function

INPUT* Selects the input paper path

OUTPUT* Selects the output paper path

P-SIZE STD* Sets the paper size set in the standard paper tray

P-SIZE OPT* Sets the paper size set in the optional paper tray

MISCELLANEOUS This menu includes following submenus.

STATUS SHEET Prints out a status sheet

START PAGE Determines whether the start page will be printed or not

L-OFFSET Adjusts the horizontal printing position on the paper

T-OFFSET Adjusts the vertical printing position on the paper

PAGETYPE Sets the print area

JAM RECOVERY** Determines whether the jam recovery printing is performed or not

2-2 Using the PostScript CARD

SelecType

menu

(MISCELLANEOUS)

(submenu)

ERR HANDLER

function

Enables/disables the error handler function

PAGES ( Displays counter of printed pages

VERSION ( Displays the PostScript version

SAVE LEVEL 1 1 Saves SelecType level 1 settings 1

RES LEVEL 1 ( Resets SelecType level 1 settings

* Varies depending on the printer. Also, the paper tray may be called by another term such as paper cassette.

*2 Ignore this menu item for the EP-7000/7100.

SelecType level 2

Level 2 menus are not affected by this emulation. See your printer manual.

Menus for PostScript

This section describes the function of the above menus when the PostScript CARD is installed. See your printer manual for details on menus not shown below.

Note: l Not all menus of the PostScript CARD may be available with

your printer.

l If you change the settings, your changed settings are enabled when you exit SelecType.

Using the PostScript CARD 2-3

SelecType

Main menus

INPUT

AUTO MANUAL

+ STD OPT

AUTO

Selects the location from which the paper is fed. The type of the paper tray may be called paper cassette or lower paper cassette, depending on the printer model.

Tells the printer to load paper from the paper tray containing the size of paper specified by the P-SIZE menus. If both paper trays contain the specified paper size, the printer loads paper from the optional paper tray until it is empty, then switches to the standard paper tray.

MANUAL Feeds paper from the manual feed paper path

STD Feeds paper from the standard paper tray

OPT Feeds paper from the optional paper tray

The factory setting is STD.

OUTPUT

UP + DOWN

Selects the output paper path. If your printer has the automatic output paper path control feature, you can select the default setting, either face up or face down, with this menu.

2-4 Using the PostScript CARD

SelecType

P-SIZE STD (and P-SIZE OPT)

+ A 4 A5 B5 GLT GLG EXE F4

+ L T HLT LG

Sets the paper size in the standard (or optional) paper tray. The following paper sizes are available: A4, A5, B5, LT(Letter), LG(Legal), HLT(Half- Letter), EXE(Executive), GLG(Government Legal), GLT(Government Letter), F4 The factory setting is A4 or LT. (The factory setting varies by printer model.)

Submenus of the MISCELLANEOUS menu

STATUS SHEET

If you perform this option, the printer prints out a status sheet showing the PostScript version, font names, the printers memory size, etc.

START PAGE

ON + OFF

Determines whether or not a status sheet is printed when PostScript is selected. If ON, a status sheet is always printed when the PostScript mode is selected. If OFF, the status sheet is not printed when PostScript is selected.

Using the PostScript CARD 2-5

SelecType

L-OFFSET

from -64 to -1

from 1 to 63

T-OFFSET

from -64 to -1 -0

from 1 to 63

PAGETYPE

+ FULL NOTE

Makes fine adjustments in the horizontal printing position (left offset) on the page. The setting is in dots; the size of each dot varies depending on the printer. For example, EPL-4100 is a 300-dpi printer, so the dot size is 1/300 inch (0.0846 mm). In this case, you can use this submenu to move the printing on the page approximately 1/5 inch to the left (settings from -64 to -1) or to the right (settings from 1 to 63). The factory setting is 0.

Makes fine adjustments in the vertical printing position (top offset) on the page. The setting is in dots; the size of each dot varies depending on the printer. For example, the EPL-4100 is a 300 dpi printer, so the dot size is 1/300 inch (0.0846 mm). In this case, you can use this submenu to raise or lower the printing on the page approximately 1/5 inch. The factory setting is 0.

Sets the memory area. Your printer maintains a memory area for processing printing data. There are two sizes of memory area. If the FULL option is selected, your printer maintains a large memory area. If the NOTE option is selected, it maintains a small memory area. If you print on LG (legal), GLG (government legal), or F4 size paper, you should expand your printers memory or the image of your output might be clipped.

2-6 Using the PostScript CARD

SelecType

JAM RECOVERY

+ O N Determines whether or not a page is reprinted OFF after a paper jam is cleared. If ON is selected

and a paper jam occurs, the page is reprinted after the jam is cleared. If OFF is selected, the jammed page is not automatically reprinted. You may want to select OFF because complex pages may print faster.

ERR HANDLER

+ OFF ON

Enables/disables the error handler function. This function prints out an error report sheet. If ON is selected, PostScript errors are printed on the paper when they occur. If OFF is selected, they are not. This feature can be convenient for programmers using the parallel interface.

PAGES

Displays the printed page counter. The number shown is the number of pages printed since the printer was manufactured.

VERSION

Displays the PostScript version.

SAVE LEVEL 1

Saves the current SelecType level 1 settings.

RES LEVEL 1

Resets the SelecType level 1 settings to their defaults. You can change the default paper size for PostScript mode using this menu.

Using the PostScript CARD 2-7

Chapter 3 Installing Screen Fonts and Drivers

This chapter describes how to install the printer driver/screen font package in the Microsoft WindowsTM and MacintoshTM

environments.

Windows

To enable you to use your printer with Windows, a set of screen fonts and utility programs is included in this package. The following files are included on your disks:

l ????????.WPD and PRINTERS. INI files, providing special information necessary to match the PostScript printer driver provided with Windows to the PostScript CARD

l An install program for installing screen fonts and associated files

. Windows screen fonts and font-metrics files

l Conversion utilities for Windows (NEWFON.EXE)

If you are using Windows version 3.0 or later, follow the instructions in Installation for Windows 3.x. If you are using Windows version 2.x (2.0,2.1, etc.), follow the instructions in Installation for Windows 2.x.

Installing Screen Fonts and Drivers 3-1

Windows

Installation for Windows 3.x

To install printer drivers for Window 3.x, follow these steps:

1. Turn on your computer and start the Windows program.

2. Double click (open) the Main group.

3. Double click (open) the Control Panel.

4. Double click the Printers icon.

5. Click Add Printer.

6. Double click Apple Laser Writer II NT/NTX in the List of Printers.

7. Insert your Windows setup disk according to the message on the screen and press ENTER.

8. Click Configure.

9. Click Setup

10. Click Add printer.

11. Insert the Printer Drivers (MS-DOSTM Format) Disk 1 into Drive A:. Then click OK.

12. You see the printer names in the list box. Click your printer name. (If your printer is not displayed, select EPSON PostScript CARD shown at the top of the list.)

13. Click Add. You see the message Installation successful.

14. Click Done.

15. Change the Paper Source, Paper Size, Orientation, or Scaling settings if necessary. Then click OK to exit Setup.

Note: Not all settings can be enabled with every printer.

3-2 Installing Screen Fonts and Drivers

Windows

16. Select the port for your printer.

17. Click OK to exit the Printers-Configure window.

18. Click Active in the Status window. This connects the computer to your printer.

19. Double click PostScript Printer in the Installed Printers list to set your printer as the default.

20. Click OK to exit the Printers window.

21. Close the Control Panel.

Your printer is now installed.

PPD files and DIRLIST file

If you are using application software from Adobe Systems Inc., you may need to install the ????????.PPD file. Copy the ????????.PPD file to the subdirectory specified by the application software.

Use the specified PPD file in the subdirectory of the Printer Drivers (MS-DOSTM Format) Disk 1, because the PPD file is prepared for each printer. Read the DIRLIST file in the root directory of the disk to see the subdirectory that includes the PPD file for your printer. If you cannot find your printers name in the DIRLIST, use the PPD file in the root directory of the disk.

Installing Screen Fonts and Drivers 3-3

Windows

Running the screen-font installation program

Note: l You must install following items before beginning the screen

font install program:

Windows PostScript printer driver (and select it as the default printer)

The install program automatically updates the Windows configuration file and copies screen fonts and related files to the programs directory.

l Although Ventura Publisher font choices appear on the screen, you cannot install the Ventura fonts. They are not included in this utility program.

Select the Windows version you plan to use with your typeface package by following the steps below.

1. TMInsert the EPSON PostScript CARD Fonts (MS-DOSTM Format) Disk 1 in Drive A:. If you are still in Windows, exit to DOS.

2. Type A: and press the ENTER key.

3-4 Installing Screen Fonts and Drivers

Windows

3. Type WIN3INST and press the ENTER key again. If your Windows is not installed in the C:\ WINDOWS directory, type WIN3INST drive:\path and press the ENTER key. Then the following message appears:

Use this batch file to install the EPSON PS CARD screen fonts and font metric files into your Windows 3.x System subdirectory and WIN. INI file.

This batch file will perform the following operations: 1. Make a backup copy of WIN.INI named WIN_SAVE.INI. 2. Make a working copy of WIN.INI. 3. Run the font installer. 4. Update the WIN.INI file in your Windows directory.

You are expected to supply a path to your Windows subdirectory on the command line. If you do not supply a path, this batch file will use the default Windows directory of C:\WINDOWS and C:\WINDOWS\SYSTEM.

If you have not supplied a path on the command line and you did not install Windows using the default configuration, please type Control-C now and restart this batch file.

Strike a key when ready...

4. Press any key to proceed with the installation. Note that if the WIN.INI file does not exist in the directory c:\WINDOWS, the display shows the above screen again. In this case, press Control- C to quit the installation and restart from step 1 after confirming the directory in which you installed Windows.

Installing Screen Fonts and Drivers 3-5

Windows

5. You see the following on the screen:

The font installer asks the following question after this message:

Enter Windows [drive:\directoryl:_

Input C:\WINDOWS\SYSTEM and press ENTER.

Strike a key when ready...

Then press any key. The Adobe Typeface Package Installation program starts automatically.

Note: If you entered your original path for Windows at step 3, the last line is

drive\path\SYSTEM and press ENTER.

6. At the beginning of the Adobe Typeface Package Installation program, the screen displays the following :

ADOBE TYPEFACE PACKAGE INSTALLATION: Version 2.0

Welcome to the Adobe Typeface Package Install program. The installation procedure consists of the following steps:

1) Installation of the Font Metrics. 2) Installation of the Screen Font.

Press any key to continue... _

3-6 Installing Screen Fonts and Drivers

Windows

7. After you press a key, you see this screen. --.

ADOBE TYPEFACE PACKAGE INSTALLATION: Selecting Applications

Select the application(s) you plan to use with your Typeface Package.

~ Microsoft Windows Applications Version 2.0 and later Microsoft Windows Applications Version earlier than 2.0 Ventura Publisher

?Jwill scroll through available applications ENTER key will either select or deselect an application Select; D(o application or Q(uit program

Select Microsoft Windows Applications - Version 2.0 and later by pressing the ENTER key. Then press D to proceed.

8. Next, you see this screen.

/ . ADOBETYPEFACE PACKAGE INSTALLATION: Installing For Microsoft Windows

In order to make the screen fonts available to MS Windows applications this program needs to update WIN.INI, your Windows configuration file. then copy the screen fonts to your Windows directory.

Enter Windows [drive:\directory]:

Press ENTER to accept input

Enter the directory displayed at step 5. After that, several messages are displayed and the following screen is the last. When you are installing Windows 2. xx, enter the directory as requested on the screen.

Installing Screen Fonts and Drivers 3-7

Windows

9. The next screen then appears:

ADOBE TYPEFACE PACKAGE INSTALLATION: Selecting Fonts

Select the fonts you want to use with your selected application (s).

_ AvantGrade-Book

(list of the selectable fonts)

'?lwill scroll through available fonts ENTER key will either select or deselect a font Select: D(o fonts, A(ll fonts, or Q(uit program

. /

Select the font you hope to install by pressing the ENTER key. After you have selected all of your required fonts, press D to install the fonts. Or press A to install all the fonts in this package.

10. After several messages, the following appears:

ADOBE TYPEFACE PACKAGE INSTALLATION

Your Typeface Package has been completely installed.

Select: I(nstal1 another package or Q(uit program

The installation is finished. Press Q to exit the install program.

3-8 Installing Screen Fonts and Drivers

Windows

Installation for Windows 2.x

Note: l You must install the following items before beginning the

screen font install program:

Windows PostScript printer driver (and select it as the default printer)

The install program automatically updates the Windows configuration file and copies the screen fonts and related files to the programs directory.

l Although Ventura Publisher font choices appear on the screen, you cannot install the Ventura fonts. They are not included in this utility program.

To fully use your printer in the Microsoft Windows 2.x environment, follow the steps below:

1.

2.

3.

4.

5.

6.

7.

Turn on your computer and start the Windows program.

Double click the CONTROL.EXE file name.

Click Add New Printer in the Installationmenu.

Insert the Windows setup disk containing the Apple Laserwriter or PostScript printer driver in Drive A:. Select the driver and click the Add button.

Confirm the directory for the printer driver and click the Yes button. (Normally you would choose the Windows directory.)

Click Printer in the Setup menu.

Click PostScript Printer on None in the Default Printer scroll box. Then, click OK.

Installing Screen Fonts and Drivers 3-9

Windows

8. Change the Paper Source, Paper Size, Orientation, or other items if necessary.

9. Click Connections in the Setup menu.

10. Select the port for your printer. If you select a port already being used by another printer, change the other printers port setting to none.

11. Click OK.

12. Close the Control Panel. The setting process is now complete.

Note: You cannot load paper from your printers optional paper tray when using Windows 2.x.

Running the screen-font installation program

Select the Windows version you plan to use with your typeface by following the steps below.

1. TMInsert the EPSON PostScript CARD Fonts (MS-DOSTM Format) Disk 1 in Drive A: If you are still in Windows, exit to DOS.

2. Type A: at the DOS prompt and press the ENTER key.

3. Type INSTALL and press the ENTER key again. Follow the instructions on the install programs screen. See steps 6 through 10 on pages 3-6 through 3-8.

3-10 Installing Screen Fonts and Drivers

Macintosh

The files for using your printer with your Macintosh computer are included in the disk labeled EPSON PostScriptTM Fonts (MacintoshTM Format) Disk 1.

The LaserWriter printer driver and LaserWrinter Prep convert the printout data to the PostScript format, and the screen font files allow you to see on the screen how fonts look when printed.

Driver installation

1. Open your computers hard disk that includes the System Folder.

2. Insert the EPSON PostScript Fonts (Macintosh Format) Disk 1 in the drive.

3. Copy the LaserWriter driver file and LaserWriter Prep file to the System Folder.

Important Note: If you are using System 7, use the LaserWriter driver supplied with System 7. (See your Macintosh System 7 users manuals for information under printer driver.) Do not use the driver provided in this package.

4. If you are using application software from Adobe Systems Inc., you may need to install the ????????.PPD file. Copy the ????????.PPD file to the folder specified by the application software. The PPD file for your printer is in the folder with your printers name. If there is no folder with your printers name, use the PPD file that appears in the disk window.

Installing Screen Fonts and Drivers 3-11

Macintosh

5. If you are using application software from Aldus Corporation, such as PageMaker@, you may need to install the ????????. apd file for your Macintosh computer. Copy the ????????.apd file to the folder specified by the application software. The apd file for your printer is in the folder with your printers name. If there is no folder with your printers name, use the apd file that appears in the disk window.

6. Eject the Fonts Disk 1.

Note: If you have two paper sources (such as the standard and optional lower paper cassette), use SelecType to select OPTION in the INPUT submenu. Then select Manual feed with your software when you want to use the standard tray and select Paper cassette when you want to use the optional tray.

Font installation

1. Insert the EPSON PostScript Fonts (Macintosh Format) Disk 1.

2. Double click on the Font/DA mover icon. The Font/DA mover lists the currently installed fonts in the current start up system file on the left of the screen.

3. Click the Open button on the right. The Font/DA mover lists the font files contained on the disk.

4. To install the fonts from the Fonts Disk 1, skip to step 7. To install fonts from the Fonts Disk 2, click the Eject button and go to the next step.

5. Insert the EPSON PostScript Fonts (Macintosh Format) Disk 2.

6. Click the Open button on the right. The Font/DA mover lists the font files contained on the disk.

3-12 Installing Screen Fonts and Drivers

Macintosh

7. Double click the font file you wish to copy. The Font/DA mover then lists the fonts contained in the font file you selected on the right.

8. Click the font you wish to copy. To select more than one font, hold down on the Shift key while you click the fonts.

9. Click < >. When you are installing fonts from Fonts Disk 1, copying begins. If you are installing fonts from Disk 2, follow the directions on your computer screen.

10. When copying is finished, click the Quit button to exit the Font/ DA mover.

11. Eject the disk.

Installing Screen Fonts and Drivers 3-13

Appendix A The Namer

When you have installed more than one PostScript printer with same name on an AppleTalk network, you can distinguish the printers by using a name that you assign using the Namer. Here are the steps to assign another name to your PostScript printer.

1. Select the LaserWriter printer driver using the menu of the system.

2. Insert the EPSON PostScriptTM CARD Fonts (MacintoshTM

Format) Disk 1 in your Macintosh.

3. Double click the Namer icon to run the Namer.

Note: If your Macintosh runs on System 7, use the Namer in the For System 7 User folder of Disk 1.

4. Choose the LaserWriter icon from the Select the type of device renames.

5. Select the printer name you want to change from the Available LaserWriters.

6. Type the name in the New name of LaserWriter box.

7. Click the Rename button.

8. Click the Quit button.

The Namer A-1

Appendix B Character Tables

SP

!

II

#

$

%

&

(

)

*

+

/

0

1

2

3

4

5

6

7

8

9

; < = > ?

Courier Zapf Dingbat Symbol

I s !

II x v

# F #

$ % 3

% %

& E &

I @

( + ;

1 E3 1 * t *

+ w +

I I ,

- @II -

. e2.b

/ B ;

0 69 0 1 c3 1 2 2 3

7 3

4 d 4 5 X 5 6 x 6 7 8 7 8 K 8 9 + 9 : + ; 9 .

< 0 ; = t = > % > ? t ?

Appendix B-1

Character Tables

Courier Zapf Dingbat Symbol

@

A

B

C

D

E

F

G

H

I

J

K

L

M

N

0

P

Q R

S

T

U

V

w

X

Y

Z

[

\

1 h

@ A B C D E F G H I J K L M N 0 P Q R S T U V w X Y z [ \ 1 A

-

x B X A E Q, r H I 6 K A M N 0 II 0 P Ii T Y 5 cl P F z 1 .. .

1 I -

B-2 Appendix

Character Tables

Courier Zapf Dingbat Symbol

a

b

C

d

e

f

g

h

i

j

k

1

m

n

0

P

q

r

S

t

u

V

w

X

Y

Z

(

1 2 7

I

a b C

d e f g h i j k 1 m n 0

P cl r S

t U

V

W

X

Y z

1

I

I

Appendix B-3

Character Tables

Courier Zapf Dingbat Symbol

1 6 0

1 6 1

1 6 2

163

164

1 6 5

1 6 6

1 6 7

1 6 8

169

1 7 0

171

112

173

174

1 7 5

1 7 6

177

1 7 8

179

180

181

182

183

184

1 8 5

1 8 6

167

168

189

1 9 0

191

I,

-

t *

.

I, >> .., %o

L J

B-4 Appendix

Character Tables

Courier Zapf Dingbat Symbol

1 9 2

1 9 3

194

1 9 5

1 9 6

1 9 7

1 9 8

1 9 9

2 0 0

2 0 1

2 0 2

2 0 3

2 0 4

2 0 5

2 0 6

2 0 7

2 0 6

2 0 9

2 1 0

2 1 1

2 1 2

2 1 3

2 1 4

2 1 5

2 1 6

2 1 7

2 1 8

2 1 9

2 2 0

2 2 1

2 2 2

2 2 3

Appendix B-5

Character Tables

Courier Zapf Dingbat Symbol

224

225

226

227

228

229

230

231

232

233

234

235

236

237

238

239

240

241

242

243

244

245

246

247

248

249

250

251

252

253

254

255

R

a

E 0 c?l P

;e

1

B-6 Appendix

Built in outline fonts

Following fonts are available:

0 Courier 1 Courier-Bold 2 Courier-Oblique 3 Courier-BoldOblique 4 Times-Roman 5 Times-Bold 6 Times-Italic 7 Times-BoldItalic 8 Helvetica 9 Helvetica-Bold

10 Helvetica-Oblique 11 Helvetica-BoldOblique 12 Symbol 13 AvantGarde-Book 14 AvantGarde-BookOblique 15 AvantGarde-Demi 16 AvantGarde-DemiOblique

17 Bookman-Demi 18 Bookman-DemiItalic 19 Bookman-Light 20 Bookman-LightItalic 21 Helvetica-Narrow 22 Helvetica-Narrow-Bold 23 Helvetica-Narrow-BoldOblique 24 Helvetica-Narrow-Oblique 25 NewCenturySchlbk-Roman 26 NewCenturySchlbk-Bold 27 NewCenturySchlbk-Italic 28 NewCenturySchlbk-BoldItalic 29 Palatino-Roman 30 Palatino-Bold 31 Palatino-Italic 32 Palatino-BoldItalic 33 ZapfChancery-MediumItalic

SelecType LEVEL1

EPSON

cn

m w cn 0 z

Manualsnet FAQs

If you want to find out how the C82605 Epson works, you can view and download the Epson C82605 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Epson C82605 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Epson C82605. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson C82605 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson C82605 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson C82605 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson C82605 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson C82605 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.