Epson ELPMBPRG Installation Manual PDF

1 of 11
1 of 11

Summary of Content for Epson ELPMBPRG Installation Manual PDF

Installation and Assembly:

Model: ELPMBPRG, ELPMBPRG-B

2300 White Oak Circle Aurora, Il 60502 (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com Manufactured by Peerless Industries, Inc.

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Max UL Load Capacity: 50 lb (22.7 kg)

ADVANCED PROJECTOR CEILING MOUNT WITH PRECISION GEAR

Compatible with: ENG ELPMBC01 ELPMBP01 ELPMBP02 ELPMBP03

2 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

NOTE: Read entire instruction sheet before you start installation and assembly.

Table of Contents Parts List.................................................................................................................................................................................3 Installation to Extension Column ............................................................................................................................................4 Installation To Wood Joist Ceilings .........................................................................................................................................5 Installation to Concrete Ceilings .............................................................................................................................................6 Installing Plates to Projector ..................................................................................................................................................7 Installing Connection Block to Projector Mount Assembly......................................................................................................9 Cable Management ............................................................................................................................................................. 10 Projector Alignment ..............................................................................................................................................................11 Accessories and Warranty Information ................................................................................................................................ 12

Tools Needed for Assembly studfinder("edgetoedge"studfinderisrecommended) phillips screwdriver drill 5/16"bitforconcretesurface 5/32"bitforwoodjoist 3/8"(10mm)socketwrench

Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, call Peerless customer care at 1-800-865-2112.

This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.

Make sure that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Never exceed the Maximum UL Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. Tightenscrewsfirmly,butdonotovertighten.Overtighteningcandamagetheitems,greatlyreducingtheirholding

power. See suggested torque values where applicable within these instructions. This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal

injury.

WARNING

3 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

NOTE: Actual parts may appear slightly different than illustrated.

Before you start check the parts list to ensure all of the parts shown are included.

D

L

M

F G I

J K

B C

A

H

N

E

Parts List ELPMBPRG Part #

ELPMBPRG-B Part #Description Qty

A projector mount assembly 1 580-2300 580-1300 B adapter plate 1 056-2065 056-1065 C dedicated adapter plate 1 055-2871 055-1871 D M4 x 20 mm socket pin serrated washer head screw 4 510-2163 510-1061 E #10-32x3/8"socketpinserratedwasherheadscrew 2 520-2151 520-1151 F 3/8"spacer 4 590-2150 590-1150 G M4 x 6 mm socket pin serrated washer head screw 6 510-2059 510-1059 H concrete anchor 2 590-0320 590-0320 I 10-32x1/4"socketpinscrewwithlock 1 520-2196 520-1196 J 4 mm security allen wrench 1 560-9646 560-9646 K washer 2 540-2078 540-1078 L #14x2.5"woodscrew 2 5S1-015-C04 5S1-015-C03 M 2 mm security allen wrench 1 560-1097 560-1097 N #10flatwasher 4 540-9442 540-9400

4 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

NOTE: Refer to accompanying instructions for ELPMBP01, ELPMBP02, ELPMBP03 or CMJ and ACC Series Ceiling Mounts (sold separately) for installing these models to ceiling. Screw projector mount assembly (A)ontoextensioncolumnasshowninfigure1.1. Use 4 mm allen wrench (J) to tighten swivel stop screw. NOTE: Swivelstopscrewisusedtojamagainstthreadsofextensioncolumnorflushmounttubetopreventany excess movement of projector mount assembly (A) as shown in detail 1. Do not overtighten screw; overtightening screwwilldamagethreadsmakingitdifficulttoseparateproducts. Skip to step 2.

1

Installation to Extension Column

SWIVEL STOP SCREW

DETAIL 1

A

fig. 1.1

A

EXTENSION COLUMN (UL Listed ELPMBC01 or UL Listed

EXT and ADJ Series) (Sold Separately)

Not Shown: UL Listed ELPMBP01, ELPMBP02, ELPMBP03or UL Listed CMJ and ACC Series Ceiling Mounts (Sold Separately).

5 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Place projector mount assembly (A) on ceiling as a template and mark the center of the two mounting holes. Make surethatthemountingholesareinthecenterofthewoodjoist.Drilltwo5/32"(4mm)dia.holestoaminimum depthof2.5"(64mm).Attachprojectormountassembly(A)withtwo#14x2.5"(6mmx65mm)woodscrews(L) andtwoflatwashers(K)asshowninfigure1.3orfigure1.4dependingonjoistorientation. NOTE: Mounting slots on projector mount assembly allow for 30 (15) of swivel adjustment before fully securing wood screws. Tighten wood screws (L)using3/8"(10mm)socketoropenendwrenchorphillipsscrewdriveruntilprojector mount assembly (A)isfirmlyattached. Skip to step 2.

1

Installation To Wood Joist Ceilings

Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components.

Tightenwoodscrewssothatprojectormountassemblyisfirmlyattached,butdonotovertighten.Overtightening can damage the screws, greatly reducing their holding power.

Never tighten in excess of 80 in. lb (9 N.M.). Makesurethatmountingscrewsareanchoredintothecenterofthestud.Theuseofan"edgetoedge"studfinder

is highly recommended. Hardwareprovidedisforattachmentofmountthrough5/8"thicknessdrywallorplasterintowoodstuds.

WARNING

L L

A

WOOD JOIST

K K

WOOD JOIST

A

fig. 1.3 fig. 1.4

6 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Place projector mount assembly (A) on ceiling as a template and mark the center of the two mounting holes.Drilltwo5/16"(8mm)dia.holestoaminimum depthof2.5"(64mm).Attachprojectormount assembly (A) using two concrete anchors (H), two flatwashers(K),andtwo#14x2.5"woodscrews(L) as shown in Illustration A and 1, 2 and 3). NOTE: Mounting slots on projector mount assembly allow for 30 (15) of swivel adjustment before fully securing wood screws. Tighten wood screws (L)using3/8"(10mm)socket or open end wrench or phillips screwdriver until projector mount assembly (A)isfirmlyattached.

Installation to Concrete Ceilings

1

Illustration A

H

L

K A

CONCRETE CEILING

C U

TA W

AY V

IE W

A CORRECT

plaster/ dry wall

concrete

INCORRECT

plaster/ dry wall

concrete

A

Always attach concrete anchors directly to load- bearing concrete.

Never attach concrete anchors to concrete covered withplaster,drywall,orotherfinishingmaterial.

WARNING

Tightenwoodscrewsfirmly,butdonotovertighten. Overtightening can damage the screws, greatly reducing their holding power.

Never tighten in excess of 80 in lb (9 N.M.).

WARNING

1

3

H Drill holes and insert anchors (H).

Place plate (A) over anchors (H) and secure with screws (L).

Tighten all fasteners.

2

H

A

L K

concrete surface

Neverattachconcreteexpansionanchorstoconcretecoveredwithplaster,drywall,orotherfinishingmaterial.

WARNING

7 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

2

Installing Plates to Projector

Attach adapter plate (B) to dedicated adapter plate (C) using six M4 x 6 mm socket pin screws (G).

G

B

C

2

All spacers shall be used where indicated. Not using spacers can cause damage to projector. It is the responsibility of the installer to ensure that the projector is properly ventilated.

CAUTION

NOTE: For all PowerLite models, the manufacturer's product weight must be reviewed to ensure that the weight does not exceed 50 lbs.

B

Adapter Plate: PowerLite 92, 93, 95, 96W, 905, 915W, 1835, 410W, 1750, 1760W, 1770W, 1775W, 1830, 1915, 1925W, S17, X17, W17, 97, 98, 99W, 955W, 965

2-Plate Horizontal Configuration: PowerLite Pro G5450WNL, G5200WNL, G5650WNL, G5350NL, G5150NL, G5550NL, G5750WNL, G5950NL G5000, 4100, 4200W, 4300, 6110i

Use adapter plate (B) as shown.

8 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

B. PowerLite 6110i

Hole Patterns A. PowerLite 92, 93, 95, 96W, 905, 915W, 1835, 410W, 1830, 1915, 1925W, S17, X17, W17, 97, 98, 99W, 955W, 965

FRONT FRONT FRONT

D. PowerLite 1750, 1760W, 1770W, 1775W FRONT

Attach adapter plate (B) to projector using the three M4 x 20 mm socket pin serrated washer head screws (D) and spacers (F), andone#10flatwasher(N).

NOTE: Retaining spacers go between adapter plate and projector.

D

N

B FRONT

C. PowerLite Pro G5450WNL, G5200WNL, G5650WNL, G5350NL, G5150NL, G5550NL, G5750WNL, G5950NL G5000, 4100, 4200W, 4300,

CD

2

NOTE: SHOULDER INDICATES THE BACK OF ADAPTER PLATE (B)

FRONT

NOTE: Shoulder indicates back of adapter plate (B) Flip projector upside down. Find your projector model from the hole patterns listed below. Using the holes indicated on the corresponding hole pattern diagram, attach adapter plate (B) to projector using the appropriate number of M4 x 20 mm socket pin serrated washer head screws (D),#10flatwashers(N), and spacers (F).

NOTE: Retaining spacers go between adapter plate and projector.

F

B

N

9 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Slide connection block with projector into projector mount assembly (A) as shown. Tighten captive screw to secure projector to projector mount assembly (A).

IMPORTANT:Forsecurityinstallations,insertone#10-32x1/4"socketpinscrew(I) through projector mount assembly (A) and into connection block as shown.

3

Always use an assistant or mechanical lifting equipment to safely lift and position the projector.

WARNING Installing Connection Block to Projector Mount Assembly

4

CONNECTION BLOCK

A

CAPTIVE SCREW

I

10 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

To adjust yaw (swivel) for extension column installation: Loosen screw on projector mount assembly (A) indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw. To adjust pitch (forward and backward tilt): Turn knob on back of mount as shown below. Pull knob out and turn by hand for easy adjustment. To adjust roll (side to side tilt): Turn knob on side of mount as shown below. Pull knob out and turn by hand for easy adjustment.

5

Projector Alignment

+/- 10

3/8" (10mm)

Loosen screw, make adjustment, retighten screw.

4mm wrench

+15 -20

+/- 5

4mm wrench4mm wrench Loosen screw, make adjustment, retighten screw. Loosen screw, make adjustment, retighten screw.

11 of 11 Visit the Peerless Web Site at www.peerless-av.com For Technical Support Contact Peerless Mounts at 1-800-865-2112

ISSUED: 04-01-08 SHEET #: 055-9254-19 02-28-14

Cable Management To make an opening to route cables through projector mount assembly, adjust projector mount assembly to full upward tilt position and maximum left or right roll position by turning knobs for adjustments as shown in step 5. Route cables through top of extension column as shown. NOTE: A method for assisting cables through extension column may be required (example: string tied to connector to help pull through extension column). Route cables through projector mount assembly as shown and connect to projector.

MAXIMUM WIDTH 1-9/16" (40 mm)

HEIGHT DIMENSION WILL VARY DEPENDING ON WIDTH DIMENSION

DO NOT CRIMP WIRES

BEND WIRES OF RCA PLUGS IN OPPOSITE DIRECTION

MAXIMUM DIMENSIONS EXTENSION COLUMN

WILL ALLOW

ROUTE CONNECTOR THROUGH FIRST

fig. 6.1 CA

Manualsnet FAQs

If you want to find out how the ELPMBPRG Epson works, you can view and download the Epson ELPMBPRG Installation Manual on the Manualsnet website.

Yes, we have the Installation Manual for Epson ELPMBPRG as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Manual should include all the details that are needed to use a Epson ELPMBPRG. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson ELPMBPRG Installation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson ELPMBPRG Installation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson ELPMBPRG Installation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson ELPMBPRG Installation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson ELPMBPRG Installation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.