Contents

Epson ELPCB02 Operation Guide PDF

1 of 3
1 of 3

Summary of Content for Epson ELPCB02 Operation Guide PDF

Connection & Control Box Operation Guide

1

How To Switch Input Sources

1 2 3

Part Names and Functions

Connect devices Change sources Projection starts

Temporarily interrupts video and audio output from the projector or speakers, except for the [Mic] port and the [AUX In] port.

Turns the projector power on or off.

Configures the audio output from the speakers when they are connected to this product. Do not change this switch because the setting was done optimally at installation.

Temporarily mutes audio signals from the [Mic] port and the [AUX In] port. While audio is muted, the indicator of the mute button turns green.

Indicates the status of the Connection & Control Box. (This does not indicate the status of the projector. )

Operating normally.

In standby. Press any button to resume.

An error has occurred. Unplug the Connection & Control Box, and contact your dealer.

Connects the projector to this device. See the Installation Manual for more details.

Input Ports

When using a commercially available dynamic microphone, connect to the [Mic] port. Plug-in power is not supported. When inputting audio from a portable audio player and such, connect the audio cable to

[AUX In] port. The audio input from [AUX In] port is always played regardless of the selected source. When connecting a recording device, connect the audio cable to [REC Out] port. The audio input from the audio input ports, the Aux In, and the Mic port is output. Audio is output in a constant level and cannot be adjusted.

[Computer1] input port [Computer2] input port

[A/V Mute] button

[Projector] button

Input source buttons

Input interface cover

Operation indicator

Output ports

[Audio Mute] button

Dip switch

[Volume] dial Power switch

[HDMI1/MHL] port

[HDMI2] port

[USB-A] port

[Mic] port (6.3 mm stereo jack)/

[Audio1] port [Audio2] port [AUX In] port [REC Out] port

[Audio-L/R] port (RCA jack)

[Video] input port (RCA jack)

[USB-B] port

[S-Video] input port (Mini DIN 4-pin jack) Blue

Orange

Blue

(3.5 mm stereo mini jack) We recommend using a shielded cable.

[Volume] dial (mic input)

(Mini D-Sub 15-pin (female))

Connect cables according to your devices to use.

HDMI

MHL

2

Connection Examples

When the projector only has one HDMI port, make sure you connect the HDMI cable to the [HDMI1/MHL] port. You may not be able to connect an MHL cable to all devices. Also, depending on the model or settings of the device, images may not be projected correctly. When connecting an MHL cable, make sure the cable meets the MHL standards. If the cable does not meet the MHL standard, the connected device may malfunction. If you connect using a commercially available MHL-HDMI conversion adapter, you may not be able to charge the connected device or you may not be able to perform operations from the projector's remote control. If images are not projected correctly using an MHL cable, disconnect and then reconnect the MHL cable. If you switch the HDMI1/MHL source and the HDMI2 source while playing a movie, the movie may freeze. Stop the movie before switching sources.

Connect the ports in either of the following combinations. When using [Computer1] input port [Audio1] port When using [Computer2] input port [Audio2] port

For projectors which audio can be input with the USB cable in the USB Display function, there is no need to connect the audio cable. Be sure to connect the projector and the computer directly, not via a USB hub.

Connecting with HDMI Cables

If you use a thick HDMI cable, it may disconnect under its own weight. Use the HDMI cable clamp to secure the cable.

Connecting Using a Computer Cable

Connecting Using a USB Cable

If you output audio

If you output audio

3

Switching Images

Input Source Button Image Input Audio Input Computer1 Computer1 Audio1 HDMI1/MHL HDMI1/MHL HDMI1/MHL USB USB Display USB-A USB Display/Audio2*

Computer2 Computer2 Audio2 S-Video S-Video Audio-L/R Video Video Audio-L/R HDMI2 HDMI2 HDMI2 LAN LAN LAN/Audio2*

Names and Functions of the Input Source Buttons

Press the Input Source buttons to input images and audio from the device connected to the port as shown in the following table. Switching sources may take a while.

* If the projector supports audio transfer using USB display or over a network, audio is input through USB Display or LAN. When you use a projector that does not support audio transfer, [Audio 2] is input.

Troubleshooting

No images appear Did you turn on the connected device? Turn on the power of the connected device.

Did you turn on the projector? Press the [Projector] button.

Did you press the correct Input Source button for the connected device you want to play?

When no specific input source is selected, [Computer1] button is automatically selected and images from the [Computer1] input port are displayed. Press the correct Input Source button corresponding to the connected device.

Did you press the [A/V Mute] button? Press the [A/V Mute] button again.

Is the operation indicator light on ?

If no operations are made on the Connection & Control Box for eight hours, it enters standby status. Press any button and the indicator turns to , press the Input Source button.

The source can not be switched Did you press the correct Input Source button corresponding to the connected device?

Press the correct Input Source button.

Is the Message Broadcasting dialog displayed?

Press the [Projector] button and restart the projector.

The Connection & Control Box is not operating Is the power of this product on? Turn on the power switch.

Is the power cable plugged? Plug in the power cable of the Connection & Control Box.

Is the operation indicator flashing ?

Unplug the power cable of the Connection & Control Box, and contact your dealer.

No sound comes out or the sound is faint Is the projector's audio input setting correct?

Check that the projector's "A/V Settings" or "Audio Input" are correct. Projector's user's guide

Did you turn down the audio volume of the projector or speakers too much?

Turn up the volume with the [Volume] dial. Projector's or Speakers' user's guide.

Is the projector's "MIC Input Level" appropriate?

Adjust the input level of the microphone.

Is the audio cable of the connected device correctly connected?

Check the connection of the audio cable. This manual "Input Ports", Connection & Control Box Installation Manual "Connecting to the Speaker"

Is there a cable connected to the projector's audio output port?

If a cable is conn

Manualsnet FAQs

If you want to find out how the ELPCB02 Epson works, you can view and download the Epson ELPCB02 Operation Guide on the Manualsnet website.

Yes, we have the Operation Guide for Epson ELPCB02 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation Guide should include all the details that are needed to use a Epson ELPCB02. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Epson ELPCB02 Operation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Epson ELPCB02 Operation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Epson ELPCB02 Operation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Epson ELPCB02 Operation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson ELPCB02 Operation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.