Denon DSW-1H Owner's Manual PDF

1 of 37
1 of 37

Summary of Content for Denon DSW-1H Owner's Manual PDF

.

DSW-1H WIRELESS SUBWOOFER

Owners Manual

.

Contents Setup Use Troubleshooting Status LED Appendix

1

Introduction 4 Before your begin 5

System requirements 5 Network requirements 5 Hardware Requirements 6 Controller requirements 7

Getting to know your DSW-1H 8 Front panel 9 Controls 10 Back panel 11

Placing your DSW-1H 12 Powering your DSW-1H 13 Getting the HEOS app 14

Setting up your first DSW-1H 15 Adding more HEOS devices 16

Adding wired HEOS devices 16 Adding wireless HEOS devices 16

Connecting devices 17 Pairing a DSW-1H to a HEOS device 17

Pairing DSW-1H to DHT-S716H 17 Pairing DSW-1H to other HEOS device 18

Unpairing the DSW-1H 19

Making adjustments 20 Adjusting the Level 20 Adjusting the Low Pass Filter 20 Adjusting the Phase 21 Adjusting the status light brightness 21

Contents Setup Use Troubleshooting Status LED Appendix

2

Updating your system 22 Advanced features 23

Wireless performance 23 Power management 24

Power modes 24 Quick Start Mode 24 Deep Standby 24 Off 24

Basic troubleshooting 25 My HEOS device wont connect to my network using the audio cable 25 My HEOS device turns off and the status LED flashes in red 25 Connecting to a WPS network 26 Resetting your HEOS device 26

Status LED table 27 Supported file types and codecs 33

Specifications 34 Information 36

Trademarks 36

Contents Setup Use Troubleshooting Status LED Appendix

3

Thank you for purchasing this Denon product. To ensure proper operation, please read this owners manual carefully before using the product.

NOTE 0 THIS DOCUMENT CONTAINS INFORMATION THAT IS SUBJECT TO CHANGE WITHOUT NOTICE.

Introduction The DSW-1H is part of the HEOS wireless multi-room sound system that enables you to enjoy your favorite music anywhere and everywhere around your home. By utilizing your existing home network and the HEOS app on your iOS or Android device, you can explore, browse, and play music from your own music library or from many online streaming music services. 0 True multi-room audio - play different songs in different rooms or the same song in every room 0 Utilizes your existing home wireless network for quick and easy setup 0 Industry leading microsecond audio synchronization between HEOS device 0 Legendary Denon audio quality 0 If you are in a hurry, you can be enjoying great sounding music in no time by following the steps outlined in the Quick Start Guide (supplied).

.

DSW-1H Wireless Subwoofer

Quick Start Guide

Please continue reading this Owners Manual for more detailed information about the features and benefits of your DSW-1H.

Contents Setup Use Troubleshooting Status LED Appendix

4

Before your begin NOTE

0 If you have already installed at least one HEOS device, please skip to the section Adding more HEOS devices (v p. 16).

System requirements Before you begin installing your first HEOS device, please make sure you understand and meet a few basic requirements.

o Network requirements Wireless Router - In order to use your HEOS music system, you must have a working wireless (Wi-Fi) or ethernet network in your home. Even when connected to an Ethernet network, a Wi-Fi connection to the router is required to control the system using the HEOS Control app. If you do not have a wireless network, please contact your local Denon dealer or electronics retailer to assist you with purchasing and installing a wireless network in your home. High Speed Internet Connection - HEOS accesses the Internet to stream music to your home from many popular online music services. HEOS is also designed to provide you with software updates, which are delivered via your home Internet connection. DSL, Cable, and Fiber services will provide the best experience and reliability. You may experience performance issues with slower Internet connections like satellite based services.

Contents Setup Use Troubleshooting Status LED Appendix

5

o Hardware Requirements Use the DSW-1H together with existing HEOS devices. [Example]

.

DHT-S716H HEOS Amp HEOS speaker

NOTE 0 DSW-1H can not be used by itself.

Contents Setup Use Troubleshooting Status LED Appendix

6

o Controller requirements You can control your HEOS wireless multi-room sound system using the free HEOS app on any iOS or Android mobile device that meets these minimum requirements:

.

iOS Minimum Requirements 0 iOS version 8.0 or later 0 iPhone 4S or newer 0 iPad 2 or newer 0 iPod touch (5th generation) or newer

.

Android Minimum Requirements 0 Android OS version 4.0 or later 0 All resolutions

Contents Setup Use Troubleshooting Status LED Appendix

7

Getting to know your DSW-1H Unpack your DSW-1H from the box and verify that the following items are included:

.

DSW-1H Quick Start Guide Warranty (North America model only)

Power cordSafety instructions 1/8 inch (3.5 mm) setup cable

Ethernet cable Feet

NOTE 0 Please use the power cord included in the box for your device.

Contents Setup Use Troubleshooting Status LED Appendix

8

o Front panel

.

q

A Status LED Please refer to the Status LED table for LED color and state meaning. (v p. 27)

Contents Setup Use Troubleshooting Status LED Appendix

9

o Controls

.

wq

A Volume up/down buttons (+, ) Adjusts the HEOS devices volume level up or down.

B Mute button (:) Mutes or unmutes the HEOS devices volume.

Contents Setup Use Troubleshooting Status LED Appendix

10

o Back panel

.

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

w eq

r t y u

A AUX jack (AUX IN) Used to add the HEOS device to your wireless network. (v p. 15)

B USB port Used to connect USB storage devices.

C NETWORK connector Used to connect this unit to a wired Ethernet network. (v p. 15)

D RESET button Various settings are reset to the factory default values. (v p. 26)

E AC inlet (AC IN) Used to connect the power cord. (v p. 13)

F CONNECT button Used for Wi-Fi setup.

G Connect in status LED Indicates the status of this unit. (v p. 27)

Contents Setup Use Troubleshooting Status LED Appendix

11

Placing your DSW-1H The DSW-1H is designed to add HEOS multi-room audio functionality to an external device which offers audio amplification. You should place your DSW-1H in a convenient location near the speakers you are connecting it to. 0 The DSW-1H must be within range of your wireless network.

.

0 Attach the included feet to the four corners of the DSW-1Hs side if you are placing it on horizontally.

.

Contents Setup Use Troubleshooting Status LED Appendix

12

Powering your DSW-1H Connect the power cord included in the box to the back of the DSW-1H and the plug to a wall outlet.

.

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

for North America (AC 120 V, 60 Hz)

for Europe (AC 220 - 240 V, 50/60 Hz)

Contents Setup Use Troubleshooting Status LED Appendix

13

Getting the HEOS app The HEOS app is the heart of the HEOS experience. Using your mobile device and the HEOS app, you can setup, browse, explore, and control your HEOS system right in the palm of your hand, from anywhere in your home. Download the HEOS app for iOS or Android by searching App Store, Google Play store or Amazon for HEOS.

.

For the purpose of improvement, the specifications and design are subject to change without notice.

NOTE 0 The HEOS app and brand is not affiliated with any manufacturer of any mobile device. Availability of music services may vary by region. Not all services may be available at

time of purchase. Some services may be added or discontinued from time to time based on decisions of the music service providers or others.

Contents Setup Use Troubleshooting Status LED Appendix

14

Setting up your first DSW-1H Once you have placed your DSW-1H in your listening room and have downloaded the HEOS app, you are ready to configure your DSW-1H for music playback. This involves following a few simple steps to get the DSW-1H connected to your existing home network:

Caution 0 DO NOT connect the Ethernet cable if you are connecting your DSW-1H to a wireless network. If you are connecting the DSW-1H to a wired network,

use an Ethernet cable to connect the DSW-1H to your network or router.

1 Make sure your mobile device is connected to your wireless network (the same network you want your DSW-1H connected to). You can check this in the Settings - Wi-Fi menu of your iOS or Android device.

NOTE 0 If your wireless network is secure, make sure you know the password to join

your network.

2 Make sure you have the included 1/8 inch (3.5 mm) setup cable handy.

3 Launch the HEOS app on your mobile device.

4 Tap the Setup Now button at the top of the screen.

5 Follow the instructions to add the DSW-1H to your wireless network. The Wi-Fi settings from your mobile device will be copied to the DSW-1H via the audio cable.

NOTE 0 If you have any problems connecting your HEOS device, jump to the

Troubleshooting section. (v p. 25)

Contents Setup Use Troubleshooting Status LED Appendix

15

Adding more HEOS devices The HEOS wireless multi-room sound system is a true multiroom audio system that automatically synchronizes audio playback between multiple HEOS devices so that the audio coming from different rooms is perfectly in sync and always sounds amazing! You can easily add up to 32 devices to your HEOS system.

Adding wired HEOS devices Just connect the HEOS devices to your home network using an Ethernet cable and the HEOS devices will appear on your HEOS app as a new room in the Rooms screen. At your convenience, you can assign a name to the HEOS devices to indicate which room you have it placed in.

0 Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended). 0 Do not connect a Network Connector directly to the LAN port/Ethernet connector on your computer.

Adding wireless HEOS devices You can add additional wireless HEOS devices to your HEOS system by selecting Add Device from the HEOS apps settings menu and follow the instructions:

.

1 2 Add Device

SettingsMusic

Contents Setup Use Troubleshooting Status LED Appendix

16

Connecting devices Pairing a DSW-1H to a HEOS device

The DSW-1H needs to be paired with another HEOS device. o Pairing DSW-1H to DHT-S716H

1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu.

2 Select the DHT-S716H from "My Devices".

3 Select Setup Assistant and add the DSW-1H. Follow the instructions in the menu to complete the setup.

NOTE 0 A DSW-1H can not playback any audio unless it is paired with some other HEOS

device. 0 A DSW-1H needs to connect your wireless network before pairing.

.

HEOS 3 Left

HEOS 3 Right

HEOS Link

Denon DHT-S716H

Denon DSW-1H

Speakers

Links

Soundbars

Subwoofers

My Devices

Denon DHT-S716H

xxxxxxxx

Normal

On Table

Name

Network

EQ

Quality

Status Light

Setup Assistant

Placement

TV Input

Denon DHT-S716H

Contents Setup Use Troubleshooting Status LED Appendix

17

o Pairing DSW-1H to other HEOS device 1 Select the currently unpaired DSW-1H.

2 Select the HEOS device to be paired. The DSW-1H will be grouped together with it and will play the deep bass of the added HEOS device.

The following HEOS devices can be connected like this 0 HEOS Amp 0 HEOS Link 0 HEOS speaker

NOTE 0 A DSW-1H can not playback any audio unless it is paired with some other HEOS

device. 0 A DSW-1H needs to connect your wireless network before pairing.

.

HEOS 1 + HEOS 1

HEOS Amp

Next

Select a HEOS device to pair your Denon DSW-1H with:

Song Name 2

Song Name 1 HEOS 1 + HEOS 1

HEOS Amp

not paired-tap to conigure Denon DSW-1H

Drag one room into another to group them

Rooms

Now PlayingMusicRooms

Pair Subwoofer

Denon DSW-1H

Contents Setup Use Troubleshooting Status LED Appendix

18

Unpairing the DSW-1H 1 Tap the pencil e icon in the upper right corner of the

"Rooms" menu.

2 Tap the HEOS device from which to unpair the DSW-1H.

3 Select "Disconnect Wireless Subwoofers"

.

HDMI InMusicDenon DHT-S716H

Denon DHT-S716H

Drag one room into another to group them

Rooms

HEOS 3 Left

HEOS 3 Right

HEOS Link Disconnect Wireless Subwoofers

Name Denon DHT-S716H

Edit Group

Disconnect Wireless Surrounds

Contents Setup Use Troubleshooting Status LED Appendix

19

Making adjustments You can adjust specific settings for each of your HEOS device in your system:

1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu.

2 Select My Devices to display a list of your HEOS devices.

3 Select the HEOS device you want to adjust.

Adjusting the Level 1 Select Level.

2 Adjust the level up or down to compensate for the subwoofer output level.

0 You can also configure settings by tapping S in the Now Playing screen.

Adjusting the Low Pass Filter 1 Select Low Pass Filter.

2 Set the frequency cutoff point.

Optimized (recommended)

Select when using with HEOS speakers. Optimized values are set to each of the speakers.

40Hz - 250Hz (for experts)

When using with other speakers, configure settings that match the characteristics of the combined speakers.

Contents Setup Use Troubleshooting Status LED Appendix

20

Adjusting the Phase 1 Select Phase.

2 Select Normal (default) or 180.

0 For normal configuration, use Normal. 0 The bass volume may increase when switched to 180 due to the installation

location of the Subwoofer.

Adjusting the status light brightness 1 Select Status Light.

2 Adjust the brightness up or down or set the slider to the OFF position to completely disable the status light.

Contents Setup Use Troubleshooting Status LED Appendix

21

Updating your system HEOS has the ability to add enhancements and updated functionality via your high speed Internet connection. Follow the instructions on the screen to update the HEOS device and/or your controller App.

1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu.

2 Select Software Update.

n Check for Update Follow the instructions on screen to install any available updates to your HEOS system.

n Auto-Update ON (Default):

Valid updates are performed automatically.

OFF: You will be notified of valid updates on the HEOS app.

Contents Setup Use Troubleshooting Status LED Appendix

22

Advanced features There are a few advanced features of the HEOS system that you may want to explore once you become familiar with the basic operations. You can access the advanced features of the HEOS system by following these steps:

1 Select the Settings a icon located in the upper left corner of the main Music menu to display the Settings menu.

2 Select Advanced Settings to display a list the available settings.

Wireless performance You can check the wireless connection status of your HEOS device.

n Quality Excellent / Good / Poor

NOTE 0 If the quality level of your HEOS device is Poor, make sure your HEOS devices

are not located near other electronic devices that could interfere with its wireless connectivity (like microwave ovens, cordless phones, TVs, etc)

n Signal Excellent / Good / Poor

NOTE 0 If the signal level of your HEOS device is Poor, make sure your HEOS devices

are within range of your wireless network.

Contents Setup Use Troubleshooting Status LED Appendix

23

Power management Power modes o Quick Start Mode

To save power, the device will automatically enter Quick Start Mode whenever there is no network access or playback for 20 minutes and will automatically resume to full power whenever the device is selected and playing music. The status LED dims when the mode is switched to Quick Start Mode.

o Deep Standby The device also has the ability to automatically enter Deep Standby whenever the wired and wireless network connections are removed for more than 60 minutes in Quick Start Mode. Status LED will turn off during Deep Standby. To wake a HEOS device from Deep Standby, you must press the volume or mute buttons which will immediately turn on the front panel LED.

NOTE 0 Please note that the HEOS cannot be operated as intended when in Deep

Standby as there is no network connection.

o Off To completely turn off the power to the device you must remove the mains plug from the power outlet.

Contents Setup Use Troubleshooting Status LED Appendix

24

Basic troubleshooting My HEOS device wont connect to my network using the audio cable

Solution Refer to Page 0 Make sure your mobile device is connected to your wireless network before setting up your device. 15 0 Alternatively, you can connect your device to your network router using the included Ethernet cable. Once connected via

Ethernet, the HEOS App should recognize the device and you can manually move it to your wireless network using Settings/My Devices/Device_Name/Advanced/Network Settings.

16

My HEOS device turns off and the status LED flashes in red Solution Refer to Page

0 The protection circuit has been activated due to a rise in temperature within your HEOS device. Turn the power off, wait about an hour until this device cools down sufficiently, and then turn the power on again.

Contents Setup Use Troubleshooting Status LED Appendix

25

Connecting to a WPS network Solution Refer to Page

0 If your wireless router support WPS (Wi-Fi Protected Setup) your HEOS wireless device can optionally connect to your network using the Push Button method by following these steps:

Wi-Fi Protected Setup is trademarks of Wi-Fi Alliance. 1. Press the WPS button on your router. 2. Within 2 minutes, press and hold the Connect button on the rear panel of the HEOS device for 3 seconds. 3. The LED on the front of the device will flash green for several seconds as it connects to your WPS router. 4. When the connection is complete, the LED on the front of the device will turn solid blue.

5

Resetting your HEOS device Solution Refer to Page

0 Resetting your HEOS device will clear out the wireless network info, EQ, and name but retain its current software. You will have to use Settings - Add Device to reconnect the HEOS device to your home network before it can be used. To reset your HEOS device, press and hold the RESET buttons located on the back of the HEOS device for 5 seconds until the front LED begins to flash amber.

Contents Setup Use Troubleshooting Status LED Appendix

26

Status LED table Device Operation Description Front LED Action Rear LED Action

Off No AC power or Deep Standby .

(off) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Plug in Booting .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

On Ready-Configured and connected to your network .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

On Not Connected to your network .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Change Network Connecting to your network .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Contents Setup Use Troubleshooting Status LED Appendix

27

Device Operation Description Front LED Action Rear LED Action

Setup

Not connected .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Connect button was pressed .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(blink)

Cable connection is OK .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Connecting to your network .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Contents Setup Use Troubleshooting Status LED Appendix

28

Device Operation Description Front LED Action Rear LED Action

Setup

Configured and connected to your network .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Error .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Update

Updating .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(blink)

Rebooting .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Ready-Configured and connected to your network .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Contents Setup Use Troubleshooting Status LED Appendix

29

Device Operation Description Front LED Action Rear LED Action

Reset

Soft reset - Clear user settings .

(fast blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Hard reset - Factory restore .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Rebooting .

(blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Ready-Not Configured .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Contents Setup Use Troubleshooting Status LED Appendix

30

Device Operation Description Front LED Action Rear LED Action

Errors

Firmware Error .

(slow blink (NOT fade)) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Hardware Error .

(fast blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Network Error .

(solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Contents Setup Use Troubleshooting Status LED Appendix

31

Device Operation Description Front LED Action Rear LED Action

WPS

a WPS session is active .

(fast blink) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(fast blink)

WPS connected .

(for 3 sec. solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

WPS time-out .

(for 3 sec. solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(solid)

Power Management

Quick Start Mode .

(dimmed solid) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Deep Standby .

(off) .

AUX IN 5V/1A---

USB

RESET CONNECT

NETWORK

AC IN

(off)

Contents Setup Use Troubleshooting Status LED Appendix

32

Supported file types and codecs Frequency Sample Rate File Extension Codec Bit Rates

32/44.1/48 88.2/96/176.4 192 kHz

16/24 bit wav PCM ---

32 kHz 44.1 kHz 48 kHz

16 bit mp3 MPEG-1 Audio Layer 3 CBR/VBR 32 - 320 kbps

32 kHz 44.1 kHz 48 kHz

16 bit m4a aac AAC-LC 48 - 320 kbps

32 kHz 44.1 kHz 48 kHz

16 bit wma wma9 CBR CBR:48 - 192 kbps

44.1/48 88.2/96/176.4 192 kHz

16/24 bit flac flac ---

44.1/48 88.2/96/176.4 192 kHz

16/24 bit m4a ALAC ---

2.8/5.6 MHz 1 bit dff dsf

DSDIFF DSF ---

NOTE 0 Files protected by DRM such as Apples Fairplay DRM, are not supported. 0 The ALAC decoder is distributed under the Apache License, Version 2.0 (http://www.apache.org/licenses/LICENSE-2.0)

Contents Setup Use Troubleshooting Status LED Appendix

33

Specifications o Wireless LAN section

Network type: Conforming to IEEE 802.11a/b/g/n/ac Used frequency range: 2.4 GHz, 5 GHz

o General Operating temperature: 41 F - 95 F (5 C - 35 C) Power supply: AC 120 V, 60 Hz (for North America)

AC 220 - 240 V, 50/60 Hz (for Europe) Power consumption: 70 W Power consumption in Quick Start Mode: 4.5 W Power consumption in Deep Standby Mode: 0.3 W

Contents Setup Use Troubleshooting Status LED Appendix

34

o Dimensions (Unit : in. (mm))

.

15 7

/8 (

40 3)

16 (

40 4)

17 3/8 (439)6 7/8 (172)

o Weight : 22 lbs 4 oz (10.1 kg) For the purpose of improvement, the specifications and design are subject to change without notice.

Contents Setup Use Troubleshooting Status LED Appendix

35

Information Trademarks

.

Google Play and the Google Play logo are trademarks of Google LLC.

.

Apple, the Apple logo, iPad, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store

Manualsnet FAQs

If you want to find out how the DSW-1H Denon works, you can view and download the Denon DSW-1H Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Denon DSW-1H as well as other Denon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Denon DSW-1H. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Denon DSW-1H Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Denon DSW-1H Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Denon DSW-1H Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Denon DSW-1H Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Denon DSW-1H Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.