Denon ASD-3W Firmware Update PDF

1 of 3
1 of 3

Summary of Content for Denon ASD-3W Firmware Update PDF

Page 1 of 3 Questions or problems, please call Denon USA Customer Support @ 800-497-8921

ASD-3N/W FIRMWARE UPDATE AVAILABLE

There is now a firmware update available through our DPMS (Denon Product Management Server) for the ASD-3N and ASD-3W Network Client iPod Docks USA and Canada models only. These updates allow Denon to address certain operating issues, as well as adding new features and functionality. The update corrects the following issues:

1. The playback of Net Audio stops when a jpeg image is displayed. 2. When displaying a jpeg image, then selecting Net Audio, no audio is output. 3. Unit re-initializes when empty Video Podcast is selected from any iPod. 4. When Audio Book from an iPod is selected, another song is played. 5. The file of an artist that has not been selected is displayed when watching videos from the iPod. 6. When connecting the ASD-3N/W to compatible Denon AVRs with Dock Control, FF/REW from the remote

control and the iPod buttons do not function. 7. The Slide Show function does not operate correctly. 8. GUI does not timeout when set to do so. 9. The FL display of Denon AVRs displays incorrect title information when connected via Dock Control in

Remote Mode. 10. WAV files with Japanese titles cannot be displayed. 11. ASD-3W cannot accept 26-bit WEP encryption key 12. Regarding new specifications of the new iPod nano 3G and iPod Classic, there is no video or photo output in

Browse or Remote Modes. a. Latest firmware corrects video/photo playback in either mode, however Browse Mode still does not

function with material purchased from the iTunes Store due to bugs in the nano 3G and Classic awaiting update from Apple. NOTE: Apple has corrected this in the latest update (ver1.0.3) for the iPod Classic and nano 3G. When syncing with iTunes you will be asked to update your unit, please follow the update instructions within iTunes.

13. Regarding new specifications of the iPhone and new iPod Touch, there is no video or photo output in Browse or Remote Modes.

a. Latest Firmware corrects Remote Mode playback, however Browse Mode does not work due to new Apple specification and it is unknown if Apple will ever change this

14. Album Art from nano 3G and Classic is not displayed properly. 15. Units reset themselves with iPhone and iPod Touch when playback of Audio files with Album Art.

NOTE: See breakdown chart on page 3, regarding capabilities and functionality with Denon Docks and the new Apple products.

To update the firmware, please follow the instructions below. These instructions are the same for all future firmware updates regarding the ASD-3N/W:

1. Remove then replace the main AC power cord to the ASD-3N/W. a. We recommend using an Ethernet cable for the updates with the ASD-3W, as Wi-Fi signal dropouts

and network usage can cause failure of the updating process. 2. With unit powered back on, verify Internet connectivity, this can be done by selecting Internet Radio and

accessing a station for playback. a. If Internet Radio cannot be accessed, then check all network settings and connections.

3. In the ASD-3N/W GUI, select Setup then Other. Now select Firmware Update, then Start, followed by the Enter key. An on screen confirmation will appear saying, Now Updating. During the process, screen will go blank for several minutes. Do not turn off.

a. The GUI will disappear, however the main power indicator on the front of the unit will remain on.

Page 2 of 3 Questions or problems, please call Denon USA Customer Support @ 800-497-8921

4. Approximant update time is 5 to 10 minutes the length of time is dependent on the DPMS server and the speed of the your local network environment.

5. Once updating is complete, the unit will automatically restart and the GUI will appear. 6. Remove then replace the main AC power cord. Turn on and enjoy.

To verify the updated firmware version, please check the following:

In the ASD-3N/W GUI, go to Setup, then Network, then to Network Info. Write down the IP address shown. On any PC connected to the LAN (local network), open an Internet Browser (IE, FireFox etc) and type in the IP address written down from the ASD-3N/W. A Status Information page will open and show the following details of a successful update: Firmware Date: 2007-11-21 Firmware Version: 7007

Any questions or problems, please contact the Denon USA Factory Service Department at 1-800-497-8921

Page 3 of 3 Questions or problems, please call Denon USA Customer Support @ 800-497-8921

Denon iPod Docks Compatibility Chart with New Apple Products (Please Note: All pr

Manualsnet FAQs

If you want to find out how the ASD-3W Denon works, you can view and download the Denon ASD-3W Firmware Update on the Manualsnet website.

Yes, we have the Firmware Update for Denon ASD-3W as well as other Denon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Firmware Update should include all the details that are needed to use a Denon ASD-3W. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Denon ASD-3W Firmware Update is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Denon ASD-3W Firmware Update consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Denon ASD-3W Firmware Update free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Denon ASD-3W Firmware Update, simply download the document to your computer. Once downloaded, open the PDF file and print the Denon ASD-3W Firmware Update as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.