1 Rotate the focus ring to sharpen the image.
2 Rotate the zoom ring to reduce or enlarge the image. Turn to W (wide) to enlarge or T (tele) to reduce. (You can also move the projector closer to or farther from the screen.)
3 To raise the image, press the blue foot release levers inward and lift the front of the projector. Once the image is positioned where you want it, release the levers to lock the feet in position.
4 If your image looks like or , youve placed the projector off to one side of the screen, at an angle. Move it directly in front of the center of the screen, facing the screen squarely.
5 If your image looks like or , the Auto Keystone correction feature has been disabled. You can manually adjust the keystone correction value by pressing the or side of the Keystone button on the projector. Or, to enable Auto Keystone correction, refer to your Users Guide.
If you see a blank screen or the No signal message after turning on your laptop, check the following:
Make sure the power light is green and not flashing and the lens cover is off.
Try turning off the laptop and restarting it.
If youve connected more than one computer and/or video source, you may need to press the Source button on top of the projector. (Allow a few seconds for the projector to sync up after pressing it.)
If youre using a Windows laptop:
Hold down the Fn button and press the function key that lets you display on an external monitor. It may have an icon such as , or it may be labelled CRT/LCD. Allow a few seconds for the projector to sync up after pressing it.
On most systems, the key lets you toggle between the LCD screen and the projector, or display on both at the same time.
You might need to use the Display utility in the Control Panel to enable both the LCD screen and external monitor port. Check your laptops manual or online help for details.
If youre using a Macintosh:
1. From the Apple menu, select Control Panels, then click Monitors or Monitors and Sound.
2. Click the Arrange icon.
3. Drag one monitor icon on top of the other. This lets you display on the projector screen as well as the LCD screen.
If the Arrange option isnt available, you may need to select one of the Simulscan resolution settings:
4. Click the Monitor icon.
5. Select a Simulscan resolution as shown. (Allow a few seconds for the projector to sync up after making the selection.)
If you see a blank screen
EPSON is a registered trademark of SEIKO EPSON CORPORATION. PowerLite and PrivateLine are registered trademarks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright 2002 by Epson America, Inc. Printed in Japan. 5/02
Drag one monitor icon on top of the other
Click here
Select a Simulscan resolution
Click here
No signal ( ? Help)
Quick Setup EPSON PowerLite 720c/730c
CPD-13916R1
Adjust the image
Focus adjustment
Image size adjustment
Note: If you see a blank screen after focusing, see the instructions to the right.
No signal ( ? Help)
Where to get help Telephone Support Services To use the EPSON PrivateLine Support service, call (800) 637-7661 and enter the PIN on the EPSON PrivateLine Support card included in your owners kit. This service is available 6 AM to 6 PM, Pacific Time, Monday through Friday, for the duration of your warranty period. You may also speak with a projector support specialist by dialing one of these numbers:
U.S.: (562) 276-4394, 6 AM to 6 PM, Pacific Time, Monday through Friday
Canada: (905) 709-3839, 6 AM to 6 PM, Pacific Time, Monday through Friday
Toll or long distance charges may apply.
Electronic Support Services EPSON provides technical assistance through electronic support s