Contents

Epson ELPMBATA Installation Manual PDF

1 of 11
1 of 11

Summary of Content for Epson ELPMBATA Installation Manual PDF

INSTALLATION MANUAL High Security Projector Ceiling Mount

MODEL# ELPMBATA

Manufactured by: Business Machine Security, Inc. 520 W. Central Ave. Brea, CA 92821 www.LocDown.com

INSTALLATION MANUAL 2

Table of Contents

Limited Warranty Information....................................................................................... 3

Contact Business Machine Security............................................................................. 3

Warning Statement........................................................................................................ 3

Parts List.........................................................................................................................4

Mount Assembly............................................................................................................. 5

Securing Receiver Tray to Pipe..................................................................................... 6

Mounting Projector to Grid Plate............................................................................ 7-9

Locking Grid Plate to Receiver Tray...........................................................................10

Adjusting Mount........................................................................................................... 11

INSTALLATION MANUAL 3

Business Machine Security Limited Warranty Information

Business Machine Security, Inc. warrants the original purchaser of Business Machine Security, Inc. products that they be free of defects in

material and workmanship for life from the date of purchase. User assumes all risk and liability resulting from the use of the products, whether

used singly or in combination with other goods. Business Machine Security, Inc. neither assumes nor authorizes any person to assume for it any

liability in connection with the sale or use of the products sold and there are no oral agreements or warranties collateral to or affecting this limited

warranty. Business Machine Security, Inc.s only responsibility under this warranty is for the repair or replacement of any Business Machine

Security, Inc. product found to be defective during the warranty period. Business Machine Security, Inc. assumes no responsibility whatsoever

for special, indirect or consequential damages resulting from the use of Business Machine Security, Inc. products, and specifically assumes no

liability for the loss or damage to equipment or data. The remedies set forth in this Limited Warranty are exclusive and the liability of Business

Machine Security, Inc. with respect to any contract of sale or anything done in connection therewith, whether in contract, in tort, under any

warranty or otherwise shall not, except as expressly provided herein, exceed the price of the equipment or part on which such liability is based.

Any damage caused by the improper use, operation beyond capacity, substitution of parts or equipment not approved by Business Machine

Security, Inc., improper packaging, failure to observe installation or other instructions, transit, or repair by one other than Business Machine

Security, Inc., will not be covered by and shall void this Limited Warranty.

THIS IS THE ONLY WARRANTY GIVEN, AND EXCLUDES ALL OTHER WARRANTIES, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.

Contact Business Machine Security Customer Service/ Technical Support at (800) 872-9562 or customerservice@locdown.com

Important Warnings and Cautions!

Warning Failure to read, understand, and follow instructions can result in serious personal injury, damage to equipment, or voiding equipment warranty.

Warning Improper installation can result in serious personal injury or death. The mounting surface must support a weight factor of four times the combined total weight of the equipment and the mount. If not, reinforcement of the mounting surface will be necessary before installing the mount.

Warning It is the installers responsibility to make sure the mounting surface can support the combined weight of the mount and equipment by a factor of four times.

Warning It is the installers responsibility to make sure that mounting surface and subsurface is free and clear of all electrical wires, plumbing and gas pipes. Failure to provide adequate clearance of all electrical wires and pipes can result in fire, serious personal injury or death.

Warning Mount and equipment exceeding a combined weight of 60 lbs. can result in damage to the support structure, the mount, the equipment, and may cause serious personal injury.

Warning Business Machine Security, Inc. does not warrant its mounts against damage caused by the use of its mounts for any purpose other than for the purposes for which it has been designed. Business Machine Security, Inc. is not responsible for damage, or injury that may result in the use of any unauthorized modifications or attachment.

Warning Proper safety gear and practices should be adhered to at all times throughout the installation process.

Warning Do not install the mount near any heat source or air conditioning vent which may be prone to vibration.

Warning Maximum load capacity of mount: 25 lb

Warning When installing or adjusting the ceiling mount, do not use adhesives, lubricants, or oils to prevent the screws from loosening. If you use adhesives, lubricants, or oils to prevent the screws from loosening, the casing may crack and the projector may fall, causing serious injury and damage to the projector.

INSTALLATION MANUAL 4

Parts List Installation Tools

Mounting Hardware

Phillips Head Screwdriver (not provided)

4mm X 10mm Pan Head Metric Screw

(Qty 4) 4mm X 20mm Pan Head Metric Screw

(Qty 4)

Pipe Adhesive (provided)

#10 SAE Flat Washer (Qty 4) 3/8 Thick

Spacer (Qty 4)

INSTALLATION MANUAL 5

Mount Assembly

PARTS LEGEND A 1-1/2 Threaded Pipe (Not provided)

B Pipe Adhesive

C 1-1/2 Pipe Coupler

D Tensioning Ring

E Receiver Tray

F Grid Plate

G Pan Head Metric Screw*

4mm X 10mm

4mm X 20mm

H #10 SAE Flat Washer

I Screw Lock

J 3/8 Spacer

P Projector (Not included)

GRID PLATE TO RECEIVER TRAY

*see pages 7-9 for proper hardware to use for your model projector

INSTALLATION MANUAL 6

Securing Receiver Tray to Pipe

Twist off the cap from the Pipe Thread Adhesive tube (B). Cut off the tip. Apply it to the inside of the

coupler (C) at the top, for about 1/4 or approximately three threads. Screw the coupler (C) clockwise

(as viewed from below), with the Receiver Tray (E) already assembled, onto the pre-installed 1-1/2

standard pipe threads (A). This connection should be as tight and stable as possible.

WARNING: It is the installers responsibility to be sure that the structure to which this mount will be attached, can support four times the combined weight of the equipment, mount and supporting hardware.

(not provided)

INSTALLATION MANUAL 7

Mounting Projector to Grid Plate

Soft Cloth or Packaging Material

1. Turn the projector (P) upside down and place it flat on a soft cloth or packaging material. Remove or adjust the feet to be as flush as possible to the projector bottom.

2. Place the Grid Plate (F) on the bottom of the projector and line it up so the mounting inserts of the projector (P) can be seen through the holes of the Grid Plate (F). (NOTE: see pages 8-9 for which mounting holes to use for your model projector)

3. Select the screws (G) for your projector (see pages 8-9 for proper hardware to use for your model projector)

4. Attach the Grid Plate (F) to the projector using these screws (G) and washers (H). Turn until snug. Do not over tighten.

NOTE: The 400W need 3/8 Spacers

(J) to level the Grid Plate (F). Place the

Spacers (J) over the mounting inserts

and then place the Grid Plate (F) on

top of the Spacers (J) lining up the

proper holes of the Grid Plate (F) with

the projectors (P) mounting inserts.

INSTALLATION MANUAL 8

Mounting Inserts:

#10 SAE Flat Washers (Qty 3) 4mm X 10mm Pan Head Metric Screws (Qty 3)

HARDWARE

Epson Projector Model# 1700c, 1705c, 1710c, 1715c

Mounting Inserts

Grid Plate Alignment

Epson Projector Model# S5, 77c, 83+, 822+, 400W

Mounting Inserts Grid Plate Alignment

Mounting Inserts: #10 SAE Flat Washers (Qty 3) 4mm X 10mm Pan Head Metric Screws (Qty 3) 4mm X 20mm Pan Head Metric Screws (Qty 3) (400W model only) 3/8 Spacers (Qty 3) (400w model only)

HARDWARE

INSTALLATION MANUAL 9

Epson Projector Model# 6110i

Mounting Inserts Grid Plate Alignment

Mounting Inserts:

#10 SAE Flat Washers (Qty 4) 4mm X 10mm Pan Head Metric Screws (Qty 4)

HARDWARE NOTE: For updated information on

compatibility with the latest Epson

projector models, visit www.epson.com

INSTALLATION MANUAL 10

Locking Grid Plate to Receiver Tray 1. After the Receiver Tray (E) has been attached to the ceiling and the projector has been attached to the Grid Plate (F), slide the Grid Plate (F) into the Receiver Tray (E).

Before completely closing the mount, route the cables that are running down the 1-1/2 Pipe (A) and out the center of the Receiver Tray (E). (See figure 6)

Slide the Grid Plate (F) in while guiding the cables into a slot located in the back of the Grid Plate (F). (See figure 7)

2. Put the Screw Lock (I) into the Grid Plate (F) and turn clockwise until it is snug. WARNING: DO NOT OVER TIGHTEN THE LOCK.

CABLE SLOT

figure 6

figure 7

INSTALLATION MANUAL 11

Adjusting Mount 1. To align the projector, simply grab a hold of either side of the mount and gently adjust by lifting up and pushing down until you have the proper registration. If you wish to add or lessen the tension, turn the Tension Ring until the desired amount has been achieved. The Tension Ring can be turned to lock in the registration once the installation is complete.

All other brand and product names are trademarks or registered trademarks of their respected owners.

TENSION RING

Tighten to Lock

Gently Adjust

Manualsnet FAQs

If you want to find out how the ELPMBATA Epson works, you can view and download the Epson ELPMBATA Installation Manual on the Manualsnet website.

Yes, we have the Installation Manual for Epson ELPMBATA as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Manual should include all the details that are needed to use a Epson ELPMBATA. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson ELPMBATA Installation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson ELPMBATA Installation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson ELPMBATA Installation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson ELPMBATA Installation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson ELPMBATA Installation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.