Denon DBP-A100 Owner's Manual PDF

1 of 71
1 of 71

Summary of Content for Denon DBP-A100 Owner's Manual PDF

UNIVERSAL AUDIO / VIDEO PLAYER

DBP-A100

Graphical User Interface

English

Use this manual in combination with the operating guide displayed on the GUI screen.

GUI Menu Operation (vpage 22)

Franais

Utilisez ce manuel en mme temps que le guide dutilisation affich sur lcran GUI (Interface graphique).

Fonctionnement du menu de linterface graphique GUI (vpage 22)

Espaol

Utilice este manual conjuntamente con la gua de uso que aparece en la pantalla GUI.

Uso de los mens GUI (vpgina 22)

Owners Manual

Manuel de lUtilisateur

Manual del usuario

b Button illustrations used in this manual for operation explanation are for the Remote Control Unit. You can operate the unit using the button of the same name on the front panel of the unit.

b Les illustrations des boutons prsentes dans ce manuel servent expliquer le fonctionnement de la tlcommande. Vous pouvez contrler lappareil laide du bouton portant le mme nom sur la faade de lappareil.

b Las ilustraciones de los botones utilizadas en este manual con propsitos de explicacin son para la unidad del mando a distancia. Puede operar la unidad utilizando el botn del mismo nombre en el panel delantero de la unidad.

1.DBP-A100_E3_ENG_007.indd 1 2010/08/12 19:20:01

I

n SAFETY PRECAUTIONS

CAUTION RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

, CLASS 1

LASER PRODUCT ,

,,

CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. THIS PRODUCT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT PROPERLY QUALIFIED SERVICE PERSONNEL.

n Laser Class (IEC 60825-1:2001)

IMPOTANT SAFETY INSTRUCTIONS

1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8. Do not install near any heat sources such as radiators, heat registers,

stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A

polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11. Only use attachments/accessories specified by the manufacturer. 12. Use only with the cart, stand, tripod, bracket, or table

specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

15. Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: Theventilationshould not be impeded by covering the ventilation

openings with items, such as newspapers, tablecloths, curtains, etc.

No naked flame sources, such as lighted candles, should be placed on the unit.

Observeandfollowlocalregulationsregardingbatterydisposal. Donotexposetheunittodrippingorsplashingfluids. Donotplaceobjects filled with liquids, such as vases, on the unit.

ATTENTION: Laventilationnedoitpastregneenrecouvrantlesouvertures

de la ventilation avec des objets tels que journaux, rideaux, tissus, etc.

Aucuneflammenue,parexempleunebougie,nedoittreplace sur lappareil.

Veillezrespecterlesloisenvigueurlorsquevousjetezlespiles usages.

Lappareilnedoitpastreexposleauoulhumidit. Nepasposerdobjetcontenantduliquide,parexempleunvase,

sur lappareil.

PRECAUCIN: Laventilacinnodebequedarobstruidaporhabersecubiertolas aperturasconobjetoscomoperidicos,manteles,cortinas,etc.

Nodebecolocarsesobreelaparatoningunafuenteinflamablesin proteccin,comovelasencendidas.

Alahoradedeshacersedelaspilas,respetelanormativaparael cuidado del medio ambiente.

Noexponerelaparatoalgoteoosalpicadurascuandoseutilice. Nocolocarsobreelaparatoobjetosllenosdelquido,comojarros.

CAUTION: To completely disconnect this product from the mains, disconnect the plug from the wall socket outlet. The mains plug is used to completely interrupt the power supply to the unit and must be within easy access by the user.

PRECAUTION: Pour dconnecter compltement ce produit du courant secteur, dbranchezlaprisedelaprisemurale. La prise secteur est utilise pour couper compltement lalimentation de lappareil et lutilisateur doit pouvoir y accder facilement.

PRECAUCIN: Paradesconectarcompletamenteesteproductodelaalimentacin elctrica,desconecte el enchufe del enchufe de la pared. Elenchufedelaalimentacinelctricaseutilizaparainterrumpirpor completoelsuministrodealimentacinelctricaalaunidadydebe de encontrarse en un lugar al que el usuario tenga fcil acceso.

The serial number of this productmaybe foundon thebackof theunit.No others have the same serial number as yours. You should record the number and other vital information here and retain this book as a permanent record of your purchase to aid identification in case of theft.

Date of Purchase Dealer Purchase from Dealer Address DealerPhoneNo. ModelNo. SerialNo.

ENGLISHFRANCAISESPAOL

1.DBP-A100_E3_ENG_007.indd 3 2010/08/12 19:20:02

II

Avoidhightemperatures. Allow for sufficient heat dispersion when

installed in a rack. Eviterdestempraturesleves. Tenir compte dune dispersion de chaleur

suffisante lors de linstallation sur une tagre.

Evitealtastemperaturas. Permite la suficiente dispersin del calor

cuando est instalado en la consola.

Handlethepowercordcarefully. Hold the plug when unplugging the cord. Manipuler le cordon dalimentation avec prcaution.

Tenir la prise lors du dbranchement du cordon.

Manejeelcordndeenergaconcuidado. Sostenga el enchufe cuando desconecte el cordndeenerga.

Keep the unit free frommoisture,water, and dust.

Protger lappareilcontre lhumidit, leau et la poussire.

Mantenga el equipo libre de humedad, agua y polvo.

Unplugthepowercordwhennotusingthe unit for long periods of time.

Dbrancher le cordon dalimentation lorsquelappareilnestpasutilispendant delonguespriodes.

Desconecte el cordn de energa cuando no utilice el equipo por mucho tiempo.

* (For apparatuses with ventilation holes)

Donotobstructtheventilationholes. Nepasobstruerlestrousdaration. Noobstruyalosorificiosdeventilacin.

Donotletforeignobjectsintotheunit. Ne pas laisser des objets trangers dans

lappareil. No deje objetos extraos dentro del

equipo.

Do not let insecticides, benzene, and thinner come in contact with the unit.

Nepasmettreencontactdesinsecticides, du benzne et un diluant avec lappareil.

No permita el contacto de insecticidas, gasolina y diluyentes con el equipo.

Never disassemble or modify the unit in any way.

Nejamaisdmonteroumodifierlappareil dune manire ou dune autre.

Nuncadesarmeomodifiqueelequipode ninguna manera.

n NOTE ON USE / OBSERVATIONS RELATIVES A LUTILISATION / NOTAS SOBRE EL USO

FCC INFORMATION (For US customers)

1. PRODUCT This product complies with Part 15 of the FCC

Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation.

2. IMPORTANT NOTICE: DO NOT MODIFY THIS PRODUCT

This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modification not expressly approved byDENONmayvoidyourauthority,grantedbythe FCC, to use the product.

3. NOTE This product has been tested and found to comply

with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures: Reorientorrelocatethereceivingantenna. Increase theseparationbetween theequipment

and receiver. Connect the product into an outlet on a circuit

different from that to which the receiver is connected.

Consult the local retailer authorized todistribute this type of product or an experienced radio/TV technician for help.

This Class B digital apparatus complies with Canadian ICES-003. Cetappareilnumriquede laclasseBestconforme la normeNMB-003duCanada.

n Copyrights / Droits dauteur / Derechos de Autor It isprohibitedby lawtoreproduce,broadcast,

rent or play discs in public without the consent of the copyright holder.

Lareproduction,ladiffusion,lalocation,leprt ou la lecture publique de ces disques sont interdits sans le consentement du dtenteur des droits dauteur.

De acuerdo con las leyes est prohibido reproducir, emitir, alquilar o interpretar discos en pblicosinlaautorizacindelpropietariodelos derechos de autor.

n CAUTIONS ON INSTALLATION PRCAUTIONS DINSTALLATION EMPLAZAMIENTO DE LA INSTALACIN

z z

z

Wall Paroi Pared

z

zFor proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. More than 0.1 m (4 in.) is recommended. Do not place any other equipment on this unit. zPour permettre la dissipation de chaleur requise, ninstallez pas cette unit dans un espace confin tel quune bibliothque ou un endroit similaire. Une distance de plus de 0.1 m (4 po) est recommande. Neplacezaucunmatrielsurcetappareil. zPara la dispersin del calor adecuadamente, no instale este equipo en un lugar confinado tal como una librera o unidad similar Se recomienda dejar ms de 0.1 m (4 pulg.) alrededor. Nocoloqueningnotroequiposobrelaunidad.

ENGLISH FRANCAIS ESPAOL

1.DBP-A100_E3_ENG_007.indd 4 2010/08/12 19:20:03

ENGLISH

1

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Contents

Features 2

Getting Started

Accessories 2 Cautions on Handling 3

Cautions on Installation 3 About Media 3

Playable Media 3 Cautions on Using Media 6

About the Remote Control 7 Inserting the Batteries 7 Operating Range of the Remote Control 7 Remote Control Settings (Remote Control Side) 7

Part Names and Functions 8 Front Panel 8 Display 8 Rear Panel 9 Remote Control 10

Connections

Preparation 12 Connecting Cables 12

1. Home Theater Playback Playing on a Multi-channel System 13 Using an HDMI Cable to Connect to an AV Amp or Television 13 Required Settings for HDMI Connection 13 Connecting to an AV Amp with No HDMI Audio Input 15 Connecting to a Device with an Analog Multi-channel Audio Input Terminal 16 DENON LINK Connection q Making a Jitter-free Connection 17 DENON LINK Connection w Making a Normal Connection 17 Connecting to an AV Amp with No HDMI Video Input 17

2. Playing with a Direct Connection to a TV 18 3. Playing Back 2-Channel Audio 18

Connecting to a Device with Analog 2-channel Audio Input Terminals with a Stereo Pin Plug Cable 18

4. Recording a CD 19 Connecting to a Digital Recording Device 19

5. Using BD-LIVE function or updating the software version of DBP-A100 19

Connecting to a Network 19 Connecting the Power Cord 20 Once Connections are Complete 20

Turning the Power On 20

GUI Menu Setup

Menu Map 21 GUI Menu Operation 22

Examples of GUI Menu Screen Displays 22 Language Setup 23 HDMI Setup 23 Video Setup 24 Audio Setup 25 DENON LINK Setup 28 Pure Direct Setup 28 Ratings 29 Network Setup 29 Display Setup 30 Other Setup 31

Various Settings

Setting the Audio Mode 32 Changing the Playback File Display 32 Making Other Settings 32 Adjusting the Picture Quality (Picture Control) 33

Playback

Introduction 34 Before Playing a Disc 34 Before Playing an SD Memory Card 34

About Playback Information 34 Information Bar Display 34 Media Player Display 35

Playing BDs and DVD-Videos 36 Playing Super Audio CDs 37 Playing CDs 37 Playing DVD-Audio 37 Playing High-Quality Audio (Pure Direct Function) 38 Playing Files 38

Playing Files 39 Screen Display During Playback 40 Operation During Playback 40

Operations Enabled During Playback 41 Pausing 41 Stopping (Resume Function) 41 Skipping to a Desired Chapter/Track/File 41 Finding Specific Sections with Search Modes 42 Memorizing Locations to Replay (Marker Function) 43 Fast-Forward/Fast-Reverse 43 Playing Images Frame by Frame 43 Slow-Forward/Slow-Reverse Playback 43 Playing in Random Order (Random Playback) 44 Playing Repeatedly (Repeat Playback) 44 Playing Repeatedly Between Specified Points (A-B Repeat) 44 Playing in Your Preferred Order (Program Playback) 45 Switching Audio 45 Changing the Subtitles and Subtitle Style 46 Switching the Angle 47

Changing the Brightness of the Display (Dimmer Control) 47 Web control function 47

HDMI Control Function 49

About DENON LINK 50 About Advanced AL24 Processing 50 About Copyright Protection Technology 50 Trademark Information 50 Language Code List 51 Country Code List 52 Explanation of Terms 53 Index 54

Troubleshooting 55

Specifications57

Other Information

1.DBP-A100_E3_ENG_007.indd 1 2010/08/12 19:20:03

ENGLISH

2

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifi cations

Features

A Universal Blu-ray Disc player that plays Super Audio CD and DVD-Audio formats vpage 3, 4 Playable Media

Jitter-free transmission thanks to a fusion of DENON LINK 4th generation and HDMI transmission technology In addition to multi-channel, digitally balanced transmission of Super Audio CD achieved in 3rd generation, DENON LINK 4th generation provides jitter control functionality during digital signal transmission.(described as 3rd or 4th in the following sentences) vpage 17 DENON LINK Connection q Making a Jitter-free Connection

Equipped with Dolby TrueHD, DTS-HD Master Audio decoder Compatible with Linear PCM 192 kHz (one of the BD audio formats) and multi-channel output (6-ch). vpage 16 Connecting to a Device with an Analog Multi- channel Audio Input Terminal

Equipped with Advanced AL24 Processing on all channels to enhance HD audio performance Detailed picture rendering with minimal distortion; accurate sound location and rich bass. Achieves playback more faithful to the original sound on all channels.

GUI equipped for excellent operability and visibility vpage 22 GUI Menu Operation

HDMI control ready vpage 49 HDMI Control Function

Newly developed S. V. H. Mechanism with low center of gravity, vibration damping, quietness and high accuracy

Employs 6-block construction to eliminate both electrical and magnetic interference

Check that the following parts are supplied with the product.

q Owners manual ...................................................................... 1 w Service station list ................................................................... 1 e Power cord (Cord length: Approx. 5.9ft/1.8m) ....................... 1 r Remote control (RC-1140) ...................................................... 1 t R6/AA batteries ....................................................................... 2 y DENON LINK cable (Cord length: Approx. 4.9ft/1.5 m) .......... 1 u Audio cable (Cord length: Approx. 4.9ft/1.5m) ....................... 1 i Video cable (Cord length: Approx. 4.9ft/1.5m) ....................... 1 o Warranty (for North America model only) ............................... 1

Thank you for purchasing this DENON product. To ensure proper operation, please read this owners manual carefully before using the product. After reading the manual be sure to keep it for future reference.

Accessories

Getting Started

G etting S

tarted

e r

uy i

1.DBP-A100_E3_ENG_007.indd 2 2010/08/12 19:20:04

ENGLISH

3

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections S

pecifications

Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables.

Power is supplied to some of the circuitry even when the unit is set to the standby mode. When leaving home for long periods of time, be sure to unplug the power cord from the power outlet.

Image persistence (image burn-in) Do not leave still images of the disc menu, DBP-A100 menu, etc., displayed on the TV screen for long periods. This can result in image persistence (image burn-in) on the screen.

About Condensation If the DBP-A100 unit is moved from a cold place to a warm place, or installed in a room subject to rapid temperature rise from a heater, etc., condensation may form on parts inside the unit (operating parts and lenses). If used under this condition, the DBP-A100 will not operate correctly and damage may result. If condensation forms on the unit, leave the DBP-A100 off for 1 to 2 hours before using it again.

Cautions on using mobile phones Using a mobile phone near this unit may result in noise. If that occurs, move the mobile phone away from the unit when it is in use.

Moving the unit Be sure to remove a disc, turn off the power and unplug the power cord from the power outlet. Next, disconnect the connection cables to other system equipment before moving the unit.

About Care Wipe the cabinet and control panel clean with a soft cloth. Follow the instructions when using a chemical cleaner. Benzene, paint thinner or other organic solvents, as well as

insecticide, may cause material changes and discoloration if brought into contact with the unit, and should, therefore, not be used.

Proper Ventilation If the unit is left in a room full of the smoke from cigarettes, etc., for long periods of time, the surface of the optical pickup may get dirty, preventing it from receiving signals inproperly.

Note that for explanatory purposes the illustrations in these instructions may differ from the actual unit.

Cautions on Handling About Media

Playable Media

Playable Media Playable formats/ modes

Playable region codes

Symbols Used in this

Owners Manual

BD-Video z1,z2

Discs with

BD

DVD-Audio z1

DVD-A

DVD-Video z1,z2

Include region

ALL 1 DVD-V

DVD-R, DVD+R

Video mode, AVCHD format

DVD DVD-RW, DVD+RW

Super Audio CD

SA-CD

CD

CDCD-R

CD-RW

Discs

z1 : BD-Video/DVD-Audio/DVD-Video discs may not operate as described in this manual due to menu structure.

z2 : BD players and BD-Video discs, and DVD players and DVD- Video discs each have their region codes (codes assigned for each region). Playback is not possible if the codes do not match.

G etting S

tarted

See overleaf

1.DBP-A100_E3_ENG_007.indd 3 2010/08/12 19:20:04

ENGLISH

4

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

NOTE A disc may not be accessible or may play incorrectly due to audio

and video interruptions, etc., depending on the recording conditions when recorded with a BD recorder or DVD recorder.

Unfinalised DVD-R/-RW/+R/+RW, and CD-R/-RW discs may not play back. Finalize discs before playing.

The following discs will not play back on this unit.

SD Memory Cards

Playable cards

Symbols Used in this

Owners Manual

Playable files (Symbols Used in this

Owners Manual)

SD Memory Cards z1 (8 MB ~ 2 GB)

SD

MP3 WMA AAC LPCM JPEG DivX

Data recorded for BD BONUS VIEW use

See Files in Playable Media (vpage 4) for more information on files.

SDHC Memory Cards z1 (4 GB)

miniSD Cards z2 (8 MB ~ 2 GB)

microSD Cards z2 (8 MB ~ 2 GB)

z1 : This unit supports SD Memory Cards with FAT16 file systems, and SDHC Memory Cards with FAT32 file systems.

z2 : MiniSD cards and microSD cards require adapters.

miniSD Card Adapter

miniSD Card

microSD Card Adapter

microSD Card

NOTE This unit does not support mini SDHC and micro SDHC Memory

Cards. Insert or remove your SD Memory Card while the power is in

standby. If you insert a SD Memory Card while the power is ON, the SD Memory Card may not be read.

The SD card used for the Bonus View function must have a capacity of 1GB or greater. Also the SD card must be initialized on the DBP- A100 (vpage 31).

Files

Playable files

(Extension)

Playable Media

File specification

Symbols Used in this

Owners Manual

DVD-R/ -RW/

+R/+RW CD-R/-RW

DVD CD

SD Memory

Cards SD

MP3 (.mp3)

S S

Sampling frequency: 44.1 kHz, 48 kHz

Bit rate: 64 kbps ~ 320 kbps (144 kbps non-compatible)

Audio type: MPEG 1 Audio Layer 3

MP3

WMA z (.wma)

S S

Sampling frequency: 44.1 kHz, 48 kHz

Bit rate: 48 kbps ~ 192 kbps

Audio type: WMA Version 9

WMA

AAC z (.m4a)

S S

Sampling frequency: 44.1 kHz, 48 kHz

Bit rate: 64 kbps ~ 192 kbps (Variable Bit Rate non compatible)

Audio type: AAC

AAC

LPCM (.wav)

S S

Sampling frequency: 44.1 kHz, 48 kHz

Bit length: 16 bit Number of channels: 2-ch

LPCM

JPEG (.jpg/.jpeg)

S S

Maximum resolution: 4,096 x 4,096 pixels

Minimum resolution: 32 32 pixels

Maximum file size: 12 MB

JPEG

DivX

(.avi/.divx) S S

Compatible versions: Up to DivX 6

Maximum size: 2 GB DivX

z : This unit cannot play files recorded under DRM (Digital Rights Management) other than DivX files.

The abovementioned file type may also fail to play back depending on conditions at the time of recording.

If characters not supported on the menu screen are included in a file name, title, artist name or album title, they will not display correctly.

JPEG images stored in the progressive format cannot be viewed.

BD-RE Ver1.0 (BD disc with cartridge) BD-ROM/BD-R/BD-RE discs containing recorded movie, still image,

audio, and/or other, files BD-R/BD-RE in which BDMV/BDAV is recorded HD DVD DVD-RAM CDV (Only the audio part can be played) CD-G (Only the audio signals can be output) Non-standard CD (CD with copy protection, etc.) Unauthorised disc (Pirated disc) Disc with recording area less than 55 mm in diameter Video Single Disc (VSD) / CVD/ Video CD / Super Video CD /

CompactDisc-Interactive (CD-I) / Photo CDs

About MediaG etting S

tarted

1.DBP-A100_E3_ENG_007.indd 4 2010/08/12 19:20:04

ENGLISH

5

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections S

pecifications

About Media

About DivX Video-on-Demand (VOD)

When you purchase or rent a DivX file through the official site of DivX Video-On-Demand (VOD) services, a DBP-A100 registration code is required. For details, see DivX Registration (vpage 29).

A DivX VOD file recorded with a different code from the DBP-A100 registration code cannot be played back.

Some DivX VOD files are restricted to a certain number of playable times. If your DivX VOD file has such a limit, the number of playable times is displayed on the DivX VOD display screen.

Use to select Yes if you want to play a file, or to select No if you do not want to play it. Then, press

to confirm the selection.

About Discs and Files

n BD-Video, DVD-Video BD/DVD-Video discs are divided into several large sections (titles) and small sections (chapters). These sections are all allotted numbers, called title numbers and chapter numbers.

GExampleH BDDVD

1 1 2 1 2 3

2

n Super Audio CD GType of Super Audio CDH

Single layer disc

Single layer Super Audio CD with only an HD layer z.

Dual layer disc

Super Audio CD with a double HD layer z, offering extended playing time and high sound quality.

Hybrid disc

Two-layer Super Audio CD with an HD layer z and a CD layer. The signals on the CD layer can be played on a regular CD player.

CD layer

HD layer

HD layer

HD layer

z : All Super Audio CDs contain an HD (High Density) layer with high density Super Audio CD signals. This layer can contain a stereo channel area, a multi-channel area, or both a stereo channel and multi-channel area.

n CD CDs are divided into several sections (tracks). These sections are all allotted numbers called track numbers.

n File MP3/WMA/AAC/LPCM/JPEG/DivX files recorded on DVD-R/- RW/+R/+RW, CD-R/-RW and SD Memory Card are divided into large segments (folders) and small segments (files). Files are stored in folders, and folders can be placed for storage in a hierarchy. The DBP-A100 can recognize up to 8 levels of folders.

SDMemory Card

DVD-R/-RWCD-R/-RWSD

File1 File2 File3 Folder3

1st level

2nd level

3rd level

File4 File5 File6 File7

Folder1 Folder2

Track1 Track2 Track3 Track4 Track5

Title1 Title2 Chapter 3

B ,

Chapter 2Chapter 1Chapter 2Chapter 1

DVD-R/-RW/+R/+RW, CD-R/-RW or SD Memory Card

OK

DivX Authorization Error

Authorization Error. This player is not authorized to play this video.

Yes No

DivX Rental

View DivX(R) VOD Rental This rental has 3 views left.

Do you want to use one of your 3 views now?

When writing MP3/WMA/AAC/JPEG/DivX files on a CD-R/-RW disc, set the writing softwares format to ISO9660. The files may not play properly if they are recorded in other formats. For details, refer to the instructions of your writing software.

n DVD-Audio DVD-Audio discs are divided into several large sections (groups) and small sections (tracks). These sections are all allotted numbers, called group numbers and track numbers.

DVD

Track1 Track2 Track1Track3

1 2

Track2

DVD-Audio

Group1 Group2

G etting S

tarted

NOTE ABOUT DIVX VIDEO: DivX is a digital video format created by

DivX, Inc. This is an official Divx Certified device that plays DivX video. Visit www.divx.com for more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play DivX Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the device setup menu. Go to vod.divx.com with this code to complete the registration process and learn more about DivX VOD.

1.DBP-A100_E3_ENG_007.indd 5 2010/08/12 19:20:05

ENGLISH

6

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

About Media

Cautions on Using Media Inserting a Disc

Set the disc in the tray label side up. Make sure the disc tray is fully open when inserting the disc. Place the disc horizontally in the tray, aligned with the tray guide.

NOTE Only load one disc at a time. Loading two or more discs can damage

the unit or scratch the discs. Do not use cracked or warped discs or discs that have been repaired

with adhesive, etc. Do not use discs on which the sticky part of cellophane tape or

labels is exposed or on which there are traces of where labels have been removed. Such discs can get caught inside the player and damage it.

Do not use discs in special shapes, as they may damage the player.

Do not push the disc tray in by hand when the power is off. Doing so could damage the set.

If a disc that cannot be played is loaded or the disc is loaded up- sidedown, NO DISC is displayed on the players display.

How to Handle Media

Do not get fingerprints, oil or dirt on discs. Take special care not to scratch discs when removing them from

their cases. Do not bend or heat discs. Do not enlarge the hole in the center. Do not write on the labeled (printed) surface with ball-point pens,

pencils, etc., or stick new labels on discs. Condensation may form on discs if they are moved suddenly from

a cold place (outdoors for example) to a warm place, but do not try to dry discs with a hairdryer, etc.

Do not eject a SD Memory Card or turn off the DBP-A100 while a card is being played. This may result in malfunction or loss of the cards data.

Do not attempt to open or modify SD Memory Cards. SD Memory Cards and files can be damaged by static electricity.

Do not touch the metal contacts of an SD Memory Card with your fingers.

Do not use warped SD Memory Cards. After use, be sure to remove any disc or SD Memory Card, and store

it in its proper card case, to avoid dust, scratches and deformation. Do not store discs in the following places:

1.Places exposed to direct sunlight for long periods of time 2.Dusty or humid places 3.Places exposed to heat from heaters, etc.

Cleaning Discs

If there are fingerprints or dirt on a disc, wipe them off before using the disc.

Use a commercially available disc cleaning set or a soft cloth to clean discs.

Gently wipe the disc from the inside towards the outside.

Do not wipe with a circular motion.

NOTE Do not use record spray, antistatic agents, benzene, thinner or other solvents.

About Copyrights

Unauthorised copying, broadcasting, public performance and lending of discs are prohibited.

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Portions of this product are protected under copyright law and provided under license by ARIS/SOLANA/4C.

G etting S

tarted

Inserting an SD Memory Card

Insert an SD Memory Card in the direction of the arrow into the SD CARD slot with the label facing up.

Insert the card straight into the SD CARD slot until it clicks.

To remove the card, push it in and then release to eject.

SD Memory Card

1.DBP-A100_E3_ENG_007.indd 6 2010/08/12 19:20:06

ENGLISH

7

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections S

pecifications

Inserting the Batteries

About the Remote Control

e Put the rear cover back on.

q Remove the rear cover. w Set three R6/AA batteries in the battery compartment in the indicated direction.

NOTE Use R6/AA batteries in this remote control. Replace the batteries with new ones if the set does not operate

even when the remote control is operated close to the unit. (The supplied batteries are only for verifying operation.)

Be sure to insert the batteries in the proper direction, following the q and w marks in the battery compartment.

To prevent damage or leakage of battery fluid: Do not use a new battery with an old one. Do not use two different types of batteries. Do not attempt to charge dry batteries. Do not short-circuit, disassemble, heat or dispose of batteries in a fire.

If the battery fluid leaks, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.

Remove the batteries from the remote control if it will not be used for a long time.

Used batteries should be disposed of in accordance with local regulations on battery disposal.

Operating Range of the Remote Control Operate the remote control while pointing it at the remote sensor.

30 30

Approx.23feet/7m

NOTE The set may function improperly or the remote control may not operate if the remote control sensor is exposed to direct sunlight, strong artificial light from an inverter type fluorescent lamp or infrared light.

Remote Control Settings (Remote Control Side)

Switches when the DBP-A100s remote control operates another DENON BD players in the vicinity. Set the remote control code simultaneously on the main unit, too. For instructions on setting codes, see GUI menu: Other Setup Remote Control Setting Remote ID (vpage 31).

GRemote control code settingH

1 : Set the remote control code to 1.

2 : Set the remote control code to 2.

If the signal code of the remote control does not match the signal code of the unit, the remote control code set on the unit is shown on the display. GExampleH If the code setting on the unit is DENON 1, and the setting on the remote control is 2, PLAYER 1 is shown on the display.

NOTE Match the signal code of the remote control with the signal code of

the unit. If the remote control code is different, you cannot operate the DBP-A100 with the remote control.

Even if you change the remote control code, set the GUI menu Other Setup Remote Control setting Receive Legacy Remocon (vpage 31) to Off when operating the DBP-A100 with a remote control other than DENONs.

G etting S

tarted

1.DBP-A100_E3_ENG_007.indd 7 2010/08/12 19:20:06

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections S

pecifications

ENGLISH

8

Front Panel

Part Names and Functions

For buttons not explained here, see the page indicated in parentheses ( ).

Q2Q3Q4Q5

i o Q0 Q1

Q6Q7Q8Q9W0

q ew r t y u

Display

wq e r

tyuioQ0

q Playback mode indicators 1 : During Playback 3 : During pause and step-by-step playback PROG : During program playback RAND : During random playback

1 A-B : During repeat playback

w Information display Displays various information or playback elapsed time and so on of the disc.

e Playback format indicators

r Downmix indicator Displayed when playing back downmix permitted audio.

t Angle information indicator Displayed when a scene on the currently playing disc has been shot at various angles.

y Audio channel indicators Displays the number of audio signal channels during playback. 2CH : 2-channel playback MULTI : Multi-channel playback

u Time mode indicators TOTAL : Total time of Super Audio CD and CD SING : Elapsed time of title/chapter/track/file

being played REM : Remaining time of title/chapter/track/file

being played

i Group/Title/Track/Chapter indicators

o HDMI output indicator Display when HDMI video or audio signals are being output.

Does not display when the HDMI cable is not correctly connected or when the HDMI connection is not verified.

Q0 Media indicators BD : BD DVD : DVD-Video, DVD-R/+R/-RW/+RW DVD AUDIO : DVD-Audio SUPER AUDIO CD : Super Audio CD CD : CD SD : SD Memory Card Displays the inserted media.

G etting S

tarted

q Power operation button (ON/STANDBY) (20)

w Power indicator (20)

e DISC LAYER button (37)

r PURE DIRECT button (38)

t HDMI RESOLUTION button (13)

y Remote control sensor (7)

u SD CARD slot (6)

i SOURCE button (34)

o Pause/Still button (3) (41, 43)

Q0 Fast reverse/slow button (6) (43)

Q1 Fast forward/slow button (7) (43)

Q2 Reverse-skip/Forward-skip buttons (8,9) (41)

Q3 Stop button (2) (41)

Q4 Play button (1) (37)

Q5 Disc tray open/close button (5) (34)

Q6 Disc tray (6)

Q7 Display (8)

Q8 CLOCK CONTROL indicator (17, 28) Lights when playing BD with DENON LINK 4th (jitter free) connections.

Q9 DENON LINK indicator (50)

W0 ADVANCED AL24 indicator (50)

When power is in standby mode, press Q4 and Q5 to turn the power on.

1.DBP-A100_E3_ENG_007.indd 8 2010/08/12 19:20:06

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

ENGLISH

9

Part Names and Functions

Rear Panel For buttons not explained here, see the page indicated in parentheses ( ).

q

Q2 Q1 Q0 o i u

w e t yr

G etting S

tarted

q 7.1ch AUDIO OUT connectors (16)

w VIDEO OUT connector (18)

e S-VIDEO OUT connector (18)

r COMPONENT VIDEO OUT connectors (18)

t ROOM TO ROOM IN/OUT jacks Extension jack for future use.

y RS-232C connector Extension connector for future use.

u AC inlet (AC IN) (20)

i ETHERNET connector (19, 20)

o HDMI OUT connectors (13)

Q0 DENON LINK 4th connector (17)

Q1 DIGITAL OUT OPTICAL/COAXIAL connectors (15)

Q2 2ch AUDIO OUT connectors (18) For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output.

NOTE Do not touch the inner pins of the connectors on the rear panel. Electrostatic discharge may cause

permanent damage to the unit. Do not put your finger or foreign objects in the fan opening. Doing so could cause injury or unit failure. When outputting audio from a DTS-HD 7.1-channel source to HDMI or analog 7.1 channel audio, and to

2-channel analog audio, perform the following settings so that the audio is down mixed to the correct 2-channel analog audio output signal as intended by the producer of the source and DTS, Inc.

In HDMI Setup, set Audio Setup to 2Ch (vpage 23). In Audio Setup, set 7.1ch Audio Out to 2 Channel (vpage 25).

If Audio Setup in HDMI Setup and 7.1ch Audio Out in Audio Setup are not set to 2Ch or 2 Channel respectively, 2-channel analog audio is output using this units own downmix. In this case, the downmix may differ from that intended by the producer of the source and DTS, Inc.

1.DBP-A100_E3_ENG_007.indd 9 2010/08/12 19:20:06

ENGLISH

10

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Part Names and Functions

Remote Control For buttons not explained here, see the page indicated in parentheses ( ).

When power is in standby, press W0 and E1 to turn the power on. You can use Q6 when operating the BD popup menu screen, etc.

q Remote control signal transmitter (7)

w POWER buttons (POWER OFF, POWER ON) (20)

e HDMI RESOLUTION button (HDMI RES.) (13)

r HDMI MODE button (14)

t Number buttons (0 ~ 9, +10) (35, 36)

y MODE button (32)

u DIMMER button (47)

i TOP MENU button (T) (36)

o ENTER button (22)

Q0 SETUP button (S) (21)

Q1 Fast-reversing button (6) (43)

Q2 Pause/Still button (3) (41, 43)

Q3 Reverse-skip button (8) (41)

Q4 ANGLE button (47)

Q5 DISPLAY button (34)

Q6 RED/GRN/BLU/YEL buttons

Q7 PURE DIRECT button (38)

Q8 PICTURE ADJUST button (33)

Q9 SOURCE button (34)

W0 Disc tray OPEN/CLOSE button (5) (34)

W1 PROGRAM/DIRECT button (PROG/DIRECT) (45)

W2 RANDOM button (44)

W3 CLEAR button (33)

W4 SEARCH button (SRCH) (37)

W5 CALL button (45)

W6 REPEAT button (44)

W7 A-B button (44)

W8 MENU/POP UP MENU button (36)

W9 Cursor buttons (uiop) (22)

E0 RETURN button (R) (22)

E1 Play button (1) (37)

E2 Fast-forwarding button (7) (43)

E3 Stop button (2) (41)

E4 Forward-skip button (9) (41)

E5 SUBTITLE button (46)

E6 AUDIO button (45, 46)

E7 PAGE + button (38)

E8 DISC LAYER button (37)

G etting S

tarted

q

w

Q9

W0 W1

W2

W3

W4 W5 W6 W7

W8

W9

E0

E3 E4

E2 E1

E5 E6

E7 E8

e r

t

y u

i o

Q0

Q1

Q3 Q4

Q2

Q5

Q6

Q7 Q8

1.DBP-A100_E3_ENG_007.indd 10 2010/08/12 19:20:07

ENGLISH

11

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

Connections Connect the DBP-A100 as follows before using. Make connections according to the equipment you are connecting. Some DBP-A100 settings may be necessary depending on the connection method. Check each connection item for more information.

1 Home Theater Playback vpage 13 Playing on a Multi-Channel System

Multi-channel Audio + Video

HDMI connection Using an HDMI Cable to Connect to an AV Amp or Television (vpage 13)

or

Multi-channel Audio DENON LINK connection

Making a Jitter-free Connection (vpage 17) Making a Normal Connection (vpage 17)

Digital audio connection Connection to an AV Amp with No HDMI Audio Input (vpage 15)

Analog 7.1ch connection Connecting to a Device with an Analog Multi-channel Audio Input Terminal (vpage 16)

Video Analog video connection

Connection to an AV Amp with No HDMI Video Input (vpage 17)

2 Playing with a Direct Connection to a TV vpage 18

Audio + Video

HDMI connection (vpage 13)

or

Audio

Analog audio connection (vpage 18)

Video

Analog video connection (vpage 18)

4 Recording a CD vpage 19

Digital output Connecting to a Digital Recording Device (vpage 15)

DBP-A100

DBP-A100

DBP-A100

3 Playing 2-Channel Audio vpage 18

2-ch stereo pin plug cable (unbalanced) connection Connecting to a Device with Analog 2-channel Audio Input Terminal with Stereo Pin Plug Cable (vpage 18)

5 Using the BD-LIVE function or updating the software version of DBP-A100

vpage 19

LAN connection Connecting to a Network (vpage 19)

DBP-A100

DBP-A100

Connecting the Power Cord Once Connections are Completed

vpage 20

C onnections

1.DBP-A100_E3_ENG_007.indd 11 2010/08/12 19:20:07

ENGLISH

12

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Video cables

Component video connections (Sold separately)

Component video (75 ) cable

S-Video connections (Sold separately) S-Video cable

Video connections (Included)

75 pin-plug video cable

Other cables

DENON LINK connections (Included) DENON LINK cable

Network connections (Sold separately) Ethernet cable

Preparation

Connecting Cables

Prepare cables corresponding to the devices you choose.

Audio and video cables

HDMI connections (Sold separately) 19-pin HDMI cable

Audio cables

Coaxial digital connections (Sold separately) Coaxial digital (75 pin-plug) cable

Optical digital connections (Sold separately) Optical cable

Analog connections (stereo, surround) (1 included) R

L

R

L

Stereo pin plug cable

Analog connections (center, subwoofer) (Sold separately) Pin-plug cable

(Y)

(PB/CB)

(PR/CR)

NOTE Do not plug the power cord into the power outlet until all connections

are complete. Be sure to read the owners manuals for connected devices. First check the connection channels and then correctly connect the

input and output channels. Do not bundle the power cord with connection cables. This can

result in noise.

Use only HDMI (High Definition Multimedia Interface) cables that bear the HDMI logo (genuine HDMI product). Using cables without the HDMI logo (non-genuine HDMI product) may result in abnormal playback.

When outputting deep colour or 1080p, etc., we recommend you use a High Speed HDMI cable for enhanced, high-quality playback.

C onnections

1.DBP-A100_E3_ENG_007.indd 12 2010/08/12 19:20:07

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

13

1. Home Theater Playback Playing on a Multi-channel System

C onnections

When connecting with an HDMI cable, press and set it to HDMI On. Your DBP-A100 automatically detects the audio/video signal supported by the connected HDMI

device and outputs the signal. To change the setting, see HDMI Setup on the GUI menu (vpage 23, 24).

NOTE

When you press and set it to HDMI On, no video signals are output from the component video outputs.

To disable video or audio output from the HDMI terminal, set the Video Out of the Pure Direct Setup, which outputs high quality analog audio, to Off. To enable the HDMI signal output, set the Pure Direct mode to one of the following settings: Pure Direct mode Off or User Preset 1 or User Preset 2 (b)

(Playing Back High-Quality Audio (Pure Direct Function) vpage 38) b Do this after setting Pure Direct Setup User Preset 1 or User Preset 2 Video Out on the GUI menu to On (vpage 28).

Using an HDMI Cable to Connect to an AV Amp or Television

With HDMI On

Audio/video signals are output from the HDMI terminal. When the HDMI video resolution is set to Auto as described in HDMI Video Resolution Settings (vpage 13), the DBP-A100 outputs the highest resolution video signal that is supported by the connected equipment.

IN HDMI

AV Amp or TV

With HDMI Off

Audio/video is not output from the HDMI terminal.

NOTE When audio/video signals are output from the HDMI terminal, no video signals are output from the

component terminals. When a signal comprising 24 frames per second, such as 1080P24, is output from the HDMI terminal,

no video signals are output from the video or S-Video outputs.

n Connection to a device with a DVI-D terminal If you use a HDMI/DVI-D conversion cable (sold separately), HDMI video signals are converted to DVI- D signals, enabling connection to a device with a DVI-D terminal.

NOTE In this case, the audio signal is not output. Make the appropriate audio connections for your devices.

(vpage 14 ~ 20). The video signal will be in RGB format. You cannot output to a DVI-D device that does not support HDCP (high-bandwidth digital content

copyright protection system). Video may not be output depending on the combination of devices.

Setting HDMI Video Output

n Make HDMI Output Signal and HDMI Control Function Settings HDMI Setup (vpage 23, 24)

n Make the Video Output Signal Setting for the Connected Television Video Setup (vpage 24)

n HDMI Video Resolution Settings

Change the HDMI video resolution by pressing . Switch the output mode as follows. The default settings is underlined.

Auto 480/576i

1080P24 1080P 1080i

480/576P

720P

Source Direct

If the HDMI resolution is not set to Auto, set it to correspond with the resolution of your television. Images will not be projected normally if the television resolution and DBP-A100s output resolution do not match.

Audio and video will be temporarily interrupted if the power of the connected device currently playing is turned off, or the input is switched.

When you change the HDMI video resolution of the DBP-A100, it takes a few seconds up to about 10 seconds for validation between the DBP-A100 and the connected device. Audio/video is not output during this period.

When outputting deep colour or 1080p, etc., we recommend you use a High Speed HDMI cable for enhanced high-quality playback.

Required Settings for HDMI Connection

(480/576 interlaced) (480/576 progressive)

(720 progressive)(1080 interlaced)(1080 progressive)(1080 progressive, 24-frame)

(Source direct)(Auto)

When outputting a video signal comprising 24 frames per second from the HDMI terminal, select 1080P24 or Source Direct after setting the GUI menu HDMI Setup I/P Direct (vpage 23) to On.

See overleaf

1.DBP-A100_E3_ENG_007.indd 13 2010/08/12 19:20:08

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

14

1. Home Theater Playback Playing on a Multi-channel System

Setting HDMI Audio Output

When you press and set HDMI Setup Audio Setup to Auto (vpage 23) on the GUI menu, the audio mode is set according to the connected device.

When you want to set the HDMI audio output to one of your choosing change it according to the following table.

Refer to the owners manual of the connected device for HDMI audio input specifications compatible with the connected device. Device to be connected Setting items About output signal and speaker settings

Devices with the following built-in decoders Dolby TrueHD Dolby Digital Plus Dolby Digital DTS-HD DTS

Auto

DBP-A100 outputs a bitstream signal that is decoded by the connected device.

b In this case, you cannot make a speaker setting for HDMI audio with the DBP-A100. Make the setting with the connected device. b When outputting Dolby TrueHD or DTS-HD audio, press

and set BD Audio Mode to HD Audio Output (vpage 32).

Devices compatible with multi-channel HDMI audio input, but not capable of speaker settings for each channel

Multi LPCM BM On

Outputs multi-channel Linear PCM audio signals with speaker settings by the DBP-A100.

b For speaker settings, on the GUI menu, Audio Setup 7.1ch Audio Out Multi Channel Speaker Configuration (vpage 25). b BM : Bass Management (means multi-channel speaker setting)

Devices compatible with multi-channel HDMI audio input, and capable of speaker settings for each channel

Multi LPCM BM Off

Output of multi-channel Linear PCM audio signals from the DBP-A100. Make speaker settings with the connected device.

b BM : Bass Management (means multi-channel speaker setting)

Devices compatible with 2- channel HDMI audio input

2Ch Downmixed 2-channel Linear PCM audio signals are output from the DBP-A100. Make speaker settings with the connected device.

Devices not compatible with HDMI audio signal input

Mute

Audio signal are not output from the DBP-A100s HDMI terminal. Only video signals are output from the HDMI terminal.

b Make the audio connections.

NOTE When the HDMI video resolution is set to 1080P24, a HDMI video signal is output from the DBP-A100

with a resolution of 1080P and a frame rate of 24 frames per second, regardless of the video signal on the disc being played. Because of this, when playing discs containing video signals recorded with a frame rate of something other than 24 frames per second, the movement of the picture may be unnatural. If this happens, set the HDMI video resolution to something other than 1080P24.

When the I/P Direct (vpage 23) setting is On and a disc with a frame rate of 24 frames per second is played, no video signals are output from the video or S-Video outputs.

When the I/P Direct (vpage 23) setting is Off, 1080P24 is not displayed.

n Audio signal from the HDMI output terminal You can change the audio format and playback the number of channels according to the specifications of the device to which the DBP-A100s HDMI audio output signals are input. Make settings while checking the specifications of the audio device to be connected as well as the audio format/number of channels stored in media and files for playback.

Media/Files Audio format

Setting HDMI Setup Audio Setup (vpage 23) on the GUI menu

Auto Multi LPCM BM On/Off

2Ch

BD

Dolby Digital Dolby Digitalz1

Multi LPCM 2-ch Downmix LPCM

Dolby Digital Plus Dolby Digital Plusz1

Dolby TrueHD Dolby TrueHDz1

DTS DTSz1

DTS-HD DTS-HDz1

LPCM Multi LPCM

AVCHD Dolby Digital Dolby Digital

Multi LPCM 2-ch Downmix LPCM

LPCM Multi LPCM

DVD-Video

Dolby Digital Dolby Digital

DTS DTS

LPCM, MPEG 2-ch LPCM

DVD-Audio LPCM, PPCM Multi LPCM

2-ch Downmix LPCM

Super audio CDz2

Multi area

Stereo area 2-ch LPCM

CD layer

DivX Dolby Digital Dolby Digital Multi LPCM

2-ch Downmix LPCM

MP3, MP2 2-ch LPCM

CD, MP3, WMA, AAC, LPCM

DTS-CD DTS Multi LPCM 2-ch Downmix LPCM

z1 :Multi LPCM signals are output when BD Audio Mode is set to Mix Audio Output (vpage 32). Multi LPCM signals are output when outputting HDMI video signals with resolutions of 480i/576i or 480p/576p.

z2 :Super Audio CD audio signals are output at 44.1 kHz 16-bit.

Even if HDMI Setup Audio Setup on the GUI menu is set to Auto (vpage 23), multilinear PCM or downmixed 2-channel linear PCM signals are output if a device that does not support bitstream is connected.

C onnections

1.DBP-A100_E3_ENG_007.indd 14 2010/08/12 19:20:08

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

15

Copyright protection system

In order to play back digital video and audio such as BD-Video or DVD-Video via HDMI connection, both the player and TV or the AV Amp need to support the copyright protection system known as HDCPHigh-bandwidth Digital Content Protection System). HDCP is copyright protection technology comprising data encryption and authentication of the connected AV device. Our DBP-A100 supports HDCP.

NOTE If a device that does not support HDCP is connected, video and audio are not output correctly. Read the

owners manual of your television or AV Amp for more information. The audio signal from the HDMI output terminal (sampling frequency, number of channels, etc.) may be

limited by the HDMI audio specifications of the connected device for permissible inputs. For example, if the HDMI audio specification of the connected device is 5.1 channels, 5.1-channel audio will be automatically output even when playing back 7.1 channels on the DBP-A100. In this case, analog audio output will also be 5.1-channel.

Audio signal input may not be supported depending on the HDMI compatible monitor (projector, etc.) being used. When the DBP-A100 is connected to this kind of device, audio signals are not output from the HDMI terminal.

1. Home Theater Playback Playing Back Using Multi-channel System

Connecting to an AV Amp with No HDMI Audio Input When playing back Dolby Digital Plus/Dolby TrueHD/DTS-HD audio recorded on a BD disc, the DBP- A100 outputs Dolby Digital or DTS bitstream from its digital audio output terminal.

AUDIO

COAXIAL IN

IN OPTICAL

AV Amp

NOTE Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals are not output with

this connection. When outputting Dolby TrueHD/Dolby Digital Plus/DTS-HD audio signals, do so with an HDMI connection (vpage 13, Using an HDMI Cable to Connect to an AV Amp or Television).

Super Audio CDs DSD signal cannot be output. Also, during CD layer playback, 44.1 kHz/16-bit Linear PCM is output.

Do not output DTS audio signals to an AV Amp that does not support DTS. Playing back a BD/DVD disc with recorded DTS content can generate noise and even damage your speakers.

When connecting with an optical transmission cable (sold separately), make sure the plug shape aligns with the socket, and insert fully.

Match the shapes

C onnections

1.DBP-A100_E3_ENG_007.indd 15 2010/08/12 19:20:08

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

16

1. Home Theater Playback Playing Back Using Multi-channel System

Audio Signal from the Digital Audio Output (Optical/Coaxial) Terminal

The DBP-A100 can convert and output digital audio signal format recorded on various media. Convert the digital audio signal in accordance with the specifications of the device that is to input digital audio output signals from the DBP-A100.

Media/Files Audio format

Setting Audio Setup Digital Out (vpage 27) on the GUI menu

Bitstream PCM/

PCM Down Sampling

BD

Dolby Digital

Dolby Digitalz1

2-ch Downmix LPCM

Dolby Digital Plus

Dolby TrueHD

DTS DTSz1

DTS-HD

LPCM 2-ch Downmix LPCMz1

AVCHD Dolby Digital Dolby Digital

LPCM 2-ch Downmix LPCM

DVD-Video

Dolby Digital Dolby Digital

DTS DTS

LPCM, MPEG 2-ch Downmix LPCM

DVD-Audio LPCM, PPCM

Super Audio CD

Multi area Audio is not output

Stereo area

CD layer 2-ch LPCM

DivX Dolby Digital Dolby Digital 2-ch Downmix LPCM

MP3, MP2

2-ch LPCMCD

MP3, WMA, AAC, LPCM

DTS-CD DTS 2-ch Downmix LPCM (DTSz2)

z1 :Bitstream signals are output according to the BD re-encode setting when BD Audio Mode is set to Mix Audio Output (vpage 32).

z2 :When HDMI Setup Audio Setup is set to Auto on the GUI menu and bitstream is output from the HDMI , the DTS bitstream is output from the digital audio output (optical/coaxial) as well.

For content with copyright protection, audio signal is down-sampled to 48kHz 16bit and output.

Connecting to a Device with an Analog Multi-channel Audio Input Terminal Outputs multi-channel audio decoded by the DBP-A100. If your audio system has an analog multi-channel audio input terminal, connect using audio cable (sold separately).

FRONT

SUBWOOFER

R

L

R

L

R

L

SURROUND

SURROUND BACK

CENTER

AUDIO

R R

L L

R R

L L

R R

L L

AV Amp In the case of a 5.1-channel connection, you do not need to connect the SBR/SBL terminals. In this case, on the GUI menu, select Audio Setup 7.1ch Audio Out Multi Channel Speaker Configuration Surr. Back, and set Size to None (vpage 25).

C onnections

1.DBP-A100_E3_ENG_007.indd 16 2010/08/12 19:20:09

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

17

1. Home Theater Playback Playing Back Using Multi-channel System

NOTE When using DENON LINK 4th functions, press the and set to HDMI On. The jitter-free function does not work except during BD playback. In this case, the video signal is

output from the HDMI OUT terminal, and the audio signal from the DENON LINK terminal.

When you connect the DBP-A100 to a DENON LINK 4th compatible AV Amp using a DENON LINK cable and HDMI cable, during BD playback the DBP-A100s circuit operates with the AV Amps master clock signal. (The clock control indicator of the DBP-A100 lights.) This enables transmission of high- quality digital audio with minimal jitter.

DENON LINK

AUDIO

IN HDMI

AV Amp

DENON LINK Connection q Making a Jitter-free Connection BD

Connecting to an AV Amp with No HDMI Video Input

VIDEO

VIDEO IN

S VIDEO IN

Y

PB

PR

COMPONENT VIDEO IN

AV Amp

NOTE DENON LINK does not support BD audio transmission.

When connecting to a DENON LINK-compatible AV Amp, the multi-channel signals of DVD-Audio discs, Super Audio CDs, etc., can be transferred as such in digital format.

The DENON LINK connection requires the version of AV Amp to be connected to match the DBP- A100 version. Check the version of the AV Amp, and then on the GUI Menu, set DENON LINK Setup DENON LINK Mode (vpage 28). If the DBP-A100 and AV Amp versions do not match, audio cannot be output correctly.

DENON LINK

AUDIO

AV Amp

DENON LINK supports digital transmission up to 24 bit/2-ch at 192/176.4 kHz, and up to 24 bit/6-ch at 96 kHz or less.

When you have made a DENON LINK connection, the DBP-A100s speaker setting becomes invalid. (Make the speaker setting on the connected AV Amp)

DENON LINK 2nd cannot transmit multi/stereo area audio of a Super Audio CD.

DENON LINK Connection w Making a Normal Connection

Check the video terminals and connect to one of them.

When connecting using the component video outputs, press and set it to HDMI Off.

C onnections

1.DBP-A100_E3_ENG_007.indd 17 2010/08/12 19:20:09

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

18

2. Playing with a Direct Connection to a TV Check the televisions audio and video terminals and connect to one of them.

AUDIO

AUDIO IN

LR

VIDEO IN

VIDEO VIDEO

IN S VIDEO

VIDEO

COMPONENT VIDEO

Y PB PR

IN IN HDMI

R L

R L

TV

Audio terminals Video terminal S-Video input terminal

Component video input terminal

HDMI input terminal

TV TV TV TV

(Sold separately)

(supplied)(supplied) (Sold separately)

(Sold separately)

NOTE Do not connect the DBP-A100s video output via a VCR (Video Cassette Recorder). Some media contain copy prohibiting signals, which will disturb the screen image. When playing an NTSC disc,the DBP-A100s video output changes to the NTSC signal format. When playing a PAL disc, the DBP-A100s video output changes to the PAL signal format.

n When connected to the televisions component video input terminal The DBP-A100s component video output supports 480i/576i/480p/576p/720p/1080i output. Match the

output to the corresponding resolution of the connected television by setting on the GUI menu: Video Setup Component Resolution (vpage 24). Images will not be projected normally if the television resolution and DBP-A100s output resolution do not match. Copyright protected DVDs are output in 480i/576i or 480p/576p.

NOTE

When you press and set it to HDMI On, no video signals are output from the component video terminals. When using the component video terminals, set the HDMI mode to HDMI Off.

n When connected to the HDMI input terminal It outputs both digital video and digital audio signals. See Required Settings for HDMI Connection (vpage 13) for HDMI video output and audio output settings.

3. Playing Back 2-Channel Audio

Connecting to a Device with Analog 2-channel Audio Input Terminals with a Stereo Pin Plug Cable

AUDIO

AUDIO IN

L

R R

L

R

L

Stereo

For software recorded in multi-channel, an analog signal down-mixed to 2 channels is output.

AUDIO

AUDIO IN

L

R R

L

R

L

Stereo

For software recorded in multi-channel, an analog signal down-mixed to 2 channels is output.

When connecting using the analog 2-channel audio output terminals

When connecting using the analog 7.1-channel audio output terminals

On the GUI menu, select Audio Setup 7.1ch Audio Out, and set it to 2 channel (vpage 25).

C onnections

1.DBP-A100_E3_ENG_007.indd 18 2010/08/12 19:20:10

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

19

Connecting to a Digital Recording Device

AUDIO

COAXIAL IN

IN OPTICAL

MD Recorder

When converting multi-channel audio to 2-channel for output, select Audio Setup Digital Out on the GUI menu and set it to PCM Down Sampling (vpage 27). If you play back DVD or other media with an incorrect configuration, a deafening noise occurs that may damage your speakers.

4. Recording a CD

Connecting to a Network You can use a disc that offers the BD-LIVE function by connecting the unit to the Internet (vpage

36). You can update by downloading the latest firmware from the Internet.

For more information, on the GUI menu select Other Setup Firmware Update (vpage 31). You can also operate this unit from a computer using the Web control function (vpage 47).

Internet

Modem

Router

Computer

LAN port/ Ethernet

connector

To WAN port

To LAN port

To LAN port

ETHERNET connector

5. Using BD-LIVE function or updating the software version of DBP-A100

C onnections

See Network Setup (vpage 29) on the GUI menu for more information on network settings.

1.DBP-A100_E3_ENG_007.indd 19 2010/08/12 19:20:10

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup G

etting S tarted

S pecifications

ENGLISH

20

System Requirements

n Internet Connection via Broadband

n Modem A device that connects to the broadband and conducts communications on the Internet. Some modems also incorporate a router.

n Router When using the DBP-A100, we recommend a router with the following features.

Built-in DHCP (Dynamic Host Configuration Protocol) server. This function automatically assigns an IP address on the LAN.

Built-in 100BASE-TX switch (built-in switching hub compatible with speeds upwards of 100 Mbps)

n Ethernet cable (CAT-5 or greater recommended) An ethernet cable is not included with the DBP-A100. Use only shielded STP or ScTP LAN cable which is available at retailer. We recommend a shielded straight cable (normal type) for Ethernet connections.

If you use the flat type or a non-shielded cable, the noise may adversely affect other devices.

For Internet connections, use an ISP (Internet Service Provider). Ask your local dealer for details.

NOTE Do not connect an ETHERNET connector directly to the LAN port/Ethernet connector on your computer. It is necessary to subscribe to an ISP in order to connect to the Internet. If you already have a

broadband connection, there is no need to subscribe anew. The router you can use varies with the ISP. For more information, contact your ISP or PC dealer. DENON assumes no responsibility whatsoever for any communication errors or problems resulting

from customer's network environment or connected devices.

n Other The DBP-A100 can use the DHCP function to automatically set up the network. When setting up your network manually, after subscribing to an ISP, make the settings according to

directions in Network Setup on the GUI menu (vpage 29). If you connect the DBP-A100 to a network without a DHCP function, conduct IP address and other

settings according to Network Setup on the GUI menu (vpage 29). The DBP-A100 does not support PPPoE. If you subscribe to a service that is set with PPPoE, a PPPoE-

compatible router is required. When setting up the network manually, consult with your network administrator for the settings to

make.

5. Using BD-LIVE function or updating the software version of DBP-A100 Connecting the Power Cord Connect the included power cord to the DBP-A100, and plug it into an AC outlet.

NOTE Be sure to insert the power plug firmly. Incomplete connection results in noise.

Once Connections are Complete

On the GUI menu, when Other Setup Auto Power Mode On (vpage 31), the following states are maintained for about 30 minutes, and then the power is automatically turned to standby.

Turning the Power On

n When power is switched to standby

Press either on the unit, or on the remote control.

GPower indicator status in standby modeH Power Saving Standby : Off Normal Standby : Red Quick Start Mode : Red

NOTE During power standby, a slight amount of power is consumed. To totally cut off the power, remove the power cord from the power outlet.

Press the units or the remote controls . The power turns on, and the power indicator lights green. LOADING appears on the display, and disc information is read.

b The NO DISC message is displayed if a disc is not loaded. (DBP-A100)

(Remote control unit)

Disc not loaded Playback has stopped Stopped due to resume function

C onnections Power cord

(included)

To household power outlet (AC 120 V, 60 Hz)

1.DBP-A100_E3_ENG_007.indd 20 2010/08/12 19:20:11

ENGLISH

21

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

Pressing displays the GUI menu. From this menu, you can move to various setting screens.

GUI Menu Setup

Network Setup (vpage 29, 30)

n DHCP n Proxy

Language Setup (vpage 23)

n Dialog n Subtitles

Video Setup (vpage 24)

n TV Aspect (Aspect ratio) n Component Resolution

DENON LINK Setup (vpage 28)

n DENON LINK Mode

Pure Direct Setup (vpage 28)

n User Preset 1 n User Preset 2

Ratings (vpage 29)

n Password n BD Rating Level n DVD Rating Level

Display Setup (vpage 30)

n Screen Saver n Wallpaper n Still Mode Other Setup (vpage 31)

n Auto Power Mode n Power Saving n Remote Control Settings n BD Data Utility

Menu Map

n Slide Show Time n Temporary Display n Captions

n Rating Country Codes n DivX Registration

n Progressive Mode n TV Active Area

n Disc Menus n GUI Language

n Initialize n Firmware Update n Information n Maintenance Mode

n IP Address n MAC Address

S etupHDMI Setup (vpage 23, 24)

n Auto Format n I/P Direct n Color Space n Deep Color

n Audio Setup n SA-CD Audio Out n HDMI Control

Audio Setup (vpage 25 ~ 27)

n 7.1-ch Audio Out Multi Channel 2-Channel n Subwoofer Mode n Source Direct

n Compression n BD Effect Sound n BD Re-Encoder n Digital Out n Downmix

1.DBP-A100_E3_ENG_007.indd 21 2010/08/12 19:20:13

ENGLISH

22

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

GUI Menu Operation

Typical examples are described below.

Examples of GUI Menu Screen Displays

n Exiting the GUI Menu

Press while the GUI menu is displayed. The GUI menu display disappears.

NOTE You must use the GUI menu to make settings or operate while a disc or SD Memory Card is not inserted. In cases in which the resume function is activated, you may not make correct settings.

Text colors of selected items of the GUI menu are as follows: White : These items can be selected. Gray : These items cannot be selected.

(Use to switch.)

7.1ch Audio Out Subwoofer Mode

Compression Source Direct

BD Effect Sound

Switch to the next item

Selected item

Switch the selected item

Switch to the next item

b Switch the selected item using .

n Icon

n List

GExample 1H Menu selection screen (Top menu)

AUDIO SETUP

7.1ch Audio Out Multi Channel Subwoofer Mode 2 Channel

Compression Source Direct

BD Effect Sound

Set to output analog 7.1ch audio.

RATINGS

BD

Enter the country code.

1 a n A N ! . _

2 3 4 5 6 7 8 9 0 Space b c d e f g h i j k l m o p q r s t u v w x y z B C D E F G H I J K L M O P Q R S T U V W X Y Z # $ % & ( ) * + , / : ; < = > ? @ [ ] ^ ` Delete Finish

RETURN0-9CURSOR Enter 09 Return

LANGUAGE SETUP

Dialog Subtitle

GUI Language Disc Menus

Set the language used for playback dialogs, subtitles, and menus.

GExample 2H Rating-Country Code input screen (with virtual keyboard)

z3

z4

z5

z2

z1

z1 : List of GUI menu setup icons z2 : Currently selected setup icon z3 : Currently selected setup item z4 : List of currently selected setup items z5 : Guide text for the currently selected

setup itemPress to select and then press .

(Or press .)

z6 z7

z8

z9

z6 : Selected setup icon z7 : Options of the selected setup item

z8 : Virtual keyboard z9 : Operation button guide

Selected item

(Use to switch.)Switch the selected item

(Use to switch.)

(Use to switch.)

Returns to the previous item (Use or to switch.)

1 Press . The GUI menu is displayed on the TV screen.

2 Press to select the menu to be set or operated.

b To return to the previous item, press or .

3 Press to enter a setting.

S etup

1.DBP-A100_E3_ENG_007.indd 22 2010/08/12 19:20:15

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

23

Setting items Setting contents Dialog Sets the dialog used to play BDs or DVDs.

Original : Plays the dialog selected at the top in the language menu stored in the disc. English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/ Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/ Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/ Slovak/Bulgarian Others : Enter the language code.

Subtitle Sets the subtitle language used to play BDs or DVDs.

Off : No subtitles displayed English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/ Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/ Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/ Slovak/Bulgarian Others : Enter the language code.

Disc Menus Sets the language used for BD or DVD menus.

English/French/Spanish/German/Japanese/Italian/Swedish/Dutch/ Russian/Chinese/Korean/Danish/Finnish/Norwegian/Icelandic/ Hungarian/Romanian/Turkish/Greek/Irish/Portuguese/Polish/Czech/ Slovak/Bulgarian Others : Enter the language code.

GUI Language Sets the GUI language.

English/Franais/Espaol/Deutsch/Italiano/Svenska/Nederlands/

NOTE The setting may not be active depending on the disc.

If Other is selected for Dialog, Subtitle or Disc Menus, refer to the Language Code List (vpage 51), and use the number buttons ~ to input the language code, then press to set.

Setting items Setting contents Auto Format Sets the content of HDMI video output resolution item Auto (vpage 14) with

.

Max Res. : Outputs data using the maximum resolution that can be handled by the connected TV. Panel Res. : Outputs data using the maximum resolution of the panel of the connected TV.

If the TV does not support 1080P24, video is output in 1080P format.

I/P Direct Sets whether the I/P converter converts 24P frames.

Off : Converts 1080 progressive 24 frames to 60 frames. On : Outputs 1080 progressive 24 frames without conversion.

NOTE When I/P Direct is set to On and some discs are played, no video signal is output from the video and S-Video terminals.

Color Space Sets the video signal system to be output from HDMI.

YCbCr : Outputs in the YCbCr video format. RGB Normal : Outputs using the RGB video system (16 (black) to 235 (white)). RGB Enhanced : Outputs using the RGB video system (0 (black) to 255 (white)).

Deep Color Sets the HDMI terminal to output Deep Color. Expands the color depth (number of used colors) of the HDMI video signal, enabling playback with more natural colors and free of streaking.

Auto : Deep Color is automatically output when the connected HDMI device supports Deep Color. Off : No Deep Color output.

Audio Setup Sets the audio signal system to be output from HDMI.

GAutoH : Automatically selects and outputs signals that can be input to the connected HDMI device. The bitstream signal takes priority.

GMulti LPCM BM OnH : Decoded Linear PCM multi-channel signal is output by the DBP-A100. Speaker settings are enabled. (BM: Bass Management) For settings, on the GUI menu, refer to, Audio Setup 7.1-ch Audio Out (vpage 25, 26). Speaker Confi guration : Sets the speaker confi guration used for

playback. Automatically sets channel components and characteristics according to the settings.

Channel Level : Sets the volume of the test tone to be the same when it is output from each speaker.

Distance : Sets the distance between the listening position and each speaker.

Sets the language used for playback dialogs, subtitles, and menus. Sets the HDMI output signal or HDMI control function.

Language Setup Default settings are underlined. HDMI Setup Default settings are underlined.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

See overleaf

1.DBP-A100_E3_ENG_007.indd 23 2010/08/12 19:20:16

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

24

HDMI Setup

Setting items Setting contents Audio Setup GMulti LPCM BM OffH : Decoded Linear PCM multi-channel signal is

output by the DBP-A100. This setting is not made in speaker settings. (BM: Bass Management)

G2ChH : Outputs the downmixed 2-channel LPCM signal.

GMuteH : Does not output audio from HDMI.

SA-CD Audio Out Sets to output the stereo/ multi area audio of Super Audio CD to the HDMI terminal.

On : Super Audio CD audio is output. Off : Super Audio CD audio is not output.

The Super Audio CD audio signal is a 44.1 kHz/16-bit Linear PCM output.

HDMI Control Can operate the unit in conjunction with an HDMI control supported device.

GControlH Off : Disables the HDMI control function. On : Links with the device connected to HDMI.

GPower Off ControlH On : Turns the DBP-A100s power to standby through linkage to the TV. Off : Does not turn the DBP-A100's power to standby through linkage

to the TV.

For the HDMI control function to operate, it is necessary for the DBP- A100 or HDMI-compatible TV connected to the DBP-A100 to have an HDMI connection.

Refer to HDMI Control Function (vpage 449) for more information on HDMI control functions.

The HDMI control function from the connected device is enabled when, on the GUI menu, DENON LINK Setup DENON LINK Mode is set to 4th (vpage 28).

After the HDMI Control setting has been changed, always turn off the power to the connected equipment and then turn it back on.

NOTE If you set DENON LINK Setup DENON LINK Mode on the GUI menu to 4th, you will no longer be able to change the HDMI Control Control setting. To change the setting, switch the DENON LINK Mode to a setting other than 4th fi rst and then change the setting.

Setting items Setting contents TV Aspect (Aspect ratio) Set the screen type and display mode of the TV.

16:9 Squeeze Auto : Outputs to a wide screen TV. For 4:3 video, displays in the center of the screen without changing the aspect ratio. z1 WIDE (16:9) : Outputs to a wide-screen TV. 4:3 PS : Outputs to a 4:3 TV. For wide video, trim the left and right side of the image and display in 4:3 aspect ratio. z2 4:3 LB : Outputs to a 4:3 TV. Displays all of the wide video.

Component Resolution z3 Sets the component output resolution.

480/576i, 480/576P, 720P, 1080i, Source Direct : Outputs video using its source resolution. Converts a 1080p video source to 1080i.

Progressive Mode Sets an appropriate progressive conversion mode for the source video material.

Auto : Detects the type of video material and automatically switches the mode. Normally, this setting is used. Video1 : Suitable for playing video material discs. Video2 : Suitable for playing video material discs or 30-frame fi lm material discs.

TV Active Area Sets the horizontal display range when the analog video output resolution is 480i/576i.

Full : Setting when a home-use monitor is connected. Normal : This setting is used when video synchronization is disturbed on a professional-use monitor.

This is not available for HDMI output.

z1 :This has no effect on the video and S-Video outputs. z2 :Depending on the video content, even though you set it to 4:3 PS ( Pan Scan), the content may be

output in 4:3 LB ( Letter Box). z3 :When video is output from the HDMI terminal, no video signal is output from the component

terminals.

Set the video output signal according to the connected TV.

Video Setup Default settings are underlined.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

1.DBP-A100_E3_ENG_007.indd 24 2010/08/12 19:20:17

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

25

Setting items Setting contents 7.1ch Audio Out GSurr. BackH : Sets the presence, size and number of surround back

speakers. Size : Sets the surround back speaker size.

Large : For use with large speakers that can adequately play back low frequencies. Small : For use with small speakers that cannot adequately play back low frequencies. None : Select when no surround back speakers are connected.

Number : Sets the number of surround back speakers. 1 spkr : Use only one surround back speaker. Surround back audio is output from the surround back L terminal. 2 spkrs : Use two surround back speakers.

GCrossover Freq.H : Sets the upper limit of the low frequency signal output from the subwoofer. 40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz

: Keeps the output level below the set frequency to avoid overloading the specifi ed low frequency performance of your subwoofer. Sets one of these frequencies according to the low frequency output capabilities of your speakers.

Advanced : Sets the low frequency signals to be output from the signals of the respective speakers to the subwoofer. Front, Center, Surround, Surr. Back 40Hz/60Hz/80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz LFE / LFE+Main 80Hz/90Hz/100Hz/110Hz/120Hz/150Hz/200Hz/250Hz

When, on the GUI menu, Audio Setup 7.1ch Audio Out Multi Channel Speaker Confi guration Subwoofer is set to Yes (vpage 25), you can select LFE or LFE+Main.

Setting items Setting contents 7.1ch Audio Out Makes the audio setting for output of analog 7.1- channel audio to a multi- channel amplifi er. To set 7.1ch Audio Out, set HDMI Setup Audio Setup on the GUI menu to 2Ch or Mute (vpage 24).

NOTE You cannot select None or No for HDMI Setup Audio Setup Multi LPCM BM On Speaker Confi guration (vpage 23, 24) on the GUI menu.

Multi Channel

Set the speaker confi guration, channel level and distance for multi- channel playback.

2 Channel

Outputs multi-channel downmixed audio from the front speaker output terminals (FL/FR) of the 7.1-channel audio output terminals. Make this setting when outputting to a TV and 2-channel amplifi er.

NOTE The 7.1-channel audio output terminals only outputs to FL/FR when you make this setting.

n Speaker Confi guration : Sets the speaker confi guration.

GFrontH : Sets the front speaker size. Large : For use with large speakers that can adequately play back low

frequencies. Small : For use with small speakers that cannot adequately play back

low frequencies.

GCenterH : Sets the presence and size of the center speaker. Large : For use with large speakers that can adequately play back low

frequencies. Small : For use with small speakers that cannot adequately play back

low frequencies. None : Select when no center speaker is connected.

GSubwooferH : Sets the presence of a subwoofer. Yes : Use a subwoofer. No : Select when a subwoofer is not connected.

GSurroundH : Sets the presence and size of the surround speakers. Large : For use with large speakers that can adequately play back low

frequencies. Small : For use with small speakers that cannot adequately play back

low frequencies. None : Select when surround speakers are not connected.

Set the speaker or audio to be output. Setting related to each channel setting and other audio in the case of outputting analog audio signals decoded by the DBP-A100.

Audio Setup Default settings are underlined.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

See overleaf

1.DBP-A100_E3_ENG_007.indd 25 2010/08/12 19:20:17

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifications

ENGLISH

26

Setting items Setting contents 7.1-ch Audio Out NOTE

Select Large or Small not according to the physical size of the speaker but according to the low frequency reproduction capabilities based on the frequency set at Crossover Freq..

On the GUI menu, if the Audio Setup 7.1-ch Audio Out Multi Channel Speaker Configuration item setting is changed, other settings are automatically changed as well. GExampleH If you set Front to Small, Subwoofer is set to Yes and Large cannot be selected for Center, Surround and Surr. Back.

Audio signal (sampling frequency, number of channels) from the HDMI output terminal may be restricted by the specification of the HDMI audio that can be input by the device on the other side. GExampleH If the HDMI audio specification of the device on the other side is 5.1-channel, even when DBP-A100 plays back in 7.1-channel, 5.1-channel audio is output automatically. In that case, the analog audio output becomes 5.1-channel output as well.

n Channel Level : Sets the volume of the test tone to be the same when output from each speaker.

GModeH : Select a test tone output method. Auto : Automatically switches the test tone output speaker. Manual : Manually switches the test tone output speaker.

GStartH : Begins outputting the test tone. Front L / Center / Front R / Surround R / Surr. Back R / Surr. Back L / Surround L / Subwoofer

b When the test tone output stops, press .

GSW +10dBH : Increases the subwoofer output level by 10 dB. z Off : Does not change the subwoofer output level. On : Increases the subwoofer output level by +10 dB. z : SW +10dB cannot be set for HDMI Setup Audio Setup

Multi LPCM BM On Channel Level on the GUI menu.

GDefaultH : Resets all channel level settings to factory default. No : Does not Reset. Yes : Resets.

Audio Setup

Setting items Setting contents 7.1ch Audio Out n Distance : Sets the distance between the listening position and each

speaker.

GFeetH or GMetersH : Set the unit of distance.

GStepH : Set the minimum variable width of the distance. 1ft, 0.1ft, 0.1m, 0.01m

GDefaultH : Reset all distance settings to factory default.

Front L / Front R / Center / Subwoofer / Surround L / Surround R / Surr. Back L / Surr. Back R : Select the speaker you want to set, and set the distance. Set the value that is closest to the measured distance. 0 ~ 60ft or 0 ~ 18m

Default settings : Front/Center/Subwoofer : 12 feet (3.6 meters) Surround/Surr. Back : 10 feet (3.0 meters)

Set the difference in the distance betweem the speakers to less than 20 feet (6.0 meters).

NOTE When BD Audio Mode is set to HD Audio Output (vpage 32), the Distance setting is disabled during DTS-HD 192kHz audio playback.

Subwoofer Mode Sets the type of low frequency signal to be output from the subwoofer.

LFE : Adds the low frequency signal of the channel for which the speaker size is set to small to the subwoofer signal and outputs it. LFE+Main : Adds the low frequency signal of all channels to the subwoofer signal and outputs it.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

1.DBP-A100_E3_ENG_007.indd 26 2010/08/12 19:20:18

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifications

ENGLISH

27

Setting items Setting contents Source Direct Disables the speaker and subwoofer settings and outputs the disc audio as is.

NOTE Set to within the playback frequency band of the amplifier you will use: On at 50 kHz or 100 kHz. Settings outside the frequency band can result in damage to your amplifier and even fire.

Off : Enables the speaker and subwoofer settings. On : 50kHz : Outputs the disc content as is. When playing Super Audio CD, outputs up to 50 kHz audio signals. On : 100kHz : Outputs the disc content as is. When playing Super Audio CD, outputs up to 100 kHz audio signals.

Setting On: 50 kHz or On: 100 kHz enables full-range playback on all channels recommended for DTS. (Note that this results in a 5 dB increase in subwoofer volume, and a 15 dB increase with Super Audio CDs). This also allows you to play back the 6-channel source of DVD-Audio recorded on all channels with the full frequency range. In this case, make analog connections according to the disc operating manual.

When set to On: 50 kHz or On: 100 kHz, all speaker sizes are set to Large and Yes is set for the subwoofer.

Even when set to On: 50 kHz or On: 100 kHz, the Channel Level and Distance settings can be made.

Compression Compresses the dynamic range of Dolby TrueHD/ Dolby Digital/Dolby Digital Plus audio. At night or other times when you cannot play back at high volume, this compensates by reducing high level sounds and increasing low level sounds.

Auto : Automatically compresses the Dolby TrueHD audio dynamic range. The sound is not compressed when playing signals other than Dolby TrueHD signals. Off : Dynamic Range compression is not applied. Low : Sets minimum dynamic range compression. Middle : Sets medium dynamic range compression. High : Sets maximum dynamic range compression.

BD Effect Sound Sets for a clicking and other sound outputs during BD popup menu operation.

On : Outputs BD effect sound. Off : Does not output BD effect sound.

Audio Setup

Setting items Setting contents BD Re-Encoder Sets the format during output of the BDs Mix Audio signal from the digital output terminal.

Auto : Outputs the primary audio (main audio) in the same type of audio format. Dolby Digital/Dolby Digital Plus/Dolby TrueHD are output as Dolby Digital, DTS/DTS-HD are output as DTS and Linear PCM is output as Linear PCM. Dolby DigitalOutputs to the digital audio output terminal (optical/ coaxial) with Dolby Digital. DTS : Outputs to the digital audio output terminal (optical/coaxial) with DTS.

Valid when BD Audio Mode is set to Mix Audio Output (vpage 32).

Digital Out Sets the audio signal of digital audio output. For more information on each audio signal, refer to Audio Signal from the Digital Audio Output (Optical/Coaxial) Terminal (vpage 17).

Bitstream : Outputs a bitstream signal. Converts Dolby TrueHD, Dolby Digital Plus to Dolby Digital, and DTS-HD to DTS for output. PCM : Outputs the downmixed audio signal to 2-ch LPCM. PCM Down Sampling : Converts sampling frequency audio greater than 48 kHz to a 48 kHz 2-ch LPCM audio output signal.

When outputting CD, etc. to a digital recording device, such as a CD recorder, convert to PCM or PCM down sampling.

When a disc with recorded Linear PCM or PPCM (Packed PCM) is played back, this outputs Linear PCM regardless of the setting.

Downmix Sets the method used to convert a multi-channel audio signal to a 2-channel signal.

Lt/Rt : Signals are converted to Dolby Surround compatible 2-channel audio signals for output. This setting is valid for DTS-HD, DTS Digital Surround, Dolby Digital Plus and Dolby Digital audio signals. (If the connected AV Amp is Dolby Pro Logic compatible, the AV Amp plays back using surround audio.) Stereo : Outputs by converting to 2-ch (stereo) audio.

NOTE In order to enable the Lt/Rt setting when playing back BD, set BD Audio Mode to HD Audio Output (vpage 32).

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

1.DBP-A100_E3_ENG_007.indd 27 2010/08/12 19:20:18

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

28

Setting items Setting contents DENON LINK Mode Sets the audio output of DENON LINK.

GOffH : Does not use DENON LINK. G2ndH : Outputs digital audio using DENON LINK 2nd. G3rdH : Outputs digital audio using DENON LINK 3rd. G4thH : Outputs digital audio using DENON LINK 4th. Compatible with jitter-free connections. For more information, refer to DENON LINK Connection q Making a Jitter-free Connection (vpage 17). HDMI : Improves HDMI digital signal jitter.

When set to 4th, the HDMI control function becomes available from the connected device.

When 4th is set and jitter-free connection is set up, audio affected by the jitter-free function is output from the HDMI terminal during BD playback. When playing back media other than that, the video signal is output from the HDMI terminal and the audio signal is output from the DENON LINK terminal, respectively.

To play DENON LINK 4th signals, connect to a DENON LINK 4th-compatible AV Amp using an HDMI and a DENON LINK cable.

For information on the 4th setting of the AV Amp, see the owner's manual of the AV Amp.

Set the audio signal to be output from the DENON LINK terminal.

DENON LINK Setup Default settings are underlined.

Setting items Setting contents User Preset 1/ User Preset 2 Sets the operating mode for User Preset 1 or User Preset 2 selected by . Setting each of these items to Off enables output of high quality analog signals free of interference from their associated circuits.

GDigital OutH : Sets whether to output signals to the digital audio output terminal. On : Enables digital audio output. Off : Disables digital audio output. GVideo OutH : Sets the option of video output. On : Enables video output. Off : Disables video output. This setting also disables audio output from

the HDMI terminal. GDisplayH : Set the option for front panel display. On : Turns on the display. Off : Turns off the display.

For more information, see Playing Back High-quality Audio (Pure Direct Function) (vpage 38).

Makes settings for digital audio and video output modes during Pure Direct mode, as well as for display messages. Two types of setting can be made.

Pure Direct Setup Default settings are underlined.

n Signals Compatible with DENON LINK Setting and Transmission The DENON LINK setting for the DENON LINK version of the connected AV Amp is as follows:

DENON LINK version of AV Amp

The DENON LINK setting

of the DBP-A100

Media

BD (During

jitter-free connection)

DVD- Video

DVD- Audio

Super audio

CD CD SD

2nd Generation (2nd displayed near

terminal) 2nd A S S A S S

3rd Generation (3rd displayed near

terminal) 3rd A S S S S S

4th Generation (4th displayed near

terminal) 4th S S S S S S

NOTE With DENON LINK connections, no audio signals other than those of BD are output from the HDMI terminal. (When DENON LINK Mode is set to 2nd and HDMI Setup SA-CD Audio Out (vpage 24) is set to On, the audio signals of Super Audio CD are output from the HDMI terminal.)

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

1.DBP-A100_E3_ENG_007.indd 28 2010/08/12 19:20:18

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

29

Setting items Setting contents Password Sets the password for changing the parental control level and parental control country code of BD and DVD.

Change : Changes the password.Use ~ to enter a password and then press to fi nalize it.

The default setting is 0000.

BD Rating Level Sets the parental level for playing BD.

Level 0 ~ 254 : Sets the age allowed to play back media. Restricts playback of discs with relevant parental control. No Limit : Does not restrict playing of BDs.

DVD Rating Level Sets the parental level for playing DVDs.

Level1 ~ 8 : Sets the parental level for playing DVDs. Lock All : Restricts playing of all DVDs. No Limit : Does not restrict playing of DVDs.

Rating Country Code Sets the standard country parental control. Applies the parental level of the set country.

Argentina / Australia / Austria / Belgium / Brazil / Canada / Chile / China/ Denmark / Finland / France / Germany / Hong Kong / India / Indonesia / Italy / Japan / Korea, Republic of / Malaysia / Mexico / Netherlands /New Zealand / Norway / Pakistan / Philippines / Portugal / Russian Federation / Singapore / Spain / Switzerland / Sweden / Taiwan / Thailand / United Kingdom / United States / Colombia / Greece / Ireland / Luxembourg / Poland Others : Input the country code. Refer to Country Code List (vpage 52) and use and on the virtual keyboard to input the country code.

DivX Registration Displays the DivX registration code.

Show Code : Displays the DivX registration code

Set BD or DVD parental lock or display DivX registration codes.

Ratings Default settings are underlined.

Setting items Setting contents DHCP Sets how to perform network confi guration, automatically or manually.

Since the factory default setting is On, you do not need to set items such as the IP address if the DHCP server of the broadband router is set to Enable. Confi gure a proxy server if necessary.

GOnH : Automatically confi gures the network via the DHCP function. GOffH : When connecting to a network that lacks the DHCP function, manually confi gure the following network settings. Consult with the ISP or your network administrator for what settings to make. Use ~ to enter values and then press to fi nalize them.

IP Address (BD-LIVE, Update) : Manually confi gure the IP address for BD-LIVE or Firmware Updates.

IP Address (Control) : This is a confi guration for future extensions. Usually it is not necessary to confi gure this.

Subnet Mask : If a xDSL modem or terminal adaptor is directly connected to the DBP-A100, enter the subnet mask provided by the ISP, usually in a document. Usually, 255.255.255.0 is set.

Default Gateway : If the device is connected to a gateway (router), enter its IP address.

Primary DNS : Enter the primary DNS. Secondary DNS : Enter the secondary DNS.

Proxy Setting for connecting to the Internet via a proxy server.

GOffH Does not use a proxy server. GOn (Address)H Set to connect to the Internet via a proxy server. Use the address to specify the proxy server. Use ~ to enter the address and then press to fi nalize it.

Port : Use ~ to enter the port number and then press to fi nalize it.

GOn (Name)H Set to connect to the Internet via a proxy server. Specify the proxy server using the domain name. Input the domain name with the virtual keyboard, using and .

Port : Use ~ to enter the port number and then press to fi nalize it.

Settings for connecting to the Internet. You can use a disc which offers BD-LIVE functions by connecting the unit to the Internet (vpage 36). To obtain update support for your DBP-A100, you can download the latest fi rmware from our website. Follow the instructions in Connecting to the Network (vpage 19) to make network connections.

Network Setup Default settings are underlined.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

1.DBP-A100_E3_ENG_007.indd 29 2010/08/12 19:20:19

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

30

Setting items Setting contents Screen Saver Sets the screensaver.

Off : Does not use the screensaver. On : The screensaver function activates when stop or pause status continues for about three minutes. The screensaver function also activates during playback of a CD, Super Audio CD or audio fi le when no operations are performed for about three minutes.

Wallpaper Setting for displaying the background when playback is stopped.

Picture : Displays the DENON logo. Black : Sets the background to black. Gray : Sets the background to gray. Blue : Sets the background to blue.

Still Mode Sets image quality when paused.

Automatic : Displays automatically using Field or Frame according to the still image information. Field : Set when there is a blurred image when Automatic image display is set. Frame : Set to display non-moving images in high resolution.

Slide Show Time Sets the display time of JPEG fi les.

3 ~ 5 ~ 100sec : This sets how long to display each frame of a JPEG fi le during slideshow playback.

Temporary Display When the display is set to Off by the Dimmer Control (vpage 47) or Pure Direct Function (vpage 38), this sets it to temporarily display operations received.

Off : Does not temporarily display operations. On : Temporarily displays operations.

Captions This setting outputs a subtitles signal to a closed caption decoder (sold separately).

Off : Does not output the closed caption (subtitle) signal. On : Outputs the closed caption (subtitle) signal.

Settings for display-related items.

Display Setup Default settings are underlined.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

Setting items Setting contents IP Address BD-LIVE, Firmware Update : Displays the IP address for BD-LIVE or

Firmware Updates. Control : Displays the IP address for future extensions.

MAC Address BD-LIVE, Firmware Update : Displays the MAC address for BD-LIVE or Firmware Updates. Control : Displays the MAC address for future extensions.

Network Setup

1.DBP-A100_E3_ENG_007.indd 30 2010/08/12 19:20:19

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifi cations

ENGLISH

31

Setting items Setting contents Initialize All settings including audio mode and picture quality are set to default settings.

Cancel : Does not initialize. OK : Executes initialization.

Firmware Update Updates the fi rmware of the unit via the Internet.

Check for Update : Checks if a newer version of fi rmware exists. You can also check approximately how long it will take to complete an update. Start : Starts fi rmware update. When updating starts, the power indicator lights red and the GUI screen shuts down. While updating, a rough estimate of remaining time is indicated on the display. When updating is complete the power indicator lights green and the normal status is resumed.

Information Displays the license for the IPA font used by this product.

GFont LicenseH Japanese (Original) : Displays in Japanese. The font used in this products GUI menu screen conforms to IPA font specifi cations. See the following URL for the IPA font license agreement. http://ipafont.ipa.go.jp/enduser_license.html

Maintenance Mode Use when receiving maintenance from a DENON service engineer or custom installer.

NOTE Only use this function if so instructed by a DENON service person or installer.

Cautions on Firmware Update

In order to use these functions, you must have the correct system requirements and settings for a broadband Internet connection (vpage 19, 29).

Do not turn off the power until updating is complete. Information regarding the Firmware Update function will be announced on the DENON web site

each time related plans are decided. Even with a broadband connection to the Internet, approximately 1 hour is required to complete the

updating procedure. Once updating starts, you cannot perform normal operations on the DBP-A100 until updating is complete. Also, settings of the GUI menu of DBP-A100 and/or image adjustment settings may be initialized.

If a disc is in the tray, remove it before performing Firmware Update.

Remote control operation buttons

:Displays the menu Cancels the menu

:Moves the cursor (Up/Down/Left/Right)

:Makes the setting :Returns to previous menu

S etup

Setting items Setting contents Auto Power Mode This setting automatically sets the power to standby.

Off : Does not use the auto power mode. On : This setting automatically sets the power to standby if any of the following states continues for approximately 30 minutes. Disc not loaded Playback stopped Stopped due to the resume function

Power Saving Sets to power saving mode during standby.

Power Saving Standby : This is the lowest power consumption mode. During standby, operations are not accepted via HDMI control or RS-232C. Power indicator status in standby mode : Off Normal Standby : During standby, operations are accepted via RS-232C. Power consumption is slightly higher at this time. Power indicator status in standby mode : Red Quick Start Mode : Start up time is faster but power consumption during standby is higher. Operations are accepted via HDMI Control and RS-232C. Power indicator status in standby mode : Red

Remote Control Setting (Main unit side) Sets the remote control.

GRemote IDH

Switches the DBP-A100s remote control ID code when other DENON BD Players are in the vicinity. DENON 1 : Set the switch in the remote control battery compartment to

1 as well (Remote Control Settings (Remote Control Side) vpage 7). DENON 2 : Set the switch in the remote control battery compartment to

2 as well (Remote Control Settings (Remote Control Side) vpage 7). GReceive Existing Remote ControlH Set whether or not to accept remote control signals of a DENON DVD player or other device. On : Accepts Off : Does not accept

BD Data Utility Erases data on SD Memory Card, and initializes cards.

BD Data Erase : Erases both internal memory and SD Memory Card storage. Initialize SD Card : Initializes the SD card to be used for the Bonus View and BD-LIVE functions.

NOTE Insert or remove a SD Memory Card while the power is in standby.

If the SD Memory Card is inserted when the power is switched on, there are occasions where the card cannot be read, or the BD cannot be played.

The SD card used for the Bonus View function must have a capacity of 1GB or greater. Also the SD card must be initialized on the DBP-A100.

This operation will delete all the data. Do not perform this operation when an SD card containing MP3 or JPEG data is inserted.

Remove the disc from the disc tray when carrying out BD Data Erase or Initialize SD Card.

Sets other items.

Other Setup Default settings are underlined.

1.DBP-A100_E3_ENG_007.indd 31 2010/08/12 19:20:19

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback C

onnections G

etting S tarted

S pecifications

ENGLISH

32

S etup

Setting items Setting contents File filter Selects the file formats you wish to play from among the files mixed on a disc.

All : Plays MP3/WMA/AAC/LPCM/JPEG/DivX files. Audio : Plays MP3/WMA/AAC/LPCM files. Picture : Plays JPEG files. Video : Plays DivX files. Audio & Picture : Plays MP3/WMA/AAC/LPCM/JPEG files.

This operation is effective only when playback is stopped.

Setting items Setting contents Secondary Video (PIP) Off : Does not display Secondary Video(Picture-In-picture).

1/Xz : Displays the first Secondary Video. 2/Xz : Displays the second Secondary Video. X/Xz : Displays the X th Secondary Video. z X is the number of Secondary Videos recorded and differs

depending on the disc (Playing Bonus View vpage 36)

Audio/Video Sync Corrects displaced video- audio playback timing.

HDMI / Component : Audio output is synchronized to the video output from the HDMI terminal or component terminals. S-VIdeo /Video : Audio output is synchronized to the video output from the S-Video or Video terminals.

Audio Delay Adjust While viewing video, manually adjust the time to delay audio output.

0 ~ 200msec : Use this to adjust the audio output delay time manually.

Vertical Stretch Extends the cinemascope size video vertically.

Off : Displays the source video signal without modification. This should normally be set to Off. On : Set when viewing cinemascope size video with a combination of projector and anamorphic lens. Extends the image vertically so that the top and bottom black portions disappear.

NOTE This has no effect with the video and S-Video outputs.

Changing the Playback File Display Default settings are underlined.

Making Other Settings Default settings are underlined. You can set the audio mode and switch the kind of files to play. You can make various mode settings during playback. The setting menu is displayed at the top of the screen.

Various Settings

Setting items Setting contents BD Audio Mode Switches the BD audio playback mode.

HD Audio Output : Can view by outputting high quality signals such as Dolby TrueHD, Dolby Digital Plus, or DTS-HD as its high sound quality bitstream. Cannot listen to interactive or secondary audio. Mix Audio Output : Outputs a mix of primary audio/interactive audio/ secondary audio.

NOTE When BD Audio Mode is set to Mix Audio Output, DTS-HD 192kHz audio is decoded to 96kHz.

1 Press . Displays a menu of items that can be set.

b The display content changes depending on the media being played.

2 Select a setting item using , and then press or .

3 Use to select a setting and use to change the setting.

Vertical Stretch

All

Off BD Audio Mode Mix Audio Output File filter

Setting the Audio Mode Default settings are underlined.

1.DBP-A100_E3_ENG_007.indd 32 2010/08/12 19:20:19

ENGLISH

33

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

S etup

Setting items Setting contents Default

DNR Reduces noise in the entire picture.

0 ~ +3 0

Contrast Adjusts picture contrast.

6 ~ +6 0

Brightness Adjusts picture brightness.

0 ~ +12 0

Enhancer z3 Strengthens the contours of the picture.

0 ~ +11 0

Gamma Correction z1 Adjusts video brightness in detail. G0 ~ 9

G0 = 24 / G1 = 32 G2 = 48 / G3 = 64 G4 = 80 / G5 = 96

G6 = 128 / G7 = 160 G8 = 192 / G9 = 224

Sharpness (medium range) z1, 3 Adjusts picture sharpness for the medium frequency range.

6 ~ +6 0

Sharpness (high range) z3 Adjusts picture sharpness for the higher frequency range.

6 ~ +6 0

Hue (color tone) z4 Adjusts the green and red color balance.

6 ~ +6 0

White Level Adjusts the white level.

5 ~ +5 0

Black Level z3 Adjusts the black level.

5 ~ +5 0

Chroma Level Adjusts the color density.

6 ~ +6 0

Setup Levelz2 Adjusts the black areas of the image.

0 IRE 7.5 IRE 7.5 IRE

H.Position z3 Adjusts the left/right position.

7 ~ +7 0

V.Position z3 Adjusts the top/bottom position.

7 ~ +7 0

You can adjust the picture quality to your liking. You can store up to a maximum of 5 values in memory.

n To Finalize Picture Adjustments Press with the picture adjusted.

n When Outputting Standard Picture Quality without Using Picture Adjustment

Press and to select Standard and then press .

Gamma Correction

When you select Gamma Correction, and then press , you can change the setting with .

In the example of the graph below, the horizontal axis shows the brightness level of the pictured recorded on the disc. The vertical axis shows the brightness of the picture output by the DBP-A100.

PICT Gamma CorrectionMemory 5

0 0

255

255 G0:024

When the brighter areas on the disc side are adjusted to be output darker, the normally hard to see bright parts become clearly discernible images.

PICT Gamma CorrectionMemory 5

0 0

255

255 G0:024

When the darker areas on the disc side are adjusted to be output brighter, the normally hard to see dark parts become clearly discernible images.

n Resuming Initial Values after Gamma Correction

Press while the graph is displayed.

The picture adjustment settings are retained in memory even after the power is turned off.

Adjusting the Picture Quality (Picture Control)

1 Press . The currently set status is displayed.

2 Select the memory number you want (Memory 1 ~ Memory 5) with , and then press .

Standard Memory 1

Memory 5PICT

3 Select the item(s) you wish to change with .

Memory 1 DNR Contrast

V.Position 0 0

0

4 Change the setting with .

b Refer to the table on the right for information on the different settings.

z1This is not available for HDMI output. z2 Effective only for the 480i video signal from the video output terminal, S

video output terminal, and component video output terminal. z3 This has no effect with the video and S-Video outputs. z4 This has no effect with the video and S-Video outputs when playing PAL

video.

1.DBP-A100_E3_ENG_007.indd 33 2010/08/12 19:20:20

ENGLISH

34

Troubleshooting Inform

ation H

D M

I C ontrol Function

S etup

C onnections

G etting S

tarted S

pecifi cations S

etup

Playback

Introduction

Before Playing a Disc

The playback media mode setting remains in memory, even when the power is set to standby.

NOTE The symbol (prohibited mark) may appear on the top

right of the TV screen during an operation. This means that the operation being conducted is prohibited.

Depending on the disc, certain operations may not be as described in this manual. Check each disc owners manual for more information.

During playback of a 2-layered disc, pictures may stop momentarily. This happens when the 1st layer switches to the 2nd layer. This is not a malfunction.

Playing Discs n Playing BD and DVD-Videos (vpage 36) n Playing Super Audio CDs (vpage 37) n Playing CDs (vpage 37) n Playing DVD-Audio (vpage 37, 38) n Playing High-Quality Audio (vpage 38)

Playing Files

n Playing Files (vpage 38 ~ 40)

Operations Enabled During Playback (vpage 41)

1 Turn on the power of the amplifi er and TV. Set the TV and amplifi er source to DBP-A100 input.

2 Turn the DBP-A100 on.

b When you wish to play a bonus view, before turning the DBP-A100 on insert a SD Memory Card that has at least 1GB and has been initialized by DBP-A100.

3 Press to set the playback media mode to DISC MODE.

4 Insert a disc.

Press to open/close the disc tray. Insert the disc with the side you want to play

face down.

Before Playing an SD Memory Card

1 Turn on the power of the amplifi er and TV. Set the TV and amplifi er source to DBP-A100 input.

2 Insert a SD Memory Card. Insert the SD Memory Card in the direction indicated by the arrow with the label side up (vpage 6, 8).

3 Turn the DBP-A100 on.

4 Press to set the playback media mode to SD CARD MODE.

The displayed playback information toggles between the information bar and the media player screen each time is pressed. To close the display, press until it goes away.

Title

Title Elapsed

Chapter

00:05:52

1/61/1

Disc informationTime display

Cursor

b Displayed content differs depending on the media being played. Also, the information displayed while playing and stopped differs.

b Displayed inside the frame at the top of the screen. (See the next page.)

About Playback Information

Information Bar Display BD DVD-A DVD-V DVD DivX

Playback

Web control function (vpage 47,48)

1.DBP-A100_E3_ENG_007.indd 34 2010/08/12 19:20:21

ENGLISH

35

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

DATA DISC

Single Elapsed 00:25

Song Artist Album

Now PlayingTrack 2

n Disc Information Display Title Title being played/total number of titles Chapter Chapter being played/total number of

chapters Group Group being played/total number of

groups Track Track being played/total number of tracks

n Time Display Title Elapsed Title Remain Chapter Elapsed Chapter Remain Group Elapsed Group Remain Track Elapsed Track Remain

n HDMI Output Signal Display Video Info Video output signal format/resolution Audio Info Audio format being output Max Channel Number of audio channels that the

connected device can receive

1 Use to move the cursor to the item that you wish to find.

2 Use ~ and to enter a value.

3 Press . The search is executed and playback begins.

b If the input number information is not on the disc, the current playback display reappears.

Select

Set

~ , Number entry

n Disc Information Display SA-CD MP3 WMA AAC

Title

Artist name

Album title

For information on the time display and the HDMI output signal display, see Information Bar Display (vpage 34).

Image

Media

Track being played

Playback mode

Time Display

About Playback Information

Searching with the Information Bar

When you enter a number to find in the orange cursor area, that location is found. You can search in four modes, Title, Chapter, Group and Track search.

Media Player Display SA-CD CD MP3 WMA AAC LPCM

1.DBP-A100_E3_ENG_007.indd 35 2010/08/12 19:20:21

ENGLISH

36

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifi cations

Playback

Title 1 Top menu

Chapter 3

Chapter 4

Chapter 5

Chapter 6

Disc Menus

Audio Setup

Angle

Sub Story

Top Menu

Subtitle

Chapter 2

Popup menu

Title 1 Title 2 Bonus title

If you have so mething to sa y, see this pict ure before you

GExampleH Top menuGExampleH Disc menu

GExampleH Popup menu

With BD, depending on the disc, you can select title and chapter from the popup menu.

n Playing BD-Videos Compatible with Bonus View With a disc that is compatible with bonus view (picture-in-picture),

in addition to the main video (primary video) stored on the disc, you can play back the video directors commentary and simultaneously ongoing sub-story, as well as sub-video such as alternative camera angles (secondary video).

Some BD discs use SD cards as the recording memory for Bonus View playback. With the DBP-A100 is in standby, insert the SD Memory Card before playing the disc.

The playback method, etc., is determined by the disc, and varies depending on the disc. Refer to the operation guide of the relevant disc.

n Playing Bonus Views

Press to select the secondary video display you wish to play.

Off 1/X 2/X X/X

GSelectable itemH

Off : Does not display Secondary Video. 1/Xz : Displays the fi rst Secondary Video . 2/Xz : Displays the second Secondary Video. X/Xz : Displays the X th Secondary Video.

z: X is the number of Secondary Videos recorded and differs depending on the disc.

Main video (primary video)

Sub video (secondary video)

GExampleH Bonus view

n Enjoying BD-LIVE features The functions that can be used with BD-LIVE differ from disc to

disc. For details on the functions and how to operate them, see the individual discs on-screen displays and explanations.

An SD card must be loaded in the DBP-A100 in order to save downloaded contents for using BD-LIVE functions. Use an SD card with a capacity of 1 GB or greater. Also, the SD card must be formatted on the DBP-A100.

Do not remove the SD card from the DBP-A100 while playing a BD-LIVE compatible disc.

NOTE Insert or remove a SD Memory Card while the power is in standby.

If you insert a SD Memory Card while the power is ON, the SD Memory Card may not be read.

The SD card used for the BD-LIVE and Bonus View Functions must have a capacity of 1GB or greater. Also the SD card must be initialized on the DBP-A100 (vpage 31).

To use BD-LIVE functions, connect the DBP-A100 to the Internet and make the settings described below, as necessary:

Connections Connecting to the Network (vpage 19) Settings Network Setup (vpage 29) Depending on your network environment, it may take time to

connect to the network or connection may not be possible. Remove the write protection of the SD Memory card.

1 Playback preparation (Before Playing a Disc vpage 34).

2 Make the various settings for playback on the disc menu.

Select

Playback

You can make the following settings on the disc menu. (The items you can set differ depending on the contents of your disc.) Subtitle language Audio language Audio format etc.

When playing a BD hybrid disc, the disc layer can be changed to BD layer or DVD layer by pressing .

During DVD-Video playback, press or to display the menu.

If the menu continues, press to get to the next part.

3 Select the playback title or chapter from the top menu for playback.

Select

Playback

~ , Playback

Playing BDs and DVD-Videos BD DVD-V

1.DBP-A100_E3_ENG_007.indd 36 2010/08/12 19:20:22

ENGLISH

37

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

If you play a disc that does not have the area or layer you selected, choose the playback area or layer to play in the order Multi, Stereo, CD.

The area/layer selected with remains in the memory even when the power is turned off.

n When Viewing the Text or Playback Time Display See Media Player Display (vpage 35).

Playing Super Audio CDs SA-CD

1 Playback preparation (Before Playing a Disc vpage 34).

2 Select the playback area and layer with .

Multi : Plays the multi-channel area of the HD layer.

Stereo : Plays the 2-channel area of the HD layer.

CD : Plays the CD layer.

b Pressing plays the selected area/layer.

n When Viewing the Playback Time Display See Media Player Display (vpage 35).

Playing CDs CD

1 Playback preparation (Before Playing a Disc vpage 34).

2 Press . Playback begins.

1 Playback preparation (Before Playing a Disc vpage 34).

2 Select the part to play with .

Audio : Plays the audio part.

Video : Plays the video part.

3 If a top menu is available, select the playback group and track from the top menu, and then play the disc.

Select

Set or playback

~ , Playback

n When Viewing the Text or Playback Time Display See Information Bar Display (vpage 34).

Playing DVD-Audio DVD-A

Changing the Group/Track

The search mode selected with this operation is memorized until the unit goes into standby or the disc tray is opened.

1 While stopped or during playback, select the search mode with . The search mode is displayed in the top-right of the screen.

b The search mode changes each time you press .

Group search mode Track search mode

2 Select the playback group and track from the top menu, and then play the disc.

~ ,

Plays the group or track of the pressed number. b See Looking for Specific Sections with the Search Modes (vpage 42) for instructions on inputting numbers.

1.DBP-A100_E3_ENG_007.indd 37 2010/08/12 19:20:22

ENGLISH

38

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

n If you enter the wrong password

Press to erase the input number and then enter the correct number.

Playing Bonus Group

DVD-Audio discs may have a bonus group that can be played after entering a password.

Selecting Still Images

When a DVD-Audio disc has still images on it, you can choose the image to display.

1 While stopped, select Group with .

2 Enter the bonus group number with ~ , .

Group /5

3 Using ~ enter the 4-digit password, and then press . Playback will begin from the 1st track of the selected group.

b The password may also be entered on the menu screen by following the on-screen instructions.

Press during playback. The next still image is displayed.

Playing DVD-Audio Playing Files n About the File Display Limits to the number of folders and files that can be displayed by the DBP-A100 are as follows. (The limited number includes the root folder.)

Number of folder directory levels 8 levels Number of folders 999 Number of files 9999 Number characters per

File name, Folder name 32 Artist name, title, etc. 60

b Text longer than one line is scroll-displayed. b If characters not supported on the menu screen are included in a file name, title, artist name or album title, they are not displayed correctly.

This enables you to play high quality audio by stopping the video signal, etc., output, and outputting the analog audio signal only.

You cannot use while the GUI menu is displayed. With Pure Direct on and the main unit display set to off, indicators

other than power are turned off. The pure direct setting returns to Off when the DBP-A100 is put

in standby mode.

Press while stopped and then select the pure direct mode.

Off :

On :

User Preset 1 :

User Preset 2

This turns off the pure direct function.

This turns off the digital signal output, video signal output and display on the display screen. Operates with the registered pure direct setting. (Pure Direct Setup vpage 28)

Playing High-Quality Audio (Pure Direct Function)

BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX JPEG

1.DBP-A100_E3_ENG_007.indd 38 2010/08/12 19:20:22

ENGLISH

39

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

DATA DISC

Root/

Folder A Folder B

File A File B File C File D File E DivX File 1 JPEG File 1

Folder C Folder D Folder E Folder F Folder G

[1/18] DATA DISC

Folder A

File A File B File C File D File E DivX File 1 JPEG File 1

[1/12]

GFile browser screenH GItem selected screenH

About folder and file displays

n File Browser Screen

Media currently playing

Current level folder/file list

Folder

Selected file

File for playback

File types

Random playback mode

For information on playable media and files, see Playable Media (vpage 3, 4).

,

,

LPCM file MP3 file WMA file AAC file JPEG file DivX file Folder

Random playback off Random playback on

Repeat Off Track Repeat All Repeat

Play Pause Stop Fast-reverse Fast-forward

Operation during playback differs depending on the file being played. See Operation During Playback (vpage 40).

Playing Files DVD CD SD

MP3 WMA AAC LPCM DivX JPEG

1 Turn the DBP-A100 on.

2 Press , and select the playback media mode.

DISC MODE : Plays discs

SD CARD MODE : Plays SD memory cards

3 Load media. The file browser screen will appear.

b See Inserting a Disc and Inserting an SD Memory Card (vpage 6) for how to load media b If file browser screen does not appear, press

.

4 Select the folder of the data to be played and press .

, Display screen selection

To next level up

To next level down

To the top level

5 Press to select a playback mode.

All Track Mode : Plays back all files on the media.

Folder Mode : Plays back files in the selected folder. The folder icon is displayed in the playback mode indicator.

6 Selecting and playing files.

Select

, Set or playback

Files inside selected

folder

Selected folder number/ Total number of folders

b q b w Repeat playback mode

Playback mode

n To Switch the Page Displayed Press to display the next page. Press to display the previous page.

Current level folder name

Press .

Press .

Folder Mode

Press .

Folder Mode

All Track Mode

Folder mode

File Playback

1.DBP-A100_E3_ENG_007.indd 39 2010/08/12 19:20:23

ENGLISH

40

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

DATA DISC

Single Elapsed 00:25

Song Artist Album

Now PlayingTrack 2

File Playback

Screen Display During Playback

Display during Playback of Audio Files

Track number during playback

Display of DivX Files and JPEG Files

Displays video being played.

Displays still image being played

Operation During Playback

Audio file and DivX file operation MP3 WMA AAC LPCM DivX

n Playback in Any Order (Random Playback)

Press while stopped and then press or .

n Playing Back Repeatedly (Repeat Playback)

Press to select the repeat playback mode.

DATA DISC

Now PlayingTrack 2

Set the image display time on the GUI menu with: Display Setup Slide Show Time (vpage 30).

With a large image file, the image may display for longer than the set time.

Playback mode display

File name/Artist name/ Album Title

n Changing the Still Image being Played Press , .

Before playback or display of next image.

n Pausing the Display Press .

To cancel pause, press .

n Changing the Still Image Orientation

Press .

180 rotation

Rotates 90 left

Rotates 90 right

n Returning to the Thumbnail Display Screen

Press .

1 Press while the file browser screen is displayed. A thumbnail screen will appear.

b Pressing while the thumbnail screen is displayed returns you to the file browser screen.

1/25

2 Use to select still images.

3 Press . Displays selected image on full screen.

Elapsed time and remaining time

NOTE The display of JPEG image data of cover art, etc., recorded on the file being played is enabled when playing MP3 and AAC audio files.

Displays the JPEG image data of cover art, etc., recorded on the file being played.

Playing JPEG Files (Still Image) JPEG

Slide-show playback of JPEG still image files stored on CD-R/-RW, DVD-R/-RW/+R/+RW disc and SD Memory Card.

1.DBP-A100_E3_ENG_007.indd 40 2010/08/12 19:20:24

ENGLISH

41

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifi cations

Playback

Operations Enabled During Playback

If the video is blurred while paused, stop playback and press , then, on the GUI menu, change Display Setup Still Mode Field (vpage 30).

n About the Resume Function BD DVD-A DVD-V DVD DivX

When playback is stopped, the stop position is memorized.

The 1 indicator fl ashes on the display. To resume play from the stop position, press while stopped.

n To Cancel the Resume Function Perform one of the following operations.

Press while stopped. Open the disc tray. Change the playback media mode with . Remove the SD Memory Card.

Skipping to the start of a title or group may be prohibited, depending on the disc.

The resume function does not work with menu playback or BD-J (Blu-ray Disc Java) compatible discs.

The resume function remains valid even when the standby mode is set. With DivX fi les, however, the resume function is cancelled even when the standby mode is set.

The resume function is cancelled when the power is cut off by unplugging the power cord.

Pausing BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX

Stopping ( Resume Function) BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX

Skipping to a Desired Chapter/Track/File

BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX

Press during playback. The 3 indicator will light on the display.

b Resume normal playback by pressing .

Press during playback. Playback stops.

During playback, press or .

Playback begins from the start of the chapter/ track/fi le being played. Playback begins from the start of the next chapter/track/fi le.

b Continue pressing and skip to the chapter/track/fi le by the number of times pressed.

Operations Enabled During Playback n Pausing (vpage 41) n Stopping (Resume Function) (vpage 41) n Skipping to a Desired Chapter/Track/File (vpage 41)

n Finding Specifi c Sections with Search Modes (vpage 42)

n Memorizing Locations to Replay (Marker Function) (vpage 43)

n Fast-Forward/Fast-Reverse (vpage 43) n Playing Images Frame by Frame (vpage 43) n Slow Forward/Slow Reverse Playback (vpage 43)

n Playback in Random Order (Random Playback) (vpage 44)

n Playing Back Repeatedly (Repeat Playback) (vpage 44)

n Repeat Playback between Specifi ed Points (A-B Repeat) (vpage 44)

n Playing Back in your Preferred Order (Program Playback) (vpage 45)

n Switching Audio (vpage 45, 46) n Changing the Subtitles and Subtitle Style (vpage 46)

n Switching the Angle (vpage 47) n Changing the Brightness of the Display (Dimmer Control) (vpage 47)

1.DBP-A100_E3_ENG_007.indd 41 2010/08/12 19:20:27

ENGLISH

42

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Finding Specific Sections with Search Modes

BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX JPEG

1 During playback, press and then select the search mode. The search mode setting bar is displayed at the top of the screen. The search mode changes each time the button is pressed.

n Chapter search

Chapter /21

n Title search

Title /5

n Track search

Track /15

n Group search

Group /5

n Time search

Total Time 10 : 15 11Time Search : :

n Marker search

Marker

Time : :

1 2 3 4 5 6 7 8 AC

GSearch mode-compatible media and filesH Media / file

Search mode

BD

DVD-V

DVD

DVD-A SA-CD

CD

DivX MP3 WMA LPCM JPEG AAC

Chapter search S

Title search S

Time search S S S S

Marker search b S S S

Track search S S S S

Group search S

Operations Enabled During Playback

Entering numbers To enter 3 z

To enter 26 z or

To enter 138 z

z: Depending on number of recorded songs or chapters, you may not need to use the ENTER button.

The search modes do not operate during program or random playback. Use , to cue.

Time search works with title and track playback time. It is not does not work with chapter playback time.

Search modes may not operate with some discs. b About Marker Search Plays back from your selected marker number.

When the entry mode for chapter/title/track/ group search continues for about 5 seconds with no operation, it is cancelled.

When the power is set to standby or the disc is removed, the set marker is deleted.

2 Enter search conditions or make settings on the search mode setting bar. Once an entry is finalized, it searches for the specified location.

~ , Number entry

Finalizes number

Marker number selection

Finalizes the marker number or plays back

Cancels the marker number

1.DBP-A100_E3_ENG_007.indd 42 2010/08/12 19:20:27

ENGLISH

43

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Operations Enabled During Playback

You cannot fast-forward/fast-reverse across files or tracks during program or random playback.

Fast-forward/fast-reverse may be disabled with some DivX files. Audio is not output during fast-forward/fast-reverse of a BD or

DVD.

Frame by frame reverse playback is not available with the DBP-A100.

If the video is shaky during frame by frame playback, stop playback, press , then on the GUI menu, change Display Setup Still Mode Field (vpage 30).

Fast-Forward/Fast-Reverse BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX

During playback, press or . The fast-forward/fast-reverse speed changes

each time the button is pressed. The speed varies with the disc and file.

b Resume normal playback by pressing .

Press while paused. The disc advances frame by frame each time the button is pressed.

b Resume normal playback by pressing .

Playing Images Frame by Frame BD DVD-V DivX

Subtitles may not appear depending on the locations you have memorized.

The markers you have set will be erased if you turn the power to standby or eject the disc.

The marker function does not operate across titles and groups. Marker search can only be performed during playback.

You can attach a marker to a location you want to view or hear again, so that playback begins at that location.

n To Play Back Memorized Locations

Use to select the marker number, then press .

n To erase markers Select the number you want to erase, and then press .

n To erase all markers Select AC and press .1 During playback, press , and then select

Marker. The search mode setting bar is displayed at the top of the screen.

Marker

Time : :

1 2 3 4 5 6 7 8 AC

2 Use to select a number.

Marker

Time : :

1 2 3 4 5 6 7 8 AC

b Numbers you have already set will be displayed as .

3 Press at the location you want to memorize. The location is registered for the selected marker number.

b The elapsed playing time at the set location is displayed.

Marker

Time 1 : 23 : 45

1 3 4 5 6 7 8 AC

Memorizing Locations to Replay (Marker Function)

BD DVD-V DVD-A DVD SD DivX

Audio is not output during slow-forward/slow-reverse playback. If the video is blurred during slow-forward/slow-reverse playback,

stop playback and press , then on the GUI menu, change Display Setup Still Mode Field (vpage 30).

Slow-Forward/Slow-Reverse Playback BD DVD-V DVD

Press while paused. The speed changes each time the button is pressed.

b The speed of slow-reverse playback does not change. b Resume normal playback by pressing .

1.DBP-A100_E3_ENG_007.indd 43 2010/08/12 19:20:28

ENGLISH

44

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Operations Enabled During Playback

Some repeat modes may not be accessible depending on some discs. With some discs, even when set to repeat playback, the disc may not return to the start of title or chapter, and may advance to the next scene.

Repeat playback is not available during A-B repeat playback.

You cannot skip a title/file with A-B repeat. If you perform a search operation during A-B repeat playback, A-B

repeat playback is cancelled. A-B repeat playback may not be available with some scenes. A-B repeat playback of MP3/WMA/AAC/JPEG/LPCM files is not

available. A-B repeat playback is not available during repeat playback. A-B repeat playback may not be available with some DivX files.

About Repeat Modes

The available repeat modes vary depending on the disc or file you are playing.

Media/File

Mode

BD

DVD-V

DVD

DVD-A SA-CD

CD

MP3 WMA AAC

LPCM DivX JPEG

Display

Chapter repeat S

Track repeat S S S

Title repeat S

Group repeat S

All repeat S S

Playing Repeatedly (Repeat Playback)

BD DVD-A DVD-V DVD SA-CD CD SD

MP3 WMA AAC LPCM DivX JPEG

Playing Repeatedly Between Specified Points (A-B Repeat)

BD DVD-A DVD-V DVD SA-CD CD SD DivX

1 Press during playback. The repeat mode icon is displayed at the top of the screen. The repeat mode changes each time the button is pressed.

DATA DISC

Single Elapsed 00:35

Song Artist Album

Now PlayingTrack 2

2 Press to select the repeat mode.

b To resume normal playback, press , and select Repeat Off.

1 During playback, press at the desired starting point (A). The A indicator will light on the display.

b To cancel the starting point (A), press .

2 Press again at the desired ending point (B). The B indicator will light on the display, and A-B repeat playback will start.

b To resume normal playback, press , and select Repeat Off.

Random playback may not be available with some discs.

n Resuming Normal Playback

Press while stopped.

Playing in Random Order (Random Playback)

SA-CD CD SD MP3 WMA AAC LPCM DivX

1 Press while stopped. The RAND lights on the display and Random Mode is displayed on the screen.

2 Press to play. Repeat mode

1.DBP-A100_E3_ENG_007.indd 44 2010/08/12 19:20:28

ENGLISH

45

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Switching a BDs Primary Audio/Secondary Audio

With discs and files that have multiple audio track recording, you can change the audio during playback. With BD, you can set playback to sub-track audio, such as interactive audio and commentary audio, etc., with Secondary.

Operations Enabled During Playback

You can program up to a maximum of 20 tracks.

n Checking the Program Contents Press during playback. The program setting screen will appear.

Playing in Your Preferred Order (Program Playback)

SA-CD CD

Switching Audio BD DVD-A DVD-V DVD CD SD DivX

1 Press while stopped during stop. The PROG indicator lights on the display, and the program setting screen appears.

PROGRAM

Enter Clear

Track 1 - 16 Total Time 3 : 32 No.

1 2 3 4 5 6 7 8 9

10

Track 5 2 3 - -

No. 11 12 13 14 15 16 17 18 19 20

Track

0-9 CLEAR+10

2 Enter the track numbers you want to program on the program setting screen.

~ , Entry

Set entry

3 Press . Playback begins in the programmed order.

1 During playback of Primary Audio/Secondary Audio title, press . The audio number currently being played is displayed.

Audio

Primary 1/5 : Dolby Digital 3/2.1 English

Secondary /1 : Off

2 Press , select Primary or Secondary, and then press .

Audio

Primary 1/5 : Dolby Digital 3/2.1 English

Secondary /1 : Off

b If multiple audio items are recorded, the current audio number/number of recorded audio items is displayed. b When BD Audio Mode is set to HD Audio Output (vpage 32), Secondary audio is not output.

n Erasing Programmed Tracks One by One

Press during stop.

n Erasing All Programming

Press .

You can also check the contents of the program on the units display. Press while stopped.

Depending on the disc, audio switching may be restricted to operation of the disc menu. In this case, switch the audio on the disc menu.

Be sure to set BD Audio Mode to Mix Audio Output (vpage 32) for playing back secondary audio.

Depending on the BD, even if picture-in-picture playback is set to Off, Secondary Audio only may be output.

3 Select your desired audio language with .

Audio

Primary 2/5 : Dolby Digital 3/2.1 Japanese

Secondary /1 : Off

4 Press . The setup screen disappears.

1.DBP-A100_E3_ENG_007.indd 45 2010/08/12 19:20:29

ENGLISH

46

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Switching a BDs Primary Subtitle/Secondary Subtitle and Subtitle Style

If a disc does not include subtitles and/or subtitle style, Not Available is displayed.

Depending on the disc, subtitle switching may be restricted to operation of the disc menu. In this case, switch the subtitles on the disc menu. During playback of a disc or file with recorded subtitles, you can

switch the subtitles on/off as well as the subtitle language. With BD, you can change the style of displayed subtitles.

Operations Enabled During Playback

Changing the Subtitles and Subtitle Style

BD DVD-V SD DivX

1 Press during playback. The subtitle number currently being played is displayed.

Subtitle

Primary 1/5 : English

Off Secondary Style

/1 : 1 :

2 With , select Primary, Secondary and Style, and then press .

Subtitle

Primary 1/5 : English

Off Secondary Style

/1 : 1 :

3 Use to select your desired subtitle language and subtitle style.

Subtitle

Primary Off Secondary

Style /1 :

1 :

1/5 : English

4 Press . The setup screen disappears.

Selecting DVD-Video and DivX File Subtitles

With a DivX file, the currently playing subtitle number and number of recorded subtitles are displayed; the language option is not displayed.

1 Press during playback. The subtitle number currently being played is displayed.

Subtitle /5 : Off

2 Use to select subtitles.

Subtitle

1/5 : English

With DVD-R/-RW with bilingual soundtrack recording, you can switch between Main (main audio) and Sub (secondary audio) or Main/Sub (main audio + secondary audio).

In CD audio mode, you can switch to Stereo, L-ch (left channel) or R-ch (right channel).

With a DivX file, MP3 or Dolby Digital audio formats and the number of recorded audio modes are displayed. appears for audio other than these.

With DTS-CD (5.1 music disc), you cannot switch audio modes.

Audio Switching (Media Other than BD)

1 Press during playback. The audio number currently being played is displayed.

GExampleH DVD

Audio

: Dolby Digital1/5 3/2.1 English

2 Use to select audio

GExampleH DVD-Video

Audio

: Dolby Digital2/5 3/2.1 Japanese

3 Press . The setup screen disappears.

1.DBP-A100_E3_ENG_007.indd 46 2010/08/12 19:20:30

ENGLISH

47

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback

Operations Enabled During Playback

During playback of a BD or DVD-Video recorded with several camera angles, you can change the angle.

Switching the Angle BD DVD-V

NOTE Angle changing may be restricted, depending on the disc.

1 Press during playback. The angle number currently being played is displayed.

Angle 1/3

2 Use to select angle.

Angle 2/3

3 Press . The setup screen disappears.

Press . The brightness changes each time the button is pressed.

Normal Dim Dark Off

Changing the Brightness of the Display (Dimmer Control)

Even when Off is selected, the status of operations that are performed appears momentarily on the display if Display Setup Temporary Display on the GUI menu is set to On (vpage 30).

DBP-A100 has Web control function support that allows you to operate DBP-A100 via LAN from your PC, PDA, iPod touch, and iPhone.

Operating DBP-A100 using a PC browser Connect DBP-A100 to the network. (Connecting to the Network

(vpage 19). Please use the Internet Explorer or FireFox browser.

Preparation Press on the remote control to display the GUI menu.

1 Check the IP address of DBP-A100. (vpage 30) Select Network Setup from the GUI menu and then select

IP Address. The address displayed for Control is the IP address of DBP-

A100.

2 Enter the DBP-A100 IP address in browsers address box.

For example, if the IP address of DBP-A100 is 192.168.11.217, enter http://192.168.11.217.

The top menu appears on the PC screen.

NOTE If you set DHCP in Network Setup of the GUI menu to On, the IP address of DBP-A100 will change every time DBP-A100 is connected. Check the IP address, whenever you use the Web control function. (vpage 30)

3 Click the menu you want to operate.

Player Control Click to operate DBP-A100.

Setup Menu Click to operate the Setup Menu.

PDA Menu Click to operate DBP-A100 using a PDA terminal.

Player Control You can perform basic operations of DBP-A100 from a PC screen using the Player Control menu. Each operation button on this screen functions in the same way as the buttons on DBP-A100 and remote control.

q

w e

r

q Shortcut key to each menu. w Click when you update to the latest information. e Click to add a setting to Favorites. r To turn on power using the ON button of a PC browser, set Power

Saving in Other Setup of the GUI menu to Quick Start Mode. (vpage 31)

Web control function

1.DBP-A100_E3_ENG_007.indd 47 2010/08/12 19:20:30

ENGLISH

48

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

q Click the menu from which you want to make settings. The display on the right becomes each setting screen. w SAVE: Click to save settings. The settings are saved on your PC. LOAD: Click to recall settings. e Click the setting item. r Click f and select from the displayed items. t Enter values or click o or p to make the setting. Click Set to set the values. y Click to return to the top menu.

PDA Menu You can perform basic operations of DBP-A100 from a PDA using the PDA Menu screen. n Player

Buttons for switching the displayed screens

n Func.

Buttons for switching the displayed screens

Operating DBP-A100 using the iPod browser

You can perform basic operations of DBP-A100 using network-ready iPod products such as iPhone and iPod touch.

Before starting the operation, connect DBP-A100 to the network. (Connecting to the Network vpage 19).

iPhone and iPod touch is a trademark or registered trademark of Apple Inc. in the U.S. and other countries.

Preparation Press on the remote control to display the GUI menu.

1 Check the IP address of DBP-A100. (vpage 30) Select Network Setup from the GUI menu and then select IP Address. The address displayed for Control is the IP address of DBP- A100.

2 Enter the DBP-A100 IP address in browsers address box.

For example, if the IP address of DBP-A100 is 192.168.11.217, enter http://192.168.11.217.

The top menu appears on the PC screen.

NOTE If you set DHCP in Network Setup of the GUI menu to On, the IP address of DBP-A100 will change every time DBP-A100 is connected. Check the IP address, whenever you use the Web control function. (vpage 30)

PLAYER Click to display the screen used for basic playback operation.

OPTION Click to operate random or repeat playback and perform output signal- related settings.

MODE Click to perform advanced settings.

For details on setting items, see the Owners Manual. To switch to another mode while the operation screen of each

mode is being displayed, use the iPod browsers back button 0 to return to the top menu.

Operaation the iPod menu screen

n PLAYER n OPTION n MODE

Switching audio (vpage 45) Switching subtitles and subtitle style (vpage 46) Switching the angle (vpage 47)

Playback

Web control function

Setup Menu You can perform various settings of DBP-A100 on the Setup Menu screen. For further information about setting items, see GUI Menu Setup on page v21.

e

r

t

w

y

q

1.DBP-A100_E3_ENG_007.indd 48 2010/08/12 19:20:31

ENGLISH

49

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

When you make HDMI connections with a TV or AV Amp compatible with DBP-A100 and HDMI control functions, you can perform the following operations by setting up the HDMI control functions of each device.

n TV or AV Amp power is turned on by operating the DBP-A100 and functions change with DBP-A100 input.

n Turning off the TVs power turns the DBP-A100s power to standby.

n Operating the DBP-A100 via the TVs remote control. (When the TVs remote control has player operation buttons)

If the HDMI control function does not operate properly, check the following points. Is the TV or AV Amp compatible with the HDMI control function? Are the HDMI control function settings of all equipment correct?

(Step 3) After setting, did you add another HDMI device connection or make

any changes in the connections? If so make the settings again.

HDMI Control Functions

NOTE The HDMI control function controls operations of a TV that is

compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control.

Some functions may not operate depending on the connected TV or AV Amp. Check the owners manual of each device for details beforehand.

When Other Setup Power Saving on the GUI menu is set to Power Saving Standby or Normal Standby (vpage 31), the players power cannot be turned on using the HDMI control function.

When HDMI Setup HDMI Control Power Off Control on the GUI menu is set to Off (vpage 24), the DBP-A100 does not go to standby even if the connected device is in the standby mode.

When DENON LINK Setup DENON LINK Mode on the GUI menu is set to 4th, the HDMI control function is enabled for the connected devices.

1 Set the HDMI control function to On. On the GUI menu, set HDMI Setup HDMI Control (vpage 24).

2 Turn on all the equipment connected by HDMI cable.

3 Set the HDMI control function for all equipment connected by HDMI cable. On the GUI menu, set the DBP-A100 with HDMI Setup HDMI Control (vpage 24).

b Please refer to the owners manuals of connected devices for how to make settings. b Carry out Steps 2 and 3 if any of the equipment was unplugged.

4 To ensure that the DBP-A100s HDMI video output is projected on the TV screen, change the input function of the TV and AV Amp.

5 When you turn the TVs power to standby, check that the power of the DBP-A100 and AV Amp also goes on standby.

H D

M I C

ontrol Function

1.DBP-A100_E3_ENG_007.indd 49 2010/08/12 19:20:31

ENGLISH

50

Troubleshooting H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Playback H

D M

I C ontrol Function

Blu-ray Disc and are trademarks.

is a trademark of the DVD Format / Logo licensing Corporation.

HDMI, theHDMILogoandHigh-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLCintheUnitedStatesandothercountries.

Java and all other trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and/or other countries.

Manufactured under license from Dolby Laboratories.Dolby,ProLogicandthe double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,392,195; 7,272,567; 7,333,929; 7,212,872 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks, & DTS-HD, DTS-HD Master Audio | Essential and the DTS logos are trademarks of DTS, Inc. Product includes software. DTS, Inc. All Rights Reserved.

Windows Media and the Windows logo are trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

DivX, DivX Certified, and associated logos are registered trademarks of DivX, Inc. and are used under license.

DENON LINK is a unique digital, balanced transfer type of interface developed by DENON. It offers high-speed, high-quality transfer of digital audio data with low signal loss. It can be used with DENON AV Amp equipped with a special DENON LINK connector via a single cable to enable playback with high sound quality. It allows digital transfer of the 192 kHz/24 bit 2-channel digital signals of DVD-Audio discs, PCM multi-channel signals, etc. Full-spec digital transfer of the audio contents of Super Audio CD is possible by connecting a player equipped for DENON LINK 3rd Generation. During processing of DENON LINK, the DENON LINK indicator of the display lights. DENON LINK 4th uses the clock of the AV Amp connected by DENON LINK to achieve HDMI signal transfer with little jitter when playing BD.

Advanced AL24 Processing installed in the analog output dramatically improves the information volume on the time axis with independent speed signal detection and processing technology for the PCM signal playback system. In addition to data expansion to 24 bit, it conducts natural interpolation processing with no loss of original data by digital upsampling. The Advanced AL24 indicator lights on the front panel when Advanced AL24 Processing is in operation.

This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.

Other Information

About Advanced AL24 Processing

Trademark Information

About Copyright Protection Technology

About DENON LINK , HDCD, High Definition Compatible Digital and Microsoft are either registered trademarks or trademarks of Microsoft Corporation, Inc. in the United States and/or other countries. HDCD system manufactured under license from Microsoft Corporation, Inc. This product is covered by one or more of the following: In the USA: 5,479,168, 5,638,074, 5,640,161, 5,808,574, 5,838,274, 5,854,600, 5,864,311, 5,872,531, and in Australia: 669114. Other patents pending.

AVCHD and the AVCHD logo are trademarks of Panasonic Corporation and Sony Corporation.

BONUSVIEW is the trademark of Blu-ray Disc Association.

The BD-LIVE logo is a trademark of Blu- ray Disc Association.

The SDHC-logo is trademarkedk.

This product uses the following technologies:

Inform ation

1.DBP-A100_E3_ENG_007.indd 50 2010/08/12 19:20:31

ENGLISH

51

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Language Code List

Language Code

A Abkhazian 4748 Afar 4747 Afrikaans 4752 Albanian 6563 Amharic 4759 Arabic 4764 Armenian 5471 Assamese 4765 Aymara 4771 Azerbaijani 4772

B Bashkir 4847 Basque 5167 Bengali;Bangla 4860 Bhutani 5072 Bihari 4854 Bislama 4855 Breton 4864 Bulgarian 4853 Burmese 5971 Belarusian 4851

C Cambodian 5759 Catalan 4947 Chinese 7254 Corsican 4961 Croatian 5464 Czech 4965

D Danish 5047 Dutch 6058

E English 5160 Esperanto 5161 Estonian 5166

F Faroese 5261 Fiji 5256 Finnish 5255 French 5264 Frisian 5271

G Galician 5358 Georgian 5747 German 5051 Greek 5158 Greenlandic 5758 Guarani 5360 Gujarati 5367

H Hausa 5447 Hebrew 5569 Hindi 5455 Hungarian 5467

Language Code

I Icelandic 5565 Indonesian 5560 Interlingua 5547 Interlingue 5551 Inupiak 5557 Irish 5347 Italian 5566

J Japanese 5647 Javanese 5669

K Kannada 5760 Kashmiri 5765 Kazakh 5757 Kinyarwanda 6469 Kirghiz 5771 Kirundi 6460 Korean 5761 Kurdish 5767

L Laothian 5861 Latin 5847 Latvian; Lettish 5868 Lingala 5860 Lithuanian 5866

M Macedonian 5957 Malagasy 5953 Malay 5965 Malayalam 5958 Maltese 5966 Maori 5955 Marathi 5964 Moldavian 5961 Mongolian 5960

N Nauru 6047 Nepali 6051 Norwegian 6061

O Occitan 6149 Oriya 6164 Oromo (Afan) 6159

P Punjabi 6247 Pashto; Pushto 6265 Persian 5247 Polish 6258 Portuguese 6266

Q Quechua 6367

R Rhaeto-Romance 6459 Romanian 6461 Russian 6467

Language Code

S Samoan 6559 Sangho 6553 Sanskrit 6547 Scots Gaelic 5350 Serbian 6564 Serbo-Croatian 6554 Sesotho 6566 Setswana 6660 Shona 6560 Sindhi 6550 Singhalese 6555 Siswat 6565 Slovak 6557 Slovenian 6558 Somali 6561 Spanish 5165 Sundanese 6567 Swahili 6569 Swedish 6568

T Tagalog 6658 Tajik 6653 Tamil 6647 Tatar 6666 Telugu 6651 Thai 6654 Tibetan 4861 Tigrinya 6655 Tonga 6661 Tsonga 6665 Turkish 6664 Turkmen 6657 Twi 6669

U Ukrainian 6757 Urdu 6764 Uzbek 6772

V Vietnamese 6855 Volapuk 6861

W Welsh 4971 Wolof 6961

X Xhosa 7054

Y Yiddish 5655 Yoruba 7161

Z Zulu 7267

Inform ation

1.DBP-A100_E3_ENG_007.indd 51 2010/08/12 19:20:32

ENGLISH

52

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Country Code

A AFGHANISTAN AF LAND ISLANDS AX ALBANIA AL ALGERIA DZ AMERICAN SAMOA AS ANDORRA AD ANGOLA AO ANGUILLA AI ANTARCTICA AQ ANTIGUA AND BARBUDA AG ARMENIA AM ARUBA AW AZERBAIJAN AZ

B BAHAMAS BS BAHRAIN BH BANGLADESH BD BARBADOS BB BELARUS BY BELIZE BZ BENIN BJ BERMUDA BM BHUTAN BT BOLIVIA BO BOSNIA AND HERZEGOVINA BA BOTSWANA BW BOUVET ISLAND BV BRITISH INDIAN OCEAN TERRITORY

IO

BRUNEI DARUSSALAM BN BULGARIA BG BURKINA FASO BF BURUNDI BI

C CAMBODIA KH CAMEROON CM CAPE VERDE CV CAYMAN ISLANDS KY CENTRAL AFRICAN REPUBLIC

CF

CHAD TD CHRISTMAS ISLAND CX COCOS (KEELING) ISLANDS CC COMOROS KM CONGO CG CONGO, THE DEMOCRATIC REPUBLIC OF THE

CD

COOK ISLANDS CK COSTA RICA CR CTE DIVOIRE CI CROATIA HR

Country Code CUBA CU CYPRUS CY CZECH REPUBLIC CZ

D DJIBOUTI DJ DOMINICA DM DOMINICAN REPUBLIC DO

E ECUADOR EC EGYPT EG EL SALVADOR SV EQUATORIAL GUINEA GQ ERITREA ER ESTONIA EE ETHIOPIA ET

F FALKLAND ISLANDS (MALVINAS)

FK

FAROE ISLANDS FO FIJI FJ FRENCH GUIANA GF FRENCH POLYNESIA PF FRENCH SOUTHERN TERRITORIES

TF

G GABON GA GAMBIA GM GEORGIA GE GHANA GH GIBRALTAR GI GREENLAND GL GRENADA GD GUADELOUPE GP GUAM GU GUATEMALA GT GUERNSEY GG GUINEA GN GUINEA-BISSAU GW GUYANA GY

H HAITI HT HEARD ISLAND AND MCDONALD ISLANDS

HM

HOLY SEE (VATICAN CITY STATE)

VA

HONDURAS HN HUNGARY HU

I ICELAND IS IRAN, ISLAMIC REPUBLIC OF

IR

IRAQ IQ ISLE OF MAN IM ISRAEL IL

J JAMAICA JM JERSEY JE

Country Code JORDAN JO

K KAZAKHSTAN KZ KENYA KE KIRIBATI KI KOREA, DEMOCRATIC PEOPLES REPUBLIC OF

KP

KUWAIT KW KYRGYZSTAN KG

L LAO PEOPLES DEMOCRATIC REPUBLIC

LA

LATVIA LV LEBANON LB LESOTHO LS LIBERIA LR LIBYAN ARAB JAMAHIRIYA LY LIECHTENSTEIN LI LITHUANIA LT

M MACAO MO MACEDONIA, THE FORMER YUGOSLAV REPUBLIC OF

MK

MADAGASCAR MG MALAWI MW MALDIVES MV MALI ML MALTA MT MARSHALL ISLANDS MH MARTINIQUE MQ MAURITANIA MR MAURITIUS MU MAYOTTE YT MICRONESIA, FEDERATED STATES OF

FM

MOLDOVA MD MONACO MC MONGOLIA MN MONTENEGRO ME MONTSERRAT MS MOROCCO MA MOZAMBIQUE MZ MYANMAR MM

N NAMIBIA NA NAURU NR NEPAL NP NETHERLANDS ANTILLES AN NEW CALEDONIA NC NICARAGUA NI NIGER NE NIGERIA NG NIUE NU

Country Code NORFOLK ISLAND NF NORTHERN MARIANA ISLANDS

MP

O OMAN OM

P PALAU PW PALESTINIAN TERRITORY, OCCUPIED

PS

PANAMA PA PAPUA NEW GUINEA PG PARAGUAY PY PERU PE PITCAIRN PN PUERTO RICO PR

Q QATAR QA

R RUNION RE ROMANIA RO RWANDA RW

S SAINT BARTHLEMY BL SAINT HELENA SH SAINT KITTS AND NEVIS KN SAINT LUCIA LC SAINT MARTIN MF SAINT PIERRE AND MIQUELON

PM

SAINT VINCENT AND THE GRENADINES

VC

SAMOA WS SAN MARINO SM SAO TOME AND PRINCIPE ST SAUDI ARABIA SA SENEGAL SN SERBIA RS SEYCHELLES SC SIERRA LEONE SL SLOVAKIA SK SLOVENIA SI SOLOMON ISLANDS SB SOMALIA SO SOUTH AFRICA ZA SOUTH GEORGIA AND THE SOUTH SANDWICH ISLANDS

GS

SRI LANKA LK SUDAN SD SURINAME SR SVALBARD AND JAN MAYEN

SJ

SWAZILAND SZ SYRIAN ARAB REPUBLIC SY

Country Code

T TAJIKISTAN TJ TANZANIA, UNITED REPUBLIC OF

TZ

TIMOR-LESTE TL TOGO TG TOKELAU TK TONGA TO TRINIDAD AND TOBAGO TT TUNISIA TN TURKEY TR TURKMENISTAN TM TURKS AND CAICOS ISLANDS

TC

TUVALU TV

U UGANDA UG UKRAINE UA UNITED ARAB EMIRATES AE UNITED STATES MINOR OUTLYING ISLANDS

UM

URUGUAY UY UZBEKISTAN UZ

V VANUATU VU VATICAN CITY STATE VA VENEZUELA VE VIET NAM VN VIRGIN ISLANDS, BRITISH VG VIRGIN ISLANDS, U.S. VI

W WALLIS AND FUTUNA WF WESTERN SAHARA EH

Y YEMEN YE

Z ZAMBIA ZM ZIMBABWE ZW

Country Code List

Inform ation

1.DBP-A100_E3_ENG_007.indd 52 2010/08/12 19:20:32

ENGLISH

53

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Numerics 4:3 letterbox When a wide (16:9) disc is played on the DBP-A100 while connected to a 4:3 TV, this function displays the image with a black area at the top and bottom. 4:3 pan-and-scan When a wide (16 : 9) disc is played on the DBP-A100 while connected to a 4:3 TV, this function cuts the left and right of the displayed image to the 4 : 3 size according to the disc's control information.

A Anamorphic lens This lens enlarges the 16:9 image to a 2.35:1 image when projecting the image with a projector. Aspect ratio This is the length and width ratio of the TV screen. The conventional TV screen's ratio is 4:3 and a wide screen TV's screen ratio is 16:9.

B BD-J (Java) BD-Videos offer fun software with more interactive functions (games) that use Java applications. BD-LIVE The DBP-A100 can be connected to the Internet to enjoy a number of features, including additional contents such as special videos or subtitles, network games, etc. Bit rate This is the amount of video or audio data recorded on a disc that is read in one second. Blu-ray disc This is a one-sided, one-layer disc with 25GB capacity for recording high vision video movie and games. Bonus View Special images for BD-Videos. It includes comments from the movie director, simultaneously developing sub-stories, and images from different angles.

C Chapter This is a break intended by the producer, who organizes the titles of BD or DVD-Videos. The chapter search function searches for the beginning of this break.

D Deep Color This technology allows expression of more colors than the conventional 8-bit and can reproduce more natural colors without any color streaking. DHCP (Dynamic Host Configuration Protocol) This mechanism automatically performs network configurations, such as IP addressing for network devices, including DBP-A100, PCs, and broadband routers.

Dolby Digital (5.1-ch Surround) This is a stereophonic effect developed by Dolby Laboratories. This is a maximum of 5.1 channels, independent multi-channel audio system. Dolby Digital Plus This is an extended version of Dolby Digital and is a high sound quality, digital audio technology adopted as an optional audio for Blu- ray discs. Dolby TrueHD This lossless coding technology is adopted as an optional audio for Blu-ray disc and supports 7.1 channels. Downmix This function converts the number of channels of surround audio to less channels for playback. DTS This is an abbreviation of Digital Theater System, which is a digital audio system developed by DTS. When playing audio on this system while connected to a device such as a DTS amplifier, accurate sound field position and realistic sound effects can be obtained, making you feel like you are in a movie theater. DTS-HD This audio technology provides an enhanced functionality and a higher quality of sound than conventional DTS and is adopted as an optional audio for Blu-ray disc. This technology supports multi- channel, high data transfer speed, high sampling-frequency, and lossless audio playback. A maximum of 7.1 channels are supported on Blu-ray discs. Dynamic range The difference between the maximum, undistorted sound level and the minimum sound level that is discernible above the noise emitted by the device.

F Finalizing This process enables BD/DVD/CD discs recorded with a recorder to be played by other players.

H HDCP When transmitting digital signals between devices, this copyright protection technology encrypts the signals to prevent content from being copied without authorization. HDMI This is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. Video signal and audio signal can be connected with 1 cable.

I Interlacing (interlaced scanning) This conventional method used to project images on a TV displays 1 frame of image in half and half, respectively as 2 fields. Interactive audio This is audio recorded in the titles of BD-Videos, such as clicking sounds made during operations.

L LFE This is an abbreviation of Low Frequency Effect, which is an output channel that emphasizes low-frequency effect sounds. Surround audio is intensified by outputting 20Hz to 120Hz deep bass. Linear PCM This is an uncompressed PCM (Pulse Code Modulation) signal. This is the same system as the CD audio but uses 192kHz, 96kHz, and 48kHz sampling frequencies on BD or DVD and provides higher sound quality than CDs.

M MPEG This is an abbreviation of Moving Picture Experts Group, which is an international standard of the moving picture audio compression method. Images on BDs and DVDs are recorded using this method.

P Picture-in-picture This BD-Video function allows you to view scenes, such as the making of or commentary on the movie, in the secondary video while viewing the main story in the primary video. Popup menu This type of menu is recorded with BD software. While playing back a BD, this menu can be displayed on the front of the screen and can be operated. Primary audio This audio signal is recorded in the main story in BD-Video. Progressive (sequential scanning) This is a system for scanning the video signal that displays 1 frame of video as one image. Compared to the interlace system, this system provides images with less flickering and bleeding.

R Rating Depending on the age of the viewer, this function restricts the playing of BD-Videos or DVD-Videos. DBP-A100 can be set to restrict viewing in 0 to 254 levels for BD-Videos, and 1 to 8 levels for DVD-Videos. Region code This code indicates the country or region where the BD or DVD-Video can be played back.

S Secondary audio This is audio content, such as the director's comments, and other data recorded in the bonus view of BD-Video.

T Title This is the unit of content that consists of chapters of BD or DVD -Videos. Some BDs or DVD-Videos may include multiple titles.

Explanation of Terms

Inform ation

1.DBP-A100_E3_ENG_007.indd 53 2010/08/12 19:20:32

ENGLISH

54

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

Index

Inform ation

vA page Adjusting the Picture Quality 33 Advanced AL24 Processing 48 Analog 7.1ch Connection 16 Analog Audio Connection 18 Audio Format 14, 16 Audio Mode 32 Audio Setup 25 Auto Power Mode 31

vB page BD 3, 53 BD-Video 3, 5 BD-LIVE 36, 53 Bonus View 36, 53 Brightness of the Display 47

vC page Cables Used for Connections 12 CD 3, 5 CD-R/-RW 3, 5 Channel Level 23, 25 Chapter 5, 51 Component Resolution 24 Component Video Output 18 Country Code 52

vD page Deep Color 23, 53 DENON LINK 17, 28, 50 Digital Audio Connection 19 Digital Audio Output 27 DivX 4,5 Dolby Digital 14, 16, 51 Dolby Digital Plus 14, 16, 51 Dolby TrueHD 14, 16, 51 Downmix 27, 51 DTS 14, 16, 51 DTS-HD 14, 16, 51 DVD-Audio 3, 5 DVD-R/-RW/+R/+RW 3, 5 DVD-Video 3, 5 DVI-D Terminal 13 Dynamic Range 27, 51

vF page File 4, 5 File Browser Screen 39 Finalizing 4, 53 Firmware Update 31 Folder 5

vG page Group 5

vH page HDCP15, 53 HD Layer 5 HDMI 12, 13, 53 HDMI Connection 13 HDMI Control Function 47 HDMI Setup 23 Home Theater Playback 11

vI page Information Bar Display 34 Interlacing 51

vJ page Jitter-free Connection 17 JPEG4

vL page Language Code 51 Language Setup 23 Letter Box 24, 53 LFE 26, 53 Linear PCM(LPCM) 14, 16, 53 LPCM 14, 16, 53

vM page Maintenance Mode 31 Marker Function 43 Menu Map 21 MP3 4, 14, 16 Multi linear PCM 14

vN page Network 19, 29

vP page Pan Scan 24, 53 Picture-in-Picture 36, 53 Playback(BD) 36 Playback(CD) 37 Playback(DVD) 36 Playback(DVD-Audio) 37 Playback(JPEG) 39 Playback(Super Audio CD) 37 Power Saving 31 Primary Audio 53 Progressive 24, 53 Pure Direct 28, 38

vR page Rating 29, 53 Region Code 3, 53 Remote Control Setting 31 Remote Control 7 Repeat Mode 44 Resume Function 41

vS page Screen Saver 30 SD Memory Card 4, 5 Search Mode42 Secondary Audio 53 Setting HDMI Audio Output 14 Setting HDMI Video Output 13 Source Direct 27 Speaker Configuration 23, 25 Subtitle 46 Super Audio CD 3, 5

vT page Time Display 35 Title 5, 53 Track 5 TV Aspect 24, 53

vV page Vertical Stretch 32 Video Setup 24

vW page Web control 47 WMA 4

1.DBP-A100_E3_ENG_007.indd 54 2010/08/12 19:20:32

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

ENGLISH

55

If a problem occurs, firstly check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owners manual? 3. Are other components operating properly? If this unit does not operate properly, check the items listed in the table below. If the problem continues there may be a malfunction. In this case, disconnect the power immediately and contact your retail outlet.

Troubleshooting

Symptom Cause / Countermeasure Page

Power does not turn on.

Check if the power cord is properly connected. Plug the power supply cord into the power outlet. The safety protection device may be activated. Unplug the power

cord once, and wait for 5-10 seconds and then plug it in again. The safety function puts the DBP-A100 into the standby status

when the fan stops. Check the back of the set to see if something is keeping the fan from rotating.

20

3, 9

Unable to play back BD-LIVE / bonus view.

Does the SD Memory Card have more than 1GB of available space?

Has the SD Memory Card been initialized by the DBP-A100? Was the SD Memory Card inserted while the power of the unit

was on. (Insert the SD Memory Card while the DBP-A100 is in the standby status.)

Remove the write protection of the SD Memory Card.

4, 36

31 4, 36

No picture appears. Switch the TV's input setting to the external input connected to the player.

Is the Pure Direct function set to On? Set it to Off. Also, is Pure Direct Setup Video Out on the GUI menu set to Off at the User Preset 1 or User Preset 2 setting? Set it to On.

Is the HDMI mode set to HDMI On? In this case, video signals are output from the video, S-Video and HDMI terminals, but not from the component terminals.

Check the connection of the video/S-Video/component video cable.

Is the GUI menu HDMI Setup I/P Direct set to On? If so, no video signals are output from the video and S-Video terminals during playback of certain discs.

Does the Video Setup Component Resolution setting on the GUI menu match the connected device's resolution? Set it so that it matches.

28, 38

13

18

23

24

Symptom Cause / Countermeasure Page

Video and audio are not output via the HDMI connection.

Check the connection of the HDMI cable. Is the HDMI indicator on the display of the DBP-A100 lit? Is the Pure Direct function set to On? Set it to Off.

Also, is Pure Direct Setup Video Out on the GUI menu set to Off at the User Preset 1 or User Preset 2 setting? Set it to On.

Is the HDMI mode set to HDMI Off? If so, video signals are output from the video and S-Video terminals, but not from the HDMI terminal.

Check whether the connected display device or other device supports HDCP. This unit will not output a video signal unless the other device supports HDCP. See the owners manual of your TV, AV Amp, etc.

Check that the setting of the HDMI video resolution supports the resolution of the connected device. When set to Auto, DBP- A100 makes the setting automatically.

13 8

28, 38

13

15

13

HD audio is not output.

Set BD Audio Mode to HD Audio Output. 32

The picture is not displayed or is disrupted. The picture of a BD- Video or DVD-Video disc is in black and white.

The picture may be slightly disturbed right after fast-forwarding or reversing. This is not a malfunction.

Connect the DBP-A100s video/S-Video/component video output either directly to the TV or to the TV via the AV Amp. Do not connect via a VCR, (video cassette recorder). Some discs include copy prohibit signals, and when such discs are played via a VCR the copy guard system may disrupt the picture.

Is a disc that is not compatible with the player or a disc with a different region number loaded? (This player supports region code A for BD-Video discs, 1 or ALL for DVD-Video discs.)

Is the GUI menu HDMI Setup I/P Direct set to On? If so, no video signals are output from the video and S-Video terminals during playback of certain discs.

18

3

23

Troubleshooting

1.DBP-A100_E3_ENG_007.indd 55 2010/08/12 19:20:32

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

ENGLISH

56

Some functions may not be used under certain operating conditions, but this is not failure of the unit. Read the description in this Owners Manual for details on correct operations.

The volume may differ from disc to disc. This is due to the differences in how the signals are recorded on the disc and is not a malfunction.

During programmed playback, it is not possible to perform random playback or to start playback from a desired track or file.

Some functions are prohibited on some discs.

Symptom Cause / Countermeasure Page

The unit is operated by the remote control of an other DENON product.

The unit is designed to be operated by the remote controls of other DENON products.

To avoid the unit being operated by the remote controls of other devices, set Other Setup Remote Control Setting Receive Legacy Remocon to Off on the GUI menu.

7, 31

31

Buttons do not work or the unit stops responding.

Operations may not be permitted by the disc. The safety protection device may be activated. Unplug the power

cord once, and wait for 5-10 seconds and then plug it in again. Refer to the instructions of the disc.

A playable disc is not read.

The pickup lens may be dirty. Before requesting servicing, try cleaning the laser pickup with a commercially available lens cleaner. (Do not use a cleaner with a brush because it may damage the lens.)

The camera angle does not switch.

If the multiple angles are not recorded in a BD-Video or DVD- Video, the camera angle cannot be switched. Also, multiple angles may only be recorded for specific scenes.

47

Playback does not start when a title is selected.

Playback may be prohibited by the viewing restriction setting. Check the Ratings setting on the GUI menu.

29

I have forgotten the password for the rating level.

On the GUI menu, perform the Other Setup Initialize procedure.

31

Troubleshooting

Symptom Cause / Countermeasure Page

No sound or the sound is hard to hear.

Check the audio connections of connected devices and speakers.

Is the power connected audio devices turned on? Is the input selection set to the input to which the DBP-A100 is connected?

Is the audio output properly selected?

11 ~ 20

13 ~ 20

The picture freezes momentarily during playback.

If a disc is scratched or contaminated with fingerprints, the disc may not play correctly. Clean the disc or replace with a non- scratched disc.

There may be a problem with the data recorded on the disc.

6

Playback does not start even when 1 is pressed, or starts but stops immediately.

Is there condensation inside the player or on the disc? (Let it sit for 1 to 2 hours with the power off.)

When the disc is scratched or contaminated with fingerprints, the disc may not play correctly. Clean the disc or replace with a non-scratched disc.

Is the disc loaded upside-down? Load the disc properly, with the side to be played face down.

Is an unplayable disc loaded?

3

6

6

3, 4

Subtitles are not displayed.

Subtitles cannot be displayed for BD-Video, DVD-Video or DivX files that do not contain subtitles.

Is the subtitle setting Off? Use the disc menu or to set the subtitles to display.

46

23

My SD Memory Card cannot be read.

The format of the card does not match this unit or the card is not compatible.

Is the playback media mode set to SD CARD MODE? Select SD CARD MODE with .

31

34

No return to start-up screen when a disc is removed.

There may be an internal error. Set the power to standby, wait awhile, then turn the power back on.

The set cannot be operated with the remote control.

Aim the remote control directly at the infrared sensor window on the front of the unit.

Operate within a distance of 7 meters from the remote control sensor.

Remove any obstacles. Replace the batteries with new ones. Insert the batteries in the proper direction, checking the q and w marks.

Match the signal code of the remote control to the signal code of the unit.

7

7

7 7

7

1.DBP-A100_E3_ENG_007.indd 56 2010/08/12 19:20:32

Troubleshooting Inform

ation H

D M

I C ontrol Function

Playback S

etup C

onnections G

etting S tarted

S pecifications

ENGLISH

57

Specifications n Audio performance Signal format : NTSC Applicable discs /memory cards : (1) BD-Video discs :

12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers (2) DVD-Video / DVD-Audio discs :

12 cm, 1 side, 1 layer; 12 cm, 1 side, 2 layers / 12 cm, 2 sides, 2 layers (1 side, 1 layer) 8 cm, 1 side, 1 layer; 8 cm, 1 side, 2 layers / 8 cm, 2 sides, 2 layers (1 side, 1 layer)

(3) Super Audio CDs : 12 cm, 1 layer / 12 cm, 2 layer / 12 cm, Hybrid

(4) Compact Discs (CD-DA) : 12 cm, / 8 cm, discs

(5) Memory cards : SD Memory Card / SDHC Memory Card / miniSD Card / microSD Card

S-Video output : Y output level : 1Vp-p (75 ) C output level : 0.286 Vp-p Output terminal : S-Video, 1 set

Video output : Output level : 1Vp-p (75 ) Output terminal : Pin-jack, 1 set

Component video output : Y output level : 1Vp-p (75 ) Pb/Cb output level / Pr/Cr output level : 0.648 Vp-p (75 ) Output terminal : Pin-jack, 1 set

HDMI output : Output terminal : 19-pin HDMI terminals, 1 set HDMI ver. 1.3a (Deep Colour, Dolby Digital Plus, Dolby TrueHD, DTS-HD)

Analog audio output : Output level : 2 Vrms (10 k) 2 channels output terminal : Pin-jack, 1 set 7.1 channels output terminal : Pin-jack, 1 set

Audio output characteristics : (1) Frequency response q BD (Multi linear PCM)

w DVD (Multi linear PCM)

e Super Audio CD r CD

: 2Hz ~ 22kHz (48kHz sampling) : 2Hz ~ 44kHz (96kHz sampling) : 2Hz ~ 88kHz (192kHz sampling) : 2Hz ~ 22kHz (48kHz sampling) : 2Hz ~ 44kHz (96kHz sampling) : 2Hz ~ 88kHz (192kHz sampling) : 2Hz ~ 100kHz : 2Hz ~ 20kHz

(2) S/N ratio : 125dB (3) Total harmonic distortion : 1kHz 0.0008% (4) Dynamic range : 110dB

Digital audio output : Optical digital output: Optical connector, 1 set Coaxial digital output: Pin jack, 1 set

n General Power supply : AC 120 V, 60 Hz Power consumption : (vpage 31 Power Saving)

55 W When in Power Saving Standby : 0.3 W When in Normal Standby : 0.8 W When in Quick Start Mode :

20 ~ 35 W (Changes according to connection status, etc.) Maximum external dimensions : 434 (W) x 137 (H) x 383 (D) mm (17-3/32 x 5-25/64 x 15-5/64) Weight : 11.3 kg (24 lbs)

n Remote control unit (RC-1140) Remote control type : Infrared pulse Batteries : R6/AA Type (two batteries) Maximum external dimensions : 58 (W) x 230 (H) x 37 (D) mm (2-9/32 x 9-1/16 x 1-29/64) Weight : 205 g (Approx. 7.2 oz) (included batteries)

z For purposes of improvement, specifications and design are subject to change without notice.

S pecifications

1.DBP-A100_E3_ENG_007.indd 57 2010/08/12 19:20:32

LICENSE1

This section describes software license used for DBP-A100. To maintain the correct content, the original (English) is used.

n Exhibit-A GNU GENERAL PUBLIC LICENSE

Version 2, June 1991 Copyright (C) 1989, 1991 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundations software and to any other program whose authors commit to using it. (Some other Free Software Foundation software is covered by the GNU Library General Public License instead.) You can apply it to your programs, too. When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish), that you receive source code or can get it if you want it, that you can change the software or use pieces of it in new free programs; and that you know you can do these things. To protect your rights, we need to make restrictions that forbid anyone to deny you these rights or to ask you to surrender the rights. These restrictions translate to certain responsibilities for you if you distribute copies of the software, or if you modify it. For example, if you distribute copies of such a program, whether gratis or for a fee, you must give the recipients all the rights that you have. You must make sure that they, too, receive or can get the source code. And you must show them these terms so they know their rights. We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each authors protection and ours, we want to make certain that everyone understands that there is no warranty for this free software. If the software is modified by someone else and passed on, we want its recipients to know that what they have is not the original, so that any problems introduced by others will not reflect on the original authors reputations. Finally, any free program is threatened constantly by software patents. We wish to avoid the danger that redistributors of a free program will individually obtain patent licenses, in effect making the program proprietary. To prevent this, we have made it clear that any patent must be licensed for everyones free use or not licensed at all. The precise terms and conditions for copying, distribution and modification follow.

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License applies to any program or other work

which contains a notice placed by the copyright holder saying it may be distributed under the terms of this General Public License. The Program, below, refers to any such program or work, and a work based on the Program means either the Program or any derivative work under copyright law: that is to say, a work containing the Program or a portion of it, either verbatim or with modifications and/or translated into another language. (Hereinafter, translation is included without limitation in the term modification.) Each licensee is addressed as you. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does.

1. You may copy and distribute verbatim copies of the Programs source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Program or any portion of it, thus forming a work based on the Program, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) You must cause the modified files to carry prominent

notices stating that you changed the files and the date of any change.

b) You must cause any work that you distribute or publish, that in whole or in part contains or is derived from the Program or any part thereof, to be licensed as a whole at no charge to all third parties under the terms of this License.

c) If the modified program normally reads commands interactively when run, you must cause it, when started running for such interactive use in the most ordinary way, to print or display an announcement including an appropriate copyright notice and a notice that there is no warranty (or else, saying that you provide a warranty) and that users may redistribute the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Program, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Program, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work not based on the Program with the Program (or with a work based on the Program) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may copy and distribute the Program (or a work based on it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you also do one of the following: a) Accompany it with the complete corresponding

machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or,

c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial distribution and only if you received the program in object code or executable form with such an offer, in accord with Subsection b above.)

The source code for a work means the preferred form of the work for making modifications to it. For an executable work, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the executable. However, as a special exception, the source code distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of executable or object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place counts as distribution of the source code, even though third parties are not compelled to copy the source along with the object code.

License 4. You may not copy, modify, sublicense, or distribute

the Program except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense or distribute the Program is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

5. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Program or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it.

6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties to this License.

7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Program. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system, which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

4.DBP-A100_Backpage_007.indd 1 2010/08/12 19:38:20

LICENSE 2

8. If the distribution and/or use of the Program is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Program under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

9. The Free Software Foundation may publish revised and/or new versions of the General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Program specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Program does not specify a version number of this License, you may choose any version ever published by the Free Software Foundation.

10. If you wish to incorporate parts of the Program into other free programs whose distribution conditions are different, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE

OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Programs If you develop a new program, and you want it to be of the greatest possible use to the public, the best way to achieve this is to make it free software which everyone can redistribute and change under these terms. To do so, attach the following notices to the program. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.

Copyright (C) This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA

Also add information on how to contact you by electronic and paper mail. If the program is interactive, make it output a short notice like this when it starts in an interactive mode:

Gnomovision version 69, Copyright (C) year name of author Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type show w. This is free software, and you are welcome to redistribute it under certain conditions; type show c for details.

The hypothetical commands show w and show c should show the appropriate parts of the General Public License. Of course, the commands you use may be called something other than show w and show c; they could even be mouse-clicks or menu items--whatever suits your program. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the program, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the program Gnomovision (which makes passes at compilers) written by James Hacker. , 1 April 1989 Ty Coon, President of Vice

This General Public License does not permit incorporating your program into proprietary programs. If your program is a subroutine library, you may consider it more useful to permit linking proprietary applications with the library. If this is what you want to do, use the GNU Library General Public License instead of this License.

n Exhibit-B GNU LESSER GENERAL PUBLIC LICENSE

Version 2.1, February 1999 Copyright (C) 1991, 1999 Free Software Foundation, Inc. 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. [This is the first released version of the Lesser GPL. It also counts as the successor of the GNU Library Public License, version 2, hence the version number 2.1.] Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public Licenses are intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This license, the Lesser General Public License, applies to some specially designated software packages-- typically libraries--of the Free Software Foundation and other authors who decide to use it. You can use it too, but we suggest you first think carefully about whether this license or the ordinary General Public License is the better strategy to use in any particular case, based on the explanations below. When we speak of free software, we are referring to freedom of use, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charge for this service if you wish); that you receive source code or can get it if you want it; that you can change the software and use pieces of it in new free programs; and that you are informed that you can do these things. To protect your rights, we need to make restrictions that forbid distributors to deny you these rights or to ask you to surrender these rights. These restrictions translate to certain responsibilities for you if you distribute copies of the library or if you modify it. For example, if you distribute copies of the library, whether gratis or for a fee, you must give the recipients all the rights that we gave you. You must make sure that they, too, receive or can get the source code. If you link other code with the library, you must provide complete object files to the recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights. We protect your rights with a two- step method: (1) we copyright the library, and (2) we offer you this license, which gives you legal permission to copy, distribute and/or modify the library. To protect each distributor, we want to make it very clear that there is no warranty for the free library. Also, if the library is modified by someone else and passed on, the recipients should know that what they have is not the original version, so that the original authors reputation will not be affected by problems that might be introduced by others.

Finally, software patents pose a constant threat to the existence of any free program. We wish to make sure that a company cannot effectively restrict the users of a free program by obtaining a restrictive license from a patent holder. Therefore, we insist that any patent license obtained for a version of the library must be consistent with the full freedom of use specified in this license. Most GNU software, including some libraries, is covered by the ordinary GNU General Public License. This license, the GNU Lesser General Public License, applies to certain designated libraries, and is quite different from the ordinary General Public License. We use this license for certain libraries in order to permit linking those libraries into non-free programs. When a program is linked with a library, whether statically or using a shared library, the combination of the two is legally speaking a combined work, a derivative of the original library. The ordinary General Public License therefore permits such linking only if the entire combination fits its criteria of freedom. The Lesser General Public License permits more lax criteria for linking other code with the library. We call this license the Lesser General Public License because it does Less to protect the users freedom than the ordinary General Public License. It also provides other free software developers Less of an advantage over competing non-free programs. These disadvantages are the reason we use the ordinary General Public License for many libraries. However, the Lesser license provides advantages in certain special circumstances. For example, on rare occasions, there may be a special need to encourage the widest possible use of a certain library, so that it becomes a de-facto standard. To achieve this, non-free programs must be allowed to use the library. A more frequent case is that a free library does the same job as widely used non-free libraries. In this case, there is little to gain by limiting the free library to free software only, so we use the Lesser General Public License. In other cases, permission to use a particular library in non- free programs enables a greater number of people to use a large body of free software. For example, permission to use the GNU C Library in non-free programs enables many more people to use the whole GNU operating system, as well as its variant, the GNU/Linux operating system. Although the Lesser General Public License is Less protective of the users freedom, it does ensure that the user of a program that is linked with the Library has the freedom and the wherewithal to run that program using a modified version of the Library. The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a work based on the library and a work that uses the library. The former contains code derived from the library, whereas the latter must be combined with the library in order to run.

4.DBP-A100_Backpage_007.indd 2 2010/08/12 19:38:20

LICENSE3

TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION 0. This License Agreement applies to any software library

or other program which contains a notice placed by the copyright holder or other authorized party saying it may be distributed under the terms of this Lesser General Public License (also called this License). Each licensee is addressed as you. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. The Library, below, refers to any such software library or work which has been distributed under these terms. A work based on the Library means either the Library or any derivative work under copyright law: that is to say, a work containing the Library or a portion of it, either verbatim or with modifications and/ or translated straightforwardly into another language. (Hereinafter, translation is included without limitation in the term modification.) Source code for a work means the preferred form of the work for making modifications to it. For a library, complete source code means all the source code for all modules it contains, plus any associated interface definition files, plus the scripts used to control compilation and installation of the library. Activities other than copying, distribution and modification are not covered by this License; they are outside its scope. The act of running a program using the Library is not restricted, and output from such a program is covered only if its contents constitute a work based on the Library (independent of the use of the Library in a tool for writing it). Whether that is true depends on what the Library does and what the program that uses the Library does.

1. You may copy and distribute verbatim copies of the Librarys complete source code as you receive it, in any medium, provided that you conspicuously and appropriately publish on each copy an appropriate copyright notice and disclaimer of warranty; keep intact all the notices that refer to this License and to the absence of any warranty; and distribute a copy of this License along with the Library. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.

2. You may modify your copy or copies of the Library or any portion of it, thus forming a work based on the Library, and copy and distribute such modifications or work under the terms of Section 1 above, provided that you also meet all of these conditions: a) The modified work must itself be a software library. b) You must cause the files modified to carry prominent

notices stating that you changed the files and the date of any change.

c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility, other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensure that,

in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful.

(For example, a function in a library to compute square roots has a purpose that is entirely well- defined independent of the application. Therefore, Subsection 2d requires that any application-supplied function or table used by this function must be optional: if the application does not supply it, the square root function must still compute square roots.)

These requirements apply to the modified work as a whole. If identifiable sections of that work are not derived from the Library, and can be reasonably considered independent and separate works in themselves, then this License, and its terms, do not apply to those sections when you distribute them as separate works. But when you distribute the same sections as part of a whole which is a work based on the Library, the distribution of the whole must be on the terms of this License, whose permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Library. In addition, mere aggregation of another work not based on the Library with the Library (or with a work based on the Library) on a volume of a storage or distribution medium does not bring the other work under the scope of this License.

3. You may opt to apply the terms of the ordinary GNU General Public License instead of this License to a given copy of the Library. To do this, you must alter all the notices that refer to this License, so that they refer to the ordinary GNU General Public License, version 2, instead of to this License. (If a newer version than version 2 of the ordinary GNU General Public License has appeared, then you can specify that version instead if you wish.) Do not make any other change in these notices. Once this change is made in a given copy, it is irreversible for that copy, so the ordinary GNU General Public License applies to all subsequent copies and derivative works made from that copy. This option is useful when you wish to copy part of the code of the Library into a program that is not a library.

4. You may copy and distribute the Library (or a portion or derivative of it, under Section 2) in object code or executable form under the terms of Sections 1 and 2 above provided that you accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange. If distribution of object code is made by offering access to copy from a designated place, then offering equivalent access to copy the source code from the same place satisfies the requirement to distribute the source code, even though third parties are not compelled to copy the source along with the object code.

5. A program that contains no derivative of any portion of the Library, but is designed to work with the Library by being compiled or linked with it, is called a work that uses the Library. Such a work, in isolation, is not a derivative work of the Library, and therefore falls outside the scope of this License. However, linking a work that uses the Library with the Library creates an executable that is a derivative of the Library (because it contains portions of the Library), rather than a work that uses the library. The executable is therefore covered by this License. Section 6 states terms for distribution of such executables. When a work that uses the Library uses material from a header file that is part of the Library, the object code for the work may be a derivative work of the Library even though the source code is not. Whether this is true is especially significant if the work can be linked without the Library, or if the work is itself a library. The threshold for this to be true is not precisely defined by law. If such an object file uses only numerical parameters, data structure layouts and accessors, and small macros and small inline functions (ten lines or less in length), then the use of the object file is unrestricted, regardless of whether it is legally a derivative work. (Executables containing this object code plus portions of the Library will still fall under Section 6.) Otherwise, if the work is a derivative of the Library, you may distribute the object code for the work under the terms of Section 6. Any executables containing that work also fall under Section 6, whether or not they are linked directly with the Library itself.

6. As an exception to the Sections above, you may also combine or link a work that uses the Library with the Library to produce a work containing portions of the Library, and distribute that work under terms of your choice, provided that the terms permit modification of the work for the customers own use and reverse engineering for debugging such modifications. You must give prominent notice with each copy of the work that the Library is used in it and that the Library and its use are covered by this License. You must supply a copy of this License. If the work during execution displays copyright notices, you must include the copyright notice for the Library among them, as well as a reference directing the user to the copy of this License. Also, you must do one of these things: a) Accompany the work with the complete

corresponding machine-readable source code for the Library including whatever changes were used in the work (which must be distributed under Sections 1 and 2 above); and, if the work is an executable linked with the Library, with the complete machine-readable work that uses the Library, as object code and/or source code, so that the user can modify the Library and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.)

b) Use a suitable shared library mechanism for linking with the Library. A suitable mechanism is one that (1) uses at run time a copy of the library already present on the users computer system, rather than copying library functions into the executable, and (2) will operate properly with a modified version of the library, if the user installs one, as long as the modified version is interface-compatible with the version that the work was made with.

c) Accompany the work with a written offer, valid for at least three years, to give the same user the materials specified in Subsection 6a, above, for a charge no more than the cost of performing this distribution.

d) If distribution of the work is made by offering access to copy from a designated place, offer equivalent access to copy the above specified materials from the same place.

e) Verify that the user has already received a copy of these materials or that you have already sent this user a copy.

For an executable, the required form of the work that uses the Library must include any data and utility programs needed for reproducing the executable from it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the major components (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a contradiction means you cannot use both them and the Library together in an executable that you distribute.

7. You may place library facilities that are a work based on the Library side-by-side in a single library together with other library facilities not covered by this License, and distribute such a combined library, provided that the separate distribution of the work based on the Library and of the other library facilities is otherwise permitted, and provided that you do these two things: a) Accompany the combined library with a copy of the

same work based on the Library, uncombined with any other library facilities. This must be distributed under the terms of the Sections above.

b) Give prominent notice with the combined library of the fact that part of it is a work based on the Library, and explaining where to find the accompanying uncombined form of the same work.

8. You may not copy, modify, sublicense, link with, or distribute the Library except as expressly provided under this License. Any attempt otherwise to copy, modify, sublicense, link with, or distribute the Library is void, and will automatically terminate your rights under this License. However, parties who have received copies, or rights, from you under this License will not have their licenses terminated so long as such parties remain in full compliance.

4.DBP-A100_Backpage_007.indd 3 2010/08/12 19:38:20

LICENSE 4

9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License. Therefore, by modifying or distributing the Library (or any work based on the Library), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Library or works based on it.

10. Each time you redistribute the Library (or any work based on the Library), the recipient automatically receives a license from the original licensor to copy, distribute, link with or modify the Library subject to these terms and conditions. You may not impose any further restrictions on the recipients exercise of the rights granted herein. You are not responsible for enforcing compliance by third parties with this License.

11. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License. If you cannot distribute so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty-free redistribution of the Library by all those who receive copies directly or indirectly through you, then the only way you could satisfy both it and this License would be to refrain entirely from distribution of the Library. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the sole purpose of protecting the integrity of the free software distribution system which is implemented by public license practices. Many people have made generous contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License.

12. If the distribution and/or use of the Library is restricted in certain countries either by patents or by copyrighted interfaces, the original copyright holder who places the Library under this License may add an explicit geographical distribution limitation excluding those countries, so that distribution is permitted only in or among countries not thus excluded. In such case, this License incorporates the limitation as if written in the body of this License.

13. The Free Software Foundation may publish revised and/or new versions of the Lesser General Public License from time to time. Such new versions will be similar in spirit to the present version, but may differ in detail to address new problems or concerns. Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and any later version, you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation. If the Library does not specify a license version number, you may choose any version ever published by the Free Software Foundation.

14. If you wish to incorporate parts of the Library into other free programs whose distribution conditions are incompatible with these, write to the author to ask for permission. For software which is copyrighted by the Free Software Foundation, write to the Free Software Foundation; we sometimes make exceptions for this. Our decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

NO WARRANTY 15. BECAUSE THE LIBRARY IS LICENSED FREE OF

CHARGE, THERE IS NO WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE LIBRARY AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION.

16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

END OF TERMS AND CONDITIONS How to Apply These Terms to Your New Libraries If you develop a new library, and you want it to be of the greatest possible use to the public, we recommend making it free software that everyone can redistribute and change. You can do so by permitting redistribution under these terms (or, alternatively, under the terms of the ordinary General Public License). To apply these terms, attach the following notices to the library. It is safest to attach them to the start of each source file to most effectively convey the exclusion of warranty; and each file should have at least the copyright line and a pointer to where the full notice is found.

Copyright (C)

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version. This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details. You should have received a copy of the GNU Lesser General Public License along with this library; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Also add information on how to contact you by electronic and paper mail. You should also get your employer (if you work as a programmer) or your school, if any, to sign a copyright disclaimer for the library, if necessary. Here is a sample; alter the names:

Yoyodyne, Inc., hereby disclaims all copyright interest in the library Frob (a library for tweaking knobs) written by James Random Hacker. , 1 April 1990 Ty Coon, President of Vice

Thats all there is to it!

n Exhibit-C Copyright notice: (C) 1995-2004 Jean-loup Gailly and Mark Adler

This software is provided as-is, without any express or implied warranty. In no event will the authors be held liable for any damages arising from the use of this software. Permission is granted to anyone to use this software for any purpose, including commercial applications, and to alter it and redistribute it freely, subject to the following restrictions: 1. The origin of this software must not be misrepresented;

you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution. Jean-loup Gailly Mark Adler jloup@gzip.org madler@alumni.caltech.edu

If you use the zlib library in a product, we would appreciate *not* receiving lengthy legal documents to sign. The sources are provided for free but without warranty of any kind. The library has been entirely written by Jean- loup Gailly and Mark Adler; it does not include third-party code. If you redistribute modified sources, we would appreciate that you include in the file ChangeLog history information documenting your changes. Please read the FAQ for more information on the distribution of modified source versions.

n Exhibit-D Copyright (c) 1998, 1999, 2000 Thai Open Source Software Center Ltd and Clark Cooper Copyright (c) 2001, 2002 Expat maintainers.

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

n Exhibit-E The Independent JPEG Groups JPEG software README for release 6b of 27-Mar-1998

This distribution contains the sixth public release of the Independent JPEG Groups free JPEG software. You are welcome to redistribute this software and to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. Serious users of this software (particularly those incorporating it into larger programs) should contact IJG at jpeg-info@uunet.uu.net to be added to our electronic mailing list. Mailing list members are notified of updates and have a chance to participate in technical discussions, etc. This software is the work of Tom Lane, Philip Gladstone, Jim Boucher, Lee Crocker, Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Guido Vollbeding, Ge Weijers, and other members of the Independent JPEG Group. IJG is not affiliated with the official ISO JPEG standards committee. DOCUMENTATION ROADMAP This file contains the following sections: OVERVIEW General description of JPEG and

the IJG software. LEGAL ISSUES Copyright, lack of warranty,

terms of distribution. REFERENCES Where to learn more about

JPEG. ARCHIVE LOCATIONS Where to find newer versions of

this software. RELATED SOFTWARE Other stuff you should get. FILE FORMAT WARS Software *not* to get. TO DO Plans for future IJG releases. Other documentation files in the distribution are: User documentation:

4.DBP-A100_Backpage_007.indd 4 2010/08/12 19:38:20

LICENSE5

install.doc How to configure and install the IJG software.

usage.doc Usage instructions for cjpeg, djpeg, jpegtran, rdjpgcom, and wrjpgcom.

*.1 Unix-style man pages for programs (same info as usage. doc).

wizard.doc Advanced usage instructions for JPEG wizards only.

change.log Version-to-version change highlights.

Programmer and internal documentation: libjpeg.doc How to use the JPEG library in

your own programs. example.c Sample code for calling the

JPEG library. structure.doc Overview of the JPEG librarys

internal structure. filelist.doc Road map of IJG files. coderules.doc Coding style rules --- please read

if you contribute code. Please read at least the files install.doc and usage.doc. Useful information can also be found in the JPEG FAQ (Frequently Asked Questions) article. See ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. If you want to understand how the JPEG code works, we suggest reading one or more of the REFERENCES, then looking at the documentation files (in roughly the order listed) before diving into the code. OVERVIEW This package contains C software to implement JPEG image compression and decompression. JPEG (pronounced jay- peg) is a standardized compression method for full-color and gray-scale images. JPEG is intended for compressing real-world scenes; line drawings, cartoons and other non-realistic images are not its strong suit. JPEG is lossy, meaning that the output image is not exactly identical to the input image. Hence you must not use JPEG if you have to have identical output bits. However, on typical photographic images, very good compression levels can be obtained with no visible change, and remarkably high compression levels are possible if you can tolerate a low- quality image. For more details, see the references, or just experiment with various compression settings. This software implements JPEG baseline, extended- sequential, and progressive compression processes. Provision is made for supporting all variants of these processes, although some uncommon parameter settings arent implemented yet. For legal reasons, we are not distributing code for the arithmetic-coding variants of JPEG; see LEGAL ISSUES. We have made no provision for supporting the hierarchical or lossless processes defined in the standard. We provide a set of library routines for reading and writing JPEG image files, plus two sample applications cjpeg and djpeg, which use the library to perform conversion between JPEG and some other popular image file formats.

The library is intended to be reused in other applications. In order to support file conversion and viewing software, we have included considerable functionality beyond the bare JPEG coding/decoding capability; for example, the color quantization modules are not strictly part of JPEG decoding, but they are essential for output to colormapped file formats or colormapped displays. These extra functions can be compiled out of the library if not required for a particular application. We have also included jpegtran, a utility for lossless transcoding between different JPEG processes, and rdjpgcom and wrjpgcom, two simple applications for inserting and extracting textual comments in JFIF files. The emphasis in designing this software has been on achieving portability and flexibility, while also making it fast enough to be useful. In particular, the software is not intended to be read as a tutorial on JPEG. (See the REFERENCES section for introductory material.) Rather, it is intended to be reliable, portable, industrial-strength code. We do not claim to have achieved that goal in every aspect of the software, but we strive for it. We welcome the use of this software as a component of commercial products. No royalty is required, but we do ask for an acknowledgement in product documentation, as described under LEGAL ISSUES. LEGAL ISSUES In plain English: 1. We dont promise that this software works. (But if you

find any bugs, please let us know!) 2. You can use this software for whatever you want. You

dont have to pay us. 3. You may not pretend that you wrote this software.

If you use it in a program, you must acknowledge somewhere in your documentation that youve used the IJG code.

In legalese: The authors make NO WARRANTY or representation, either express or implied, with respect to this software, its quality, accuracy, merchantability, or fitness for a particular purpose. This software is provided AS IS, and you, its user, assume the entire risk as to its quality and accuracy. This software is copyright (C) 1991-1998, Thomas G. Lane. All Rights Reserved except as specified below. Permission is hereby granted to use, copy, modify, and distribute this software (or portions thereof) for any purpose, without fee, subject to these conditions: (1) If any part of the source code for this software is

distributed, then this README file must be included, with this copyright and no-warranty notice unaltered; and any additions, deletions, or changes to the original files must be clearly indicated in accompanying documentation.

(2) If only executable code is distributed, then the accompanying documentation must state that this software is based in part on the work of the Independent JPEG Group.

(3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the authors accept NO LIABILITY for damages of any kind.

These conditions apply to any software derived from or based on the IJG code, not just to the unmodified library. If you use our work, you ought to acknowledge us. Permission is NOT granted for the use of any IJG authors name or company name in advertising or publicity relating to this software or products derived from it. This software may be referred to only as the Independent JPEG Groups software. We specifically permit and encourage the use of this software as the basis of commercial products, provided that all warranty or liability claims are assumed by the product vendor. ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. ansi2knr.c is NOT covered by the above copyright and conditions, but instead by the usual distribution terms of the Free Software Foundation; principally, that you must include source code if you redistribute it. (See the file ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part of any program generated from the IJG code, this does not limit you more than the foregoing paragraphs do. The Unix configuration script configure was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config. guess, config.sub, ltconfig, ltmain.sh). Another support script, install-sh, is copyright by M.I.T. but is also freely distributable. It appears that the arithmetic coding option of the JPEG spec is covered by patents owned by IBM, AT&T, and Mitsubishi. Hence arithmetic coding cannot legally be used without obtaining one or more licenses. For this reason, support for arithmetic coding has been removed from the free JPEG software. (Since arithmetic coding provides only a marginal gain over the unpatented Huffman mode, it is unlikely that very many implementations will support it.) So far as we are aware, there are no patent restrictions on the remaining code. The IJG distribution formerly included code to read and write GIF files. To avoid entanglement with the Unisys LZW patent, GIF reading support has been removed altogether, and the GIF writer has been simplified to produce uncompressed GIFs. This technique does not use the LZW algorithm; the resulting GIF files are larger than usual, but are readable by all standard GIF decoders. We are required to state that

The Graphics Interchange Format(c) is the Copyright property of CompuServe Incorporated. GIF(sm) is a Service Mark property of CompuServe Incorporated.

REFERENCES We highly recommend reading one or more of these references before trying to understand the innards of the JPEG software. The best short technical introduction to the JPEG compression algorithm is

Wallace, Gregory K. The JPEG Still Picture Compression Standard, Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44.

(Adjacent articles in that issue discuss MPEG motion picture compression, applications of JPEG, and related topics.) If you dont have the CACM issue handy, a PostScript file containing a revised version of Wallaces article is available at ftp://ftp.uu.net/graphics/jpeg/ wallace.ps.gz. The file (actually a preprint for an article that appeared in IEEE Trans. Consumer Electronics) omits the sample images that appeared in CACM, but it includes corrections and some added material. Note: the Wallace article is copyright ACM and IEEE, and it may not be used for commercial purposes. A somewhat less technical, more leisurely introduction to JPEG can be found in The Data Compression Book by Mark Nelson and Jean-loup Gailly, published by M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides good explanations and example C code for a multitude of compression methods including JPEG. It is an excellent source if you are comfortable reading C code but dont know much about data compression in general. The books JPEG sample code is far from industrial-strength, but when you are ready to look at a full implementation, youve got one here... The best full description of JPEG is the textbook JPEG Still Image Data Compression Standard by William B. Pennebaker and Joan L. Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG standards (DIS 10918-1 and draft DIS 10918-2). This is by far the most complete exposition of JPEG in existence, and we highly recommend it. The JPEG standard itself is not available electronically; you must order a paper copy through ISO or ITU. (Unless you feel a need to own a certified official copy, we recommend buying the Pennebaker and Mitchell book instead; its much cheaper and includes a great deal of useful explanatory material.) In the USA, copies of the standard may be ordered from ANSI Sales at (212) 642-4900, or from Global Engineering Documents at (800) 854-7179. (ANSI doesnt take credit card orders, but Global does.) Its not cheap: as of 1992, ANSI was charging $95 for Part 1 and $47 for Part 2, plus 7% shipping/handling. The standard is divided into two parts, Part 1 being the actual specification, while Part 2 covers compliance testing methods. Part 1 is titled Digital Compression and Coding of Continuous-tone Still Images, Part 1: Requirements and guidelines and has document numbers ISO/IEC IS 10918-1, ITU-T T.81. Part 2 is titled Digital Compression and Coding of Continuous-tone Still Images, Part 2: Compliance testing and has document numbers ISO/IEC IS 10918-2, ITU-T T.83. Some extensions to the original JPEG standard are defined in JPEG Part 3, a newer ISO standard numbered ISO/IEC IS 10918-3 and ITU-T T.84. IJG currently does not support any Part 3 extensions. The JPEG standard does not specify all details of an interchangeable file format. For the omitted details we follow the JFIF conventions, revision 1.02. A copy of the JFIF spec is available from:

Literature Department C-Cube Microsystems, Inc. 1778 McCarthy Blvd. Milpitas, CA 95035 phone (408) 944-6300, fax (408) 944-6314

4.DBP-A100_Backpage_007.indd 5 2010/08/12 19:38:21

LICENSE 6

A PostScript version of this document is available by FTP at ftp://ftp.uu.net/graphics/jpeg/jfif.ps.gz. There is also a plain text version at ftp://ftp.uu.net/graphics/jpeg/jfif.txt. gz, but it is missing the figures. The TIFF 6.0 file format specification can be obtained by FTP from ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 (Compression tag 7). Copies of this Note can be obtained from ftp.sgi.com or from ftp:// ftp.uu.net/graphics/jpeg/. It is expected that the next revision of the TIFF spec will replace the 6.0 JPEG design with the Notes design. Although IJGs own code does not support TIFF/JPEG, the free libtiff library uses our library to implement TIFF/ JPEG per the Note. libtiff is available from ftp://ftp.sgi. com/graphics/tiff/. ARCHIVE LOCATIONS The official archive site for this software is ftp.uu.net (Internet address 192.48.96.9). The most recent released version can always be found there in directory graphics/ jpeg. This particular version will be archived as ftp://ftp. uu.net/graphics/jpeg/jpegsrc.v6b.tar.gz. If you dont have direct Internet access, UUNETs archives are also available via UUCP; contact help@uunet.uu.net for information on retrieving files that way. Numerous Internet sites maintain copies of the UUNET files. However, only ftp.uu.net is guaranteed to have the latest official version. You can also obtain this software in DOS-compatible zip archive format from the SimTel archives (ftp://ftp.simtel. net/pub/simtelnet/msdos/graphics/), or on CompuServe in the Graphics Support forum (GO CIS:GRAPHSUP), library 12 JPEG Tools. Again, these versions may sometimes lag behind the ftp.uu.net release. The JPEG FAQ (Frequently Asked Questions) article is a useful source of general information about JPEG. It is updated constantly and therefore is not included in this distribution. The FAQ is posted every two weeks to Usenet newsgroups comp.graphics.misc, news.answers, and other groups. It is available on the World Wide Web at http://www.faqs. org/faqs/jpeg-faq/ and other news.answers archive sites, including the official news.answers archive at rtfm.mit. edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg- faq/. If you dont have Web or FTP access, send e-mail to mail- server@rtfm.mit.edu with body

send usenet/news.answers/jpeg-faq/part1 send usenet/news.answers/jpeg-faq/part2

RELATED SOFTWARE Numerous viewing and image manipulation programs now support JPEG. (Quite a few of them use this library to do so.) The JPEG FAQ described above lists some of the more popular free and shareware viewers, and tells where to obtain them on Internet.

If you are on a Unix machine, we highly recommend Jef Poskanzers free PBMPLUS software, which provides many useful operations on PPM-format image files. In particular, it can convert PPM images to and from a wide range of other formats, thus making cjpeg/djpeg considerably more useful. The latest version is distributed by the NetPBM group, and is available from numerous sites, notably ftp://wuarchive.wustl.edu/graphics/graphics/ packages/NetPBM/. Unfortunately PBMPLUS/NETPBM is not nearly as portable as the IJG software is; you are likely to have difficulty making it work on any non-Unix machine. A different free JPEG implementation, written by the PVRG group at Stanford, is available from ftp://havefun.stanford.edu/pub/jpeg/. This program is designed for research and experimentation rather than production use; it is slower, harder to use, and less portable than the IJG code, but it is easier to read and modify. Also, the PVRG code supports lossless JPEG, which we do not. (On the other hand, it doesnt do progressive JPEG.) FILE FORMAT WARS Some JPEG programs produce files that are not compatible with our library. The root of the problem is that the ISO JPEG committee failed to specify a concrete file format. Some vendors filled in the blanks on their own, creating proprietary formats that no one else could read. (For example, none of the early commercial JPEG implementations for the Macintosh were able to exchange compressed files.) The file format we have adopted is called JFIF (see REFERENCES). This format has been agreed to by a number of major commercial JPEG vendors, and it has become the de facto standard. JFIF is a minimal or low end representation. We recommend the use of TIFF/JPEG (TIFF revision 6.0 as modified by TIFF Technical Note #2) for high end applications that need to record a lot of additional data about an image. TIFF/JPEG is fairly new and not yet widely supported, unfortunately. The upcoming JPEG Part 3 standard defines a file format called SPIFF. SPIFF is interoperable with JFIF, in the sense that most JFIF decoders should be able to read the most common variant of SPIFF. SPIFF has some technical advantages over JFIF, but its major claim to fame is simply that it is an official standard rather than an informal one. At this point it is unclear whether SPIFF will supersede JFIF or whether JFIF will remain the de-facto standard. IJG intends to support SPIFF once the standard is frozen, but we have not decided whether it should become our default output format or not. (In any case, our decoder will remain capable of reading JFIF indefinitely.) Various proprietary file formats incorporating JPEG compression also exist. We have little or no sympathy for the existence of these formats. Indeed, one of the original reasons for developing this free software was to help force convergence on common, open format standards for JPEG files. Dont use a proprietary file format! TO DO The major thrust for v7 will probably be improvement of visual quality.

The current method for scaling the quantization tables is known not to be very good at low Q values. We also intend to investigate block boundary smoothing, poor mans variable quantization, and other means of improving quality-vs-file-size performance without sacrificing compatibility. In future versions, we are considering supporting some of the upcoming JPEG Part 3 extensions --- principally, variable quantization and the SPIFF file format. As always, speeding things up is of great interest. Please send bug reports, offers of help, etc. to jpeg-info@ uunet.uu.net.

n Exhibit-F COPYRIGHT NOTICE, DISCLAIMER, and LICENSE: If you modify libpng you may insert additional notices immediately following this sentence. libpng version 1.2.6, August 15, 2004, is Copyright (c) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors

Cosmin Truta libpng versions 1.0.7, July 1, 2000, through 1.2.5 - October 3, 2002, are Copyright (c) 2000-2002 Glenn Randers- Pehrson, and are distributed according to the same disclaimer and license as libpng-1.0.6 with the following individuals added to the list of Contributing Authors

Simon-Pierre Cadieux Eric S. Raymond Gilles Vollant

and with the following additions to the disclaimer: There is no warranty against interference with your enjoyment of the library or against infringement. There is no warranty that our efforts or the library will fulfill any of your particular purposes or needs. This library is provided with all faults, and the entire risk of satisfactory quality, performance, accuracy, and effort is with the user.

libpng versions 0.97, January 1998, through 1.0.6, March 20, 2000, are Copyright (c) 1998, 1999 Glenn Randers- Pehrson, and are distributed according to the same disclaimer and license as libpng-0.96, with the following individuals added to the list of Contributing Authors:

Tom Lane Glenn Randers-Pehrson Willem van Schaik

libpng versions 0.89, June 1996, through 0.96, May 1997, are Copyright (c) 1996, 1997 Andreas Dilger Distributed according to the same disclaimer and license as libpng- 0.88, with the following individuals added to the list of Contributing Authors:

John Bowler Kevin Bracey Sam Bushell Magnus Holmgren Greg Roelofs Tom Tanner

libpng versions 0.5, May 1995, through 0.88, January 1996, are Copyright (c) 1995, 1996 Guy Eric Schalnat, Group 42, Inc. For the purposes of this copyright and license,Contributing Authors is defined as the following set of individuals:

Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner

The PNG Reference Library is supplied AS IS. The Contributing Authors and Group 42, Inc. disclaim all warranties, expressed or implied, including, without limitation, the warranties of merchantability and of fitness for any purpose. The Contributing Authors and Group 42, Inc. assume no liability for direct, indirect, incidental, special, exemplary, or consequential damages, which may result from the use of the PNG Reference Library, even if advised of the possibility of such damage. Permission is hereby granted to use, copy, modify, and distribute this source code, or portions hereof, for any purpose, without fee, subject to the following restrictions: 1. The origin of this source code must not be

misrepresented. 2. Altered versions must be plainly marked as such and

must not be misrepresented as being the original source.

3. This Copyright notice may not be removed or altered from any source or altered source distribution.

The Contributing Authors and Group 42, Inc. specifically permit, without fee, and encourage the use of this source code as a component to supporting the PNG file format in commercial products. If you use this source code in a product, acknowledgment is not required but would be appreciated. A png_get_copyright function is available, for convenient use in about boxes and the like: printf(%s,png_get_ copyright(NULL)); Also, the PNG logo (in PNG format, of course) is supplied in the files pngbar.png and pngbar. jpg (88x31) and pngnow.png (98x31). Libpng is OSI Certified Open Source Software. OSI Certified Open Source is a certification mark of the Open Source Initiative.

Glenn Randers-Pehrson glennrp@users.sourceforge.net August 15, 2004

n Exhibit-G Copyright (c) 2001,2003 Keith Packard Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Keith Packard not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Keith Packard makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty. KEITH PACKARD DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL KEITH PACKARD BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

4.DBP-A100_Backpage_007.indd 6 2010/08/12 19:38:21

LICENSE7

n Exhibit-H The FreeType Project LICENSE 2002-Apr-11 Copyright 1996-2002 by David Turner, Robert Wilhelm, and Werner Lemberg Introduction The FreeType Project is distributed in several archive packages; some of them may contain, in addition to the FreeType font engine, various tools and contributions which rely on, or relate to, the FreeType Project. This license applies to all files found in such packages, and which do not fall under their own explicit license. The license affects thus the FreeType font engine, the test programs, documentation and makefiles, at the very least. This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion and use of free software in commercial and freeware products alike. As a consequence, its main points are that: We dont promise that this software works. However,

we will be interested in any kind of bug reports. (as is distribution)

You can use this software for whatever you want, in parts or full form, without having to pay us. (royalty- freeusage)

You may not pretend that you wrote this software. If you use it, or only parts of it, in a program, you must acknowledge somewhere in your documentation that you have used the FreeType code. (credits)

We specifically permit and encourage the inclusion of this software, with or without modifications, in commercial products. We disclaim all warranties covering The FreeType Project and assume no liability related to The FreeType Project. Finally, many people asked us for a preferred form for a credit/disclaimer to use in compliance with this license. We thus encourage you to use the following text:

Portions of this software are copyright 1996-2002 The FreeType Project (www.freetype.org). All rights reserved.

Legal Terms 0. Definitions

Throughout this license, the terms package, FreeType Project, and FreeType archive refer to the set of files originally distributed by the authors (David Turner, Robert Wilhelm, and Werner Lemberg) as the FreeType Project, be they named as alpha, beta or final release. You refers to the licensee, or person using the project, where using is a generic term including compiling the projects source code as well as linking it to form a program or executable. This program is referred to as a program using the FreeType engine. This license applies to all files distributed in the original FreeType Project, including all source code, binaries and documentation, unless otherwise stated inthe file in its original, unmodified form a distributed in the original archive. If you are unsure whether or not a particular file is covered by this license, you must contact us to verify this. The FreeType Project is copyright (C) 1996-2000 by David Turner, Robert Wilhelm, and Werner Lemberg. All rights reserved except as specified below.

1. No Warranty THE FREETYPE PROJECT IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT WILL ANY OF THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY DAMAGES CAUSED BY THE USE OR THE INABILITY TO USE, OF THE FREETYPE PROJECT.

2. Redistribution This license grants a worldwide, royalty-free, perpetual and irrevocable right and license to use, execute, perform, compile, display, copy, create derivative works of, distribute and sublicense the FreeType Project (in both source and object code forms) and derivative works thereof for any purpose; and to authorize others to exercise some or all of the rights granted herein, subject to the following conditions:

Redistribution of source code must retain this license file (FTL.TXT) unaltered; any additions, deletions or changes to the original files must be clearly indicated in accompanying documentation. The copyright notices of the unaltered, original files must be preserved in all copies of source files.

Redistribution in binary form must provide a disclaimer that states that the software is based in part of the work of the FreeType Team, in the distribution documentation. We also encourage you to put an URL to the FreeType web page in your documentation, though this isnt mandatory.

These conditions apply to any software derived from or based on the FreeType Project, not just the unmodified files. If you use our work, you must acknowledge us. However, no fee need be paid to us. 3. Advertising

Neither the FreeType authors and contributors nor you shall use the name of the other for commercial, advertising, or promotional purposes without specific prior written permission. We suggest, but do not require, that you use one or more of the following phrases to refer to this software in your documentation or advertising materials: FreeType Project, FreeType Engine, FreeType library, or FreeType Distribution. As you have not signed this license, you are not required to accept it. However, as the FreeType Project is copyrighted material, only this license, or another one contracted with the authors, grants you the right to use, distribute, and modify it. Therefore, by using, distributing, or modifying the FreeType Project, you indicate that you understand and accept all the terms of this license.

4. Contacts There are two mailing lists related to FreeType:

freetype@freetype.org Discusses general use and applications of FreeType, as well as future and wanted additions to the library and distribution. If you are looking for support, start in this list if you havent found anything to help you in the documentation.

devel@freetype.org Discusses bugs, as well as engine internals, design issues, specific licenses, porting, etc.

http://www.freetype.org Holds the current FreeType web page, which will allow you to download our latest development version and read online documentation.

You can also contact us individually at: David Turner Robert Wilhelm Werner Lemberg

n Exhibit-I z This document is freely plagiarised from the Artistic

Licence, distributed as part of the Perl v4.0 kit by Larry Wall, which is available from most major archive sites

This documents purpose is to state the conditions under which these Packages (See definition below) viz: Crack, the Unix Password Cracker, and CrackLib, the Unix Password Checking library, which are held in copyright by Alec David Edward Muffett, may be copied, such that the copyright holder maintains some semblance of artistic control over the development of the packages, while giving the users of the package the right to use and distribute the Package in a more-or-less customary fashion, plus the right to make reasonable modifications. So there. Definitions: A Package refers to the collection of files distributed by the Copyright Holder, and derivatives of that collection of files created through textual modification, or segments thereof. Standard Version refers to such a Package if it has not been modified, or has been modified in accordance with the wishes of the Copyright Holder. Copyright Holder is whoever is named in the copyright or copyrights for the package. You is you, if youre thinking about copying or distributing this Package. Reasonable copying fee is whatever you can justify on the basis of media cost, duplication charges, time of people involved, and so on. (You will not be required to justify it to the Copyright Holder, but only to the computing community at large as a market that must bear the fee.) Freely Available means that no fee is charged for the item itself, though there may be fees involved in handling the item. It also means that recipients of the item may redistribute it under the same conditions they received it. 1. You may make and give away verbatim copies of the

source form of the Standard Version of this Package without restriction, provided that you duplicate all of the original copyright notices and associated disclaimers.

2. You may apply bug fixes, portability fixes and other modifications derived from the Public Domain or from the Copyright Holder. A Package modified in such a way shall still be considered the Standard Version.

3. You may otherwise modify your copy of this Package in any way, provided that you insert a prominent notice in each changed file stating how and when AND WHY you changed that file, and provided that you do at least ONE of the following: a) place your modifications in the Public Domain or

otherwise make them Freely Available, such as by posting said modifications to Usenet or an equivalent medium, or placing the modifications on a major archive site such as uunet.uu.net, or by allowing the Copyright Holder to include your modifications in the Standard Version of the Package.

b) use the modified Package only within your corporation or organization.

c) rename any non-standard executables so the names do not conflict with standard executables, which must also be provided, and provide separate documentation for each non-standard executable that clearly documents how it differs from the Standard Version.

d) make other distribution arrangements with the Copyright Holder.

4. You may distribute the programs of this Package in object code or executable form, provided that you do at least ONE of the following: a) distribute a Standard Version of the executables

and library files, together with instructions (in the manual page or equivalent) on where to get the Standard Version.

b) accompany the distribution with the machine- readable source of the Package with your modifications.

c) accompany any non-standard executables with their corresponding Standard Version executables, giving the non-standard executables non-standard names, and clearly documenting the differences in manual pages (or equivalent), together with instructions on where to get the Standard Version.

d) make other distribution arrangements with the Copyright Holder.

5. You may charge a reasonable copying fee for any distribution of this Package. You may charge any fee you choose for support of this Package. YOU MAY NOT CHARGE A FEE FOR THIS PACKAGE ITSELF. However, you may distribute this Package in aggregate with other (possibly commercial) programs as part of a larger (possibly commercial) software distribution provided that YOU DO NOT ADVERTISE this package as a product of your own.

6. The name of the Copyright Holder may not be used to endorse or promote products derived from this software without specific prior written permission.

7. THIS PACKAGE IS PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.

n Exhibit-J Unless otherwise explicitly stated, the following text describes the licensed conditions under which the contents of this libcap release may be used and distributed: Redistribution and use in source and binary forms of libcap, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain any existing

copyright notice, and this entire permission notice in its entirety, including the disclaimer of warranties.

2. Redistributions in binary form must reproduce all prior and current copyright notices, this list of conditions, and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. The name of any author may not be used to endorse or promote products derived from this software without their specific prior written permission.

4.DBP-A100_Backpage_007.indd 7 2010/08/12 19:38:21

LICENSE 8

ALTERNATIVELY, this product may be distributed under the terms of the GNU General Public License, in which case the provisions of the GNU GPL are required INSTEAD OF the above restrictions. (This clause is necessary due to a potential conflict between the GNU GPL and the restrictions contained in a BSD-style copyright.) THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

n Exhibit-K Copyright 1995 by Wietse Venema. All rights reserved. Some individual files may be covered by other copyrights. This material was originally written and compiled by Wietse Venema at Eindhoven University of Technology, The Netherlands, in 1990, 1991, 1992, 1993, 1994 and 1995. Redistribution and use in source and binary forms are permitted provided that this entire copyright notice is duplicated in all such copies. This software is provided as is and without any expressed or implied warranties, including, without limitation, the implied warranties of merchantibility and fitness for any particular purpose.

n Exhibit-L Copyright (c) 1989 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

n Exhibit-M Copyright (c) 1998 Red Hat Software Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium.

n Exhibit-N Copyright (c) 2004-2005 by Internet Systems Consortium, Inc. (ISC) Copyright (c) 1995-2003 by Internet Software Consortium Permission to use, copy, modify, and distribute this software for any purpose with or without fee is hereby granted, provided that the above copyright notice and this permission notice appear in all copies. THE SOFTWARE IS PROVIDED AS IS AND ISC DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS.

IN NO EVENT SHALL ISC BE LIABLE FOR ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. Internet Systems Consortium, Inc. 950 Charter Street Redwood City, CA 94063 http://www.isc.org/

n Exhibit-O OpenBSD: telnet.c,v 1.6 1998/07/27 15:29:29 millert Exp NetBSD: telnet.c,v 1.7 1996/02/28 21:04:15 thorpej Exp Copyright (c) 1988, 1990, 1993 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

n Exhibit-P ORIGINAL LICENSE: This software is (c) Copyright 1992 by Panagiotis Tsirigotis

The author (Panagiotis Tsirigotis) grants permission to use, copy, and distribute this software and its documentation for any purpose and without fee, provided that the above copyright notice extant in files in this distribution is not removed from files included in any redistribution and that this copyright notice is also included in any redistribution. Modifications to this software may be distributed, either by distributing the modified software or by distributing patches to the original software, under the following additional terms: 1. The version number will be modified as follows:

a. The first 3 components of the version number (i.e . . ) will remain unchanged.

b. A new component will be appended to the version number to indicate the modification level. The form of this component is up to the author of the modifications.

2. The author of the modifications will include his/her name by appending it along with the new version number to this file and will be responsible for any wrong behavior of the modified software.

The author makes no representations about the suitability of this software for any purpose. It is provided as is without any express or implied warranty. Modifications: Version: 2.1.8.7-current Copyright 1998-2001 by Rob Braun Sensor Addition Version: 2.1.8.9pre14a Copyright 2001 by Steve Grubb This is an exerpt from an email I recieved from the original author, allowing xinetd as maintained by me, to use the higher version numbers: I appreciate your maintaining the version string guidelines as specified in the copyright. But I did not mean them to last as long as they did. So, if you want, you may use any 2.N.* (N >= 3) version string for future xinetd versions that you release. Note that I am excluding the 2.2.* line; using that would only create confusion. Naming the next release 2.3.0 would put to rest the confusion about 2.2.1 and 2.1.8.*.

n Exhibit-Q Except where otherwise noted in the source code (e.g. the files hash.c, list.c and the trio files, which are covered by a similar licence but with different Copyright notices) all the files are: Copyright (C) 1998-2003 Daniel Veillard. All Rights Reserved. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

4.DBP-A100_Backpage_007.indd 8 2010/08/12 19:38:21

LICENSE9

THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE DANIEL VEILLARD BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of Daniel Veillard shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from him.

n Exhibit-R LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-core@openssl.org. OpenSSL License Copyright (c) 1998-2004 The OpenSSL Project. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit. (http://www.openssl.org/)

4. The names OpenSSL Toolkit and OpenSSL Project must not be used to endorse or promote products derived from this software without prior written permission. For written permission, please contact openssl-core@openssl.org.

5. Products derived from this software may not be called OpenSSL nor may OpenSSL appear in their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment: This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit (http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.

IN NO EVENT SHALL THE OpenSSL PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. This product includes cryptographic software written by Eric Young (eay@cryptsoft.com). This product includes software written by Tim Hudson (tjh@cryptsoft.com). Original SSLeay License Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com) All rights reserved. This package is an SSL implementation written by Eric Young (eay@cryptsoft.com). The implementation was written so as to conform with Netscapes SSL. This library is free for commercial and non-commercial use as long as the following conditions are aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is covered by the same copyright terms except that the holder is Tim Hudson (tjh@cryptsoft.com). Copyright remains Eric Youngs, and as such any Copyright notices in the code are not to be removed. If this package is used in a product, Eric Young should be given attribution as the author of the parts of the library used. This can be in the form of a textual message at program startup or in documentation (online or textual) provided with the package. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement: This product includes cryptographic software written by Eric Young (eay@cryptsoft.com) The word cryptographic can be left out if the rouines from the library being used are not cryptographic related :-).

4. If you include any Windows specific code (or a derivative thereof) from the apps directory (application code) you must include an acknowledgement: This product includes software written by Tim Hudson (tjh@cryptsoft.com)

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. The licence and distribution terms for any publically available version or derivative of this code cannot be changed. i.e. this code cannot simply be copied and put under another distribution licence [including the GNU Public Licence.]

n Exhibit-S Copyright (c) 1998-2001,2002 Free Software Foundation, Inc. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the Software), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, distribute with modifications, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED AS IS, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE ABOVE COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name(s) of the above copyright holders shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization.

n Exhibit-T Copyright (c) 1990 The Regents of the University of California. All rights reserved. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Copyright (C) 1985-2005 by the Massachusetts Institute of Technology. All rights reserved. Export of this software from the United States of America may require a specific license from the United States Government. It is the responsibility of any person or organization contemplating export to obtain such a license before exporting. WITHIN THAT CONSTRAINT, permission to use, copy, modify, and distribute this software and its documentation for any purpose and without fee is hereby granted, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of M.I.T. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Furthermore if you modify this software you must label your software as modified software and not distribute it in such a fashion that it might be confused with the original MIT software. M.I.T. makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty. THIS SOFTWARE IS PROVIDED AS IS AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.

4.DBP-A100_Backpage_007.indd 9 2010/08/12 19:38:21

LICENSE 10

Individual source code files are copyright MIT, Cygnus Support, OpenVision, Oracle, Sun Soft, FundsXpress, and others. Project Athena, Athena, Athena MUSE, Discuss, Hesiod, Kerberos, Moira, and Zephyr are trademarks of the Massachusetts Institute of Technology (MIT). No commercial use of these trademarks may be made without prior written permission of MIT. Commercial use means use of a name in a product or other for-profit manner. It does NOT prevent a commercial firm from referring to the MIT trademarks in order to convey information (although in doing so, recognition of their trademark status should be given).

The following copyright and permission notice applies to the OpenVision Kerberos Administration system located in kadmin/create, kadmin/dbutil, kadmin/passwd, kadmin/ server, lib/kadm5, and portions of lib/rpc:

Copyright, OpenVision Technologies, Inc., 1996, All Rights Reserved WARNING: Retrieving the OpenVision Kerberos Administration system source code, as described below, indicates your acceptance of the following terms. If you do not agree to the following terms, do not retrieve the OpenVision Kerberos administration system. You may freely use and distribute the Source Code and Object Code compiled from it, with or without modification, but this Source Code is provided to you AS IS EXCLUSIVE OF ANY WARRANTY, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, OR ANY OTHER WARRANTY, WHETHER EXPRESS OR IMPLIED. IN NO EVENT WILL OPENVISION HAVE ANY LIABILITY FOR ANY LOST PROFITS, LOSS OF DATA OR COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY SPECIAL, INDIRECT, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, INCLUDING, WITHOUT LIMITATION, THOSE RESULTING FROM THE USE OF THE SOURCE CODE, OR THE FAILURE OF THE SOURCE CODE TO PERFORM, OR FOR ANY OTHER REASON. OpenVision retains all copyrights in the donated Source Code. OpenVision also retains copyright to derivative works of the Source Code, whether created by OpenVision or by a third party. The OpenVision copyright notice must be preserved if derivative works are made based on the donated Source Code. OpenVision Technologies, Inc. has donated this Kerberos Administration system to MIT for inclusion in the standard Kerberos 5 distribution. This donation underscores our commitment to continuing Kerberos technology development and our gratitude for the valuable work which has been performed by MIT and the Kerberos community.

Portions contributed by Matt Crawford were work performed at Fermi National Accelerator Laboratory, which is operated by Universities Research Association, Inc., under contract DE-AC02-76CHO3000 with the U.S. Department of Energy.

The implementation of the Yarrow pseudo-random number generator in src/lib/crypto/yarrow has the following copyright: Copyright 2000 by Zero-Knowledge Systems, Inc.

Permission to use, copy, modify, distribute, and sell this software and its documentation for any purpose is hereby granted without fee, provided that the above copyright notice appear in all copies and that both that copyright notice and this permission notice appear in supporting documentation, and that the name of Zero-Knowledge Systems, Inc. not be used in advertising or publicity pertaining to distribution of the software without specific, written prior permission. Zero-Knowledge Systems, Inc. makes no representations about the suitability of this software for any purpose. It is provided as is without express or implied warranty. ZERO-KNOWLEDGE SYSTEMS, INC. DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL ZERO-KNOWLEDGE SYSTEMS, INC. BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTUOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.

The implementation of the AES encryption algorithm in src/lib/crypto/aes has the following copyright: Copyright (c) 2001, Dr Brian Gladman , Worcester, UK. All rights reserved. LICENSE TERMS The free distribution and use of this software in both source and binary form is allowed (with or without changes) provided that: 1. distributions of this source code include the above

copyright notice, this list of conditions and the following disclaimer;

2. distributions in binary form include the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other associated materials;

3. the copyright holders name is not used to endorse products built using this software without specific written permission.

DISCLAIMER This software is provided as is with no explcit or implied warranties in respect of any properties, including, but not limited to, correctness and fitness for purpose. The implementation of the RPCSEC_GSS authentication flavor in src/lib/rpc has the following copyright: Copyright (c) 2000 The Regents of the University of Michigan. All rights reserved. Copyright (c) 2000 Dug Song . All rights reserved, all wrongs reversed. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Acknowledgments Appreciation Time!!!! There are far too many people to try to thank them all; many people have contributed to the development of Kerberos V5. This is only a partial listing.... Thanks to Kevin Coffman and the CITI group at the University of Michigan for providing patches for implementing RPCSEC_GSS authentication in the RPC library. Thanks to Derrick Schommer for reporting multiple memory leaks. Thanks to Quanah Gibson-Mount of Stanford University for helping exercise the thread support code. Thanks to Michael Tautschnig for reporting the heap buffer overflow inthe password history mechanism. [MITKRB5- SA-2004-004] Thanks to Wyllys Ingersoll for finding a buffer-size problem in theRPCSEC_GSS implementation. Thanks to the members of the Kerberos V5 development team at MIT, both past and present: Danilo Almeida, Jeffrey Altman, Jay Berkenbilt, Richard Basch, Mitch Berger, John Carr, Don Davis, Alexandra Ellwood, Nancy Gilman, Matt Hancher, Sam Hartman, Paul Hill, Marc Horowitz, Eva Jacobus, Miroslav Jurisic, Barry Jaspan, Geoffrey King, John Kohl, Peter Litwack, Scott McGuire, Kevin Mitchell, Cliff Neuman, Paul Park, Ezra Peisach, Chris Provenzano, Ken Raeburn, Jon Rochlis, Jeff Schiller, Jen Selby, Brad Thompson, Harry Tsai, Ted Tso, Marshall Vale, Tom Yu. Very special thanks go to Marshall Vale, our departing team leader. Over the past few years, Marshall has been extremely valuable to us as mentor, advisor, manager, and friend. Marshalls devotion as a champion of Kerberos has helped our team immensely through many trials and hardships. We will miss him tremendously, and we wish him the best in his future endeavors.

n Exhibit-U Copyright (c) 1989 The Regents of the University of California. All rights reserved. This code is derived from software contributed to Berkeley by Mike Muuss. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the

above copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

This product includes software developed by the University of California, Berkeley and its contributors.

4. Neither the name of the University nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

License Information for the Software Used in the Unit

About GPL (GNU-General Public License), LGPL (GNU Lesser General Public License) License This product uses GPL/LGPL software and software made by other companies. After you purchase this product, you may procure, modify or distribute the source code of the GPL/ LGPL software that is used in the product. DENON provides the source code based on the GPL and LPGL licenses at the actual cost upon your request to our customer service center. However, note that we make no guarantees concerning the source code. Please also understand that we do not offer support for the contents of the source code.

4.DBP-A100_Backpage_007.indd 10 2010/08/12 19:38:21

Manualsnet FAQs

If you want to find out how the DBP-A100 Denon works, you can view and download the Denon DBP-A100 Owner's Manual on the Manualsnet website.

Yes, we have the Owner's Manual for Denon DBP-A100 as well as other Denon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Owner's Manual should include all the details that are needed to use a Denon DBP-A100. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Denon DBP-A100 Owner's Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Denon DBP-A100 Owner's Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Denon DBP-A100 Owner's Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Denon DBP-A100 Owner's Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Denon DBP-A100 Owner's Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.