Dovre SP2 Side Panel Installation Manual PDF

Download download
Dovre SP2 Side Panel Installation Manual PDF
Dovre Manual Dovre Side Panel Manual Dovre SP2 Manual Dovre Side Panel Installation Manual
Pages 4
Year 0
Language(s)
English en
1 of 4
1 of 4

Summary of Content for Dovre SP2 Side Panel Installation Manual PDF

Page 1

Dovre Side Panels

Assembly & Installation Instructions

For use in GB, IE (Great Britain and Eire)

PM466 -Issue 1 (October 2010)

SP1, SP2 & SP3 For Use with DV-1800W/DV-2700W/DV-2000MFR

This appliance has been certified for use in countries other than those stated. To install this appliance in these countries, it is essential to obtain the translated instructions and in some cases the appliance will require modification. Contact Stovax for further information.

Page 2

AssEmBly INsTRUCTIONs

GENERAl

The three side Panel sets have been built to suit various Dovre appliances; These include the 1800 mini, 2700 standard and the 2000 super.

AR2369

1

The sP1 fits the 1800 mini The sP2 fits the 2700 standard The sP3 fits the 2000 super

Before assembling, make sure you have the correct panel set to suit your stove. If in any doubt seek the advice of your dealer.

INsTAllATION

The side panel units are designed so that they may be used with or without a Dovre base plinth fitted. This is achieved by using two sets of cut outs on each of the folded edges of the panels.

1.1 Line one of the panels up against the side of the installed appliance to determine which set of cut outs will match the contours.

AR2371

1

Folded Panel Edge

Cut Outs

1.2 The folded edge of the panels tuck behind the hinge casting flanges; The cut outs fit around the join of the hinge flange and top casting.

Note: The cut outs do not fit around the hinges of the stove.

AR2372

2 Top casting

Side Panel

Folded Panel Edge

Hinge casting flange

1.3 When the panel has been located, attach the support straps (One for SP1) at the back of one of the side panels with the fasteners provided.

2

Page 3

AR2370

2

Folded Panel Edge

Support straps

1.4 Remove the doors.

1.5 Drill 2 holes on each side just above the hinge block on the front of the flange. Ensure the hole is the correct size for the self tapping screws used.

AR2375

4

Side Panel

Folded panel edge (Located behind

hinge flange)

Drill holes behind the Hinge blocks for self tapping screws

1.6 Remove the panel from behind the flange.

1.7 Drill a clearance hole through the casting and make a counter sink hole on the front of the hinge flange.

1.8 Replace the panels and secure with the self tapping screws. 1.8 Replace the doors t

Manualsnet FAQs

If you want to find out how the SP2 Dovre works, you can view and download the Dovre SP2 Side Panel Installation Manual on the Manualsnet website.

Yes, we have the Installation Manual for Dovre SP2 as well as other Dovre manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Manual should include all the details that are needed to use a Dovre SP2. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dovre SP2 Side Panel Installation Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dovre SP2 Side Panel Installation Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dovre SP2 Side Panel Installation Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dovre SP2 Side Panel Installation Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Dovre SP2 Side Panel Installation Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.