Epson ELPDC12 User's Guide PDF
en
Summary of Content for Epson ELPDC12 User's Guide PDF
Document Camera User's Guide
Important Safety Instructions Read this User's Guide and follow all safety instructions for your document camera. Keep this guide at hand for future reference.
Warning This symbol indicates information that, if ignored, could possibly result in personal injury or even death due to incorrect handling.
Caution This symbol indicates information that, if ignored, could possibly result in personal injury or physical damage due to incorrect handling.
Environmental Precautions
Warning Do not leave the document camera or the remote control with batteries inside a vehicle with the windows closed, in places where they will be exposed to direct sunlight, or in other places that may become extremely hot. Thermal damage, fire, or malfunction may occur. Do not use or store the document camera outdoors for an extended length of time, or where it may be exposed to rain, water, or excessive humidity. Fire or electric shock may result. Do not use the document camera in places where smoke from cigarettes may be present, where it will be exposed to greasy smoke, humidity, or steam (such as cooking areas or near humidifiers), or where there is a lot of heat or dust. This can adversely affect the quality of the projected images.
Caution Do not set up the document camera near high-voltage electrical wires or sources of magnetic fields. This may interfere with correct operation.
Operate in the proper environmental conditions. s p.80
Do not place or store the unit where it is accessible to small children. The unit may drop or tip over, causing personal injury.
Do not place the document camera where it will be subject to a lot of vibration or shock.
Electrical Precautions
Warning Never open any covers on the document camera except as specifically explained in this User's Guide. Never attempt to disassemble or modify the document camera. Refer all repairs to qualified service technicians. Unplug the document camera from the outlet and refer all repairs to qualified service technicians under the following conditions: If smoke, strange odors, or strange noises come from the device If liquid or foreign objects get inside the device If the device has been dropped or the housing has been damaged Continuing to use under these conditions may result in fire or electric shock. Do not attempt to use any adapter other than the AC adapter and power cord included with the device. Using an improper adapter may cause damage, overheating, fire, or electric shock. Be sure to use the AC adapter with the proper voltage indicated in this guide. Use of a different power source may result in fire or electric shock. If the AC adapter, power cord, or document camera is damaged, turn the power off, unplug the AC adapter from the electrical outlet, and contact your local distributor. Using the damaged device may cause fire or electric shock. Do not touch the device, the AC adapter, or the plug with wet hands. This may cause electric shock. Do not use the power cable that is damaged. Fire or electric shock may result. Do not modify the power cable. Do not place heavy objects on top of the power cable. Do not bend, twist or pull the power cable excessively. Keep the power cable away from hot electrical appliances. Take the following precautions when handling the plug. Failure to comply with these precautions could result in fire or electric shock. Do not overload wall outlets, extension cables, or power strips. Do not insert the plug into a dusty outlet. Insert the plug firmly into the outlet. Do not pull the power cable when disconnecting the plug; always be sure to hold the plug when disconnecting it. Do not touch the plug during an electrical storm. Otherwise, you may receive an electric shock.
Caution Turn off the document camera and unplug it after use. Make sure the power is turned off, the plug is disconnected from the outlet, and all cables are disconnected before moving the document camera.
Installation Precautions
Warning If you apply adhesives to prevent the screws from loosening, or if you use lubricants or oils on the document camera, the document camera housing may crack. This could cause serious injury. Do not use adhesives to prevent the screws from loosening and do not use oils or lubricants.
Caution Do not place the document camera in an unstable location, such as on a shaky table or slanted surface. The document camera may drop or tip over, causing personal injury. If you use a table, cart, or stand, make sure it is stable and will not fall over. When using the mounting points under the document camera to secure it to a table, cart, or stand, fasten the bolts securely but do not overtighten them. Do not use adhesives. Do not place the document camera in a poorly ventilated place where heat can accumulate. Do not place the document camera on a carpet, blanket, etc. or cover it during use.
Cleaning Precautions
Warning Use a dry cloth (or, for stubborn stains, a moist cloth that has been wrung dry) for cleaning. Do not use liquid, aerosol cleaners, or solvents such as alcohol, thinner or benzine. Do not place any containers of liquid on top of or near the unit. Do not spill liquid or spray fine mist into the document camera. Liquids entering the document camera may cause malfunction, fire, or electric shock. If you spilled liquid, turn the power off, unplug the AC adapter from the electrical outlet, and contact your local distributor. Using the damaged device may cause fire or electric shock. Do not insert or drop metal, flammable, or foreign objects into the document camera's vents or openings nor leave them nearby. Doing so may result in fire, electric shock, or burns.
Caution Unplug the AC adapter from the outlet before cleaning to prevent electric shock.
Usage Precautions
Caution Do not look into the lens when the LED illumination lamp is on. The bright light can damage your eyes. Do not use excessive force when adjusting the document camera. The document camera may be broken, resulting in personal injury. Do not place heavy objects on document camera, or it may be damaged. Do not try to press the arm flat or fold it backwards, or it may get damaged.
Battery Precautions
Warning Incorrect battery usage may cause batteries to rupture and leak battery fluid, which could result in fire, injury, or corrosion of the remote control. If liquid from a battery gets in your eyes, do not rub your eyes. Wash them well with clean water and contact a doctor immediately. If liquid enters your mouth, rinse immediately with plenty of water and consult a doctor. If liquid from the battery comes in contact with your skin or clothes, wash with water to prevent possible skin damage. Keep batteries out of the reach of children. Batteries are a choking hazard and are very dangerous if swallowed. Prepare two replacement manganese or alkaline AA batteries. Do not use any other kinds of batteries. Insert batteries so that the polarities (+ and -) are correct. Not doing so may cause leakage, overheating, or explosion. Do not use a new battery and an old battery, or different types of batteries at the same time. Doing so may cause leakage, overheating, or explosion. Remove the batteries if you will not be using the remote control for a long period of time. When a battery runs down, take it out of the remote control immediately. If a discharged battery is left inside for a long time, gas emitted from the battery may cause leakage, overheating, explosion, or damage to the remote control. Do not heat batteries or put them into fire or water. When you throw away the batteries, follow your areas regulations regarding disposal or recycling.
Memory Card Precautions
Caution We recommend backing up data on the document camera's internal memory, your USB drive, or SD card to another media. Data may be lost or damaged under the following conditions. If the power cable is disconnected from the document camera while recording or exporting data If the SD card or USB drive is removed from the document camera while recording or exporting data If it is subjected to static electricity or electrical noise If it is used incorrectly If a malfunction occurs or if the device needs to be repaired If damage occurs due to a natural disaster In addition to the situations mentioned above, Epson shall not be responsible for the loss of any data or damage to data even during a warranty period.
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . 2
Introduction
Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Included Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Document Camera Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Top/Side/Rear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Camera Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Remote Control Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Projector operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Document camera operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Storing the Document Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Securing the Document Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Connecting
Connecting to a Projector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Connecting to a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 Connect for Use with the Document Camera Software . . . . . . . . . . . . . . . . . . . . 22 Connect for Use Without the Document Camera Software . . . . . . . . . . . . . . . . . . 23
Projecting
Plugging In and Turning On . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Displaying a Document or Other Materials . . . . . . . . . . . . . . . . . . . 26 Positioning the Document Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Projecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27 Freezing an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29 Displaying Small Objects Up Close . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Displaying Live Action or Whiteboard Images . . . . . . . . . . . . . . . . 30
Projecting Through a Microscope . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Adding Annotations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Switching Between Your Computer and the Live Camera Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Displaying a Split Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Saving Images and Displaying a Slideshow
Saving Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Recording Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 Connecting an External Microphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Exporting and Importing Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Viewing and Managing Files from Your Computer . . . . . . . . . . . . 44
Displaying a Slideshow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Contents 7
Image Adjustments and Effects
Using the On-screen Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
On-screen Menu List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Function Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Memory Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Info Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Using the Included Software
Installing the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Uninstalling the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Windows 8 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Windows 7/Windows Vista/Windows XP . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Mac OS X . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Starting the Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56
Annotating Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Capturing Still Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Making Time-lapse Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60 Compatible File Format . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Editing Saved Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Managing Saved Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63
Uploading and Sharing Your Videos . . . . . . . . . . . . . . . . . . . . . . . . . 64
Solving Problems
Problems and Solutions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Operation Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Image Quality Problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Problems Using an SD Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Problems Using a USB Drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Problems Connecting a Laptop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Problems Using the Document Camera Software . . . . . . . . . . . . . . . . . . . . . . . . 67
Where to Get Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Europe . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 Africa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Middle East . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 North and Central America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 South America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Asia and Oceania . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Notices
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 General Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82
FCC Compliance Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 For United States Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83 For Canadian Users . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Declaration of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
Copyrights and Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Responsible Use of Copyrighted Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 Trademarks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Contents 8
Introduction You can use the Epson ELPDC12 document camera to capture and project pages from books or other documents, and even three-dimensional objects. With the included software, you can create time-lapse photos and annotate images produced by the document camera.
Included Items Remote control with 2 AA batteries Power cord and adapter VGA cable USB cable Software CD User's manual CD Quick Start Microscope adapter
Product Features 10
Top/Side/Rear
Name Function
A Camera head s "Camera Head" p.12
B Remote receiver Receives signals from the remote control.
C Control panel s "Control Panel" p.12
Name Function
D Security slot The security slot is compatible with the Microsaver security system manufactured by Kensington. s p.18
E Interface s "Interface" p.13
F Security bar Lets you attach a commercially available security cable to lock the document camera in place. s p.18
G SD card slot Lets you save and display images on an SD card. s p.38
Document Camera Parts 11
Camera Head
Name Function
A Microphone Captures sound when you record a video.
B [ ] Lamp switch Changes the LED lamp status in three steps: bright, dim, and off.
C LED lamp Turn on this lamp when there is not enough light on your document.
D Image rotation dial Turns the displayed image 90.
E Camera lens Captures the image.
Name Function
F Camera arm Extends or retracts the camera arm to adjust the height of the camera head.
Attention Do not rub the lens with harsh materials or subject it to shock, as it can be easily damaged. Use a soft cloth to gently wipe the lens.
Control Panel
Name Function
A [t] button Turns the document camera power on or off.
B [Source] button [ ] [ ]
[ ] Projects images from the document camera. [ ] Projects images from a computer.
C [Menu] button Opens and closes the menu.
Document Camera Parts 12
Name Function
D [ ] [ ] [ ] [ ] button When the menu screen is displayed, pressing these buttons selects menu items and setting values.
[ ] [ ] button Adjusts the image Brightness.
[Enter] button When the menu is displayed, pressing this button confirms the current item.
E [Esc] button Stops the current function. When the menu is displayed, pressing this button moves to the previous menu level.
F [Zoom] button [z] [x]
Enlarges or reduces the image without changing the projection size. s p.27
G [Focus] button Press the [Focus] button to automatically focus the image. The unit cannot focus on objects that are approximately 10 cm (4 inches) or less from the surface of the camera lens.
H [ ] button If you press and release the button, the image is frozen. If you press and hold the button, the still image is saved. s p.39
I [ ] button Starts and stops video recording.
Interface
Name Function
A Composite port Outputs composite video signals to a projector or external monitor.
B Power (AC adapter) port Connects the supplied power cord and adapter.
C Computer In port Inputs image signals from a computer.
D Display Out port Outputs image signals to a projector.
E HDMI port Outputs image signals to a video device or computer that is compatible with HDMI signal.
F USB-A (TypeA) port Lets you annotate live images by connecting a commercially available USB mouse. s p.33 Lets you save and display images on a USB drive.
G USB-B (TypeB) port Connects the document camera to a computer via the supplied USB cable when using the included software.
H Mic In port Connects a commercially available microphone when recording audio and video.
Document Camera Parts 13
Base
Name Function
A Mounting points You can attach the document camera to a table, cart, or stand with commercially available M4 bolts. s p.18
B Security bar Lets you attach a commercially available security cable to lock the document camera in place. s p.18
Document Camera Parts 14
Remote Control Projector operations
Name Function
A [t] button When used with an Epson projector, turns the projector on or off.* You cannot operate the document camera with this button.
B [A/V Mute] button Turns the video and audio of an Epson projector on or off.*
C [Source Search] button Changes the input source connected to an Epson projector.*
* This is not supported by some projectors. For more details, contact your local dealer or the nearest service center provided in this guide. s "Where to Get Help" p.69
Document camera operation
Name Function
D [t] button Turns the document camera on or off. You cannot operate a projector with this button.
E [Auto Focus] button Press the [Auto Focus] button to automatically focus the image. The unit cannot focus on objects that are approximately 10 cm (4 inches) or less from the surface of the camera lens.
F [Freeze] button Freezes the current image; press the button again to continue.
G [Menu] button Displays and closes the menu.
H [ ] [ ] [ ] [ ] buttons
When the menu or Help screen is displayed, pressing these buttons selects menu items and setting values.
I [Enter] button When the menu is displayed, pressing this button confirms the current item.
Remote Control Buttons 15
Name Function
J [Esc] button Stops the current function. When the menu is displayed, pressing this button moves to the previous menu level.
K [Snapshot] button [ ]
Captures still images.
L [Record] button [ ]
Starts and stops video recording.
M [Zoom] button [z] [x]
Enlarges or reduces the image without changing the projection size. s p.27
N [Brightness] button [ ] [ ]
Adjusts the image brightness.
O [Source] button [ ] [ ]
[ ] Projects images from a computer. [ ] Projects images from the document camera.
P Remote control light emitting area
Outputs remote control signals.
Remote Control Buttons 16
When you're not using the document camera, simply fold its arm down as shown.
Caution Do not try to press the arm flat or fold it backwards, or it may get damaged.
Storing the Document Camera 17
You can secure the document camera by fastening a cable to the security bar, shown below, or by inserting a Kensington anti-theft cable into the Kensington security port.
In addition, you can attach the document camera to a table, cart, or stand at the mounting points indicated below. Use M4 bolts; you can thread them into the document camera case to a maximum depth of 9 mm (0.35 inch).
A Mounting points
Attention Fasten the bolts securely but do not overtighten them. Do not use adhesives.
Securing the Document Camera 18
Connecting Follow the instructions in this section to set up the document camera and give a presentation.
You can connect the document camera to a projector using a standard VGA cable, composite video cable, or HDMI cable, or to other video equipment such as an external monitor.
a You can also use the document camera with a computer. s p.22
a Choose the type of cable you will use, based on the type of port that's available on your projector or other video equipment:
VGA port (computer monitor style)
VGA cable (included)
Composite video port (yellow "RCA" style)
Composite video cable
HDMI port HDMI cable
b Connect the document camera by one of the following methods:
VGA connection
A Display Out port B VGA cable
Composite video connection
A Composite port
Connecting to a Projector 20
B Composite video cable
HDMI connection
A HDMI port B HDMI cable
a When connecting with a USB cable, video from other output
ports is not displayed. When two or more cables are connected, the priority of video
output is HDMI > Display Out > Composite.
Connecting to a Projector 21
When you connect the document camera to your computer, you can use the included software to capture, edit, and play back still images and videos. s p.54 Connecting to a computer also lets you display PowerPoint slides or other applications. You can easily switch back to the live camera image at any time.
How you connect to your computer depends on the software you plan to use:
To use the included software, see "Connect for Use with the Document Camera Software" p.22 below.
If you don't plan to use the software or it's not installed on your computer, see "Connect for Use Without the Document Camera Software" p.23.
Connect for Use with the Document Camera Software
This connection method lets you use the included software, as well as display PowerPoint slides or images from another application on your computer. Make sure you've already installed the software. s p.55
a Connect the document camera to your computer with a USB cable, as shown.
A USB cable B VGA cable
a When connecting with a USB cable, video from other output
ports is not displayed. You cannot display images by directly connecting the
document camera to a projector with a USB cable. Connect the document camera to a USB 2.0 port of a
computer. If you connect it to a USB 3.0 port, it may not function normally.
b Connect your computer to your projector using a VGA cable.
a It's also possible to connect with composite video, but most computers lack this type of port.
c Follow the instructions on p.56 to use the document camera software.
Connecting to a Computer 22
a If an image doesn't appear on the screen, the document camera's USB Mode may be set to Mass Storage; see p.67 to change the setting. If you connected a laptop, see p.67 to check your laptop settings.
Connect for Use Without the Document Camera Software
This connection method lets you display PowerPoint slides or images from another application on your computer, but you can't use the included software.
a If you're using a desktop computer, disconnect the monitor from your computer.
b Connect a VGA cable from your computer's monitor-out port to the document camera's Computer In port.
A Computer In port
B VGA cable C VGA cable D Display Out port
c Connect a second VGA cable from the document camera's Display Out port to your projector.
a If you connected a laptop but the image doesn't appear on the
screen, check your laptop settings. s p.67 A video signal from the Computer In port can only be
output from a Display Out port.
Connecting to a Computer 23
Projecting
a Connect the power adapter as shown and plug the adapter into a wall outlet.
b Press the [t] power button to turn on the document camera. It takes about 20 seconds for the document camera to output an image.
c Turn on your projector.
d Select the appropriate "source" on the projector depending on the port to which you connected.
a When you're done using the document camera, press the [t] power button twice to turn it off, disconnect any cables, and fold down the camera arm. s p.17
Plugging In and Turning On 25
Positioning the Document Camera
a Raise the camera arm while holding the body with your other hand.
b Rotate the camera arm as shown below.
c Position the camera head above the display area.
Attention Do not try to press the arm flat or fold it backwards, or it may get damaged. The camera arm can only rotate within the range shown below.
Displaying a Document or Other Materials 26
Projecting
a Place your document on the table under the camera head. Align the center of your document with the mark on the side of the document camera.
a You can quickly align letter- or A4-size paper with the guides
on the side of the document camera. The maximum paper size that can be projected is A3
landscape.
b Slide the lamp switch to illuminate the document.
a If necessary, you can adjust the brightness of the image using the [ ] or [ ] on the document camera or remote control.
A Lamp switch B Image rotation dial C [Focus] button
c Turn the dial on the camera head to rotate the image on the screen.
a If desired, you can rotate an upside-down image by pressing the [Menu] button and select Image > Image Rotation > 180 degrees.
d Press the [Focus] button on the document camera or the [Auto Focus] button on the remote control. Your document is automatically focused.
a To sharpen hard-to-focus objects, press the [Menu] button and select Image > Focus. Use the [ ] and [ ] arrow buttons to adjust the focus.
Displaying a Document or Other Materials 27
e To zoom in on part of the image, press the [Zoom] - [z] button on the document camera or remote control. Press the [Zoom] - [x] button to zoom out.
a You can zoom up to 16x. When using the digital zoom, you can
scroll the enlarged image by pressing the [ ], [ ], [ ], and [ ] arrow buttons.
When the Zoom Area Window function is On, the entire image is displayed at the bottom-right of the screen with a box that indicates the enlarged part when you increase the zoom ratio more than twice. When it is Off, a box is displayed that indicates the enlargement ratio. To enable the Zoom Area Window function, press the [Menu] button and select Image > Zoom Area Window. When Zoom Area Window is On:
When Zoom Area Window is Off:
Depending on the output resolution of the projector or external monitor, part of the area shown in the box at the bottom-right of the screen may not be enlarged.
Image quality may decrease when the image is enlarged.
Displaying a Document or Other Materials 28
Freezing an Image Press and release the [ ] button to freeze the image. (If you press and hold the button, it saves the image. s p.39)
After freezing the image, you can remove your document while leaving its image displayed on the screen. Place your next document under the camera lens and press the button again; your presentation continues without interruption.
a You cannot enlarge the image while the image is frozen.
Displaying Small Objects Up Close To display a small object, lower the camera arm. You can place the lens within approximately 10 cm (4 inches) of the object.
To further enlarge an object, press the [Zoom] - [z] button on the document camera or remote control. Press the [Zoom] - [x] button to zoom out.
Displaying a Document or Other Materials 29
You can use the document camera to display a lecture or presentation at the front of a room, or to capture images of a whiteboard or chalkboard.
a Press the [Menu] button and select Image > Image Rotation to 180 degrees to display the image upside-down.
a Raise and rotate the camera head to face the front of the room.
b Press the [Focus] button on the document camera or the [Auto Focus] button on the remote control. The image is automatically focused.
a You can make an audio/video recording of the live presentation in the document camera's 1GB internal memory, on an inserted SD card, or with a connected USB drive or computer. s p.40, p.60
Displaying Live Action or Whiteboard Images 30
To display objects as seen through a microscope, use the included microscope adapter.
a Adjust the focus and zoom of a microscope before attaching to the
document camera. Images may not be displayed correctly depending on the optical
properties of your microscope.
A Buttons B Adapter ring
a Attach the microscope adapter to the image rotation dial. Press the buttons and push the adapter in.
b Place the camera head with the adapter directly over the microscope lens. Fit the adapter to the diameter of the eyepiece by pulling out the adapter ring. It extends up to about 5 mm (1/4 inch).
c Press the [Menu] button and select Image > Microscope > On. This optimizes the image settings for use with a microscope.
Projecting Through a Microscope 31
a If you manually adjust the brightness or zoom after setting Microscope to On in step 3, Microscope is automatically set to Off.
Projecting Through a Microscope 32
When a USB mouse is connected to the document camera, the annotation tools are displayed on the live camera image and you can add handwritten or graphic annotations with the USB mouse.
a You can only use the annotation function when the live camera
image is displayed. USB mouse devices that require installation of a driver cannot be
used. Also, some USB mouse models may not be compatible.
a Connect a USB mouse to the document camera.
A USB-A port
b The annotation tool bar is displayed on the bottom of the screen.
Tool Function
A Colors Selects a color for the annotation.
B Line width Selects a line width for the annotation.
C Graphics Changes a graphic (straight, freehand, circle, or square).
D Eraser Clears an annotation with the selected eraser size.
E Clear all Clears all annotations.
F Pointer Selects a tool and adds annotations. The shape of the pointer varies depending on the button or tool that you select.
c Select a tool. Click the icon with the left mouse button on the annotation tool bar.
For example, when you draw a square:
Adding Annotations 33
a Use the left mouse button to draw lines or graphics or erase with an eraser.
d Disconnect the USB mouse to end the annotation.
a You cannot use the on-screen menu while annotating. Images with your annotations cannot be saved.
Adding Annotations 34
If you've connected a computer (s p.22), you can show PowerPoint slides or images from any other application on your computer. You can easily switch back-and-forth between your computer application and the live camera image.
If you've connected your computer with a USB cable (s p.22), you can use the document camera software to display captured images and videos, or use another application of your choice. To display the live camera image, make sure you've selected Capture mode in the document camera software. s p.56
If you've connected your computer with a VGA cable (s p.23), use the document camera's [Source] buttons to switch between your computer and the live camera image: To display your computer image (such as a PowerPoint presentation), press the [Source] - [ ] button on the document camera or remote control. To switch back to the live camera image, press the [Source] - [ ] button.
Switching Between Your Computer and the Live Camera Image 35
If you have images saved in the document camera's internal memory or on an SD card or USB drive (s p.38), you can display two images at the same time.
a When connecting to a computer with a USB cable, you cannot use this function.
a Press the [Menu] button and select Memory > Split Screen.
You see this setup screen, with the left image highlighted:
A Highlighted image
b Use the [ ] and [ ] arrow buttons to select the source for the highlighted image. You can select from these sources:
Live Display to display the camera image Internal Memory to display an image stored in internal memory SD Card to display an image stored on an SD card, if one is
inserted USB Flash Drive to display an image stored on a USB drive, if
one is connected
a Images on the SD card or USB drive must be stored in the
proper format to be readable. s p.67 When USB Flash Drive is not displayed, even if one is
connected, set USB Mode to Application.
c Press the [Enter] button to confirm the selection.
Displaying a Split Screen 36
d If you select Internal Memory, SD Card, or USB Flash Drive as the source, you see a screen that lets you select which image to use:
Use the [ ] [ ] [ ] [ ] arrow buttons to highlight the image you want to display, and press [Enter] to select it. Select Return to finish setting up the split screen.
e Repeat steps 2 through 4 to select the source for the right side.
a You cannot display the live camera image or video on both sides of the screen.
f Once you're done setting up both sides of the screen, press [ ] then press [Enter]. The selected images appear side-by-side on the screen.
a When connecting to a projector with an HDMI cable, the movie's audio is also played.
g To exit split screen mode, press [Menu] or [Esc].
Displaying a Split Screen 37
Saving Images and Displaying a Slideshow Images captured by the document camera can be saved not only in the internal memory but also on an SD card or USB drive. Also, stored images can be imported or exported between the document camera and an SD card or USB drive. You can view them as a slideshow or on a connected computer.
a SD and SDHC cards are supported. When you save images on the SD card, make sure that it is not set to LOCK (write-protected). USB drives with a security function cannot be used. When connecting to a computer with a USB cable, you cannot use the functions described in this chapter except for s "Viewing and Managing Files from Your
Computer" p.44.
Captured still images are stored in the internal memory, an SD card, or a USB drive. If there is more than one save destination, the priority is as follows: USB drive > SD card > the internal memory. If the save destination only has a small capacity remaining, the image is saved in the next destination.
a Images are saved in JPEG format.
a Insert an SD card face-up or connect a USB drive, if needed.
a When you store images on a USB drive, make sure you set Function > USB Mode to Application.
b Display the live camera image you want to save. Adjust any settings, as needed.
c Press the [ ] button to capture the image. Press and release when you use the remote control, press and hold when you use the control panel.
You see the displayed in the upper right of the screen, and the image is saved.
a Using the control panel, if you press and release the button without holding it, the image is frozen on the screen instead of being saved in memory.
d Repeat steps 2 and 3 for any additional images you want to save.
a If all of the save destinations only have a small capacity
remaining, "The memory is full." is displayed and the image is not saved.
Do not disconnect the power cable from the document camera or remove an SD card or USB drive from the document camera while exporting data. Otherwise, the data may not be saved properly.
Saving Images 39
The document cameras live image is recorded in the internal memory, an SD card, or a USB drive. If there is more than one save destination, the priority is as follows: USB drive > SD card > the internal memory. If the save destination only has a small capacity remaining, the image is saved in the next destination.
a Movies are saved in AVI format. (Motion JPEG+PCM) You can record up to 2GB for each file.
a Insert an SD card face-up or connect a USB drive, if needed.
a When you store images on a USB drive, make sure you set Function > USB Mode to Application.
b Display the live camera image you want to save. Adjust any settings, as needed.
a Motor noises by zoom or focus may be picked up by the internal microphone. Make sure you adjust the zoom or focus settings before starting a recording, or use an external microphone to record the audio. s p.40
c Press the [ ] button to start recording.
a The elapsed time displayed while recording is not displayed on the saved image.
d To stop recording, press the [ ] button again.
a If all of the save destinations only have a small capacity
remaining, "The memory is full." is displayed and the image is not saved.
If the memory becomes full during recording, the image recorded up to that point is saved and recording stops.
Do not disconnect the power cable from the document camera or remove an SD card or USB drive from the document camera while recording. Otherwise, the data may not be saved properly.
Connecting an External Microphone If you connect an condenser microphone to the document camera, the audio from the microphone is also recorded along with a movie.
Recording Movies 40
a Press the [Menu] button and select Function > Ext. Mic. Volume to
adjust the recording volume of the external microphone. When an external microphone is connected, the internal microphone
is disabled. Plug-in power is not supported. Live audio from a microphone cannot be output.
A Mic In port
Recording Movies 41
The stored images in the internal memory can be exported to an SD card or USB drive. Also, the stored images on an SD card or USB drive can be imported to the internal memory. The steps below explain how to export images in the internal memory.
a Insert an SD card face-up or connect a USB drive, if needed.
b Press the [Menu] button and select Memory > Internal Memory.
a When importing images from an SD card or USB drive to the internal memory, select SD Card or USB Flash Drive.
You see this screen, showing the images stored in internal memory:
c Use the [ ] [ ] [ ] [ ] arrow buttons to highlight each image you want to export, and press [Enter] to select it. (Press [Enter] again to deselect it.) A checkmark is added to each selected image.
a To add checkmarks to all images, choose Select All. To remove all checkmarks, choose Select All again.
d Select Export(SD) or Export(USB) and press [Enter].
a When importing images from an SD card or USB drive to the internal memory, select Import.
e Do one of the following:
Disconnect the SD card or USB drive If you want to leave the SD card or USB drive in the document
camera, press [Menu] or [Esc] to close the screen.
Exporting and Importing Images 42
a If you want to remove the SD card, press in on the card and
then pull it straight out of the slot. The SD Card screen automatically closes.
When USB Flash Drive is not displayed even if one is connected, set USB Mode to Application.
Exporting and Importing Images 43
You can use your computer with a USB cable to access files stored in the camera's internal memory. Before using the document camera like this, you have to change the function of its USB port as described below.
a Connect the document camera to your projector with a VGA cable, composite video cable, or HDMI cable. s p.20
b Turn on the document camera and projector.
c Press the [Menu] button and select Function > USB Mode. Change the setting to Mass Storage.
d Disconnect the projector from the document camera.
e Now connect the document camera to your computer with a USB cable.
A USB cable
The document camera's internal memory appears as an external drive on your computer.
a The document camera does not have a built-in clock.
Therefore, when you view files from your computer, they won't show the actual time they were created.
Connect the document camera to a USB 2.0 port of a computer. If you connect it to a USB 3.0 port, it may not function normally.
f Use your computer to view the files, or to copy, move, or delete them.
a If you copy images from your computer to the document camera, they must be in the proper format to be readable. s p.67
g When you're done, disconnect the computer.
Caution Before disconnecting the USB cable, make sure your files have finished copying. Otherwise, they may be damaged.
h Reconnect the projector.
i Press the [Menu] button and select Function > USB Mode. Change the setting back to Application.
a If you don't change the setting back, you won't be able to see a live camera image when you use the document camera software. If you don't plan to use the software, you don't need to change the setting back.
Viewing and Managing Files from Your Computer 44
Once you have stored images on the document camera's internal memory or on an SD card or USB drive, you can display a slideshow.
Attention When you rotate an image, we recommend backing up data on the document camera's internal memory, USB drive, or SD card to another media.
a In addition to images captured with the document camera, you can display images stored in the inserted SD card or connected USB drive. You can also display images copied to the document camera from your computer (s p.44), but they must be in the proper format. s p.67
a Press the [Menu] button and select Memory.
b Select Internal Memory (to view images in internal memory), SD Card (to view images on your SD card, if inserted), or USB Flash Drive (to view images on your USB drive, if connected).
You see a screen like this:
c To rotate an image, use the [ ] [ ] [ ] [ ] arrow buttons to highlight it and press [Enter] to select it. (Press [Enter] again to deselect it.) A checkmark is added to the image. In the same way, select any additional images you want to rotate, and then select Rotate.
All checkmarked images are rotated 90 degrees clockwise.
Attention When using this device to rotate and display images on the document camera's internal memory, a USB drive, or an SD card, the original image may be changed and then saved. You can only rotate up to 12 images at once.
a Image quality may decrease slightly after rotating an image. Also, if your photo is time-stamped, the date will be changed to a default value.
d Use the [ ] [ ] [ ] [ ] arrow buttons to highlight each image to be displayed in the slideshow, and press [Enter] to select it. (Press [Enter] again to deselect it.) A checkmark is added to the selected images.
a To add checkmarks to all images, choose Select All. To remove all checkmarks, choose Select All again.
e Select Play/Slideshow to display the first image in the slideshow. To start or stop the movie, press [Enter].
a When connecting to a projector with an HDMI cable, the movie's audio is also played.
Displaying a Slideshow 45
f Press [ ] to advance to the next image.
Press [ ] to return to the previous image.
g End the slideshow by pressing [ ] while the last image is displayed. Or press [Menu] or [Esc] to end the slideshow at any time.
Displaying a Slideshow 46
Image Adjustments and Effects The document camera provides a full range of image adjustments and effects, including freeze image, black-and-white, and the ability to display negative film in true color.
Press the [Menu] button on the document camera or remote control to view the on-screen menu. For details of each item in the screen menu, see s p.49.
You see this screen:
Use the [ ] [ ] [ ] [ ] arrow buttons to navigate the menu and adjust the settings. Press [Enter] to select a setting. When you're done adjusting the settings, press the [Menu] or [Esc] button to close the menu and save your settings.
Using the On-screen Menu 48
Image Menu Basic image adjustments such as focus, zoom, and brightness are discussed in "Displaying a Document or Other Materials" p.26. You can make these further adjustments by pressing the [Menu] button to open the Image menu.
a When projecting a live image, you can adjust the Image menu settings.
Setup Item Explanation/Select
White Balance Adjusts the image color based on the lighting in the room where you're presenting. Auto: Automatically adjusts the image color according to the display environment. Cloudy: Suitable for use in cloudy weather. Daylight: Suitable for use in fair weather. Fluorescent: Suitable for use in a room with fluorescent lighting. Incandescent: Suitable for use in a room with incandescent lamps.
Focus Lets you manually adjust the focus if auto-focus doesn't produce a sharp enough image. Near: Adjusts the focus in. Far: Adjusts the focus out.
Image Mode Selects the setting to adjust for the image type you are displaying from the camera. Normal: Default setting. Text: Suitable for projecting black-and-white text. Display: Suitable for directly projecting the display of a tablet PC etc.
Color/B&W/Negative Displays the image in color or black-and-white. Color: Displays the image in color. Black&White: Displays the image in black-and-white. Negative: Displays the image as a negative.
Image Rotation Lets you rotate an upside-down image. Normal: Displays the image as it actually is. 180 degrees: Displays the image upside-down.
On-screen Menu List 49
Setup Item Explanation/Select
Zoom Area Window Displays the entire image at the bottom-right of the screen with a box that indicates the section that is currently being enlarged by the zoom function. On: Enables Zoom Area Window. Off: Disables Zoom Area Window.
Microscope Optimizes the image settings if using with a microscope. s "Projecting Through a Microscope" p.31 On: Sets the optimal image settings for use with a microscope. Off: Returns to the normal settings.
Noise Reduction Settings related to Noise Reduction. On: Activates Noise Reduction. Use this setting if noise occurs. Off: Deactivates Noise Reduction. If the delay in projected images bothers you, select Off.
Advanced Makes advanced settings of live image. Exposure: Adjusts the light volume of projected images. If the projected image is too dark or too bright to reproduce the original colors, you can adjust the light volume. Set it to a positive value if the overall image is dark and to a negative value if it is bright. Contrast: Adjusts the difference between bright and dark areas of images. Set it to a positive value to project vivid images and to a negative value to project monotone images. Color Adjustment: Adjusts the reddish and bluish colors of the whole image. Edge Enhancement: Adjusts the emphasis on the contours of the image. Set it to a positive value for sharp images and to a negative value for soft images. Gamma: Adjusts the coloring that occurs while displaying the image. When a smaller value is selected, the dark areas of images become brighter, but the lighter areas may become over-saturated. When a larger value is selected, you can reduce the overall brightness of the image to make the image sharper.
Reset Resets the Image menu settings to the default value.
Function Menu Setup Item Explanation/Select
USB Mode Changes how the document camera functions when connected with a USB cable. Application: Enables use of a USB drive and the included software. This is the default setting when turned on. Mass Storage: Lets you use a computer to view images stored in the internal memory.
Ext. Mic. Volume Adjusts the recording volume from an external microphone.
On-screen Menu List 50
Setup Item Explanation/Select
HDMI Output Sets the output resolution when connecting with an HDMI cable. Auto: Automatically set according to the resolution of the output device. SDTV (480p) HDTV (720p) HDTV (1080p)
Output Resolution Sets the output resolution when connecting with a VGA cable. Auto: Automatically set according to the resolution of the output device. XGA 1024x768 WXGA 1280x800 WXGA 1360x768 SXGA 1280x1024 Full HD 1920x1080
Video Format Selects the video output signal. NTSC PAL
Flickerless Eliminates flicker when giving presentations in regions with different electrical systems. 50Hz 60Hz
Language Changes the on-screen menu language.
Sleep Mode Operation settings when the document camera is inactive. On: The power automatically turns off if the document camera is inactive for a certain amount of time. Off: The power remains on even if the document camera is not being used.
Sleep Mode Timer Sets the time from when the document camera is last operated until when the power automatically turns off. 1 to 6 hour(s)
On-screen Menu List 51
Memory Menu Setup Item Explanation/Select
Split Screen Simultaneously displays two images from the internal memory, an SD card, a USB drive, or the live image. Left Source: Selects the image to be projected on the left side. Right Source: Selects the image to be projected on the right side.
Internal Memory Operations related to the internal memory. Export(SD): Exports the selected images to an SD card. Export(USB): Exports the selected images to a USB drive. Play/Slideshow: Displays the selected images in a slideshow. Select All: Selects all images in the internal memory. Delete: Deletes selected images. Rotate: Rotates selected images 90 degrees clockwise and saves them.
SD Card Operations related to an SD card. Import: Imports selected images to the document camera's internal memory. Play/Slideshow: Displays the selected images in a slideshow. Select All: Selects all images on an SD card. Delete: Deletes selected images. Rotate: Rotates selected images 90 degrees clockwise and saves them.
USB Flash Drive Operations related to a USB drive. Import: Imports selected images to the document camera's internal memory. Play/Slideshow: Displays the selected images in a slideshow. Select All: Selects all images on a USB drive. Delete: Deletes selected images. Rotate: Rotates selected images 90 degrees clockwise and saves them.
On-screen Menu List 52
Info Menu Setup Item Explanation
Memory Capacity Free Space: Displays the remaining capacity of the document cameras internal memory. Total Size: Displays the total capacity of the document cameras internal memory.
Number of Files Displays the number of files saved in the document cameras internal memory.
Version Displays the firmware version of the document camera.
On-screen Menu List 53
Using the Included Software The included software lets you use the document camera to capture still images, make time-lapse movies, record live videos with audio, and edit and play back captured files. The software also lets you annotate images from the document camera with text and graphics, and upload your videos to popular websites.
Before starting, follow the instructions in this section to install the software.
a For detailed help when using the software, do one of the following: Windows: Press F1 or select Application Help from the Extras menu. Mac OS X: Select Help from the menu bar.
You can install the software on a Windows or Mac OS X computer. See p.82 for system requirements.
a Press the [t] power button to turn on the document camera.
b Connect the document camera to your computer with a USB cable. s p.22
c Insert the CD labeled "EPSON Document Camera Software" into your computer.
d When you see the license agreement, click Yes.
e Follow the instructions on the screen to install all the software.
a When you see a screen asking if you want to install the Button Manager and TWAIN Driver for Epson Document camera (Windows only), be sure to allow the software to install.
Uninstalling the Software Follow these steps if you need to uninstall the software.
Windows 8
a Select Search on the Charms, and then right-click (press and hold) ArcSoft Application Software for Epson Document Camera.
b Select Uninstall from the app bar.
c Select ArcSoft Application Software for Epson Document Camera, and then select Uninstall.
Windows 7/Windows Vista/Windows XP
a Windows 7/Windows Vista: Select Control Panel > Programs and Features. In Classic View, select Programs > Uninstall a program instead. Windows XP: Select Control Panel > Add or Remove Programs.
b Select ArcSoft Application Software for Epson Document Camera.
c Windows 7/Windows Vista: Click Uninstall/Change. Windows XP: Click Change/Remove.
Mac OS X
a Open the Applications folder.
b Drag the ArcSoft Application Software for Epson Document Camera to the Trash.
Installing the Software 55
a Connect the document camera to a computer with a USB cable. s p.22
b Start the software:
Windows 8: Select Search on Charms, and then select ArcSoft Application Software for Epson Document Camera.
Windows 7/Windows Vista/Windows XP: From Programs or All Programs, select ArcSoft Application Software for Epson Document Camera. If the software does not start, install the Windows Media Player.
Mac OS X: Open the Applications folder, then double-click ArcSoft Application Software for Epson Document Camera.
You see the screen shown below.
a If you see a message that the document camera is not found, make sure it is connected and turned on. Then click the Connect button in the upper-right corner of the screen.
A Main modes (capture, edit, and file management) B Capture album (previously captured images) C Capture buttons (still image, burst, time-lapse, and video) D Live Annotation button E Preview area (live camera image) F Connect button
Starting the Software 56
You can annotate live images from the document camera with text and graphics while giving a presentation. When you capture an image, your annotations will be included with the image; if you record your presentation as a video, the recording will show your annotations as they're being added.
a You can also annotate still images after they've been captured using the Edit screen. s p.62
a If necessary, click the Capture button to enter Capture mode. Your live camera image appears in the preview area.
b Click the Live Annotation button.
c Select a drawing tool, such as Pen, Line, or Text.
d Change the properties of the selected tool.
e Use the selected tool to add text and graphics.
f To clear an annotation, use the Eraser tool or click the Undo button to clear the last change you made. To clear all annotations, select the Eraser tool and then click the Clear all button that appears above the preview area.
To save an annotated image, click the Take Picture button at the bottom of the screen. s p.58 To record a video that shows annotations as they're being made, see p.60.
Annotating Images 57
You can capture a still image or a quick series of images (called a burst).
a If necessary, select the settings you want to use. Click the Settings button and select the Image tab.
Select the default image format, quality level, and other properties. Choose the number of photos, up to 10, that will be captured
with each burst (5 is the default).
b To capture a still image, click the Take Picture button.
c To capture a quick series of images, click the Burst button.
Your captured image(s) appear in the Capture album on the left side of the screen. To display a captured image through your projector, double-click the image or right-click it and select Preview.
Capturing Still Images 58
You can record a time-lapse movie to show gradual changes that occur over several hours.
a Click the Settings button and select the Time Lapse tab.
Set the time interval between each frame (5 seconds minimum). Set the total capture duration (up to 72 hours). Click OK to close the Settings screen.
b Click the Start Time Lapse button to begin capturing images.
When the process is done, the time-lapse movie or image appears as an icon in the Capture album on the left side of the screen. To display the movie through your projector, double-click the icon or right-click it and select Preview.
Making Time-lapse Movies 59
You can make an audio/video recording of your presentation. Set the resolution under Full HD (19201080).
a If necessary, select the settings you want to use. Click the Settings button and select the Video tab.
Select the default video format, quality level, and other properties. Set the maximum duration of each video (up to 8 hours) and see
how much hard disk space it will use.
b To capture sound, click the Settings button, select the Audio tab, and select ELPDC12 from Audio Device.
c Click the Record Video button to start recording. Click Record Video again to stop.
You can also use the [ ] button on the control panel to start and stop recording.
a To start recording using the [ ] button, Button Manager needs to be installed and running on your computer. Your movie appears as an icon in the Capture album on the left side
of the screen. To display the movie through your projector, double- click the icon or right-click it and select Preview. When you connect with the computer, you cannot use two document cameras at the same time.
Compatible File Format Type Extension
Still images .jpg/.bmp
Recording Videos 60
Type Extension
Videos Windows: .wmv (WMV2+WMA) .avi (YUV+PCM) .mpg (MPEG Video+ MPEG Audio) Mac OS X: .mov (Motion JPEG+PCM)
Recording Videos 61
You can use the Edit screen to improve the quality (such as brightness and contrast) of captured pictures and videos. With still images, you can zoom in on part of the image, rotate the image, or flip it to create a mirror image. You can also annotate still images. While viewing a video, you can pause it and capture a still image from the current frame.
a Click the Edit button to enter Edit mode.
b For detailed help when using the software, do one of the following: Windows: Press F1 or select Application Help from the Extras menu. Mac OS X: Select Help from the menu bar.
Editing Saved Files 62
You can use the File Management screen to sort and locate captured images and videos. By rating them and applying "tags" or descriptive text, you can make it easier to find them later on.
a Click the File Management button to enter File Management mode.
b For detailed help when using the software, do one of the following: Windows: Press F1 or select Application Help from the Extras menu. Macintosh: Select Help from the menu bar.
Managing Saved Files 63
You can easily upload your videos to popular video-sharing websites, such as YouTube and SchoolTube.
a This feature is not available for Apple Macintosh systems.
a Click the Edit button.
b Select a video.
c Select a website.
d Follow the instructions on the screen to log in, provide a title for your video and other descriptive information, and upload the file.
Uploading and Sharing Your Videos 64
Solving Problems
Operation Problems No image appears on the screen
After you press the [t] Power button, wait a few moments for the image to appear. It takes about 20 seconds for the document camera to output an image.
Make sure your projector is connected. s p.20 If you're connecting it through a computer, see p.22.
If you've connected a laptop, see "Problems Connecting a Laptop" p.67.
The document camera may be set to display an image from your computer. Press the [Source] - [ ] button on the document camera or remote control to display the live camera image.
Select the correct source on your projector. The source refers to the port on the projector to which you've connected the video cable. If you're using a VGA cable, the source may be called something like "Computer" or "PC".
Make sure your projector is turned on and not in sleep mode. Make sure its picture has not been "muted" or turned off.
If you made a USB connection, the document camera's USB Mode setting may be set to Mass Storage. You need to change this setting to Application. First disconnect the USB cable, then reconnect to the projector using a VGA cable, composite video cable, or HDMI cable. Press the [Menu] button and select Function > USB Mode, then change the setting to Application. Now you can use the USB cable to display the image.
Image Quality Problems The image is fuzzy or out of focus
The document camera needs hard edges or sharp lines in the image to be able to focus properly. If the image has only soft edges, try placing a different document under the camera lens while adjusting the focus. Or focus the image manually with the Focus adjustment in the Image menu. s p.49
Make sure the lens is at least 10 cm (4 inches) away from the object you're viewing.
If you're using a projector to display the image, check its focus.
The image brightness or color isn't correct
To illuminate your document, slide the lamp switch on the side of the camera head.
Press the [ ] or [ ] button to increase or decrease image brightness. Set the White Balance setting to Auto to adjust the color automatically. s p.49 If the color is still not correct, choose the setting for the type of lighting you're presenting under (Cloudy, Daylight, Fluorescent, or Incandescent).
If the document camera was used with a microscope, be sure to turn the Microscope setting off when you return to displaying ordinary documents. s p.49
Other image problems
If the image is stretched or has black bars, you may need to change the Output Resolution in the Function menu.
a If you think some settings may have been changed, you can use the Reset option to return all the image settings back to their standard values except the Output Resolution setting. s p.50
Problems and Solutions 66
Problems Using an SD Card Certain images don't appear
If you use your computer to copy images to the document camera's internal memory or an SD card, you need to make sure their format is correct:
Images must be DCF-compliant JPEG files to be displayed, such as from a digital camera. Avoid editing your images, as this may change their format and prevent them from being displayed.
Images must be named using the format ABCD1234.JPG, where ABCD is any combination of upper- or lowercase letters and 1234 is any combination of numbers. For example: Pict0001, Pict0002, etc.
Images must be placed in a folder named DCIM\123ABCDE, where 123 is any combination of numbers and ABCDE is any combination of upper- or lowercase letters. If this folder structure doesn't exist, first create a folder named DCIM, then create a folder within it with the desired name (for example, 100EPSON).
Image files don't have the correct time stamp
The document camera does not have a built-in clock. Therefore, when you view captured image files from your computer, they won't show the actual time they were created.
Problems Using a USB Drive Images stored on a USB drive are not displayed
The document camera's USB Mode setting may be set to Mass Storage. Press the [Menu] button and select Function > USB Mode, then change the setting to Application.
There are no images stored on the USB drive
The document camera's USB Mode setting may be set to Mass Storage. Press the [Menu] button and select Function > USB Mode, then change the setting to Application.
Image files don't have the correct time stamp
The document camera does not have a built-in clock. Therefore, when you view captured image files from your computer, they won't show the actual time they were created.
Problems Connecting a Laptop If you've connected a laptop computer (s p.22) but the image doesn't appear on the screen, check the following:
Windows: Hold down the Fn key and press the function key (such as or CRT/LCD) that lets you display on an external monitor. On most systems, the or CRT/LCD key lets you toggle between the LCD screen and the projector, or display on both at the same time. Check your monitor settings to make sure both the LCD screen and the external monitor port are enabled. From the Control Panel, open the Display utility. Click the Settings tab, then click Advanced. The method for adjusting the settings varies by brand; you may need to click a Monitor tab, then make sure the external monitor port is set as your primary display and/or enabled. See your computer's documentation or online help for details.
Mac OS X: From the Apple menu, select System Preferences, then click Display or Displays. Select VGA Display or Color LCD, click Arrangement or Arrange, and make sure Mirror Displays is checked.
Problems Using the Document Camera Software The buttons on the document camera don't work with the software
When you installed the software, the Button Manager and TWAIN Driver for Epson Document camera (Windows only) weren't installed. Reinstall all
Problems and Solutions 67
the software, being sure to allow the Button Manager and TWAIN Driver for Epson Document camera to install.
You don't see the live camera image on your computer
The document camera's USB Mode setting may be set to Mass Storage. You need to change this setting to Application. First disconnect the USB cable, then reconnect to the projector using a VGA cable, composite video cable, or HDMI cable. Press the [Menu] button and select Function > USB Mode, then change the setting to Application. Now you can use the USB cable to display the image.
Problems and Solutions 68
Addresses and phone numbers are subject to change. For the most current information, check the website of your regional sales office listed below. If you don't find one in your area, visit Epson's main website at www.epson.com.
Europe ALBANIA ITD Sh.p.k. Gjergji Center Rr Murat Toptani 04000 Tirana Albania Tel: 00355 4 2256031 Fax: 00355 4 2256013 http://www.itd-al.com
AUSTRIA Epson Deutschland GmbH Buropark Donau Inkustrasse 1- 7 / Stg. 6 / 2. OG A-3400 Klosterneuburg Austria Tel: +43 (0) 2243 - 40 181 - 0 Fax: +43 (0) 2243 - 40 181 - 30 http://www.epson.at
BELGIUM EPSON Europe B.V. Branch office Belgium
Belgicastraat 4 - Keiberg B-1930 Zaventem Belgium Tel: +32 2/ 7 12 30 10 Fax: +32 2/ 7 12 30 20 Hotline: 070 350120 http://www.epson.be
BOSNIA AND HERZEGOVINA NET d.o.o. Computer Engineering Vukovarska 24 88000 Mostar Bosnia and Herzegovina Tel: 00387 36449660 Fax: 00387 36449669 E-mail: info@net.com.ba http://www.net.com.ba
BULGARIA EPSON Service Center, Bulgaria c/o ProSoft Central Service Akad. G. Bonchev SRT. bl.6 1113 Sofia, Bulgaria Tel: 00359 2 979 30 75 Fax: 00359 2 971 31 79 Email: info@prosoft.bg http://www.prosoft.bg
CROATIA MR servis d.o.o. Dugoselska cesta 5 10370 Rugvica, Croatia Tel: 00385 16401111 Fax: 00385 13654982 E-mail: info@mrservis.hr http://www.mrservis.hr
Where to Get Help 69
CYPRUS Mechatronic Ltd. 88 Digenis Akritas Avenue "Loizides Centre 2" - 2nd Floor CY-1061 Nicosia, Cyprus Tel: 00357 22582258 Fax: 00357 22582222 http://www.mechatronic.com.cy
CZECH REPUBLIC Epson Europe B.V.Branch Office Czech Republic Slavickova 1a 63800 Brno Czech Republic Hotline: 800 142 052 E-mail: infoline@epson.cz http://www.epson.cz
DENMARK EPSON Denmark Transformervej 6 2730 Herlev, Denmark Tel: 44508585 Fax: 44508586 Hotline: 80808047 Email: danmark@epson.dk http://www.epson.dk
ESTONIA EPSON Service Center, Estonia c/o Kulbert Ltd. Sirge 4, 10618 Tallinn, Estonia Tel: 00372 671 8160 Fax: 00372 671 8161 http://www.epson.ee
FINLAND Epson Finland Rajatorpantie 41 C FI-01640 Vantaa, FInland Hotline: 0201 552090 http://www.epson.fi
FRANCE and DOM-TOM TERRITORIES EPSON France S.A. 150 rue Victor Hugo BP 320 92305 LEVALLOIS PERRET Cedex, France Hotline: 0821017017 http://www.epson.fr
GERMANY EPSON Deutschland GmbH Otto-Hahn-Strasse 4 D-40670 Meerbusch, F.R. Germany Tel: +49-(0)2159-538 0 Fax: +49-(0)2159-538 3000 Hotline: 01805 2341 10 http://www.epson.de
GREECE Oktabit S.A. Gounari 26, 15343 Agia Paraskevi Greece Tel: 0030 210 6067181 Fax: 0030 210 6067180 http://www.oktabitgr.com
Where to Get Help 70
HUNGARY Epson Europe B.V. Branch Office Hungary Infopark setany 1. H-1117 Budapest, Hungary Hotline: 06 800 14 783 E-mail: infoline@epson.hu http://www.epson.hu
IRELAND Epson (UK) Ltd. Westside, London Road Hemel Hempstead, Herts HP3 9TD, U.K. Hotline: 01 679 9015 http://www.epson.ie
ISRAEL Epson Israel 2 Habonim st. Ramat Gan, Israel Tel: +972-3-5751833 Fax: +972-3-575161 http://www.epson.co.il
ITALY EPSON Italia s.p.a. Via M. Vigano de Vizzi, 93/95 20092 Cinisello Balsamo Mirano, Italy Tel: +39 06. 660321 Fax: +39 06. 6123622 Hotline: +39 06.60521503 http://www.epson.it
KAZAKHSTAN EPSON Kazakhstan Rep Office 97, Samal-2, bldg A1, 5th floor Business Center Samal Towers Almaty 050051, Kazakhstan Phone +7 727 3560260 Fax +7 727 3560260 http://www.epson.kz
LATVIA EPSON Service Center, Latvia c/o ServiceNet LV Jelgavas 36 1004 Riga, Latvia Tel.: 00 371 746 0399 Fax: 00 371 746 0299 http://www.epson.lv
LITHUANIA EPSON Service Center, Lithuania c/o ServiceNet Gaiziunu 3 50128 Kaunas, Lithuania Tel.: 00 370 37 400 160 Fax: 00 370 37 400 161 http://www.epson.lt
Where to Get Help 71
LUXEMBURG EPSON Europe B.V. Branch office Belgium Belgicastraat 4-Keiberg B-1930 Zaventem Belgium Tel: +32 2/ 7 12 30 10 Fax: +32 2/ 7 12 30 20 Hotline: 0900 43010 http://www.epson.be
MACEDONIA Digit Computer Engineering Bul. Partizanski Odredi 62 Vlez II mezanin 1000 Skopie, Macedonia Tel: 00389 2 3093393 Fax: 00389 2 3093393 E-mail: digit@digit.com.mk http://www.digit.com.mk
NETHERLANDS Epson Europe B.V. Benelux sales office Entrada 701 NL-1096 EJ Amsterdam Netherlands Tel: +31 20 592 65 55 Fax: +31 20 592 65 66 Hotline: 0900 5050808 http://www.epson.nl
NORWAY Epson Norway
Fjordveien 3 1363 Hvik, Norway Tel: 4780030030 E-mail: ksbl@telenor.com http://www.epson.no
POLAND Epson Europe B.V. Branch Office Poland Ul. Bokserska 66 PL-02-690 Warszawa, Poland Hotline: (0) 801-646453 http://www.epson.pl
PORTUGAL Epson Iberica S.A.U.Branch Office Portugal Rua Gregorio Lopes, Lote 1514, Restelo, 1400 Lisboa, Portugal Tel: 213035400 Fax: 213035490 Hotline: 707 222 000 http://www.epson.pt
ROMANIA Epson Europe B.V.Branch Office Romania Strada Ion Urdareanu nr. 34 Sector 5, 050688 Bucuresti Romania Tel: 00 40 21 4025024 Fax: 00 40 21 4025020 http://www.epson.ro
Where to Get Help 72
RUSSIA Epson CIS Schepkina street, 42, Bldg 2A, 3rd floor 129110, Moscow, Russia Tel: +7 (495) 777-03-55 Fax: +7 (495) 777-03-57 http://www.epson.ru
UKRAINE Epson Kiev Rep. Office Pimonenko street, 13, Bldg 7B, Office 15 04050, Kiev, Ukraine Phone +38 (044) 492 9705 Fax +38 (044) 492 9706 http://www.epson.ru
SERBIA AVG d.o.o. Beograd Prve pruge 31c11080 Zemun, BeogradRepublic of Serbia Tel: 00381 11 3191868 E-mail: office@a-v-g.rs http://www.a-v-g.rs
SLOVAKIA Epson Europe B.V. Branch Office Czech Republic Slavickova 1a 638 00 Brno Hotline: 0850 111 429 (national costs) Email: infoline@epson.sk http://www.epson.sk
SLOVENIA Birotehna d.o.o
Litijska Cesta 259 1261 Ljubljana - Dobrunje Slovenia Tel: 00 386 1 5853 410 Fax: 00386 1 5400130 E-mail: info@birotehna.si http://www.birotehna.si
SPAIN Epson Ibrica, S.A.U. Av. de Roma, 18-26 08290 Cerdanyola del Valls Barcelona, Spain Tel: 93 582 15 00 Fax: 93 582 15 55 Hotline: 902 28 27 26 http://www.epson.es
SWEDEN Epson Sweden Box 329 192 30 Sollentuna Sweden Tel: 0771-400134 http://www.epson.se
Where to Get Help 73
SWITZERLAND Epson Deutschland GmbH Branch office Switzerland Zweigniederlassung Kloten Steinackerstrasse 34 CH-8302 Kloten Switzerland Tel: +41 (0) 43 255 70 20 Fax: +41 (0) 43 255 70 21 Hotline: 0848448820 http://www.epson.ch
TURKEY Tecpro Bilgi TeknolojileriTic. ve San. Ltd. Sti. Sti. Telsizler mah. Zincirlidere Cad. No: 10 Kat 1-2 Kagithane 34410 Istanbul Turkey Tel: 0090 212 2684000 Fax: 0090212 2684001 E-mail: epson@tecpro.com.tr http://www.epson.com.tr
UNITED KINGDOM Epson (UK) Ltd. Westside, London Road Hemel Hempstead Herts HP3 9TD, U.K. Tel: (01442) 261144 Fax: (01442) 227227 Hotline: 08704437766 http://www.epson.co.uk
Africa Contact your dealer Email: support@epson.co.za http://www.epson.co.za or http://www.epson.fr
SOUTH AFRICA Epson South Africa Grnd. Floor. Durham Hse, Block 6 Fourways Office Park Cnr. Fourways Blvd. & Roos Str. Fourways, Gauteng. South Africa Tel: +27 11 465 9621 Fax: +27 11 465 1542 Helpdesk: 0860 337766 or +27 11 201 7741 Helpdesk: 0860 337766 or +27 11 201 7741 Email: support@epson.co.za http://www.epson.co.za
Middle East Epson (Middle East) P.O. Box: 17383 Jebel Ali Free Zone Dubai UAE (United Arab Emirates) Tel: +971 4 88 72 1 72 Fax: +971 4 88 18 9 45 Email: supportme@epson.eu http://www.epson.ae
Where to Get Help 74
North and Central America CANADA Epson Canada, Ltd. 185 Renfrew Drive Markham, Ontario L3R 6G3 Canada Tel: 905-709-9475 or 905-709-3839 http://www.epson.ca
COSTA RICA Epson Costa Rica, S.A. De la Embajada Americana, 200 Sur y 200 Oeste Pavas, San Jose Costa Rica Tel: 800-EPSONCR (800-3776627) http://www.epson.co.cr
MEXICO EPSON Mexico, S.A. de C.V. Boulevard Manuel Avila Camacho 389 Edificio 1, Conjunto Legaria Col Irrigacin, C.P. 11500 Mxico, DF Tel: (52 55) 1323-2052 / (52 55) 1323-2096 / (52 55) 1323-2127 http://www.epson.com.mx
ECUADOR Epson Ecuador Tel: 604-4220 (Guayaquil) Tel: 04-604-4220 (otras ciudades) http://www.epson.com.ec
UNITED STATES Epson America, Inc. 3840 Kilroy Airport Way Long Beach, CA 90806 Tel: 562-276-4394 http://www.epson.com
South America ARGENTINA EPSON Argentina SRL. Ave. Belgrano 970 (1092) Buenos Aires, Argentina Tel: (54 11) 5167-0300 http://www.epson.com.ar
BRAZIL EPSON do Brasil Av. Tucunar 720 Tambor Barueri, Sao Paulo, SP 06460-020 Brazil Tel: (55 11) 3956-6868 http://www.epson.com.br
Where to Get Help 75
CHILE Epson Chile S.A. La Concepcin 322 Piso 3 Providencia, Santiago, Chile Tel: (562) 484-3400 http://www.epson.cl
COLOMBIA Epson Colombia Ltd. Calle 100 No 19-54 Piso 7 Bogota, Colombia Tel: (57 1) 523-5000 http://www.epson.com.co
PERU Epson Peru S.A. Av. Canaval y Moreyra 590 San Isidro, Lima, 27, Per Tel: (51 1) 418 0210 http://www.epson.com.pe
VENEZUELA Epson Venezuela S.A. Calle 4 con Calle 11-1 La Urbina Sur. Caracas, Venezuela Tel: (58 212) 240-1111 http://www.epson.com.ve
Asia and Oceania AUSTRALIA Epson Australia Pty.Ltd
3, Talavera Road North Ryde, NSW 2113, Australia Tel: 1300 361 054 http://www.epson.com.au
CHINA Epson (China) Co., Ltd. 7F, Jinbao Building, No.89 Jinbao Street, Dongcheng District, Beijing, China, 100005 Tel: (86-10) 85221199 FAX: (86-10) 85221123 Hotline: 400-810-9977 http://www.epson.com.cn
HONG KONG Epson Hong Kong Ltd. Unit 715-723, Trade Square, 681 Cheung Sha Wan Road, Cheung Sha Wan, Kowloon, HONG KONG Support Hotline: (852) 2827 8911 Fax: (852) 2827 4383 http://www.epson.com.hk
INDIA Epson India Pvt., Ltd. 12th Floor, The Millenia Tower A, No. 1, Murphy Road, Ulsoor, Bangalore 560 008 India Tel: 1800 425 0011 /1860 3000 1600 http://www.epson.co.in
Where to Get Help 76
INDONESIA PT. Epson Indonesia Wisma Kyoei Prince, 16th Floor, Jalan Jenderal Sudirman Kav. 3, Jakarta 10220, Indonesia Tel: 021-5723161 http://www.epson.co.id
JAPAN SEIKO EPSON CORPORATION TOYOSHINA OFFICE VP CS / Quality Assurance Dept. 6295 Tazawa, Toyoshina, Azumino-shi, Nagano-ken, 390-8285 Tel: 0263-87-5814 Fax: 0263-87-5813 http://www.epson.jp
KOREA EPpson Korea Co., Ltd. 11F Milim Tower, 825-22 Yeoksam-dong, Gangnam-gu, Seoul, 135-934 Korea Tel: 82-2-558-4270 Fax: 82-2-558-4272 http://www.epson.co.kr
MALAYSIA Epson Malaysia Sdn. Bhd. 3rd Floor, East Tower, Wisma Consplant 1 No.2, Jalan SS 16/4, 47500 Subang Jaya, Malaysia. Tel: 03 56 288 288 Fax: 03 56 212 088 http://www.epson.com.my
NEW ZEALAND Epson New Zealand Level 2, 7-9 Fanshawe Street, Auckland Central, 1010 New Zealand Tel: 09 366 6855 Fax 09 366 6865 http://www.epson.co.nz
PHILIPPINES Epson Philippines Co. 8th Floor, Anson's Centre, #23 ADB Avenue, Pasig City 1605, Philippines Tel: 632-7062609 Fax: 632-7062663 http://www.epson.com.ph
SINGAPORE Epson Singapore Pte. Ltd. 1 HarbourFront Place, #03-02 HarbourFront Tower 1, Singapore 098633. Tel: 6586 3111: http://www.epson.com.sg
TAIWAN Epson Taiwan Technology & Trading Ltd. 14F, No. 7, Song Ren Road, Taipei, Taiwan. Tel: (02) 8786-6688 Fax: (02) 8786-6633 http://www.epson.com.tw
Where to Get Help 77
THAILAND Epson (Thailand) Co., Ltd. 195 Empire Tower, 42nd Floor, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120, Thailand Tel: 02 685 9899 Fax: 02 685 9889 http://www.epson.co.th
Where to Get Help 78
Notices
General Specifications
Product name ELPDC12
Dimensions Open (W ^ D ^ H): 270 ^ 331 ^ 476 mm (10.6 ^ 13.0 ^ 18.7 inches) Folded (W ^ D ^ H): 340 ^ 124 ^ 125 mm (13.4 ^ 4.9 ^ 4.9 inches)
Type of sensor 1/2.7 inch CMOS sensor
Lens F=2.8
Effective pixels 2 megapixel (1920 ^ 1080)
Imaging area XGA: 29.7 ^ 41.9 cm (11.7 ^ 16.5 inches) 1080p: 29.7 ^ 52.6 cm (11.7 ^ 20.7 inches)
Focus adjustment Automatic/manual
Zoom adjustment 16x digital
Frame rate Up to 30 fps
Internal memory 1GB
Internal microphone 1 (monaural input)
Power supply AC adapter 100-240VAC 10%, 50/60Hz
ELPDC12 12VDC
Power consumption Operating: 17 W Standby: 0.48W
Operating temperature +5 to +35C (41 to 95F), non-condensing
Storage temperature -10 to +60C (14 to 140F), non-condensing
Operating humidity 20 to 80% RH, non-condensing
Storage humidity 10 to 90% RH, non-condensing
Weight Approx. 2.9 kg (6.4 lb)
Input port Computer In port 1 Mini D-Sub15-pin (female)
Mic In port 1 Stereo mini pin jack (monaural input)
Specifications 80
Output port Display Out port 1 Mini D-Sub15-pin (female) Output: SXGA/WXGA(1280x800)/WXGA(1360x768)/XGA/Full HD
Composite port 1 RCA pin jack Output: NTSC/PAL
HDMI port 1 HDMI Output: SDTV(480p)/HDTV(720p, 1080p)
Connector port USB-A port* 1 USB connector (TypeA)
USB-B port* 1 USB connector (TypeB) Output: QVGA/VGA/SVGA/SXGA/XGA
SD card slot 1 SD/SDHC card compatible
* USB 2.0 is supported. However, the operation of all USB compatible devices is not guaranteed.
Specifications 81
System Requirements These system requirements are for using the included software:
Windows: Microsoft Windows 8 32/64-bit, Windows 7 32/64-bit, Windows Vista 32-bit, Windows XP (Service Pack 3 or later)
Mac OS X: Mac OS X 10.5 to 10.8
CPU: Pentium 4 1.4 GHz or higher (Windows XP)/Pentium 4 2.4 GHz or higher (Windows Vista/Windows 7)/PowerPC G5 1.8 GHz processor or Intel Core processor
Memory: 512 MB or more
Available hard disk space: 300 MB or more of available hard disk space is required before installation
Monitor: SVGA (800 x 600) or higher resolution
This product is also designed for IT power distribution system with phase- to-phase voltage 230V.
Specifications 82
For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio and television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
WARNING The connection of a non-shielded equipment interface cable to this equipment will invalidate the FCC Certification of this device and may cause interference levels which exceed the limits established by the FCC for this equipment. It is the responsibility of the user to obtain and use a shielded equipment interface cable with this device. If this equipment has more than one interface connector, do not leave cables connected to unused interfaces. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
For Canadian Users
FCC Compliance Statement 83
According to 47CFR, Part 2 and 15 Class B Personal Computers and Peripherals; and/or CPU Boards and Power Supplies used with Class B Personal Computers
We: Epson America, Inc. Located at: 3840 Kilroy Airport Way
MS: 3-13 Long Beach, CA 90806
Telephone: (562) 290-5254
Declare under sole responsibility that the product identified herein, complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital device. Each product marketed, is identical to the representative unit tested and found to be compliant with the standards. Records maintained continue to reflect the equipment being produced can be expected to be within the variation accepted, due to quantity production and testing on a statistical basis as required by 47CFR 2.909. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Trade Name: Epson Type of Product: Document camera Model: ELPDC12
Declaration of Conformity 84
All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Seiko Epson Corporation. No patent liability is assumed with respect to the use of the information contained herein. Neither is any liability assumed for damages resulting from the use of the information contained herein.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by the purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.S.) failure to strictly comply with Seiko Epson Corporation's operating and maintenance instructions.
Seiko Epson Corporation shall not be liable against any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation.
The contents of this guide may be changed or updated without further notice.
Illustrations in this guide and the actual projector may differ.
Responsible Use of Copyrighted Materials Epson encourages each user to be responsible and respectful of the copyright laws when using any Epson product. While some countries' laws permit limited copying or reuse of copyrighted material in certain circumstances, those circumstances may not be as broad as some people assume. Contact your legal advisor for any questions regarding copyright law.
Trademarks Apple, Macintosh, and Mac OS are registered trademarks of Apple Inc.
Microsoft, Windows, Windows NT, Windows Vista, PowerPoint, and Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.
ArcSoft is a registered trademark of ArcSoft Company.
ArcSoft Application Software for Epson Document Camera 2013 ArcSoft, Inc. All rights reserved.
YouTube is a trademark of Google Inc.
SDHC Logo is a trademark of SD-3C, LLC.
HDMI and High-Definition Multimedia Interface are the trademarks or registered trademarks of HDMI Licensing LLC.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.
This information
Related manuals for Epson ELPDC12 User's Guide
en
en
de
en
fr
it
ja
sp
zh
en
sp
pt
en
fr
sp
en
sp
en
fr
en
Manualsnet FAQs
If you want to find out how the ELPDC12 Epson works, you can view and download the Epson ELPDC12 User's Guide on the Manualsnet website.
Yes, we have the User's Guide for Epson ELPDC12 as well as other Epson manuals. All you need to do is to use our search bar and find the user manual that you are looking for.
The User's Guide should include all the details that are needed to use a Epson ELPDC12. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.
The best way to navigate the Epson ELPDC12 User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.
This Epson ELPDC12 User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.
You can download Epson ELPDC12 User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.
To be able to print Epson ELPDC12 User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Epson ELPDC12 User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.