Contents

Epson PowerLite Home Cinema 3010 User's Guide PDF

1 of 88
1 of 88

Summary of Content for Epson PowerLite Home Cinema 3010 User's Guide PDF

PowerLite Home Cinema 3010/3010e Home Theater Projector

Users Guide

pl3010_3010e_UG.book Page 1 Wednesday, September 7, 2011 6:28 PM

2 Contents

Contents

Introduction 6

Projector Parts 7

Remote Control 9

Optional Accessories 10

Registration and Warranty 10

Using This Manual 11

Setting Up the Projector 12

Choose a Location 12

Installing the Projector 16

Connecting the Cables 18

Connecting Video and Computer Equipment 18

Making Other Connections 20

Installing Batteries in the Remote Control 21

Turning the Projector On and Off 21

Turning On the Projector 21

Turning Off the Projector 22

Selecting the Image Source 22

Positioning the Image 24

Making Basic Adjustments 26

Focusing and Zooming 26

Choosing the Aspect Ratio 27

Viewing 3D images 28

Projecting in Split Screen mode 29

Starting a Slideshow 30

Choosing Slideshow Options 31

Choosing the Color Mode 32

pl3010_3010e_UG.book Page 2 Wednesday, September 7, 2011 6:28 PM

Contents 3

Advanced Color Adjustments 33

Adjusting the Gamma Setting 33

Adjusting RGBCMY 35

Locking the Projector 36

Making Detailed Adjustments 37

Using the Menu System 37

Changing How the Menus Display 38

Adjusting the Picture Quality 39

Input Brightness Settings 39

Sharpness and Picture Quality Settings 41

Color Settings 43

3D Setup 45

Adjustments for Computer Images 46

WirelessHD Settings 47

Split Screen Setup 48

Selecting Memory Settings and Resetting the Projector 49

Creating Memory Settings 49

Selecting Memory Settings 50

Renaming Memory Settings 50

Deleting Saved Memory Settings 51

Resetting the Projector 51

Customizing Projector Features 52

Image Sizing 52

Screen Options 53

Other Setup Options 54

Using WirelessHD 56

Placing the WirelessHD Transmitter 56

Setting Up a WirelessHD Connection 57

Using HDMI Link 58

Setting Up HDMI Link 58

pl3010_3010e_UG.book Page 3 Wednesday, September 7, 2011 6:28 PM

4 Contents

Changing HDMI Link Settings 59

Maintenance 60

Cleaning the Lens 60

Cleaning the 3D Glasses 61

Cleaning the Projector Case 61

Cleaning and Replacing the Air Filter 62

Replacing the Lamp 64

Resetting the Lamp Usage Timer 67

Checking the Projector Status 67

Storing the Projector 68

Transporting the Projector 68

Problem Solving 69

What To Do When the Lights Come On or Flash 69

Solving Picture Problems 71

Solving Remote Control Problems 75

Solving WirelessHD Problems 75

Where to Get Help 77

Specifications 78

General 78

Lamp 78

Remote Control 79

WirelessHD Transmitter (Home Cinema 3010e only) 79

Dimensions 79

Electrical 80

Environmental 80

Safety 80

Compatible Video Formats 81

ESC/VP21 Command Codes 83

pl3010_3010e_UG.book Page 4 Wednesday, September 7, 2011 6:28 PM

Contents 5

Notices 84

Important Safety Information 84

FCC Compliance Statement 86

Copyright Notice 87

A Note Concerning Responsible Use of Copyrighted Materials 87

Trademarks 88

pl3010_3010e_UG.book Page 5 Wednesday, September 7, 2011 6:28 PM

6 Introduction

Introduction

The PowerLite Home Cinema 3010/3010e projector lets you enjoy theater-quality 3D images in the relaxing environment of your own home. Designed especially for home cinema use, it offers these outstanding features:

Native 1080p (1920 1080) resolution, dynamic contrast ratio up to 40,000:1 and up to 2200 lumens of brightness (white light output) for incredibly rich, sharp images in any room lighting

Auto Iris system that constantly controls the light output based on the gamma and black/white levels of your projected content, for perfectly adjusted images and deepest blacks

Epson C2Fine 3LCD technology for reliable picture quality, increased contrast ratio and uniform colors

1080Perfect video processing for more film-like images free of noise or artifacts

10-bit color quality for unmatched color accuracy, with over a billion colors available

HDMI (High-Definition Multimedia Interface) ports for superior, uncompressed digital video

True 16:9 wide-format projection

Powerful 10 W per channel stereo speaker system

Flexible setup configurations, including front projection and ceiling mounted, with horizontal keystone slider for offset placement

pl3010_3010e_UG.book Page 6 Wednesday, September 7, 2011 6:28 PM

Introduction 7

Projector Parts

Control panel

Air exhaust

Lens cover Adjustable foot

HDMI ports

External 3D IR port

Remote receiver

Horizontal keystone slider

Zoom ring

Front

Back

Lamp cover

Cable clip hole

Air intake

Air filter cover

Focus ring

Speakers

Power inlet

Cable clip hole

Kensington lock port

Audio (L-R) port

Component port

RS-232C port

USB port

Remote receiver

Video port

PC port

pl3010_3010e_UG.book Page 7 Wednesday, September 7, 2011 6:28 PM

8 Introduction

Brightness sensor

Escape button

Power button

Mounting bracket attachment points

Bottom

Projector Control Panel

Front adjustable feet

Power light

Source button

Volume/horizontal keystone buttons

Vertical keystone buttons

Lamp light

Temperature light

pl3010_3010e_UG.book Page 8 Wednesday, September 7, 2011 6:28 PM

Introduction 9

Remote Control

Source buttons Switch between equipment connected to the projector

On button Turns projector on

Menu navigation buttons

Split button Toggles the Split Screen function on or off

Color Mode button Quickly change color settings to match room lighting

Aspect button Changes the pictures aspect ratio

A/V Mute button Temporarily stops projection or hides the menu screen

Auto Iris button Toggles the Auto Iris function on or off

HDMI Link button Enables and disables the HDMI link function

User button Function can be set by the user from the Settings menu

Illumination button Lights the remote control buttons for easy viewing

Menu button Displays the projectors menus

Default button Resets menu selection to default values

2D/3D button Toggles between 2D and 3D projection

RGBCMY button Displays the color adjustment menu

Pattern button Displays test patterns to adjust the image

HDMI Link control buttons Control playback of a linked video device

Memory button Accesses the Memory menu

Standby button Turns projector off

pl3010_3010e_UG.book Page 9 Wednesday, September 7, 2011 6:28 PM

10 Introduction

Optional Accessories

Epson provides the following optional accessories for the projector:

In addition to the accessories listed above, 1-year and 2-year extended service plans are available. You can purchase these plans and other accessories from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Registration and Warranty

Your projector comes with a basic two-year carry-in warranty. For details, see the Quick Setup sheet.

In addition, Epson offers free Extra CareSM Home Service. In the unlikely event of an equipment failure, you wont have to wait for your unit to be repaired. Instead, Epson will ship you a replacement unit anywhere in the United States, Canada, or Puerto Rico. See your Extra Care Home Service brochure for details.

To register, simply follow the registration instructions on the CD, or register online at epson.com/webreg. Registering also lets you receive special updates on new accessories, products, and service.

Product Part number

Replacement lamp V12H010L68

Air filter replacement V13H134A38

Kensington security lock (anti-theft device) ELPSL01

Projector mount V12H003B20

Computer cable (6 feet [1.8 meters]) V12H005C02

3D active shutter glasses V12H483001

External 3D IR emitter V12H484001

pl3010_3010e_UG.book Page 10 Wednesday, September 7, 2011 6:28 PM

Introduction 11

Using This Manual

This book contains all the information you need to use the projector, in addition to basic setup and maintenance instructions, troubleshooting tips, important safety instructions, specifications, and warranty information.

Please follow these guidelines as you read through the manual:

Warning: Must be followed carefully to avoid bodily injury.

Caution: Must be observed to avoid damage to your equipment.

Note: Contains important information about your projector.

Tip: Contains helpful projection tips.

Need additional help? Take advantage of Epsons automated support services 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Use this site to view FAQs or product information and e-mail Epson.

If you need more help, you can use the Epson PrivateLine Support service. Call (800) 637-7661 and enter the PIN on the PrivateLine support card that came with your projector.

pl3010_3010e_UG.book Page 11 Wednesday, September 7, 2011 6:28 PM

12 Setting Up the Projector

Setting Up the Projector

Follow the instructions in this section to choose a location for the projector, connect the cables, and display an image.

Choose a Location

You can install the projector for the viewing setups shown below, as well as rear projection.

Center

Ceiling

Side

pl3010_3010e_UG.book Page 12 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 13

Keep the projector level and place it at a height where its lens is centered between the top and bottom of the screen. If this isnt possible, use the horizontal keystone slider and vertical keystone buttons to adjust the image (see page 24).

Note: Image quality may be reduced if excessive keystone correction is used.

The size of the image is determined by the distance from the projectors lens to the screen. Depending on your display settings and how you use the zoom ring, the actual size may differ. Use these tables as a guide for projector placement:

16:9 aspect ratio

Projection distance

Diagonal image size

(width height) Offset

3.8 to 6.2 feet 116 to 190 cm

40 in. (35 20 in.) 101.6 cm (89 50 cm)

0 in. (0 cm)

5.8 to 9.4 feet 176 to 287 cm

60 in. (51 30 in.) 152.4 cm (130 75 cm)

0 in. (0 cm)

7.7 to 12.6 feet 235 to 383 cm

80 in. (71 39 in.) 203.2 cm (180 100 cm)

0 in. (0 cm)

9.7 to 15.7 feet 295 to 480 cm

100 in. (87 47 in.) 254 cm (220 120 cm)

0 in. (0 cm)

11.6 to 18.9 feet 354 to 576 cm

120 in. (106 59 in.) 304.9 cm (270 150 cm)

0 in. (0 cm)

14.6 to 23.7 feet 444 to 721 cm

150 in. (130 75 in.) 361 cm (330 190 cm)

0.3 in. (1 cm)

17.5 to 28.4 feet 533 to 866 cm

180 in. (173 98 in.) 457 cm (440 250 cm)

0.3 in. (1 cm)

Projection distance Offset Offset refers to distance from bottom of image to center of lens.

Diagonal image size

pl3010_3010e_UG.book Page 13 Wednesday, September 7, 2011 6:28 PM

14 Setting Up the Projector

To determine the exact image size when you know the projection distance (or the exact projection distance when you know the desired image size), you can use the Image Size Calculator. This program is available on the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

Also keep these considerations in mind:

Make sure there is plenty of space for ventilation around and under the projector. Do not set the projector on top of loose materials that could block the vents underneath.

Make sure the projector is within 9.8 feet (3 m) of a grounded electrical outlet or extension cord.

4:3 aspect ratio

Projection distance

Diagonal image size

(width height) Offset

4.7 to 7.6 feet 143 to 233 cm

40 in. (32 24 in.) 101.6 cm (81 61 cm)

0 in. (0 cm)

7.1 to 11.5 feet 216 to 352 cm

60 in. (47 35 in.) 152.4 cm (120 90 cm)

0 in. (0 cm)

9.5 to 15.4 feet 289 to 470 cm

80 in. (63 47 in.) 203.2 cm (160 120 cm)

0 in. (0 cm)

11.8 to 19.3 feet 361 to 588 cm

100 in. (79 59 in.) 254 cm (200 150 cm)

0 in. (0 cm)

14.2 to 23.2 feet 434 to 706 cm

120 in. (94 71 in.) 304.8 cm (240 180 cm)

0.3 in. (1 cm)

17.8 to 29 feet 544 to 883 cm

150 in. (118 91 in.) 381 cm (300 230 cm)

0.3 in. (1 cm)

23.8 to 38.7 feet 726 to 1179 cm

200 in. (161 118 in.) 508 cm (410 300 cm)

0.3 in. (1 cm)

pl3010_3010e_UG.book Page 14 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 15

In order to view 3D images correctly, 3D glasses must be worn within proper range of the projector. Use the image below to determine the ideal distance for 3D projection (the shading represents the 3D viewing area):

Use the optional external 3D emitter if you cannot view the 3D image normally or if the projector is located more than 16.5 feet (5 m) from the viewing area. See Optional Accessories on page 10 for ordering information.

60 16.5 ft (5 m)

13 ft (4 m)

pl3010_3010e_UG.book Page 15 Wednesday, September 7, 2011 6:28 PM

16 Setting Up the Projector

Installing the Projector

To install the projector, you first need to determine the location, based on the size of your screen (maximum diagonal image size). Use the tables on page 13 as a guide to positioning the projector.

To suspend the projector from a ceiling, you will need the optional projector mount designed for the projector. See page 10 for ordering information. Follow the instructions included with the mount to install the projector.

Warning: When installing or adjusting the ceiling mount, do not use adhesives to prevent the screws from loosening and do not use any type of oil or lubricant. These may cause the projector casing to crack and the projector may fall, causing serious injury and serious damage to the projector.

If you install the projector on the ceiling, you will need to invert the picture so that it appears right side up. Follow these steps:

1. Press the Menu button on the remote control.

2. Open the Settings menu, then select Projection.

3. Select Front/Ceiling.

4. Press the Menu button to exit the menu system.

pl3010_3010e_UG.book Page 16 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 17

The following illustrations show the dimensions of the projector:

Center of lens

3.2 in. (80 mm)

5.5 in. (139.6 mm)

8.3 in. (210 mm)

16.5 in. (420 mm)

11.8 in. (300 mm)

2.4 in. (60 mm) 5.9 in. (150 mm)

2.8 in. (70 mm)

14.4 in. (365 mm)

6.3 in. (160 mm)

pl3010_3010e_UG.book Page 17 Wednesday, September 7, 2011 6:28 PM

18 Setting Up the Projector

Connecting the Cables

Connecting Video and Computer Equipment

You can connect the projector to many types of video equipment, such as a Blu-ray Disc/DVD player, digital tuner, cable or satellite box, video game console, camcorder, or digital camera. You can also connect it to a desktop or laptop PC or Apple Mac system. For details on compatible video formats, see page 81.

You can connect up to six pieces of equipment at the same time, using any of the commercially available cables shown below:

Note: See page 57 for information on connecting with WirelessHD (PowerLite Home Cinema 3010e only).

Port name Video equipment connection Computer connection

HDMI 1/ HDMI 2

Use an HDMI cable:

Component Use a component video cable (with RCA-style connectors):

Connect the cable to the three component video ports. Match corresponding colors between the cable and the ports. For audio, use a stereo RCA audio cable:

pl3010_3010e_UG.book Page 18 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 19

For best results, connect your video equipment to the HDMI port, if possible. If your equipment doesnt support HDMI, connect it to either the Component (for high quality, component video) or Video (for composite video) port.

When you connect an HDMI cable to the projector, it is recommended that you fasten it with the included cable clip. Follow these steps to install the cable clip:

1. Connect the HDMI cable to one of the HDMI ports on the projector.

2. Insert the end of the cable clip anchor into the cable clip hole near the HDMI port, as show below.

3. Place the open cable clip around the HDMI cable, but dont lock it into place.

4. Slide the cable clip towards the projector and lock the clip onto the HDMI connector.

To remove the cable clip, unlock the clip and disconnect the HDMI cable. Then pinch the side of the cable clip anchor and carefully pull it out of the cable clip hole.

PC Use a Mini D-sub, 15-pin monitor cable to connect to a computer RGB (monitor) port:

For audio, use a stereo RCA to mini-jack stereo (3.5 mm) audio cable:

Video Use an RCA video and audio cable:

Port name Video equipment connection Computer connection

pl3010_3010e_UG.book Page 19 Wednesday, September 7, 2011 6:28 PM

20 Setting Up the Projector

Making Other Connections

Connect the power cable and other cables described below, depending on how you plan to use the projector.

Plug the power cable into the projector and a grounded electrical outlet.

To use an AV controller with the projector, connect a 9-pin null modem serial cable to the RS-232C port.

To connect to a digital camera, flash drive, or storage device, connect the USB cable that came with your device to both your device and to the projectors USB port. For information on using the projectors Slideshow feature, see page 30.

pl3010_3010e_UG.book Page 20 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 21

Installing Batteries in the Remote Control

The remote control uses two AA batteries.

Warning: Keep batteries away from children. If a battery is swallowed, contact your doctor immediately.

1. Release the tab and lift open the cover.

2. Insert two new AA batteries as shown.

3. Insert the tab on the cover and press it down until it clicks into place.

Aim the remote control at the screen, or at the front or back of the projector. Make sure you are within 32 feet (10 meters) of the projector.

If you suspect the batteries are weak, press the illumination button. If the buttons do not glow, replace the batteries.

Turning the Projector On and Off

Turning On the Projector

1. Remove the lens cap.

2. Turn on any connected equipment you plan to use.

3. Press the On button on the remote control or the Ppower button on the projector.

Remote control Projector

pl3010_3010e_UG.book Page 21 Wednesday, September 7, 2011 6:28 PM

22 Setting Up the Projector

Note: To prevent children from turning on the projector, you can use the Child Lock feature. See page 36 for details.

If youll be using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can properly cool the projector at the high altitude air pressure. See page 55 for details.

The power light flashes while the projector warms up. If you dont see a picture, you may need to change the image source as described on page 22.

Turning Off the Projector

1. Turn off any equipment connected to the projector.

2. Press the Ppower button on the projector twice or press the Standby button on the remote control and wait for the light to stop flashing.

Caution: Turn off this product when not in use to prolong the life of the projector.

Selecting the Image Source

The source buttons on the projector and remote control let you switch between images from different pieces of equipment connected to the projector (such as a Blu-ray Disc/DVD player, cable or satellite box, or video game console).

Press the Source button on the remote control that corresponds to the port to which your video source is connected.

pl3010_3010e_UG.book Page 22 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 23

If you press the Source button on the projector, you see a list of available sources. Press the Source button to move through the list and select the desired source.

Note: If an image does not appear, see Problem Solving on page 69.

To temporarily turn off the image and darken the screen, press the A/V Mute button on the remote control. Press the A/V Mute button again to return to normal viewing.

pl3010_3010e_UG.book Page 23 Wednesday, September 7, 2011 6:28 PM

24 Setting Up the Projector

Positioning the Image

If the projector is not centered in front of the screen, use the horizontal keystone slider, horizontal keystone buttons, volume buttons on the projector, and vertical keystone buttons to correct the shape of the image.

Note: You can display a test pattern to help adjust the image position by pressing the Pattern button on the remote control. Press the Esc button to turn off the test pattern.

The image can be adjusted up to 30 in either direction with the horizontal keystone slider or buttons:

Horizontal keystone slider

pl3010_3010e_UG.book Page 24 Wednesday, September 7, 2011 6:28 PM

Setting Up the Projector 25

If one side of the image is taller than the other, make sure the projector is parallel to the screen. If necessary, adjust the front feet so that the projector is horizontal.

Your projector automatically adjusts images that are wider at the top or bottom, but if necessary, you can also use the vertical keystone buttons on the projector to correct this.

In addition to the horizontal keystone slider, you can use the volume buttons on the projector to adjust images that are wider on the left or right side.

Note: Press either of the vertical keystone buttons to open the H/VKeystone menu before pressing the volume buttons. The volume buttons wont adjust the H-Keystone setting unless this menu is active.

Adjustable feet

pl3010_3010e_UG.book Page 25 Wednesday, September 7, 2011 6:28 PM

26 Making Basic Adjustments

Making Basic Adjustments

Follow the instructions in this chapter to make basic adjustments to the image shape, size, color, and quality. For further refinements, see Making Detailed Adjustments on page 37.

Focusing and Zooming

Use the focus ring to sharpen the image.

Use the zoom ring to reduce or enlarge the image.

Zoom ring

Focus ring

pl3010_3010e_UG.book Page 26 Wednesday, September 7, 2011 6:28 PM

Making Basic Adjustments 27

Choosing the Aspect Ratio

In many cases, video signals are automatically resized to fit on your screen when Auto is selected as the Aspect setting. You may need to change the size of the image (or aspect ratio) for certain image types by pressing the Aspect button on the remote control.

Select one of these settings:

Normal for standard TV broadcasts, computer images, or images with a 4:3 aspect ratio.

Full for images recorded in 16:9 (wide-screen) format and squeeze mode.

Zoom for letterbox images.

Wide for expanding a 4:3 image to 16:9 so it fills the whole screen. This stretches only the right and left sides of the image; the central part is unchanged.

Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port, the aspect ratio is automatically selected and you cannot change it.

If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image. For details, see page 53.

For details on how the projector resizes the picture when you choose an Aspect setting, see page 81.

4:3 image using Normal setting 16:9 image using Full setting

pl3010_3010e_UG.book Page 27 Wednesday, September 7, 2011 6:28 PM

28 Making Basic Adjustments

Viewing 3D images

To view 3D content, you must first connect a 3D-compatible video device to one of the HDMI ports on your projector. You will also need a pair of Epson or Epson-compatible M-3Di active shutter glasses.

1. Turn on and begin playback on the 3D-compatible video device.

2. Press the 2D/3D button on the remote control, if necessary.

3. Press and hold the power button on your 3D glasses for at least one second.

See Solving Picture Problems on page 71 for 3D troubleshooting tips.

pl3010_3010e_UG.book Page 28 Wednesday, September 7, 2011 6:28 PM

Making Basic Adjustments 29

Projecting in Split Screen mode

You can use the Split Screen feature to simultaneously project two images from different image sources next to each other. You can control the Split Screen feature using the remote control or the projector menus.

Note: While you use the Split Screen feature, other projector features may not be available and some settings may be automatically applied to both images. You also cant access Split Screen mode when USB is the active display source or 3D mode is enabled.

1. Press the Split button on the remote control.

The currently selected input source moves to the left side of the screen.

2. Press the Menu button. You see this screen:

To select an input source for the other image, select the Source setting, press Enter, select the input source, select Execute, and press Enter. (You can also change image sources, if necessary.)

Note: You cant access Split Screen mode when USB is the active display source.

3. To switch the images, select the Swap Screens setting and press Enter.

4. To change the image sizes, select the Screen Size setting, press Enter, select a sizing option, press Enter, and press Menu to exit.

pl3010_3010e_UG.book Page 29 Wednesday, September 7, 2011 6:28 PM

30 Making Basic Adjustments

Note: Depending on the video input signals, the images may not appear at the same size even if you choose the Equal setting.

5. To choose the audio you want to hear, select the Audio Source setting, press Enter, select an audio option, press Enter, and press Menu to exit.

Note: Select Auto to hear audio from the largest screen or the left screen.

6. To exit the Split Screen feature, press the Split or Esc button.

Starting a Slideshow

After connecting a USB device to the projector, you can switch to the USB input source and start your slide show.

Note: You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter. See Choosing Slideshow Options on page 31 for more information.

1. Press the USB source button on the projector remote control. The Slideshow screen appears.

2. Do the following as necessary to locate your files:

If you need to display files inside a subfolder on your device, press the arrow buttons to highlight the folder and press the Enter button.

To move back up a folder level on your device, highlight Back to Top and press Enter.

To view additional images in a folder, highlight Next page or Previous page and press Enter.

pl3010_3010e_UG.book Page 30 Wednesday, September 7, 2011 6:28 PM

Making Basic Adjustments 31

3. Do one of the following to start your slide show:

To display an individual image, press the arrow buttons to highlight the image and press Enter. (Press the Esc button to return to the file list screen.)

To display a slide show of all the images in a folder, press the arrow buttons to highlight the Slideshow option at the bottom of the screen and press Enter.

Note: If any file names are longer than 8 characters or include unsupported symbols, the file names may be shortened or changed only in the screen display.

4. While projecting, use the following commands to control the display as necessary:

To rotate a displayed image, press the up or down arrow button.

To move to the next or previous image, press the left or right arrow button.

5. To stop the display, follow the on-screen instructions or press the Esc button.

Choosing Slideshow Options

You can select these display options when using the projectors Slideshow feature by highlighting Option at the bottom of the Slideshow screen and pressing Enter. You see this screen:

Setting Options Description

Display Order Name Order Displays files in name order

Date Order Displays files in date order

pl3010_3010e_UG.book Page 31 Wednesday, September 7, 2011 6:28 PM

32 Making Basic Adjustments

Choosing the Color Mode

You can change the Color Mode to automatically adjust brightness, contrast, and color, letting you quickly optimize the projected image for various lighting environments. You can also select a different color mode for each input sourcewhich is useful if you view different types of images from different sources. (For example, you might set the HDMI 1 source to Living Room if its usually used for watching movies in the daytime with the blinds closed, and the PC source to Dynamic for playing video games with the blinds open.)

Select the image source you want to adjust, then press the Color Mode button on the remote control. Choose from these settings:

Auto for automatically-optimized color settings based on the current lighting environment.

Note: Selecting the Rear or Ceiling projection settings will disable the Auto Color Mode.

Cinema for viewing movies in a dimly lit room.

Dynamic for projecting the brightest picture available.

Sort Order In Ascending Sorts files in first-to-last order

In Descending Sorts files in last-to-first order

Continuous Play On Displays a slide show continuously

Off Displays a slide show one time through

Screen Switching Time No Does not display the next file automatically

1 Second to 60 Seconds Displays files for the selected time and switches to the next file automatically

Effect Wipe Transitions between images with a wipe effect

Dissolve Transitions between images with a dissolve effect

Random Transitions between images using a random variety of effects

Setting Options Description

pl3010_3010e_UG.book Page 32 Wednesday, September 7, 2011 6:28 PM

Making Basic Adjustments 33

Living Room for watching television programs during the day.

Natural for projecting natural, accurate colors in a dimly lit room.

3D Dynamic for projecting the brightest 3D picture available (only available when the projector is in 3D Mode).

3D Cinema for viewing 3D movies in a dimly lit room (only available when the projector is in 3D Mode).

Advanced Color Adjustments

To further customize the color and image quality, you can adjust the gamma and individual RGBCMY color tones using the RGBCMY button on the remote control (not available when Auto is selected as the Color Mode).

Note: You can fine-tune these and other color and image quality settings using the projectors menu system (see page 37). You can also save combinations of picture settings with the Memory feature for easy recall (see page 49). If you dont like the settings you have selected on a particular menu screen, you can press the Default button to restore the factory settings.

Adjusting the Gamma Setting

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. Gamma presets make minor adjustments to mid-tone values. The larger the gamma preset, the lower the midtone values. Changing these settings affects contrast which can be seen as a blur in bright areas.

pl3010_3010e_UG.book Page 33 Wednesday, September 7, 2011 6:28 PM

34 Making Basic Adjustments

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

1. Press the Menu button. Select Image from the main menu. Select Advanced and then Gamma. You see the following displayed on the screen:

2. Do one of the following:

Select one of the numeric correction values using the u or d button on the remote control and press the Enter button. You see the setting reflected in the graph on the right. The horizontal axis represents the input signal level, and the vertical axis represents the output signal level. Press the Esc button to exit.

Select Customized. Then continue with the next step.

3. Do one of the following:

Select Adjust it from the image. You see a gamma icon on the projected image. Use the arrow buttons to move the icon to the area of brightness you want to adjust, then press Enter. The custom gamma graph appears with the channel selected for adjustment. Press the u or d button to adjust and then press Enter to save your setting and exit.

Select Adjust it from the graph. When the gamma graph appears, use the l or r

button to select the point on the graph that you want to adjust, and then use the u or d button to adjust the settings. Press Enter to save your setting and exit.

4. Press the Menu button to close the menu screen when youre done.

pl3010_3010e_UG.book Page 34 Wednesday, September 7, 2011 6:28 PM

Making Basic Adjustments 35

Adjusting RGBCMY

Use this feature to adjust the hue, saturation, and brightness for each of the red (R), green (G), blue (B), cyan (C), magenta (M), and yellow (Y) color components (not available when Auto is selected as the Color Mode).

1. Press the RBGCMY button. You see the following displayed on the screen:

2. Use the u or d button on the remote control to select the color you want to adjust, and press the Enter button.

3. Select the Hue, Saturation, or Brightness for that color, and use the l or r button to make the adjustment.

4. Press Esc to adjust another color, or press RGBCMY to exit.

Note: You can also adjust the offset and gain using the RGB setting in the projectors menu system (see page 44).

pl3010_3010e_UG.book Page 35 Wednesday, September 7, 2011 6:28 PM

36 Making Basic Adjustments

Locking the Projector

The projector includes two lock settings to prevent the image from being accidentally changed once its adjusted, and to keep children from turning on the projector without adult supervision.

To access the lock settings, follow these steps:

1. Press the Menu button on the remote control.

2. Select Settings and press the OK button.

3. Select Lock Setting and press the OK button.

4. Choose from these options:

Child Lock to disable the Ppower button on the projectors control panel unless it is pressed for about 3 seconds. Since you can still use the remote control to turn on the projector, you may want to keep it away from childrens reach.

Control Panel Lock to disable all the buttons on the projectors control panel except the Ppower button. A lock icon appears on the screen whenever you press a button with Control Panel Lock turned on. To operate the projector, you must use the remote control. To cancel Control Panel Lock, press and hold the Enter button on the projectors control panel for at least 7 seconds.

5. Press Menu to exit the menu system.

If you turned on the Control Panel Lock, the projector buttons are now locked.

If you turned on the Child Lock, turn off the projector and let it cool down. The Child Lock takes effect after the cool-down period.

pl3010_3010e_UG.book Page 36 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 37

Making Detailed Adjustments

You can use the projectors on-screen menus to make detailed adjustments to the image qualitysuch as the brightness, contrast, sharpness, and color. You can also change the menu display, sleep mode settings, and other projector features.

Using the Menu System

You can access the menu system either from the remote control or the buttons on the projectors control panel. You can access the full menu or a line menu that lets you change selected settings. You can also change the menu language and control how the menus display (see page 38).

To display the full menu, press the Menu button on the projector or remote control. You see a display like this one:

Note: You may see different options, depending on your projector model and how your equipment is connected to it.

1. Press the u or d button to highlight a main menu option (Image, Signal, Extended, Settings, Memory, Info or Reset), then press the Enter button to select it.

2. Press the u or d button to highlight a setting, then press the Enter button.

3. Press the u, d, l, or r button to change settings as necessary. You may have to press the Enter button to confirm your choice.

Main menu options

Settings available for the highlighted menu

pl3010_3010e_UG.book Page 37 Wednesday, September 7, 2011 6:28 PM

38 Making Detailed Adjustments

4. When youre finished, press the Esc button to return to the previous menu or press the Menu button to exit the menu system.

To display one of the line menus, press the Enter button. You see a display like this at the bottom of the image:

Press the l or r button to adjust the setting.

Press the Menu or Esc button to close the line menu when youre done.

Note: When a line menu is displayed, you can press Default on the remote control to reset the menu to its factory setting.

Changing How the Menus Display

Use these options to control how the menus display.

Language

Select from 21 languages to use in the menu system.

Menu Position

Use the arrow buttons to choose a position on the screen for displaying the menu.

Menu Color

Select a color scheme for displaying the menus.

Extended > Language

Extended > Display > Menu Position

Extended > Display > Menu Color

pl3010_3010e_UG.book Page 38 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 39

Adjusting the Picture Quality

Before fine-tuning the image using these adjustments, make sure you have already selected the best Color Mode for your picture and viewing environment, as described on page 32. Then use the settings in this section to finish adjusting the picture to your liking.

Most image quality settings are saved independently for each input source (Video, HDMI, Component, PC) and color mode. After you finish adjusting the settings for one input source, switch to the other input sources youll be using and make any necessary adjustments.

Note: These features are not available when Auto is selected as the Color Mode.

Input Brightness Settings

If the signal from connected equipment is weak and images appear dark, you can adjust the Brightness and Contrast settings. You can adjust brightness and contrast for each image source and color mode.

The Brightness setting controls how much light is produced by the projector, and the Contrast setting adjusts the difference between the bright and dark areas of the projected image. The other settings in this section control how the projector interprets the light and dark areas of the picture.

Brightness

Adjust the brightness so its suitable for your viewing conditions. For example, if youre projecting in a brightly lit room or onto an especially large screen, you may need to increase the brightness. Decrease the brightness for dark rooms or small screens; this also reduces power consumption and fan noise, and helps to prolong the life of the lamp.

Contrast

This setting adjusts the difference between bright and dark areas.

Image > Brightness

Image > Contrast

pl3010_3010e_UG.book Page 39 Wednesday, September 7, 2011 6:28 PM

40 Making Detailed Adjustments

Auto Iris

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

When this setting is on, the light output is automatically adjusted according to the brightness of the image. Select either Normal or High Speed to indicate how quickly you would like the projector to respond to changes in the brightness of the image. The setting is stored separately for each image source and color mode.

Setup Level

Note: This setting can be used only when an NTSC signal is being input through the Video port, or when a video signal is being input through the Component video ports.

This setting adjusts the threshold at which dark areas of the image are rendered black (0 IRE). For compatibility with most DVD and video equipment sold in the United States, leave this setting at 0%. Check your video equipments specifications to be sure of the correct setting.

EPSON Super White

Note: This setting can be used only when the signal is input through the HDMI 1 or HDMI 2 ports with the Color Mode set to Natural or Cinema (see page 32).

If bright parts of the image are washed out or overexposed (when the input signal contains values over 100 IRE), turn this setting on to compensate.

HDMI Video Range

Note: This setting can be used only when HDMI 1 or HDMI 2 is selected as the image source (see page 22). This setting cannot be used when the Color Mode is set to Auto (see page 32) or Epson Super White is set to On.

If your video equipment has an HDMI port and youve connected it to the projector using an HDMI cable, set the level of the projector to match that of the video equipment.

Power Consumption

This setting controls the light output from the projector. On Normal, the projector produces a brighter image and the lamp uses more power. To save power and extend the life of the lamp, select ECO.

Image > Auto Iris

Signal > Advanced > Setup Level

Signal > Advanced > EPSON Super White

Signal > Advanced > HDMI Video Range

Image > Power Consumption

pl3010_3010e_UG.book Page 40 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 41

Sharpness and Picture Quality Settings

If the image looks fuzzy, or if it contains noise or flickering, you can use these settings to correct it.

Sharpness

Use this function to make lines and edges appear more distinct in the image. This setting is stored separately for each image source and color mode setting. You can select Standard to adjust the sharpness of the entire image, or select Advanced to access the following submenu:

Note: The Advanced setting cannot be used with a signal input through the PC port.

Choose Thin-Line Enhancement to sharpen details such as hair and clothing. Choose Thick-Line Enhancement to sharpen large contours and backgrounds. Choose Vert. Line Enhancement to increase vertical image sharpness. Choose Horiz. Line Enhancement to increase horizontal image sharpness.

Image > Sharpness

pl3010_3010e_UG.book Page 41 Wednesday, September 7, 2011 6:28 PM

42 Making Detailed Adjustments

Progressive

Converts interlaced to progressive signals. The projector uses 3D DigiScan HD Circuitry Processing for video-sourced images.

Leave the setting on Film/Auto for viewing movies on a player that produces interlaced output. Select Video for watching videos captured with a video camera. Set to Off when viewing images with a large amount of movement.

Note: This setting can be used only when viewing a composite video signal, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 81).

Motion Detection

This setting specifies how signals are converted to progressive signals. Select a lower setting for slow-moving or still images (S) or select a higher number for video images (M).

Note: This setting can be used only when viewing a composite video signal, or 480i or 576i, or 1080i signals input through the Component, HDMI 1, or HDMI 2 ports (see page 81).

Noise Reduction

Note: This setting may not be available when the Color Mode is set to Auto (see page 32) or with a signal input through the PC port.

This setting reduces flickering of analog images. You can select from 3 levels of noise reduction.

2-2 Pull-down

Note: This setting can be used only when viewing a 1080p/24Hz signal input through the Component, HDMI 1, or HDMI 2 ports (see page 81). This setting cannot be used when the Color Mode is set to Auto (see page 32) or with a signal input through the PC port.

This setting allows you to select whether images are projected with 2-2 Pull-down detection or 2-3 Pull-down detection. Select On for 2-2 Pull-down detection.

Signal > Progressive

Signal > Motion Detection

Signal > Advanced > Noise Reduction

Signal > Advanced > 2-2 Pull-down

pl3010_3010e_UG.book Page 42 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 43

Color Settings

If the image colors dont look correct, you can adjust them using these settings. Use the first three settings described below to make the most visible changes. If you only need to make slight adjustments, you can fine-tune the picture with the remaining settings. Most color settings are stored separately for each image source and color mode.

Color Saturation

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32) or with a signal input through the PC port.

Adjusts the color intensity of the image.

Tint

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32) or with a signal input through the PC port.

Shifts the color balance between magenta and green.

Abs. Color Temp.

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

Shifts the color balance between red and blue, making the image appear warmer or cooler.

Skin Tone

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

Makes fine adjustments to the tint and controls the amount of magenta or green in the image. Also useful for correcting black-and-white images, if they look tinted.

Image > Color Saturation

Image > Tint

Image > Abs. Color Temp.

Image > Skin Tone

pl3010_3010e_UG.book Page 43 Wednesday, September 7, 2011 6:28 PM

44 Making Detailed Adjustments

RGB

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

Use the RGB settings to fine-tune the color of the image. You can adjust the offset and gain for each signal color (red, green, and blue). Use Offset to adjust darker shades and Gain for the lightest shades.

RGBCMY

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

Use the RGBCMY settings to adjust the hue, saturation, and brightness of the six color components (red, green, blue, cyan, magenta, yellow). After adjusting each color, press Esc to move to another menu option. You can also access this setting by pressing the RGBCMY button on the remote control. See page 35 for more information.

Gamma

Note: This setting cannot be used when the Color Mode is set to Auto (see page 32).

You can select from five gamma settings (2.0 to 2.4) or customize your own setting from your image or a displayed graph. Lower values will increase the contrast of dark areas, but tend to blur the bright areas. Higher values will darken the light areas. See page 33 for more information.

Image > Advanced > RGB

Image > Advanced > RGBCMY

Image > Advanced > Gamma

pl3010_3010e_UG.book Page 44 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 45

3D Setup

Use this menu to adjust 3D brightness, the 3D display format and other 3D settings.

Note: You should only adjust the 3D Format and Inverse 3D Glasses settings if 3D images arent displaying correctly. Changing these settings unnecessarily may cause problems with 3D projection.

3D Display

Enables or disables 3D mode. You can also change this setting by pressing the 2D/3D button on the remote control.

3D Format

Use this setting to select the 3D format supported by your video device. In most cases, the projector will correctly detect the 3D format when this option is set to Auto. You should only select the 2D, Side by Side, or Top and Bottom formats when your projector doesnt properly display 3D images. See your video source documentation for information on which mode to select.

3D Brightness

Adjusts the brightness of 3D images. Select the Medium or High settings if the 3D display is too dark.

Note: This setting is not available when 3D Format is set to Auto.

Inverse 3D Glasses

Reverses the timing for the left and right shutters on the 3D active shutter glasses. Only enable this function if 3D images are not displaying correctly.

Note: This setting is not available when 3D Format is set to Auto.

3D IR Emitter

Select External if youve connected an external 3D IR emitter (see Optional Accessories on page 10 for ordering information).

Signal > 3D Setup > 3D Display

Signal > 3D Setup > 3D Format

Signal > 3D Setup > 3D Brightness

Signal > 3D Setup > Inverse 3D Glasses

Signal > 3D Setup > 3D IR Emitter

pl3010_3010e_UG.book Page 45 Wednesday, September 7, 2011 6:28 PM

46 Making Detailed Adjustments

3D Viewing Notice

Enables or disables the viewing notice that is displayed when 3D mode is activated.

Adjustments for Computer Images

In addition to the settings described previously, you can adjust the Tracking and Sync settings for analog RGB computer images. Normally, these settings are adjusted automatically by the projector. If you notice that the image is blurry or contains dark vertical bands, you may need to adjust the settings yourself.

Auto Setup

Leave this setting on so that the projector automatically adjusts the tracking, sync, and position of the image.

Tracking

Adjust the tracking to eliminate vertical bands. It is easiest to adjust the tracking when the image contains a lot of fine detail (such as black text on a white background).

Sync.

Adjust the synchronization to eliminate blurriness. For best results, make sure the tracking is properly adjusted first.

Signal > 3D Setup > 3D Viewing Notice

Signal > Auto Setup

Signal > Tracking

Signal > Sync.

pl3010_3010e_UG.book Page 46 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 47

WirelessHD Settings

Use these options to manage the WirelessHD connection and access the WirelessHD reception monitor.

Device Connections

Select this option to display a list of available WirelessHD devices.

Use the arrow keys to navigate the menu and press Enter to select a device.

WirelessHD

Enables or disables the projectors WirelessHD connection.

Reception

Select this option to display the WirelessHD reception monitor.

Rename Device Name

Use this option to rename the devices displayed in the WirelessHD Device Connections menu.

Erase Device Name

Use this option to delete the names of devices displayed in the WirelessHD Device Connections menu and return them to their default values.

Settings > WirelessHD > Device Connections

Settings > WirelessHD > WirelessHD

Settings > WirelessHD > Reception

Settings > WirelessHD > Rename Device Name

Settings > WirelessHD > Erase Device Name

pl3010_3010e_UG.book Page 47 Wednesday, September 7, 2011 6:28 PM

48 Making Detailed Adjustments

Reset

Select this option to reset all WirelessHD settings and return them to their default values.

Split Screen Setup

Press the Menu button while in Split Screen mode to access this menu.

Screen Size

Adjusts the size of the two screens. Choose Larger Left to increase the size of the left screen, Larger Right to increase the size of the right screen, or Equal to split the display evenly between the two screens.

Note: Depending on the source and resolution of each input, the two screens may not appear to be of equal size when the Equal option is selected.

Source

Select this option to open the Source menu and select which inputs should be displayed in split screen mode.

The Left and Right columns represent the left and right screens. Use the arrow buttons on the remote control to highlight Left or Right for the source you want to display. Press Enter on the remote control to select an option.

Once you have finished making your selections for both screens, select Execute to exit the Source menu and apply these settings.

Note: Certain combinations of sources cant be selected. Invalid input combinations will be grayed out.

Settings > WirelessHD

Split Screen Setup > Screen Size

Split Screen Setup > Source

pl3010_3010e_UG.book Page 48 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 49

Swap Screens

Select this option to quickly switch the images on the left and right sides of the split screen display.

Audio Source

Use this setting to select which screens audio you want to hear while in split screen mode.

Note: Select Auto to hear audio from either the largest screen or the screen on the left (depending on the Screen Size setting).

Selecting Memory Settings and Resetting the Projector

Your projector comes with 8 memory locations that are reserved for color mode calibration by installers. In addition, there are 2 memory locations where you can save other customized settings to obtain the best picture quality for each of your video inputs.

Note: Certain menu options may not be available when Auto is selected as the Color Mode.

Creating Memory Settings

Memory settings can be used to store most of the picture quality settings on page 41 and color settings on page 43. Before saving them to memory, adjust the settings to the desired levels.

1. Press the Memory button on the remote control.

2. Select Save Memory.

3. Select the memory name you want to use, then press the Enter button to save your settings.

Note: Saved settings are indicated by a green highlight next to the memory name. If you select a name that is already in use, the existing settings will be erased and new ones saved in their place.

Split Screen Setup > Swap Screens

Split Screen Setup > Audio Source

pl3010_3010e_UG.book Page 49 Wednesday, September 7, 2011 6:28 PM

50 Making Detailed Adjustments

Selecting Memory Settings

You can easily recall the memory settings by using the Memory button on the remote control.

1. Press the Memory button on the remote control.

2. Select Load Memory.

3. Use the arrow buttons to select the desired setting, then press the Enter button.

After a moment, the image appears on the screen using the retrieved settings. Certain settings may not be applied, depending on the input signal.

Renaming Memory Settings

You can rename memory settings so that they are easier for you to recognize.

1. Press the Memory button on the remote control.

2. Select Rename Memory.

3. Select the memory name you want to change, then press the Enter button. The name selection screen is displayed.

4. Do one of the following:

To select a name from the displayed preset names, select the desired name and press the Enter button.

To create your own name, select Customized and use the keyboard screen to enter the name. Use the arrow buttons to select a character, then press the Enter button. When you have selected all of the characters in your name, select Finish and press the Enter button.

pl3010_3010e_UG.book Page 50 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 51

Deleting Saved Memory Settings

You can clear all your memory settings at once.

1. Press the Menu button on the remote control.

2. Open the Reset menu, then select Reset Memory.

3. Select Yes, then press the Enter button to delete the memory settings.

Note: You can delete memory settings one at a time with the Erase Memory setting under the Memory menu.

Resetting the Projector

If the image quality isnt what you expect, one or more settings may be adjusted improperly. If necessary, you can restore the projector to its factory-default (original) settings.

To restore the settings in a specific menu (such as the Image or Settings menu), open that menu, select Reset, and confirm as needed. The example below shows how to reset the Image menu settings:

You can also reset the lamp usage timer or restore all the projector settings to their original values. Follow these steps:

1. Press the Menu button on the remote control.

2. Open the Reset menu.

Open the Image menu . . .

and select Reset

pl3010_3010e_UG.book Page 51 Wednesday, September 7, 2011 6:28 PM

52 Making Detailed Adjustments

3. Do one of the following:

Select Reset Lamp Hours to clear the lamp usage timer and reset it to zero. You should reset the lamp timer only when you install a new projector lamp. See page 67 for more information.

Select Reset Memory to clear all memory settings.

Select Reset All to return all projector settings to their original defaults (except Input Signal, User Button, Language, and Lamp Hours).

Customizing Projector Features

Use the settings in this section to adjust the image size and position, suppress on-screen text, and select basic setup options.

Image Sizing

Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture youre viewing (see page 27).

Overscan

For component and HDMI video formats, this setting lets you see the edges of the image that are not normally visible in the picture (see page 81). If you see interference when you set Overscan to Off, try adjusting the Position as described below.

Note: The Auto setting is only available when the input source is HDMI1, HDMI2, or WirelessHD.

Position

Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port or the WirelessHD connection (PowerLite Home Cinema 3010e only).

Use the arrow buttons to fine-tune the position of the image on the screen.

Signal > Advanced > Overscan

Signal > Position

pl3010_3010e_UG.book Page 52 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 53

Aspect

This setting lets you change the aspect ratio of your image, and works the same as pressing the Aspect button on the remote control. See page 27 for more information.

Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port, the aspect ratio is automatically selected and you cannot change it.

If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image.

For details on how the projector resizes the picture when you choose an Aspect setting, see page 81.

Zoom Caption Pos.

Lets you adjust the shape and position of the image so that subtitles are visible (available only if the Aspect setting has been set to Zoom). Adjust Overscan before changing the zoom position.

Screen Options

Messages

Turn this setting off if you want to prevent on-screen messages from appearing (such as the no-signal message, or the identifying text that appears when you switch between image sources or color modes).

Startup Screen

Turn this setting off if you want to prevent the startup screen from appearing while the projector is warming up.

Display Background

Changes the screen thats used when the projector is not receiving a signal or when you press the A/V Mute button to temporarily stop projection.

Signal > Aspect

Signal > Zoom Caption Pos.

Extended > Display > Messages

Extended > Display > Startup Screen

Extended > Display > Display Background

pl3010_3010e_UG.book Page 53 Wednesday, September 7, 2011 6:28 PM

54 Making Detailed Adjustments

Other Setup Options

Projection

You can select different options for projecting the image: Front, Front/Ceiling, Rear, Rear/Ceiling.

Note: Only the Front option is available when the Color Mode is set to Auto.

Direct Power On

Sets projection to start without pressing the P power button on the projector or the On button on the remote control.

Note: When Direct Power On is enabled, power surges that occur after a power outage can cause the projector to turn on.

Video Signal

Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).

Component

Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipments signal.

Illumination

Turn off this setting to deactivate the lights on the projectors P power button and power light. Use this setting if you find the lights distracting in a darkened room.

Settings > Projection

Extended > Operation > Direct Power On

Extended > Input Signal > Video Signal

Extended > Input Signal > Component

Extended > Operation > Illumination

pl3010_3010e_UG.book Page 54 Wednesday, September 7, 2011 6:28 PM

Making Detailed Adjustments 55

Sleep Mode

Turn off this setting if you dont want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.)

Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. 30min. is the default setting.

To turn the projector back on, press the Ppower button on the projector or the On button on the remote control.

Child Lock

Lets you lock the Ppower button on the projectors control panel to make it more difficult for a child to turn on the projector. See page 36 for more information.

Control Panel Lock

Lets you disable all the buttons on the projectors control panel to prevent the image from being accidentally changed once it is adjusted. See page 36 for more information.

High Altitude Mode

Adjusts the speed of the fan so it can properly cool the projector at higher altitudes. Turn this setting on if you are using the projector at an altitude of 4921 feet (1500 meters) or higher.

Note: The maximum operating altitude is 7500 feet (2286 meters).

Extended > Operation > Sleep Mode

Settings > Lock Setting > Child Lock

Settings > Lock Settings > Control Panel Lock

Extended > Operation > High Altitude Mode

pl3010_3010e_UG.book Page 55 Wednesday, September 7, 2011 6:28 PM

56 Using WirelessHD

Using WirelessHD

You can use the included WirelessHD Transmitter (PowerLite Home Cinema 3010e only) to wirelessly stream HD content from a video device to the projector.

Placing the WirelessHD Transmitter

Place the WirelessHD Transmitter so that the units lights face the front of the projector. Make sure the transmitter is within 32 feet (10 meters) of the projector and is located in the same room.

Note: The wireless transmission range may vary depending on the placement and size of surrounding objects. Avoid placing the transmitter in an area with many large or metal objects and do not place the transmitter on a metal surface, as this may interfere with the signal.

Use the images below to determine the best placement for the WirelessHD Transmitter (the shaded areas represent the WirelessHD transmission area):

16 feet (5 m)

32 feet (10 m)

16 feet (5 m)

32 feet (10 m)

pl3010_3010e_UG.book Page 56 Wednesday, September 7, 2011 6:28 PM

Using WirelessHD 57

Setting Up a WirelessHD Connection

To prepare your device to work with the WirelessHD button, follow these steps:

1. Follow the instructions on the previous page and place the transmitter within range of the projector.

2. Plug the AC adapter into the transmitter and an electrical outlet.

3. Connect an HDMI cable to your video device and the HDMI port on the side of the WirelessHD Transmitter.

4. Turn on the power switch on the back of the transmitter.

5. Turn on your source device and begin playback.

6. Turn on the projector.

7. Press the WirelessHD button on the projector remote control.

Your projector should now display content from your video device. If it doesnt, see Solving WirelessHD Problems on page 75.

pl3010_3010e_UG.book Page 57 Wednesday, September 7, 2011 6:28 PM

58 Using HDMI Link

Using HDMI Link

When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them using the HDMI Link control buttons on the projectors remote control. This lets you use just one remote control to operate many commonly used features on all your devices.

In a typical configuration, your DVD player may be connected to the projector through an amplifier or home theater system. Even if the amplifier does not conform to the HDMI CEC standard, you can still use the projectors HDMI Link control buttons to operate the DVD player as long as the DVD player conforms to the HDMI CEC standard.

Note: Some HDMI CEC functions may not operate, depending on the connected products design and compliance with the HDMI CEC standard.

Setting Up HDMI Link

To prepare your devices to work with the HDMI Link control buttons, follow these steps:

1. Press the HDMI Link button on the projectors remote control.

2. Select HDMI Link and set it to On.

3. Press the HDMI Link button to exit the menu system.

Amplifier DVD player

HDMIHDMI

pl3010_3010e_UG.book Page 58 Wednesday, September 7, 2011 6:28 PM

Using HDMI Link 59

4. Set up your connected devices so their HDMI CEC-compatible functions are enabled. For details, refer to the device manufacturers documentation.

Changing HDMI Link Settings

1. Press the HDMI Link button on the projectors remote control.

2. Select Device Connections. You see this screen:

3. Use the u and d arrow buttons to select the device you want to operate, then press Enter. Devices are listed by type (Player, Recorder, AV System, or Tuner) and by name, if the model number is available.

4. Once the device is selected, use the HDMI Link control buttons on the remote control to operate it. You can also use the On and Standby buttons, arrow buttons, Enter, and Esc. Commonly available functions include turning on the device when its in standby mode, starting playback, adjusting the volume, and operating the devices link menu.

In addition, HDMI Link allows your projector and other devices to be turned on and off together:

If you turn on a connected device, the projector automatically turns on and switches to the correct input source.

If you turn on the projector, connected devices such as an amplifier and DVD player are turned on. If multiple video devices are connected, the one last used is turned on. When you turn off the projector, the connected devices are turned off.

Note: For this to work, the CEC power link function of the connected devices must be enabled.

pl3010_3010e_UG.book Page 59 Wednesday, September 7, 2011 6:28 PM

60 Maintenance

Maintenance

Your projector needs little maintenance. All you need to do on a regular basis is keep the lens clean. You also may need to clean the air filter to prevent overheating.

Warning: Before you clean any part of the projector, turn it off and unplug the power cord. Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages in the projector can injure you severely. Do not try to service this product yourself, except as specifically explained in this Users Guide.

The only parts you should replace are the air filter and the lamp. If another part needs replacing, contact your dealer or a qualified servicer.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.

Use a blower brush that is designed for camera equipment to remove dust from the lens.

To remove dirt or smears, use a lens cloth or tissue. If necessary, moisten the cloth with lens cleaner and gently wipe the lens surface.

Caution: Never rub the lens with abrasive materials. Use only lens cleaning fluids that are designed for cleaning optics.

pl3010_3010e_UG.book Page 60 Wednesday, September 7, 2011 6:28 PM

Maintenance 61

Cleaning the 3D Glasses

Use the included lint-free cloth (do not use paper towels) to gently wipe the 3D glasses whenever you notice dust or dirt on the surface.

Caution: Never rub the 3D glasses with abrasive materials.

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power cord.

To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case and dry it with a dry cloth.

Caution: Never use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case.

pl3010_3010e_UG.book Page 61 Wednesday, September 7, 2011 6:28 PM

62 Maintenance

Cleaning and Replacing the Air Filter

Your projector includes an air filter to ensure the best performance. If dust collects on the air filter, clean it as described below. Dust clogs prevent proper ventilation and cause overheating and damage to the projector.

You can replace the air filter while the projector is mounted to the ceiling, if necessary. The illustrations here show the projector placed on a table.

1. Press the Ppower button on the projector twice or the Standby button on the remote control and wait for the power light to stop flashing. The projector cools down.

2. Unplug the power cord.

3. Pull straight out on the filter holder to remove it.

4. Remove the air filter as shown.

pl3010_3010e_UG.book Page 62 Wednesday, September 7, 2011 6:28 PM

Maintenance 63

5. Gently tap both sides of the air filter against a hard surface four or five times to remove loose dust from the air filter.

Note: Do not use excessive force when tapping the air filter, or it may crack and become unusable. Do not rinse the air filter in water, or use any detergent or solvent to clean it. Do not used canned air, or the gases may leave a residue.

6. Use a small vacuum cleaner that is designed for computers and other office equipment to remove any remaining dust from the surface of the filter. If you dont have one, gently clean the filter using a very soft brush (such as a clean artists paintbrush).

If the dirt is difficult to remove or the filter is broken, replace it. You can purchase air filter part number V13H134A38 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

7. Insert the air filter as shown.

8. Slide the air filter holder back into place.

pl3010_3010e_UG.book Page 63 Wednesday, September 7, 2011 6:28 PM

64 Maintenance

Replacing the Lamp

The projection lamp lasts for up to 4000 hours in Normal mode. You can use the Info menu to check how long its been in use (see page 67). Its time to replace the lamp when:

The projected image gets darker or starts to deteriorate.

The projectors lamp light flashes orange or red at half-second intervals.

The message Replace the lamp appears on the screen when you start projecting.

Note: Lamp life results will vary depending on mode selected, environmental conditions, and usage.

Turn off this product when not in use to prolong the life of the projector.

You can purchase lamp part number V12H010L68 from an authorized Epson reseller. To find the nearest reseller, please call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Be sure to read the Important Safety Information on page 84 before replacing the lamp.

Warning: Let the lamp cool fully (about 1 hour) before replacing it. In the unlikely event that the lamp has broken, small glass fragments may be present and should be removed carefully to avoid injury.

Caution: Never touch the glass portion of the lamp with your bare hands; the invisible residue left by the oil on your hands may shorten the lamp life. Use a cloth or glove to handle the new lamp.

Follow these steps to replace the lamp:

1. If the projector is on, press the P power button on the projector twice or the Standby button on the remote control and wait for the light to stop flashing.

2. Unplug the power cord and any cables.

3. Wait about an hour to make sure the lamp is no longer hot.

4. Loosen the screw securing the lamp cover.

pl3010_3010e_UG.book Page 64 Wednesday, September 7, 2011 6:28 PM

Maintenance 65

5. Remove the lamp cover as shown.

6. Loosen the screws securing the lamp (they dont come all the way out).

7. Lift up the lamp handle and gently pull the lamp out of the projector.

Warning: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

pl3010_3010e_UG.book Page 65 Wednesday, September 7, 2011 6:28 PM

66 Maintenance

8. Gently insert the new lamp into the projector and press the handle down. Tighten the screws.

Caution: Dont touch the glass portion of the lamp assembly. Touching the glass could result in premature lamp failure.

9. Replace the lamp cover. (The projector wont work if the lamp cover is open or loose.)

10. Tighten the lamp cover screw.

11. Reset the lamp usage timer, as described on page 67.

pl3010_3010e_UG.book Page 66 Wednesday, September 7, 2011 6:28 PM

Maintenance 67

Resetting the Lamp Usage Timer

After replacing the lamp, plug the projector back in and press the Ppower button on the projector or the On button on the remote control. Then follow these steps to reset the lamp usage timer:

1. Press the Menu button on the projector or remote control.

2. Use the menu navigation buttons to open the Reset menu, then select Reset Lamp Hours.

3. When you see a confirmation prompt, highlight Yes and press the Enter button.

4. When youre finished, press the Menu button to exit.

The lamp usage timer shows 0H until youve used the lamp for at least 10 hours.

Checking the Projector Status

You can use the Info menu to view information about the current display settings and how long the projection lamp has been in use. To access the Info menu:

1. Press the Menu button on the projector or remote control.

2. Use the menu navigation buttons to open the Info menu. The following information appears:

Note: The information displayed depends on the currently selected image source. The Lamp Hours shows 0H until youve used the lamp for at least 10 hours.

The resolution indicates the total number of scan lines in the source signal. The number of visible scan lines depends on the signal format standard and selected display settings (see page 81).

Lamp Hours 3D Format

Source Sync Info

Input Signal Video Signal

Resolution Deep Color (color depth)

Scan Mode Status (error information)

Refresh Rate Serial Number

pl3010_3010e_UG.book Page 67 Wednesday, September 7, 2011 6:28 PM

68 Maintenance

Storing the Projector

If you need to store the projector for an extended time, do the following:

Make sure the temperature of the storage area is within 14 to 140 F (10 to 60 C).

Attach the lens cover and retract the feet.

Remove the batteries from the remote control.

Pack the projector in its original packaging or equivalent.

Transporting the Projector

Note: Epson shall not be liable for any damages incurred during transportation.

The projector contains many glass and precision parts. When shipping the projector for repairs, use the original packaging material if possible. If you do not have the original packaging, use equivalent materials. Do not used materials that can become lodged in the projector vents. Be sure the carrier is capable of transporting fragile equipment and is aware that the projector is fragile.

pl3010_3010e_UG.book Page 68 Wednesday, September 7, 2011 6:28 PM

Problem Solving 69

Problem Solving

This section explains how to interpret the projectors status lights, solve problems with the picture and remote control, and contact technical support.

What To Do When the Lights Come On or Flash

The lights on top of the projector indicate the projectors status and let you know when a problem occurs.

If the projector isnt working correctly, first press the P power button, let the projector cool down, and unplug the power cord. Then plug the power cord back in and turn on the projector. If this doesnt solve the problem, check the status lights on top of the projector.

Note: If the power button and light dont come on, they may have been turned off using the Illumination setting (see page 54).

Lights indicating normal operation

Light state Cause and solution

All lights are off The projector is turned off. If necessary, connect the power cord.

Power button is on, power light is off

The projector is in standby mode. Press the Ppower button on the projector or the On button on the remote control to turn it on.

pl3010_3010e_UG.book Page 69 Wednesday, September 7, 2011 6:28 PM

70 Problem Solving

Power button is on, power light flashes blue

The projector is warming up. Wait for the picture to appear.

The projector is cooling down. Wait until the power light stops flashing and remains off. Then unplug the projector, or press the Ppower button on the projector or the On button on the remote control to turn it back on.

Power button and power light are on

Projection is in progress.

Lights indicating a problem

Light state Cause and solution

All lights are off The projector is not receiving power. Make sure the power cord is connected securely at both ends.

The temperature light flashes orange

High-speed cooling is in progress. If the temperature rises further, projection will stop automatically. Make sure there is plenty of space around the projector for ventilation. Clean or replace the air filter if necessary (see page 62).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 55).

The temperature light is red

The projector is too hot, which turns off the lamp automatically. Let the projector cool for five minutes, then turn it back on. Make sure there is plenty of space around the projector for ventilation. Also, clean or replace the filter if necessary (see page 62).

If you are using the projector at an altitude above 4921 feet (1500 meters), turn on High Altitude Mode so the fan can cool the projector properly (see page 55).

The lamp light flashes orange

The lamp needs to be replaced.

The lamp light flashes red

There is a problem with the lamp. If you just replaced the lamp, make sure the lamp and its cover are securely installed (see page 64). Turn off the projector and unplug it from the electrical outlet. Wait for the lamp to cool. then remove the lamp and check it for cracks. If the lamp isnt cracked, reinstall it, plug the projector into an outlet, and turn the power on. If this doesnt fix the problem, or if the lamp is cracked, contact Epson for assistance (see page 77).

Lights indicating normal operation

Light state Cause and solution

pl3010_3010e_UG.book Page 70 Wednesday, September 7, 2011 6:28 PM

Problem Solving 71

Solving Picture Problems

You cannot turn on the projector.

Make sure the power cord is connected. Then wait a moment for the Ppower button to light up before pressing the Ppower button on the projector or the On button on the remote control.

If youve set the Control Panel Lock, the control panel buttons are disabled; you must use the remote control to turn on the projector (see page 36).

If youve set the Child Lock, you have to press the Ppower button on the projector for 3 seconds to turn on the projector, or use the remote control (see page 36).

No picture appears on the screen or you see the No Signal message displayed.

Press one of the Source buttons on the remote control, or press the Source button on the projector, to select the correct input source. Allow a few seconds for the projector to sync up after pressing the button.

Press the A/V Mute button on the remote control to make sure the picture hasnt been turned off temporarily.

Check that the power light is on and not flashing, and the lens cover is off.

The projector may be in standby (or sleep) mode. If the Ppower button is lit and the power light is off, press the Ppower button to turn the projector back on.

Make sure your video equipment is turned on.

Make sure your cable(s) are connected correctly (see page 18).

The temperature light flashes red

There is a fan or sensor problem. Turn off the projector and unplug it from the electrical outlet. Then contact Epson for assistance (see page 77).

Both warning lights are flashing red

There is an internal problem. Turn off the projector and unplug it from the electrical outlet. Then contact Epson for assistance (see page 77).

Lights indicating a problem

Light state Cause and solution

pl3010_3010e_UG.book Page 71 Wednesday, September 7, 2011 6:28 PM

72 Problem Solving

3D content does not display or does not display correctly.

Press the 2D/3D button on the remote control to switch to 3D viewing mode, if necessary.

Make sure that you are within the 3D viewing range (see page 12).

Check that your video device and media are both 3D-compatible. Refer to the documentation that came with your video device for more information.

Press the Menu button on the remote control, select the Signal menu, then 3D Setup, then select 3D Format. Make sure that the Auto option is selected.

Make sure that the Inverse 3D Glasses option is set to No (see page 45).

If your video device is connected with the WirelessHD Transmitter (PowerLite Home Cinema 3010e only), see page 75.

Only part of the picture is displayed, or the picture is distorted.

Press the Aspect button on the remote control to select a different aspect ratio (see page 27).

If the Aspect is set to Zoom, you may need to use the Zoom Caption Pos. option to see the top or bottom section of the screen so that subtitles are visible (see page 53).

Check the Overscan to make sure its adjusted correctly (see page 52).

Use the Position setting to reposition the image on the screen (see page 52).

If youve connected a computer and you see only half the image, make sure the computers Dual Display setting is turned off.

If part of the image is cut off, reset the projector settings (see page 51).

If your video device is connected with the WirelessHD Transmitter (PowerLite Home Cinema 3010e only), make sure you are within the wireless transmission range (see page 56).

Youre using a computer and no picture appears on the screen.

If youre using a Windows laptop:

Press the function key that lets you display on an external monitor. Its often labeled with an icon such as , but it may also be labeled CRT/LCD. You may have to hold down the Fn key while pressing it. Check your laptops manual or online help.

On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time. Allow a few seconds for the projector to sync up after pressing it.

pl3010_3010e_UG.book Page 72 Wednesday, September 7, 2011 6:28 PM

Problem Solving 73

If the function key doesnt let you display simultaneously on both screens, you might need to use the Display utility in the Windows Control Panel to make sure that both the LCD screen and external monitor port are enabled. From the Windows Control Panel, open the Display utility. In the Display Properties dialog box, click the Settings tab, then click Advanced. The method for adjusting the setting varies from computer to computer; you may need to click a Monitor tab, then make sure the external Monitor port is set as your primary display or enabled. See your computer manual or online help for details.

If youre using Mac OS X:

1. Open the System Preferences utility and select Displays.

2. Select the VGA Display or Color LCD option, if necessary.

3. Click the Arrange or Arrangement tab.

4. Check the Mirror Displays checkbox. (See your computer manual for details.)

The picture is upside-down or reversed.

Change the Projection setting in the Settings menu (see page 54).

The picture isnt rectangular.

If the image looks like or , the projector has been placed off to one side of the screen and angled toward it. Face the projector straight ahead (instead of at the center of the screen), then use the horizontal keystone slider to correct the image (see page 24).

If the image looks like or , make sure the projector is not tilted up or down, then use the vertical keystone buttons to adjust the image (see page 24).

The picture contains static or noise.

Make sure the Input Signal is set correctly for your connected video equipment (see page 54).

If youre viewing still images and you notice flickering or horizontal lines, turn on the Progressive setting (see page 42).

Make sure your cables are securely connected at both ends.

If youre using an extension cable, you may pick up interference if the cable is not adequately shielded. You may need to use a signal amplifier for longer cables.

If youre displaying the same image on your computer and projector screen, try turning off your laptops LCD display (see page 72).

pl3010_3010e_UG.book Page 73 Wednesday, September 7, 2011 6:28 PM

74 Problem Solving

The picture is blurry.

Make sure the Input Signal is set correctly for your video equipment (see page 54).

There may be dirt on the lens. Clean the lens as described on page 60.

Adjust the focus (see page 26).

Make sure the lens is not fogged by condensation. If youve just moved the projector from a cold environment, wait a couple of minutes before using it.

Adjust the Sharpness setting (see page 41).

If youre projecting from a computer, you may need to adjust the Tracking and Sync settings (see page 46).

The colors on the screen dont look right.

Make sure the Input Signal is set correctly for your connected video equipment (see page 54).

Press the Color Mode button on the remote control to select a different color mode (see page 32).

Check the brightness and contrast settings (see page 39).

Fine-tune the colors with the settings listed on page 43.

If the picture looks dark, you may need to replace the lamp. Check the lamp usage timer to see how long the lamp has been in use (see page 67). Replace the lamp if its close to the end of its service life (see page 64).

pl3010_3010e_UG.book Page 74 Wednesday, September 7, 2011 6:28 PM

Problem Solving 75

Solving Remote Control Problems

The projector doesnt respond to remote control commands.

Make sure youre within about 32 feet (10 m) of the projector, and the remote control is aimed at the projectors front or back sensor within the ranges shown below.

You may need to replace the remote control batteries (see page 21). Press the illumination button and check if the buttons glow. If they dont, replace the batteries.

Dim the room lights and turn off any fluorescent lights. Make sure the projector is not in direct sunlight.

Turn off nearby equipment that emits infrared energy, such as a radiant room heater.

Make sure there are no objects between the remote control and the IR receiver.

Solving WirelessHD Problems

The projector cannot display images from the WirelessHD Transmitter.

Open the WirelessHD reception monitor and check the strength of the WirelessHD signal (see page 47). If the signal is weak, you may need to move the transmitter closer to the projector or remove any large objects located between the transmitter and the projector.

32 ft (10 m) 32 ft (10 m)

32 ft (10 m)32 ft (10 m)

pl3010_3010e_UG.book Page 75 Wednesday, September 7, 2011 6:28 PM

76 Problem Solving

Make sure that your projector is connected to the correct WirelessHD device. SeeWirelessHD Settings on page 47 for more information.

You may need to reset the WirelessHD connection. Turn off both the WirelessHD Transmitter and the projector. Start playback on your video device, then turn on the WirelessHD Transmitter and the projector. Wait 10 seconds, then press the Setup button on the back of the transmitter.

Make sure the WirelessHD Transmitter is not placed on a metal surface, as this may interfere with the signal.

If the green and orange lights on the transmitter are flashing, the unit may be overheating. Make sure the vents on the back of the transmitter are not blocked and that the room temperature does not exceed 95 F (35 C).

WirelessHD images are displayed, but the picture quality is low.

The resolution and overall image quality are automatically adjusted based on the strength of the WirelessHD signal. Check the WirelessHD reception (see page 47) and adjust the position of the transmitter, if necessary.

pl3010_3010e_UG.book Page 76 Wednesday, September 7, 2011 6:28 PM

Problem Solving 77

Where to Get Help

Internet Support

Epson provides technical assistance 24 hours a day at epson.com/support (U.S.) or epson.ca/support (Canada). Here you can access troubleshooting information, download product documentation, and receive technical advice through email.

Speak to a Support Representative

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card that came with your projector. This is the fastest way of speaking to a live representative, and its free. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period.

You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday

Canada: (905) 709-3839, 6 AM to 8 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Before you call, please have the following information ready:

Product name (PowerLite Home Cinema 3010 or PowerLite Home Cinema 3010e)

Product serial number (located on the bottom of the projector or in the projectors Info menu)

Computer configuration, if youre connected to a computer

Description of the problem

Purchase Supplies and Accessories

You can purchase screens, carrying cases, or other accessories from an authorized Epson reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). To purchase online, visit www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

pl3010_3010e_UG.book Page 77 Wednesday, September 7, 2011 6:28 PM

78 Specifications

Specifications

General

Type of display Poly-silicon TFT active matrix

Size of LCD panels 0.61 inch (15.5 mm) wide

Lens F=1.51 to 1.99

Resolution (native format) 1920 1080 pixels, 1080p

Brightness Normal mode: White light output up to 2200 lumens (ISO 21118 standard) Color light output up to 2200 lumens

ECO mode: White light output up to 1000 lumens

Dynamic contrast ratio 2D: Up to 40,000:1

3D: Up to 1,600:1

Image size 30 to 300 inches (0.76 to 7.62 m)

Projection distance 2.85 to 47.57 feet (0.87 to 14.50 m)

Zoom ratio 1 to 1.6

Aspect ratio 16:9 (supports 4:3 to 16:10)

Internal sound system 10 W per channel (stereo)

Fan noise level Normal mode: 32 dB

ECO mode: 24 dB

Lamp

Note: Lamp life will vary depending on mode selected, environmental conditions, and usage. Brightness decreases over time.

Turn off this product when not in use to prolong the life of the projector.

Type UHE (Ultra High Efficiency), E-TORL

pl3010_3010e_UG.book Page 78 Wednesday, September 7, 2011 6:28 PM

Specifications 79

Power consumption 230 W

Lamp life 4000 hours (Normal mode) 5000 hours (ECO mode)

Part number V12H010L68

Remote Control

Range Approximately 32 feet (10 m)

Batteries AA 2

WirelessHD Transmitter (Home Cinema 3010e only)

Usable frequency 60 GHz band (2 3 ch)

AC adapter 4.75 5.25 V DC

Transmission range 32 feet (10 m)

WirelessHD standards Conforms to WirelessHD Ver. 1.0a

Power consumptions During operation: 5.6 W

During standby: 0.71 W

Operating temperature 41 to 95 F (5 to 35 C)

Copyright protection HDCP compatible

Dimensions Height: 2.3 inches (59 mm)

Width: 6.1 inches (157 mm)

Depth: 2.4 inches (61 mm)

Weight Approx. 0.4 lb (0.2 kg)

Dimensions

Height 5.4 inches (137.3 mm), not including adjustable feet

Width 14.4 inches (365 mm)

Depth 16.5 inches (420 mm); not including lens protrusion

Weight 13.2 lb (6.0 kg) (Home Cinema 3010) 13.7 lb (6.2 kg) (Home Cinema 3010e)

pl3010_3010e_UG.book Page 79 Wednesday, September 7, 2011 6:28 PM

80 Specifications

Electrical

Rated frequency 50/60 Hz AC

Power supply 100 to 120 V AC: 3.7 A

200 to 240 V AC: 1.7 A

Power consumption 100 to 120 V AC: Operating: 372 W (Normal mode) 285 W (ECO mode) Standby: 0.25 W (with HDMI Link enabled)

220 to 240 V AC: Operating: 358 W (Normal mode) 274 W (ECO mode) Standby: 0.35 W (with HDMI Link enabled)

Environmental

Temperature Operating: 41 to 95 F (5 to 35 C) Storage: 14 to 140 F (10 to 60 C)

Humidity Operating: 20 to 80% RH, non-condensing Storage: 10 to 90% RH, non-condensing

Operating altitude Up to 7500 feet (2286 meters); over 4921 feet (1500 meters), enable High Altitude mode in the Operation menu (see page 55)

Safety

United States FCC Part 15B Class B (DoC) UL60950-1 2nd edition

Canada ICES-003 Class B CSA C22.2 No. 60950-1-07

Pixelworks DNX ICs are used in this projector.

pl3010_3010e_UG.book Page 80 Wednesday, September 7, 2011 6:28 PM

Specifications 81

Compatible Video Formats

The projector supports analog video in NTSC, PAL, and SECAM formats, and it automatically adjusts to the incoming signal. It can receive these formats as composite or component videowhich it accepts through the Video and Component ports, respectively.

The projector also supports digital video (SDTV, HDTV) and various monitor display formats. Digital video is accepted by the HDMI and Component video ports. The PC port accepts analog RGB computer monitor signals.

If necessary, you can select a different Aspect setting to optimize the image. The resolution at which the image displays for a given setting depends on the currently active picture source, as listed in the following tables.

Composite video

Component video

Format Refresh rate (Hz) Resolution

NTSC 60 720 480

PAL 50/60 720 576

SECAM 50 720 576

Format/

Signal Refresh rate (Hz) Resolution

SDTV

480i 576i 480p 576p

60 50 60 50

720 480 720 576 720 480 720 576

HDTV

720p 1080i 1080p

50/60 50/60 50/60

1280 720 1920 1080 1920 1080

pl3010_3010e_UG.book Page 81 Wednesday, September 7, 2011 6:28 PM

82 Specifications

Analog RGB (computer display)

HDMI

3D mode

WirelessHD

Signal Refresh rate (Hz) Resolution

VGA 60/72/75/85 640 480

SVGA 56/60/72/ 75/85 800 600

XGA 60/70/75/85 1024 768

SXGA

70/75/85 60/75/85 60/75/85

1152 864 1280 960 1280 1024

WXGA

60 60 60/75/85

1280 768 1360 768 1280 800

Signal Refresh rate (Hz) Resolution

VGA 60 640 480

SDTV 480i 576i 480p 576p

60 50 60 50

720 480 720 576 720 480 720 576

HDTV 720p 1080i 1080p

50/60 50/60 24/50/60

1280 720 1920 1080 1920 1080

Signal Refresh rate (Hz) Resolution

HDTV 720p 1080i 1080p

50/60 50/60 24/50/60

1280 720 1920 1080 1920 1080

Signal Refresh rate (Hz) Resolution

VGA 60 640 480

SDTV 480i 576i 480p 576p

60 50 60 50

720 480 720 576 720 480 720 576

pl3010_3010e_UG.book Page 82 Wednesday, September 7, 2011 6:28 PM

Specifications 83

ESC/VP21 Command Codes

You can use an AV controller with a 9-pin null modem serial cable to control the projector. You can download the complete ESC/VP 21 Communication Manual for home theater projectors from the Epson website at epson.com/support (U.S.) or epson.ca/support (Canada).

HDTV 720p 1080i 1080p

50/60 50/60 24/50/60

1280 720 1920 1080 1920 1080

Signal Refresh rate (Hz) Resolution

pl3010_3010e_UG.book Page 83 Wednesday, September 7, 2011 6:28 PM

84 Notices

Notices

Important Safety Information

Follow these safety instructions when setting up and using the projector:

Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes. Never let children look into the lens when it is on.

If you or any viewer experiences the following symptoms or other major discomfort from viewing 3D video images, immediately stop viewing and contact your health care provider: convulsions, eye or muscle twitching, loss of awareness, altered vision, involuntary movements, disorientation, eye strain, nausea/vomiting, dizziness, headaches, fatigue, or blurry/double vision that lasts longer than few seconds. Do not engage in any potentially hazardous activity (such as driving a vehicle or operating machinery) until your symptoms have completely gone away. If the symptoms persist, discontinue use and do not resume stereoscopic 3D viewing without discussing your symptoms with a health care provider / physician.

Some viewers may experience a seizure or blackout when exposed to flashing images or lights contained in certain 3D content. Anyone who has a history of seizures, loss of awareness, symptoms linked to an epileptic condition, or has a family history of epilepsy, should contact a health care provider before using the 3D function. It is recommended that all viewers take regular breaks while watching 3D video images or playing stereoscopic 3D games. The suggested breaks are, at least 5 to 15 minutes after every 30 to 60 minutes of stereoscopic 3D content viewing.*

*Based on the guidelines issued by the 3D Consortium revised December 10, 2008. The length and frequency of necessary breaks will vary from person to person. If you experience any discomfort, you should immediately stop watching the 3D video images or playing stereoscopic 3D games until the discomfort ends; consult a heath care provider / physician if necessary.

Due to the possible impact on vision development, viewers of 3D video images should be age 6 or older. Children and teenagers may be more susceptible to health issues associated with viewing in 3D and should be closely supervised to avoid prolonged viewing without rest.

Watching the screen while sitting too close for an extended period of time may cause eye strain. Consult your projector manual to determine the ideal viewing distance.

Viewing 3D content may cause dizziness and disorientation for some viewers. Therefore, to avoid injury do not place your projector or screen near open stairwells, balconies, or wires, and do not sit near objects that could be broken if accidentally hit.

pl3010_3010e_UG.book Page 84 Wednesday, September 7, 2011 6:28 PM

Notices 85

The following people should limit 3D content viewing: People with a history of photosensitivity People with heart disease People in poor health People who are sleep deprived People who are physically tired People under the influence of drugs or alcohol Anyone who has ever experienced epileptic seizures or sensory disturbances triggered by flashing light effects SOME LIGHT PATTERNS MAY INDUCE SEIZURES IN PERSONS WITH NO PRIOR HISTORY OF EPILEPSY.

Never open any cover on the projector, except the lamp and filter covers. Dangerous electrical voltages inside the projector can severely injure you.

Except as specifically explained in this Users Guide, do not attempt to service this product yourself. Refer all servicing to qualified service personnel.

The projector and its accessories come packaged in plastic bags. Keep plastic bags away from small children to avoid any risk of suffocation.

Dont place the projector on an unstable cart, stand, or table. Also, dont use the projector near water or sources of heat.

Use the type of power source indicated on the projector. If youre not sure of the power available, consult your dealer or power company.

Place the projector near a wall outlet where the plug can be easily unplugged.

Dont insert the plug into an outlet with dust present, and insert the plug firmly into the outlet. Failure to do so could result in sparks or fire.

Dont overload wall outlets, extension cords, or integral convenience receptacles. This can cause fire or electric shock.

Dont block the slots and openings in the projector case. They provide ventilation and prevent the projector from overheating. Dont operate the projector on a sofa, rug, or other soft surface, or in a closed-in cabinet unless proper ventilation is provided.

Never push objects through the cabinet slots or spill liquid into the projector.

Unplug the projector from the wall outlet and refer servicing to qualified service personnel under the following conditions: when the power cord or plug is damaged or frayed; if liquid has been spilled into the projector, or if it has been exposed to rain or water; if it doesnt operate normally when you follow the operating instructions, or if it exhibits a distinct change in performance, indicating a need for service; if it has been dropped or the housing has been damaged.

Dont place the projector where the cord can be walked on. This may result in fraying or damage to the plug.

Unplug the projector from the wall outlet before cleaning. Use a damp cloth for cleaning. Do not use liquid or aerosol cleaners.

The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling. Do not put in the trash.

pl3010_3010e_UG.book Page 85 Wednesday, September 7, 2011 6:28 PM

86 Notices

Allow the lamp to cool for one hour before replacing it.

Unplug the projector during lightning storms or when not in use for extended periods.

Dont place the projector or remote control on top of heat-producing equipment.

If you use the projector in a country other than where you purchased it, use the correct power cord for that country.

Dont stand on the projector or place heavy objects on it.

Dont use the projector outside of the required temperature range of 41 to 95 F (5 to 35 C). Doing so may cause an unstable display and could lead to projector damage.

Dont store the projector outside of the required temperature range of 14 to 140 F (10 to 60 C) or in direct sunlight for long periods of time. Doing so may cause damage to the case.

WARNING: The cords included with this product contain chemicals, including lead, known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. (This notice is provided in accordance with Proposition 65 in Cal. Health & Safety Code 25249.5 and following.)

FCC Compliance Statement

For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment

pl3010_3010e_UG.book Page 86 Wednesday, September 7, 2011 6:28 PM

Notices 87

interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the users authority to operate the equipment.

For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.

Cet appareil numrique de la classe B respecte toutes les exigences du Rglement sur le materiel brouilleur du Canada.

Copyright Notice

All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. The information contained herein is designed only for use with this Epson product. Epson is not responsible for any use of this information as applied to other products.

Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporations operating and maintenance instructions.

Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.

A Note Concerning Responsible Use of Copyrighted Materials

Epson encourages each user to be responsible and respectful of copyright laws when using any Epson product. While some countries laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding copyright law.

pl3010_3010e_UG.book Page 87 Wednesday, September 7, 2011 6:28 PM

88 Notices

Trademarks

Epson, PowerLite, and C2Fine are registered trademarks, 1080Perfect is a trademark, and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation.

PrivateLine is a registered trademark, DigiScan and AccuCinema are trademarks, and Extra Care and Epson Connection are service marks of Epson America, Inc.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing, LLC.

WirelessHD is a registered trademark of WirelessHD LLC.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all ri

Manualsnet FAQs

If you want to find out how the PowerLite Home Cinema 3010 Epson works, you can view and download the Epson PowerLite Home Cinema 3010 User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Epson PowerLite Home Cinema 3010 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Epson PowerLite Home Cinema 3010. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson PowerLite Home Cinema 3010 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson PowerLite Home Cinema 3010 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson PowerLite Home Cinema 3010 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson PowerLite Home Cinema 3010 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson PowerLite Home Cinema 3010 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.