Contents

Epson PowerLite 85 Quick Setup PDF

1 of 8
1 of 8

Summary of Content for Epson PowerLite 85 Quick Setup PDF

Quick Setup Before using the projector, make sure you read the safety instructions in the Users Guide on your projector CD.

Connect the projector Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projectors Computer1 or Computer2 port, and the other end to your computers monitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone.

Computer USB Port

Connect a computer (Windows 2000 or later only) using the USB cable that came with the projector.

Connect the square end of the USB cable to the projectors Type B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone.

Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control.

Network (LAN)

Connect the projector to your network using an Ethernet cable. See Project Over the Network on the back of this sheet for more information.

Microphone

Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video Player

Connect up to 4 video devices and use the remote control to switch between them.

RCA video cable (composite video)

(optional)

S-Video cable

(optional)

Component video to VGA cable

(optional) Audio cable (optional)

Camera or USB Device

Connect a digital camera, document camera, or other USB device to the projectors Type A (flat) USB port.

If you connect a digital camera or USB storage device, you can use the projectors Slideshow feature. See the EasyMP Operation Guide on your projector CD.

For information on playing sound through the projector or connecting an external monitor, see the Users Guide on your projector CD.

Turn on your equipment 1 Turn on your computer or video source.

2 Plug in the projector.

3 Open the A/V Mute slide all the way.

4 Press the power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the power button twice, then unplug it. You dont have to wait for the projector to cool down.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or the Search button on the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position.

3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

4 If your image looks like or , youve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

5 If your image looks like or , press the or buttons on the projector to correct it.

Using the remote control Make sure the batteries are installed as shown (two AA batteries).

Change presentation

slides (USB connection only)

Navigate projector

menus

Choose which source to display

Control projector volume

Turn projector on and off

Turn off projector display and sound

You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your Users Guide.

PowerLite 85/825/826W

*411676200* *411676200*

DC-06 document camera

Digital camera

Thumb drive

Quick Setup Before using the projector, make sure you read the safety instructions in the Users Guide on your projector CD.

Connect the projector Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projectors Computer1 or Computer2 port, and the other end to your computers monitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone.

Computer USB Port

Connect a computer (Windows 2000 or later only) using the USB cable that came with the projector.

Connect the square end of the USB cable to the projectors Type B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone.

Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control.

Network (LAN)

Connect the projector to your network using an Ethernet cable. See Project Over the Network on the back of this sheet for more information.

Microphone

Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video Player

Connect up to 4 video devices and use the remote control to switch between them.

RCA video cable (composite video)

(optional)

S-Video cable

(optional)

Component video to VGA cable

(optional) Audio cable (optional)

Camera or USB Device

Connect a digital camera, document camera, or other USB device to the projectors Type A (flat) USB port.

If you connect a digital camera or USB storage device, you can use the projectors Slideshow feature. See the EasyMP Operation Guide on your projector CD.

For information on playing sound through the projector or connecting an external monitor, see the Users Guide on your projector CD.

Turn on your equipment 1 Turn on your computer or video source.

2 Plug in the projector.

3 Open the A/V Mute slide all the way.

4 Press the power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the power button twice, then unplug it. You dont have to wait for the projector to cool down.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or the Search button on the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position.

3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

4 If your image looks like or , youve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

5 If your image looks like or , press the or buttons on the projector to correct it.

Using the remote control Make sure the batteries are installed as shown (two AA batteries).

Change presentation

slides (USB connection only)

Navigate projector

menus

Choose which source to display

Control projector volume

Turn projector on and off

Turn off projector display and sound

You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your Users Guide.

PowerLite 85/825/826W

*411676200* *411676200*

DC-06 document camera

Digital camera

Thumb drive

Quick Setup Before using the projector, make sure you read the safety instructions in the Users Guide on your projector CD.

Connect the projector Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projectors Computer1 or Computer2 port, and the other end to your computers monitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone.

Computer USB Port

Connect a computer (Windows 2000 or later only) using the USB cable that came with the projector.

Connect the square end of the USB cable to the projectors Type B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone.

Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control.

Network (LAN)

Connect the projector to your network using an Ethernet cable. See Project Over the Network on the back of this sheet for more information.

Microphone

Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video Player

Connect up to 4 video devices and use the remote control to switch between them.

RCA video cable (composite video)

(optional)

S-Video cable

(optional)

Component video to VGA cable

(optional) Audio cable (optional)

Camera or USB Device

Connect a digital camera, document camera, or other USB device to the projectors Type A (flat) USB port.

If you connect a digital camera or USB storage device, you can use the projectors Slideshow feature. See the EasyMP Operation Guide on your projector CD.

For information on playing sound through the projector or connecting an external monitor, see the Users Guide on your projector CD.

Turn on your equipment 1 Turn on your computer or video source.

2 Plug in the projector.

3 Open the A/V Mute slide all the way.

4 Press the power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the power button twice, then unplug it. You dont have to wait for the projector to cool down.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or the Search button on the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position.

3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

4 If your image looks like or , youve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

5 If your image looks like or , press the or buttons on the projector to correct it.

Using the remote control Make sure the batteries are installed as shown (two AA batteries).

Change presentation

slides (USB connection only)

Navigate projector

menus

Choose which source to display

Control projector volume

Turn projector on and off

Turn off projector display and sound

You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your Users Guide.

PowerLite 85/825/826W

*411676200* *411676200*

DC-06 document camera

Digital camera

Thumb drive

Quick Setup Before using the projector, make sure you read the safety instructions in the Users Guide on your projector CD.

Connect the projector Choose from the following connections:

Computer Monitor Port

Connect a computer using the VGA cable that came with the projector.

Connect one end to the projectors Computer1 or Computer2 port, and the other end to your computers monitor port. If you are using a notebook, switch it to external display. You can also connect an audio cable or microphone.

Computer USB Port

Connect a computer (Windows 2000 or later only) using the USB cable that came with the projector.

Connect the square end of the USB cable to the projectors Type B (square) USB port. Connect the flat end of the cable to any USB port on your computer. You can also connect an audio cable or microphone.

Follow the on-screen instructions to install the Epson USB Display software. Then press the USB button on the remote control.

Network (LAN)

Connect the projector to your network using an Ethernet cable. See Project Over the Network on the back of this sheet for more information.

Microphone

Connect a dynamic microphone to the Mic port, using a 3.5 mm mini-jack cable.

Video Player

Connect up to 4 video devices and use the remote control to switch between them.

RCA video cable (composite video)

(optional)

S-Video cable

(optional)

Component video to VGA cable

(optional) Audio cable (optional)

Camera or USB Device

Connect a digital camera, document camera, or other USB device to the projectors Type A (flat) USB port.

If you connect a digital camera or USB storage device, you can use the projectors Slideshow feature. See the EasyMP Operation Guide on your projector CD.

For information on playing sound through the projector or connecting an external monitor, see the Users Guide on your projector CD.

Turn on your equipment 1 Turn on your computer or video source.

2 Plug in the projector.

3 Open the A/V Mute slide all the way.

4 Press the power button on the projector or remote control.

Power light

Power button

The power light flashes green, then stays on.

NOTE: To shut down the projector, press the power button twice, then unplug it. You dont have to wait for the projector to cool down.

Adjust the image 1 If you dont see an image, press the Source Search button on the

projector or the Search button on the remote control to select the image source.

NOTE: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet.

2 To raise the image, press the blue foot release button and lift the front of the projector. Release the button to lock the foot in position.

3 Turn the focus ring to sharpen the image. Turn the zoom ring to reduce or enlarge the image.

Zoom

Focus

4 If your image looks like or , youve placed the projector off to one side of the screen at an angle. Place it directly in front of the center of the screen, facing the screen squarely.

5 If your image looks like or , press the or buttons on the projector to correct it.

Using the remote control Make sure the batteries are installed as shown (two AA batteries).

Change presentation

slides (USB connection only)

Navigate projector

menus

Choose which source to display

Control projector volume

Turn projector on and off

Turn off projector display and sound

You can use the remote control to operate the projector. With the USB cable, you can use the remote as a wireless mouse. For more information on using the remote control, see your Users Guide.

PowerLite 85/825/826W

*411676200* *411676200*

DC-06 document camera

Digital camera

Thumb drive

Troubleshooting If you see a blank screen...

If you see a blank screen or the No signal message after turning on your computer, check the following:

Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open.

Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.

If youre using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it.

If the projector and notebook dont display the same image...

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.

If that doesnt work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1 From the Windows Control Panel, open the Display utility. In Windows Vista, right-click on the desktop and select Personalize, then select Display Settings.

2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings.

3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.

Mac OS X

1 From the Apple menu, select System Preferences, then select Display or Displays.

2 Click Detect Displays.

3 Make sure the VGA Display or Color LCD dialog box is selected.

4 Click Arrangement or Arrange, then make sure Mirror Displays is selected.

Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see Network Configuration.

1 Press the LAN button on the remote control.

2 Start EMP NS Connection on your computer.

Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection.

Mac OS X: Double-click the EMP NS Connection icon in your Applications folder.

3 Select Advanced Connection Mode and click OK.

4 Select the projector you want to connect to, then click Connect.

If you dont see the projector you want, click the Automatic search button.

5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When youre done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see Optional Accessories. For more information about using the projector on a network, see your Users Guide and EasyMP Operation Guide.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443

Network configuration If you need to configure the projector for your network, you can use the projectors menu system.

1 Press the Menu button on the remote control, select the Network menu, then press Enter.

2 Choose Network Configuration and press Enter.

3 Select the Wired LAN menu and press Enter.

4 Choose IP Settings and press Enter. You see a screen like the following:

5 Do one of the following:

If your network assigns addresses automatically, turn on the DHCP setting.

If your network does not assign addresses automatically, turn off DHCP and enter the projectors IP Address, Subnet Mask, and Gateway Address, as needed.

To enter numbers, use the buttons on the remote control to highlight the number you want to input, then press the Enter button. When youre finished entering an address in the network menu, highlight Return, then press the Enter button.

6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off.

7 When youre done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm.

8 Press the Menu button to exit the menu system.

Where to get help Manuals

For more information about using the projector, install the manuals from your projector CD.

Telephone Support Services

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Internet Support

Visit Epsons support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

Registration

Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.

Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Product Part number

Replacement lamp V13H010L50

Air filter replacement set (2 filters) V13H134A22

Image presentation camera (ELPDC05) V12H162020

DC-10s document camera ELPDC10S

DC-06 document camera V12H321001

Wireless LAN module V12H306P11

Quick Wireless Connection USB key V12H005M05

Troubleshooting If you see a blank screen...

If you see a blank screen or the No signal message after turning on your computer, check the following:

Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open.

Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.

If youre using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it.

If the projector and notebook dont display the same image...

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.

If that doesnt work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1 From the Windows Control Panel, open the Display utility. In Windows Vista, right-click on the desktop and select Personalize, then select Display Settings.

2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings.

3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.

Mac OS X

1 From the Apple menu, select System Preferences, then select Display or Displays.

2 Click Detect Displays.

3 Make sure the VGA Display or Color LCD dialog box is selected.

4 Click Arrangement or Arrange, then make sure Mirror Displays is selected.

Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see Network Configuration.

1 Press the LAN button on the remote control.

2 Start EMP NS Connection on your computer.

Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection.

Mac OS X: Double-click the EMP NS Connection icon in your Applications folder.

3 Select Advanced Connection Mode and click OK.

4 Select the projector you want to connect to, then click Connect.

If you dont see the projector you want, click the Automatic search button.

5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When youre done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see Optional Accessories. For more information about using the projector on a network, see your Users Guide and EasyMP Operation Guide.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443

Network configuration If you need to configure the projector for your network, you can use the projectors menu system.

1 Press the Menu button on the remote control, select the Network menu, then press Enter.

2 Choose Network Configuration and press Enter.

3 Select the Wired LAN menu and press Enter.

4 Choose IP Settings and press Enter. You see a screen like the following:

5 Do one of the following:

If your network assigns addresses automatically, turn on the DHCP setting.

If your network does not assign addresses automatically, turn off DHCP and enter the projectors IP Address, Subnet Mask, and Gateway Address, as needed.

To enter numbers, use the buttons on the remote control to highlight the number you want to input, then press the Enter button. When youre finished entering an address in the network menu, highlight Return, then press the Enter button.

6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off.

7 When youre done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm.

8 Press the Menu button to exit the menu system.

Where to get help Manuals

For more information about using the projector, install the manuals from your projector CD.

Telephone Support Services

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Internet Support

Visit Epsons support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

Registration

Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.

Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Product Part number

Replacement lamp V13H010L50

Air filter replacement set (2 filters) V13H134A22

Image presentation camera (ELPDC05) V12H162020

DC-10s document camera ELPDC10S

DC-06 document camera V12H321001

Wireless LAN module V12H306P11

Quick Wireless Connection USB key V12H005M05

Troubleshooting If you see a blank screen...

If you see a blank screen or the No signal message after turning on your computer, check the following:

Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open.

Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.

If youre using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it.

If the projector and notebook dont display the same image...

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.

If that doesnt work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1 From the Windows Control Panel, open the Display utility. In Windows Vista, right-click on the desktop and select Personalize, then select Display Settings.

2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings.

3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.

Mac OS X

1 From the Apple menu, select System Preferences, then select Display or Displays.

2 Click Detect Displays.

3 Make sure the VGA Display or Color LCD dialog box is selected.

4 Click Arrangement or Arrange, then make sure Mirror Displays is selected.

Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see Network Configuration.

1 Press the LAN button on the remote control.

2 Start EMP NS Connection on your computer.

Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection.

Mac OS X: Double-click the EMP NS Connection icon in your Applications folder.

3 Select Advanced Connection Mode and click OK.

4 Select the projector you want to connect to, then click Connect.

If you dont see the projector you want, click the Automatic search button.

5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When youre done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see Optional Accessories. For more information about using the projector on a network, see your Users Guide and EasyMP Operation Guide.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443

Network configuration If you need to configure the projector for your network, you can use the projectors menu system.

1 Press the Menu button on the remote control, select the Network menu, then press Enter.

2 Choose Network Configuration and press Enter.

3 Select the Wired LAN menu and press Enter.

4 Choose IP Settings and press Enter. You see a screen like the following:

5 Do one of the following:

If your network assigns addresses automatically, turn on the DHCP setting.

If your network does not assign addresses automatically, turn off DHCP and enter the projectors IP Address, Subnet Mask, and Gateway Address, as needed.

To enter numbers, use the buttons on the remote control to highlight the number you want to input, then press the Enter button. When youre finished entering an address in the network menu, highlight Return, then press the Enter button.

6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off.

7 When youre done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm.

8 Press the Menu button to exit the menu system.

Where to get help Manuals

For more information about using the projector, install the manuals from your projector CD.

Telephone Support Services

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Internet Support

Visit Epsons support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

Registration

Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.

Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Product Part number

Replacement lamp V13H010L50

Air filter replacement set (2 filters) V13H134A22

Image presentation camera (ELPDC05) V12H162020

DC-10s document camera ELPDC10S

DC-06 document camera V12H321001

Wireless LAN module V12H306P11

Quick Wireless Connection USB key V12H005M05

Troubleshooting If you see a blank screen...

If you see a blank screen or the No signal message after turning on your computer, check the following:

Make sure the power light on the projector is green and not flashing, and the A/V Mute slide is open.

Press the Source Search button on the projector or the Search button on the remote control to select the computer as the image source.

If youre using a Windows notebook, press the function key on your keyboard that lets you display on an external monitor. It may be labelled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it.

If the projector and notebook dont display the same image...

Windows

Try using the CRT/LCD or key as described above. On most systems, this key lets you toggle between the LCD screen and the projector, or display on both at the same time.

If that doesnt work, check your monitor settings to make sure both the LCD screen and the external monitor port are enabled.

1 From the Windows Control Panel, open the Display utility. In Windows Vista, right-click on the desktop and select Personalize, then select Display Settings.

2 Click Settings, then click Advanced. In Windows Vista, click Advanced Settings.

3 The method for adjusting the setting varies; you may have to click a Monitor tab, then make sure the external Monitor port is set as your primary display and/or enabled.

Mac OS X

1 From the Apple menu, select System Preferences, then select Display or Displays.

2 Click Detect Displays.

3 Make sure the VGA Display or Color LCD dialog box is selected.

4 Click Arrangement or Arrange, then make sure Mirror Displays is selected.

Project over the network Install EMP NS Connection on each computer that will project over the network. Use the CD labeled Epson Projector Software for Meeting & Monitoring to install EMP NS Connection. If you need to configure the projector for your network, see Network Configuration.

1 Press the LAN button on the remote control.

2 Start EMP NS Connection on your computer.

Windows: Select Start > Programs or All Programs > EPSON Projector > EMP NS Connection.

Mac OS X: Double-click the EMP NS Connection icon in your Applications folder.

3 Select Advanced Connection Mode and click OK.

4 Select the projector you want to connect to, then click Connect.

If you dont see the projector you want, click the Automatic search button.

5 If you see a message asking for a keyword, enter the four digits that appear on the LAN standby screen and click OK.

Your computer image is projected, with a floating toolbar:

When youre done presenting, click Disconnect on the toolbar.

NOTE: Using the optional Wireless LAN module, you can project wirelessly. To purchase the Wireless LAN module or other accessories, see Optional Accessories. For more information about using the projector on a network, see your Users Guide and EasyMP Operation Guide.

Epson is a registered trademark and Epson Exceed Your Vision is a registered logomark of Seiko Epson Corporation. PrivateLine is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

This information is subject to change without notice.

2009 Epson America, Inc. 2/09 Printed in XXXXXX CPD-27443

Network configuration If you need to configure the projector for your network, you can use the projectors menu system.

1 Press the Menu button on the remote control, select the Network menu, then press Enter.

2 Choose Network Configuration and press Enter.

3 Select the Wired LAN menu and press Enter.

4 Choose IP Settings and press Enter. You see a screen like the following:

5 Do one of the following:

If your network assigns addresses automatically, turn on the DHCP setting.

If your network does not assign addresses automatically, turn off DHCP and enter the projectors IP Address, Subnet Mask, and Gateway Address, as needed.

To enter numbers, use the buttons on the remote control to highlight the number you want to input, then press the Enter button. When youre finished entering an address in the network menu, highlight Return, then press the Enter button.

6 To prevent the IP address from appearing on the standby screen, set the IP Address Display setting to Off.

7 When youre done making all necessary changes, select Complete and press the Enter button to save your settings. Then press Enter again to confirm.

8 Press the Menu button to exit the menu system.

Where to get help Manuals

For more information about using the projector, install the manuals from your projector CD.

Telephone Support Services

To use the Epson PrivateLine Support service, call (800) 637-7661 and enter the PIN on the Epson PrivateLine Support card included with your projector. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:

U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday

Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday

Days and hours of support are subject to change without notice. Toll or long distance charges may apply.

Internet Support

Visit Epsons support website at epson.com/support and select your product for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.

Registration

Register today to get product updates, special promotions, and customer-only offers. You can use the registration card or CD included with your projector, or register online at www.epson.com/webreg.

Optional accessories You can purchase screens, carrying cases, or other accessories from an Epson authorized reseller. To find the nearest reseller, call 800-GO-EPSON (800-463-7766). Or you can purchase online at www.epsonstore.com (U.S. sales) or www.epson.ca (Canadian sales).

Product Part number

Replacement lamp V13H010L50

Air filter r

Manualsnet FAQs

If you want to find out how the PowerLite 85 Epson works, you can view and download the Epson PowerLite 85 Quick Setup on the Manualsnet website.

Yes, we have the Quick Setup for Epson PowerLite 85 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Setup should include all the details that are needed to use a Epson PowerLite 85. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson PowerLite 85 Quick Setup is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson PowerLite 85 Quick Setup consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson PowerLite 85 Quick Setup free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson PowerLite 85 Quick Setup, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson PowerLite 85 Quick Setup as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.