Contents

Denon AVC-A1SE Upgrade Operating Instructions PDF

1 of 24
1 of 24

Summary of Content for Denon AVC-A1SE Upgrade Operating Instructions PDF

1

ENGLISH

AVR-5800/AVC-A1SE UPGRADE OPERATING INSTRUCTION

Thank you for using the AVR5800/AVC-A1SE Upgrade Service. When using the amplifier after upgrading it, please refer to these instructions as well as the operating instructions included with the AVR5800/AVC-A1SE.

4 FEATURES

1. Lucasfilm THX Ultra2 Certified

Home THX is the unique collaboration between Lucasfilm Ltd. and audio equipment manufacturers. THX Ultra2 certification is the highest performance level, and provides a rigorous set of performance standards, along with proprietary surround sound post-processing technologies, designed to enhance the surround soundtrack playback experience in the home theater. In addition to improvements to the power amplifier with respect to previous THX Ultra standards, two surround modes have been added: the THX Ultra2 Cinema mode and the THX Music mode.

2. DTS 96/24 compatibility

The AVR-5800/AVC-A1SE Upgrade is compatible with sources recorded in DTS 96/24, a new multi-channel digital signal format developed by Digital Theater Systems Inc. DTS 96/24 sources can be played in the multi-channel mode on the AVR-5800/AVC-A1SE Upgrade with high sound quality of 96 kHz/24 bits or 88.2 kHz/24 bits.

3. Dolby Pro Logic II decoder

Dolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround but also regular stereo sources into five channels (front left/right, center and surround left/right). In addition, various parameters can be set according to the type of source and the contents, so you can adjust the sound field with greater precision.

4. Dolby Headphone Compatibility

This is a three-dimensional sound technology developed jointly by Dolby Laboratories and Lake Technoligy Ltd. of Australia for achieving surround

sound using regular headphones.

5. DENON Link

This terminal can be used to connect a Denon DVD player for high quality digital multichannel playback.

6. Digital Ext. In

This is a function for future system expansion when using digital multichannel connections.

7. Auto Surround Mode

This function stores the surround mode last used for an input signal in the memory and automatically sets that surround mode the next time that signal is input.

8. Audio Delay

This is a function for delaying the audio signal with respect to the video signal. (0 to 200 msec)

9. Setup Lock

This is a function that locks the system setup and surround parameter settings, etc., so that they cannot be changed.

10. Delay Time

The maximum settable value has been changed from 15 feet to 20 feet, the setting steps from 1 foot to 0.1 feet.

7 SETTING UP THE SYSTEM

System setup items and default values (set upon shipment from the factory)

System setup Default settings

q

w

e

t

y

!1

Speaker Configuration

Surround Speaker Setting

Subwoofer mode

Channel Level

Subwoofer Peak Limit Lev

Digital In Assignment

On Screen Display

Input the combination of speakers in your system and their corresponding sizes (Small for regular speakers, Large for full- size, full-range) to automatically set the composition of the signals output from the speakers and the frequency response.

Use this function when using multiple surround speaker combinations for more ideal surround sound. Once the combinations of surround speakers to be used for the different surround modes are preset, the surround speakers are selected automatically according to the surround mode.

This selects the subwoofer speaker for playing deep bass signals.

This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum effects.

This parameter is for detecting the maximum level of the low bass signals output from the subwoofer channel in order to protect the subwoofer from damage and prevent unpleasant distorted sounds from being produced.

This assigns the digital input jacks for the different input sources.

This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated (from MONITOR 1 outputs only).

Surround mode

Surround speaker

Input source

Digital Inputs

Front Sp.

Small

Center Sp. Surround Sp.Sub Woofer

Small SmallYes

DOLBY/ DTS

SURROUND

THX/ THX 5.1

WIDE SCREEN

5CH/7CH STEREO

DSP SIMULATION

EXT. IN-1 EXT. IN-2

A A A A A A A

LFE THX

Front L & R Center Surround L & RSub Woofer

12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m)12 ft (3.6 m)

Front L Center Front R Surround Back R

Surround L

Subwoofer

0 dB 0 dB 0 dB 0 dB 0 dB 0 dB

Peak Limitter = OFF

CD DVD VDP TV DBS/ SAT

VCR-1 VCR-2 TAPE-2

COAXIAL 1

COAXIAL 2

COAXIAL 3

OPTICAL 1

OPTICAL 2

OPTICAL 3

OPTICAL 4

OPTICAL 6

On Screen Display = ON

Surround Back Sp.

Small / 2spkrs

Delay Time This parameter is for optimizing the timing with which the audio signals are produced from the speakers and subwoofer according to the listening position.

SBL & SBR

10 ft (3.0 m)

r THX Audio Setup

When using a THX Ultra2 compatible subwoofer, set the subwoofers frequency response.

THX Ultra2 Subwoofer = NO

Surround Back L

0 dB

Surround R

0 dB

TAPE-1

OPTICAL 5

VCR-3

COAXIAL 4

V. AUX

COAXIAL 5

Crossover Frequency

Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer.

FIXED THX

u

Multi Zone Control

Variable

When using two surround back speakers, set the distance of the two speakers.

The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0.3 m)

Boundary Gain compensation

Surround Back Speaker Position

i

Audio Delay Adjust the time delay of the video and audio signals. Audio Delay = 0 ms

!3 Setup Lock Set whether or not to lock the system setup settings so that they cannot be changed.

Setup Lock = OFF

This sets the output level for the multi-zone 1 output jacks.

Set this to switch the surround back channels power amplifier for use for multi- zone 2.

Multi Zone-1 Vol. Level

Power AMP Assignment

Surround back

o Auto Surround Mode

Auto surround mode function setting. Auto Surround Mode = ON

!0 Digital Multi Ch In

Digital multichannel input setting. DENON Link = OFF, Digital Ext. In = OFF

!2

Auto Tuner Presets

(AVR-5800 only)

FM stations are received automatically and stored in the memory.

A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz

B1 ~ B8 520/600/1000/1400/1500/1710 kHz/90.1/90.1 MHz

C1 ~ C8 90.1 MHz

D1 ~ D8 90.1 MHz

E1 ~ E8 90.1 MHz

This upgrade adds the following functions and specifications:

2

ENGLISH

Setting the Crossover Frequency

1 Select the Crossover Frequency mode.

Set the crossover frequency according to the speaker system being used. Select Speaker Configuration on the System Setup Menu screen, then press jog stick ENTER twice or

three times.

Select the Frequency.

2 Enter the setting. The System Setup Menu reappears.

Crossover frequency

Set the frequency (Hz) below which the bass sound of each main speakers is to output from the subwoofer or from speakers which are set to Large (when not using a subwoofer) (crossover frequency).

For speakers set to Small, sound with a frequency below the crossover frequency is cut, and instead the cut bass sound is output from the subwoofer or speakers which are set to Large.

This crossover frequency mode is valid when Subwoofer is set to Yes at Speaker Configuration Setting or when speakers are set to Small.

FIXED THX: Set to the THX rated 80 Hz crossover frequency.

VARIABLE 40, 60, 80, 100, 120 Hz: Set as desired according to your speakers bass playback ability.

NOTES: The crossover frequency is set to 80 Hz in the HOME THX CINEMA mode. We recommend using with the crossover frequency set to FIXED THX, but depending on the speaker,

setting it to a different frequency may improve frequency response near the crossover frequency.

2 Select Boundary Gain Compensation, then press jog stick ENTER.

Make these settings when Yes is selected for the subwoofer in the Speaker Configuration settings. There is not displayed when No selected.

Settings for using a THX Ultra2 compatible subwoofer

1 Select THX Audio Setup on the System Setup Menu screen, then press jog stick ENTER to switch to the THX Audio Setup screen.

3 When using a THX Ultra2 compatible subwoofer or subwoofer that frequency response extends to 20 Hz, select Yes. Otherwise select No.

4 Press jog stick ENTER to return to the THX Audio Setup screen.

When Yes is selected Boundary Gain Compensation can be selected and the compensation set to OFF.

If the bass sound seems too strong Set Boundary Gain Compensation to ON. This activates a circuit that cuts the low frequencies of 55 Hz and under. Select ON or OFF according to how strong you like the bass sound to be.

When two surround back speakers have been set in the Speaker Configuration settings, set the distance of the speakers. There is not displayed when 1spkr selected.

This setting is necessary to achieve the optimum effect in the THX Surround EX, THX Ultra2 Cinema and THX Music modes. It is recommended that SBL/SBR speakers are placed together as close as possible.

Surround Back Speaker Position settings

1 Select Surround Back Speaker Position on the THX Audio Setup screen, then press jog stick ENTER.

2 Select the settings according to the distances of the two surround back speakers.

3 Press jog stick ENTER to return to the THX Audio Setup screen.

4 Select Exit then press jog stick ENTER to return to the System Setup Menu screen.

3

ENGLISH

This function allows you to adjust the time delay of the video and audio signals and store these settings for the different input sources. The setting is made while watching a DVD or other software, so it is not made here. By default, this is not displayed when no digital signals are being input. For instructions on making the setting, refer to page 8.

Adjusting the Audio Delay

Setting the Auto Surround Mode

The surround mode last used for the three types of input signals shown below is stored in the memory and the signal is automatically played with that surround mode the next time it is input. Note that the surround mode setting is also stored separately for the different input sources.

q Analog and PCM 2-channel signals w 2-channel signals of Dolby Digital, DTS or other multichannel format e Multichannel signals of Dolby Digital, DTS or other multichannel format

1 Select Auto Surround Mode on the System Setup Menu screen, then press jog stick ENTER.

2 Select ON if you want to use the auto surround mode, OFF if you do not want to use it.

3

This is set for the Digital Ext. In input using the Coaxial 1 to 4 inputs. When set to ON, the four terminals (Coaxial 1 to 4) are assigned to the desired input source as a single digital multichannel input. When set to OFF the four terminals (Coaxial 1 to 4) are assigned to individual input sources.

3 Enter the setting. The System Setup Menu reappears.

Digital Ext. In setting :

Setting the Digital Multi CH In

1 Select Digital Multi Ch In on the System Setup Menu screen, then press jog stick ENTER.

Set this when connecting a Denon DVD player using the Denon Link terminal.

Set to ON if you want to use the terminal, OFF if you do not want to use it. When set to ON, also set the playback input when there is no digital signal.

ANALOG: The analog input of the input source assigned to Denon Link is played.

EXT.-1: The EXT.IN-1 input is played. EXT.-2: The EXT.IN-2 input is played.

DENON Link setting :

4 Enter the setting. The System Setup Menu reappears.

The system setup settings can be locked so that they cannot be changed easily.

Protecting the settings

1 Select Setup Lock on the System Setup Menu screen, then press jog stick ENTER to switch to the Setup Lock screen.

2 Select ON, to lock the system setup settings.

3 Press jog stick ENTER to finalize the setting and exit the system setup mode.

When the setup lock function is activated, the settings listed below cannot be changed, and Setup Locked is displayed when related buttons are operated.

System setup settings Surround parameter settings Tone control settings Channel level settings (including test tones)

To unlock, press the System Setup button again and display the Setup Lock screen, then select OFF.

2 To set, select Yes and press jog stick ENTER.

When ON was selected at Digitl Ext. In, set the surround back channel input. If you do not want to use the surround back channel ........NOT USED If you do want to use the surround back channel, set according to the specifications of the connected player.

4

ENGLISH

Playing modes for different sources

The AVR-5800/AVC-A1SE Upgrade is equipped with many surround modes. We recommend using the surround modes as described below in order to achieve the maximum effect for the specific signal source.

Though we recommend selecting the surround mode as described above, other surround modes can also be selected.

2 ch sources recorded in Dolby Surround

Sources recorded in stereo

Sources recorded in monaural

Sources recorded in

Dolby Digital Surround EX Maximum performance for playing movies on the AVR-5800/AVC-A1SE Upgrade.

This mode is optimized for playing sources recorded in Dolby Digital Surround EX.

Dolby Digital or DTS Surround

THX SURROUND EX

DOLBY DIGITAL EX

DTS-ES DSCRT 6.1, MTRX 6.1

Effective for 2-channel sources recorded in Dolby Surround or for 7.1-channel playback with 5.1-channel sources.

WIDE SCREEN

These modes are suited for playing 5.1-channel sources in 7.1 channels. Select the desired surround mode for the movie and music sources.

THX Ultra2 CINEMA* and THX MUSIC MODE*

This mode is optimized for playing 5.1-channel movies. For sources recorded in Dolby Surround as well, this mode provides the

same power as with 5.1-channel sources.

HOME THX CINEMA (THX 5.1)

This mode is optimized for playing 5.1-channel music. For Dolby surround recording sources, Dolby Pro-Logic II playback is

conducted.

DOLBY DIGITAL / DTS SURROUND / DTS 96/24

By suspending all the video circuits, analog input music playback can be played with optimum quality. (The video outputs do not operate.)

PURE DIRECT

This surround mode plays stereo sources developed by Dolby Laboratories in 5.1 channels.

Select one of the three playback modes according to your tastes.

DOLBY PROLOGIC II

Effective for achieving pure playback. If there is no need for tone control or distribution of the low frequencies in

function of the speaker configuration, select the DIRECT mode to achieve the best sound quality.

DIRECT / STEREO

Select these for 7.1-channel playback with sources recorded in stereo or monaural.

The effects are different for each of the surround modes. Select the one most suited for the source being used.

DENON Original Surround Modes

5.1 ch sources

Sources recorded in DTS-ES This is the optimum mode for playing sources recorded in DTS-ES.

When playing movies, setting this mode sometimes results in a more natural sound. Select the mode as desired.

THX DSCRT 6.1, MTRX 6.1

is a 6.1-channel/7.1-channel surround mode.

This is a surround mode for playing 6.1- or 7.1-channel stereo sources developed by Digital Theater Systems.

One of two playing modes, MUSIC (for music sources) or CINEMA (for movie sources), can be selected according to your preferences.

DTS NEO:6

NOTE: Surround modes indicated with an asterisk (*) require the use of two surround back speakers.

10 SURROUND

[1] Playing sources recorded in Dolby Surround in the Home THX Cinema surround mode

THX Surround EX / Home THX Cinema mode

When the HOME THX CINEMA button is pressed, the surround mode is set as follows according to the signal that is played:

q THX Surround EX (THX Ultra2 Cinema) w Home THX CINEMA e THX 5.1 r THX DSCRT 6.1, THX MTRX 6.1

When the HOME THX CINEMA mode is set when a DVD is played, check the DVD players digital output setting and change the setting to one for which Dolby Digital and DTS bit stream signals can be output (bit stream, for example).

1 q Select the input source.

INPUT SELECTOR

(Main unit) (Remote control unit)

1-q

1-w

3

5, 7

6

4

1-w2

1-q 4

2 Select the Home THX Cinema mode. HOME

THX CINEMA

(Main unit) (Remote control unit)

3 Play a program source with the mark. For operating instructions, refer to the

manuals of the respective components.

w Set the input mode to AUTO. INPUT MODE

(Main unit) (Remote control unit)

4 Adjust volume.

MASTER VOLUME

(Main unit) (Remote control unit)

5 Display the Surround Parameter screen and set the parameters according to the source.

(Remote control unit)

5

ENGLISH

Surround parameters w For instructions on setting the surround parameters, see page 4. MODE/SB CH OUT: Select the surround back channel playback method or surround mode.

THX Surround EX........Dolby Digital signals are played in the THX Surround EX mode. Ultra2 Cinema .............The signals are played in the THX Ultra2 Cinema mode. Music Mode................The signals are played in the THX Music mode. NON MTRX.................The same signals as those of the surround channels are output from the surround

back channels. MTRX ON ...................The surround channel signals undergo digital matrix processing and are output

from the surround back channels. SB OFF (OFF)..............No signal is played from the surround back channels. ES MTRX ....................When playing DTS signals, the surround back signals undergo digital matrix

processing for playback. ES DSCRT...................When a signal identifying the source as a discrete 6.1-channel source is included

in the DTS signals, the surround back signals included in the source are played. AFDM (Auto Flag Detect Mode):

ON .......This function only works with software on which a special identification signal is recorded. This software is scheduled to go on sale in the future. This is a function for automatically playing in the 6.1-channel mode using the surround back speakers if the software is recorded in THX Surround EX or DTS-ES or in the normal 5.1-channel mode without using the surround back speakers when the software is not recorded in THX Surround EX or DTS-ES.

OFF......Set the OFF mode to perform 6.1-channel playback with conventional 5.1-channel sources or sources on which the identification signal described below is not recorded.

6 q Select the parameter.

(Remote control unit)

w Select the setting.

(Remote control unit)

7

Surround parameters q

DECODER: Select the decoder to be used when playing 2-channel sources in the Home THX Cinema mode.

PL II C........The signals are decoded in the Dolby Pro Logic II Cinema mode before undergoing THX processing.

PL II E........The signals are decoded in the Dolby Pro Logic emulation mode before undergoing THX processing.

NEO:6 C ....The signals are decoded in the NEO:6 Cinema mode before undergoing THX processing. MODE/SB CH OUT: Select the surround back channel playback method or surround mode.

NORMAL (ON)............This is the recommended play mode for using the surround back channel when DTS NEO:6 is selected.

NORMAL (OFF) ..........This is the recommended play mode when Dolby Pro Logic II is selected. The surround back channel is not played.

Checking the input signal

The input signal can be checked by pressing the remote control units ON SCREEN button.

SIGNAL: Displays the type of signal (DTS, DOLBY DIGITAL, PCM, etc.).

fs: Displays the input signals sampling frequency. FORMAT: Displays the input signals number of channels.

Number of front channels/Number of surround channels/LFE on/off SURROUND is displayed for 2-channel signal sources recorded in Dolby Surround.

OFFSET: Displays the dialog normalization offset value. FLAG: Displays the special identification signal recorded in the input

signal. MATRIX is displayed when matrix processing is conducted on the surround back channel, DISCRETE is displayed when discrete processing is conducted. Not displayed when no identification signal is recorded.

In addition, screen information is displayed in the following order when the OSD button is pressed repeatedly:

OSD-1 Input signal OSD-2 Input/output OSD-3 Auto surround mode OSD-3 ~ 7 Tuner preset stations

NOTE: OSD-3: This is displayed when the auto surround mode is set to ON and the input mode is

set to Auto. It is not displayed when the input mode is set to Analog or EXT. IN-1,-2.

OSD-3 ~ 7: AVR-5800 only.

(Remote control unit)

Selecting a digital input source

The Dolby Digital indicator lights when playing Dolby Digital sources.

DIGITAL

When playing DTS sources, the DTS indicator lights.

The surround back indicator lights green when playing in the THX SURROUND EX mode.

SURROUND BACK CH

OUTPUT

[2] To play in the THX Surround EX/Home THX Cinema Surround mode for sources recorded in Dolby Digital or DTS

1 Select the program source.

Perform step 1 under Dolby Digital mode and DTS Surround.

2 Select the Home THX Cinema mode. HOME

THX CINEMA

(Main unit) (Remote control unit)

3 Play a program source with the , mark.

For operating instructions, refer to the manuals of the respective components. The channel status information during playback of Dolby Digital and DTS sources can be checked using the STATUS button on the main unit.

2

32 3

Press the SURR.PARA. button to complete the setting.

(Remote control unit)

6

ENGLISH

1-w 2

1-q 3 3

1-q

1-w

2

2

4, 6

5

Dolby Digital mode (only with digital input) and DTS Surround

(only with digital input)

Playback with digital input 1 Select the input source.

q Select an input source set to digital (COAXIAL/OPTICAL).

INPUT SELECTOR

(Main unit) (Remote control unit)

w Set the input mode to AUTO. INPUT MODE

(Main unit) (Remote control unit)

2 Select the Surround mode. DOLBY

SURROUND DTS

SURROUND

(Main unit) (Remote control unit)

3 Play a program source with the , mark.

4 Display the surround parameter menu.

(Remote control unit)

5 q Select the various parameters.

(Remote control unit)

w Adjust the parameter settings.

(Remote control unit)

DIGITAL

The DTS indicator lights when playing DTS sources.Light

Light SIGNAL DETECT

The SIGNAL DETECT indicator lights when playing sources on which a special identification signal is recorded.

Light

The Dolby Digital indicator lights when playing Dolby Digital sources.

6 Press the SURR.PARA. button to complete the setting.

(Remote control unit)

5 Select the optimum mode for the source.

CINEMA / MUSIC

(Main unit) (Remote control unit)

DOLBY PL II CINEMA DOLBY PL II MUSIC DOLBY PL II EMULATION

1 Select the function to which the component you want to play is connected.

EX:

2 Select the Dolby Surround Pro Logic II mode.

Dolby Surround Pro Logic II mode

INPUT SELECTOR

(Main unit) (Remote control unit)

3 Play a program source with the mark. For operating instructions, refer to the manuals of the respective components.

Light

(Main unit) (Remote control unit)

DOLBY SURROUND

Select the DOLBY PRO LOGIC II mode using the DOLBY SURROUND buttons.

The Dolby Pro Logic indicator lights.

4, 5

1 2

21

4, 7

5, 6

4 Select the surround parameter mode.

CINEMA / MUSIC

(Main unit) (Remote control unit)

ENGLISH

7

6 q Select the various surround parameters.

DEFAULT setting

NOTE: When making parameter settings, the display

will return to the regular condition several seconds after the last button (main unit) was pressed and the setting will be completed.

Surround parameters e

Pro Logic II Mode: The Cinema mode is for use with stereo television shows and all programs encoded Dolby Surround. The Music mode is recommended as the standard mode for autosound music systems (no video), and is optional for A/V systems. The Pro Logic Emulation mode offers the same robust surround processing as original Pro Logic in case the source contents is not of optimum quality. Select one of the modes (Cinema, Music or EML). Panorama Control: This mode extends the front stereo image to include the surround speakers for an exciting wraparound effect with side wall imaging. Select OFF or ON. Dimension Control: This control gradually adjust the soundfield either towards the front or towards the rear. The control can be set in 7 steps from 0 to 6. Center Width Control: This control adjust the center image so it may be heard only from the center speaker; only from the left/right speakers as a phantom image; or from all three front speakers to varying degrees. The control can be set in 8 steps from 0 to 7.

(Remote control unit) (Remote control unit)

Dolby Headphone

The Dolby Headphone mode is set when headphones are connected to the PHONES jack while in the DOLBY/DTS SURROUND mode.

1 When the SURR. PARA. button is pressed, the parameter selection screen appears.

2(Remote control unit)

1, 3

Parameters

MODE: DH1.............Reference room (small room with weak reverberations) DH2.............Live room (room with a bit stronger reverberations than DH1) DH3.............Large room (larger room than DH1, offers a sense of distance and sound diffusion effects) BYPASS.......Stereo sound.

DECODER: Select this when playing analog, PCM or other 2-channel sources. The signals are converted into multichannel signals using the decoders shown below and played in the Dolby Headphone mode. This is not displayed in the BYPASS mode.

PL II C .........Dolby Pro Logic II Cinema mode PL II M ........Dolby Pro Logic II MusicMode NEO:6 C......DTS NEO:6 Cinema mode NEO:6 M.....DTS NEO:6 Music mode OFF .............The signals are played in the Dolby Headphone mode as such (2 channels).

Recording When RECOUT mode is set to SOURCE, with this amplifier signals encoded in the Dolby Headphone mode can be output from the recording output terminals and recorded on another recorder. 1. The Dolby Headphone play mode is set when headphones are connected to the PHONES jack during

playback in the DOLBY/DTS surround mode. 2. When this is done, signals encoded in the Dolby Headphone mode are automatically output from the

recording output terminals (analog and digital) and can be recorded. 3. Select the parameters and set the desired mode, then record.

NOTE: Do not disconnect the headphones during recording.

2 q Select the parameter.

(Remote control unit)

w Select the setting.

(Remote control unit)

3 Press the SURR.PARA. button to complete the setting.

(Remote control unit)

w Adjust the parameter setting.

Select Default Yes 0 then parameters set to default setting.

(Remote control unit)

7 Press the SURR.PARA. button to complete the setting.

(Remote control unit)

1. CENTER IMAGE (0.0 to 0.5: default 0.2) The center image parameter for adjusting the expansion of the center channel in the DTS NEO:6 MUSIC mode has been added.

2. Subwoofer channel OFF setting The subwoofer channel can now be set to OFF in all the surround modes. OFF is set when the channel level is adjusted one step below -12 dB.

3. PURE DIRECT mode The setting is now backed up.

4. Channel level and fader adjustment

Channel selection

Level adjustment and fader adjustment

8

ENGLISH

1-w

1-q 1-e

2, 7

1-q

1-w

1-e

3, 4,

5, 6

Adjusting the Audio Delay

1 q Select the input source.

INPUT SELECTOR

(Main unit) (Remote control unit)

w Set the input mode to Auto. INPUT MODE

(Main unit) (Remote control unit)

When watching a DVD or other video source, the picture on the monitor may seem delayed with respect to the sound. In this case, adjust the audio delay to delay the sound and synchronize it with the picture. The audio delay setting is stored separately for each input source.

e Select Dolby/DTS Surround. DOLBY

SURROUND DTS

SURROUND

(Main unit) (Remote control unit)

r Play a program source (DVD, etc.).

2 Press the SYSTEM SETUP button and display the System Setup Menu screen.

(Remote control unit)

3 Select Audio Delay on the System Setup Menu screen.

(Remote control unit)

4 Press jog stick ENTER to switch to the Audio Delay adjustment screen.

(Remote control unit)

5 Set the delay time. (0 ms ~ 200 ms)

(Remote control unit)

With a movie source, for example, adjust so that the movement of the actors lips is synchronized with the sound.

6 Press jog stick ENTER to return to the System Setup Menu screen.

7 Press the SYSTEM SETUP button to complete the setting.

NOTE: The audio delay setting does not apply when playing in the EXT. IN mode or in the analog input direct mode or stereo mode (only when the crossover frequency is set to FIXED - THX or front speaker is set to Large).

2 Differences in surround mode names depending on the input signals

Input signals

PURE DIRECT, DIRECT

STEREO

HOME THX CINEMA

DTS SURROUND

DTS NEO:6

DOLBY DIGITAL

DOLBY PRO LOGIC II

DSP SIMULATION

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS SURROUND

E E

E

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS 96/24

E E

E

C

C C

B THX DSCRT6.1

THX MTRX6.1

B DTS ES DSCRT6.1

DTS MTRX6.1

E E

E

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX SURROUND EX

THX Ultra2 Cinema

THX Music Mode

THX5.1

E

E DOLBY DIGITAL EX

DOLBY DIGITAL

E

C

ANALOG LINEAR PCM DTS (5.1 ch) DTS 96/24(5.1 ch) DTS (6.1 ch) D. D. (2 ch) D. D. (5.1 ch)

DTS DOLBY DIGITALSurround Mode

C : Selectable : The surround mode name differs depending on the MODE/SB CH OUT surround parameter setting. B : The surround mode name differs depending on the input signal. E : Not selectable

2 Other changes

Digital transfer and multi-channel playback of DVD audio discs and other multi-channel sources is possible by connecting the AVR5800/AVC-A1SE to a Denon DVD player equipped with a DENON Link connector using the connection cable included with the DVD player. With discs on which special copyright protection measures have been taken, however, the digital signals may not be output from the DVD player. In this case, connect the DVD players analog multi-channel output to the AVR5800/AVC-A1SEs EXT.IN-1 or EXT.IN-2 terminals for playback. Also refer to your DVD players operating instructions.

2 Playback using the DENON Link connector

9

DEUTSCH

AVR-5800/AVC-A1SE UPGRADE-BEDIENUNGSANLEITUNG

Wir danken Ihnen fr die Inanspruchnahme des AVR-5800/AVC-A1SE Upgrade-Services. Beziehen Sie sich nach dem Upgrade des Verstrkers bezglich der Benutzung sowohl auf diese als auch auf die mit dem AVR-5800/AVC-A1SE mitgelieferte Bedienungsanleitung.

4 AUSSTATTUNGSMERKMALE

1. Lucasfilm THX Ultra2 zertifiziert

Home THX ist die einzigartige Zusammenarbeit zwischen Lucasfilm Ltd. und Herstellern von Audiogerten. Die THX Ultra 2 Zertifikation ist die hchste Qualittsnorm und bietet eine Vielzahl von rigorosen Leistungsstandards zusammen mit eigenen Surroundklang-Nacharbeitungstechnologien. Dadurch wird die Surround-Soundtrack- Wiedergabe in Ihrem Heimkino zu einem immer wieder unvergesslichen Erlebnis. Neben Verbesserungen am Leistungsverstrker im Vergleich zu frheren THX Ultra Standards, wurden die Surround-Modi um zwei weitere Modi ergnzt: Dem THX Ultra2 Kino-Modus und dem THX Musik-Modus.

2. DTS 96/24-Kompatibilitt Der AVR-5800/AVC-A1SE Upgrade ist mit in DTS 96/24 aufgenommenen Quellen kompatibel; bei DTS 96/24 handelt es sich um ein neues Multikanal-Digitalsignal-Format, das von Digital Theater Systems Inc. entwickelt wurde. DTS 96/24-Quellen knnen im Multikanal-Betrieb des AVR-5800/AVC-A1SE Upgrade mit einer hohen Tonqualitt von 96 kHz/24 Bits oder 88,2 kHz/24 Bits wiedergegeben werden.

3. Dolby Pro Logic II-Dekoder Dolby Pro Logic II ist ein neues Format fr die Wiedergabe von Multikanal-Audiosignalen. Dieses neue Format enthlt Verbesserungen des herkmmlichen Dolby Pro Logic. Es kann nicht nur zum Entschlsseln von in Dolby Surround aufgenommenen Tonquellen, sondern auch zum Entschlsseln von normalen Stereotonquellen in fnf Kanle (vorne links/rechts, Mitte und Surround links/rechts) verwendet werden. Darber hinaus knnen verschiedene Parameter entsprechend der Art und des Inhaltes der Tonquelle eingestellt werden, so dass sich das Klangfeld mit einer hheren Przision einstellen lsst.

4. Dolby-Kopfhrer-Kompatibilitt

(Dolby Headphone Compatibility)

Hierbei handelt es sich um eine dreidimensionale Klangtechnologie, die gemeinsam von Dolby Laboratories und Lake Technology Ltd. entwickelt wurde.Aus Australien zum Erreichen von Surroundklang mit herkmmlichen Kopfhrern.

5. DENON-Link

An diese Buchse kann ein Denon DVD-Player fr hochqualitative digitale Multikanalwiedergabe angeschlossen werden.

6. Digitaler Ext.-Eingang

(Digital Ext. In)

Hierbei handelt es sich um eine Funktion fr eine sptere Systemerweiterung bei Benutzung digitaler Multikanal-Anschlsse.

7. Automatik-Surround-Modus

(Auto Surround Mode)

Diese Funktion legt den fr einen Signaleingang zuletzt verwendeten Surround-Modus im Speicher ab und stellt diesen Surround-Modus beim nchsten Eingang des entsprechenden Signalmodus automatisch wieder ein.

8. Tonverzgerung (Audio Delay)

Diese Funktion verzgert das Audiosignal in Bezug auf das Videosignal.(0 bis 200 msec)

9. Systemseinrichtungs-Sperre (Setup Lock)

Diese Funktion sperrt die Systemeinrichtung und die Surround-Parameter usw., so dass diese nicht gendert werden knnen.

10. Verzgerungszeit (Delay Time)

Der maximal einstellbare Wert ist von 15 Fu auf 20 Fu gendert worden, die Einstellschritte wurden von 1 Fu auf 0,1 Fu gendert.

7 SYSTEM-EINRICHTUNG

System-Einrichtungen und Standardwerte (werkseitig eingestellt)

System-Einrichtung Standard-Einstellung

q

w

e

t

y

!1

Speaker Configuration

Surround Speaker Setting

Subwoofer mode

Channel Level

Subwoofer Peak Limit Lev

Digital In Assignment

On Screen Display

Geben Sie die Kombination der Lautsprecher in Ihrem System und deren entsprechende Gren (SMALL fr herkmmliche Lautsprecher, Large fr groe Lautsprecher, Gesamtbereich) ein, um automatisch die Zusammensetzung der Signale, die von den Lautsprechern ausgegeben werden, und den Frequenzgang einzustellen.

Wenden Sie diese Funktion an, wenn Sie mehrere Surround-Lautsprecher-Kombinationen fr perfekteren Surround-Klang zum Einsatz bringen. Wenn die Kombinationen der Surround- Lautsprecher, die fr die verschiedenen Surround- Modi verwendet werden sollen, einmal eingegeben worden sind, werden die Surround- Lautsprecher automatisch entsprechend des Surround-Modus angewhlt.

Dies whlt den Subwoofer-Lautsprecher zur Wiedergabe von tiefen Basignalen an.

Hiermit wird die Lautstrke des Signalausgangs von den Lautsprechern und dem Subwoofer fr die verschiedenen Kanle eingestellt, um optimale Effekte zu erzielen.

Unterer Grenzwert Dieser Parameter dient der Erkennung des maximalen Pegels des Niederba-Signalausgangs vom Subwoofer-Kanal, um den Subwoofer vor Beschdigungen zu schtzen und verhindert darber hinaus unangenehme Tonverzerrungen.

Hier werden die digitalen Eingangsbuchsen den verschiedenen Eingangsquellen zugeordnet.

This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated (from MONITOR 1 outputs only).

Surround -Modus

Surround- Laut-

sprecher

Eingangs -quelle

Digital- Eingnge

Front Sp.

Small

Center Sp. Surround Sp.Sub Woofer

Small SmallYes

DOLBY/ DTS

SURROUND

THX/ THX 5.1

WIDE SCREEN

5CH/7CH STEREO

DSP SIMULATION

EXT. IN-1 EXT. IN-2

A A A A A A A

LFE THX

Front L & R Center Surround L & RSub Woofer

12 ft (3,6 m) 12 ft (3,6 m) 10 ft (3,0 m)12 ft (3,6 m)

Front L Center Front R Surround Back R

Surround L

Subwoofer

0 dB 0 dB 0 dB 0 dB 0 dB 0 dB

Peak Limitter = OFF

CD DVD VDP TV DBS/ SAT

VCR-1 VCR-2 TAPE-2

COAXIAL 1

COAXIAL 2

COAXIAL 3

OPTICAL 1

OPTICAL 2

OPTICAL 3

OPTICAL 4

OPTICAL 6

On Screen Display = ON

Surround Back Sp.

Small / 2spkrs

Delay Time Dieser Parameter dient der Optimierung des Timings, mit dem die Audio-Signale von den Lautsprechern und dem Subwoofer entsprechend der Zuhrposition produziert werden.

SBL & SBR

10 ft (3,0 m)

r THX Audio Setup

Bei Anwendung eines THX Ultra2 kompatiblen Subwoofer-Frequenzganges

THX Ultra2 Subwoofer = NO

Surround Back L

0 dB

Surround R

0 dB

TAPE-1

OPTICAL 5

VCR-3

COAXIAL 4

V. AUX

COAXIAL 5

Crossover Frequency

Stellen Sie die Frequenz (Hz) ein, unterhalb derer der Bass-Sound der verschiedenen Lautsprecher vom Subwoofer ausgegeben werden soll.

FIXED THX

u

Multi Zone Control

Variable

Stellen Sie die Entfernung bei der Benutzung von zwei Surround-Lautsprechern auf die Entfernung der beiden Lautsprecher ein.

The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0,3 m)

Boundary Gain compensation

Surround Back Speaker Position

i

Audio Delay Stellen Sie die Zeitverzgerung der Video- und Audiosignale ein. Audio Delay = 0 ms

!3 Setup Lock Stellen Sie hier ein, ob die Systemeinrichtungs-Einstellungen gesperrt werden sollen, so dass sie nicht gendert werden knnen, oder nicht.

Setup Lock = OFF

Hiermit wird der Ausgangspegel fr die Multi-Zonen 1 Ausgangsbuchsen eingestellt.

Fhren Sie diese Einstellung aus, um den Leistungsverstrker des hinteren Surroundkanals fr die Anwendung von Multi-Zone 2 einzustellen.

Multi Zone-1 Vol. Level

Power AMP Assignment

Surround back

o Auto Surround Mode

Einstellung der Automatik-Surround-Modus-Funktion. Auto Surround Mode = ON

!0 Digital Multi Ch In

Einstellung des digitalen Multikanaleingangs. DENON Link = OFF, Digital Ext. In = OFF

!2

Auto Tuner Presets

(Nur AVR-5800 )

UKW-Sender werden automatisch empfangen und im Speicher festgehalten.

A1 ~ A8 87,5/89,1/98,1/107,9/90,1/90,1/90,1/90,1 MHz

B1 ~ B8 520/600/1000/1400/1500/1710 kHz/90,1/90,1 MHz

C1 ~ C8 90,1 MHz

D1 ~ D8 90,1 MHz

E1 ~ E8 90,1 MHz

Dieses Upgrade bietet Ihnen zustzlich die folgenden Funktionen und technischen Daten:

10

DEUTSCH

Einstellung der berschneidungsfrequenz

1 Whlen Sie den Crossover frequency-Modus.

Stellen Sie die berschneidungsfrequenz entsprechend des verwendeten Lautsprechersystems ein. Whlen Sie im Systemsetup-Menbildschirm Speaker Configuration aus, drcken Sie anschlieend am

Joystick ENTER zwei- oder dreimal.

Whlen Sie die Frequenz.

2 Geben Sie die Einstellung ein. Es erscheint wieder das System-Einrichtungsmen.

Fhren Sie diese Einstellungen aus, wenn fr den Subwoofer bei den Lautsprecher-Konfigurations-Einstellungen Yes gewhlt worden ist. Hier wird nichts angezeigt, wenn No gewhlt worden ist.

Einstellung zur Benutzung eines THX Ultra2 kompatiblen Subwoofers

1 Whlen Sie THX Audio Setup auf dem Systemeinrichtungs-Menbildschirm und drcken Sie Joystick ENTER, um zum THX Audio Setup -Bild umzuschaiten.

3 Whlen Sie Yes, wenn Sie einen THX Ultra2 kompatiblen Subwoofer oder Subwoofer benutzen, dessen Frequenzgang 20 Hz berschreitet. Whlen Sie sonst No.

4 Drcken Sie auf dem Jogstick ENTER, um zum THX Audio-Einrichtungsbildschirm zurckzukehren.

Wenn Yes gewhlt ist Boundary Gain Compensation kann ausgewhlt und die Kompensation kann auf OFF gestellt werden.

Stellen Sie Boundary Gain Compensation auf ON. Dadurch wird eine Schaltung aktiviert, die die niedrigen Frequenzen von 55 Hz oder weniger schneidet. Whlen Sie entweder ON oder OFF - je nachdem, wie stark die Tiefen entsprechend Ihres persnlichen Geschmacks sein sollen.

Wenn in der Lautsprecher-Konfiguration zwei Lautsprecher eingestellt worden sind, mssen Sie die Entfernung der beiden Lautsprecher einstellen. Hier wird nichts angezeigt, wenn 1spkr ausgewhlt worden ist.

Diese Einstellung ist erforderlich, um den optimalen Effekt in den Modi THX Surround EX, THX Ultra2 Kino und THX Musik zu erzielen.Es ist empfehlenswert, die SBL/SBR-Lautsprecher so nahe wie mglich zueinander aufzustellen.

Einstellung der Position der hinteren Surround-Lautsprecher

1 Whlen Sie auf dem THX Audio- Einrichtungsbildschirm Surround Back Speaker Position und drcken Sie dann auf dem Jogstick ENTER.

2 Whlen Sie die Einstellungen entsprechend der Entferungen der beiden hinteren Surround-Lautsprecher.

3 Drcken Sie auf dem Jogstick ENTER, um zum THX Audio-Einrichtungsbildschirm zurckzukehren.

Crossover frequency (berschneidungsfrequenz)

Stellen Sie die Frequenz (Hz) ein, unterhalb derer der Bass-Sound jedes einzelnen Hauptsprechers vom Subwoofer oder von den Lautsprechern, die auf Large gestellt worden sind (wenn kein Subwoofer verwendet wird) (berschneidungsfrequenz) ausgegeben werden soll.

Bei Lautsprechern, die auf Small gestellt worden sind, wird ein Ton mit einer Frequenz unterhalb der berschneidungsfrequenz beschnitten, und der beschnittene Bass-Sound wird vom Subwoofer oder von den Lautsprechern, die auf Large gestellt worden sind, ausgegeben.

Dieser berschneidungsfrequenz-Betrieb wird gltig, wenn unter der Speaker Configuration Setting der Subwoofer auf Yes gestellt worden ist oder wenn die Lautsprecher auf Small gestellt worden sind.

FIXED THX: Stellen Sie diesen Punkt auf die fr THX veranschlagte berschneidungsfrequenz von 80 kHz.

VARIABLE 40, 60, 80, 100, 120 Hz: Stellen Sie diesen Punkt je nach Wunsch entsprechend der Bass-Wiedergabefhigkeit Ihrer Lautsprecher ein.

HINWEISE: Die berschneidungsfrequenz ist im Modus HOME THX CINEMA auf 80 kHz eingestellt. Wir empfehlen eine Verwendung mit der auf FIXED THX, eingestellten berschneidungsfrequenz, doch

je nach Lautsprecher kann die Einstellung auf eine andere Frequenz den Frequenzgang nahe der berschneidungsfrequenz verbessern.

2 Whlen Sie zunchst Boundary Gain Compensation und drchen Sie dann Joystick ENTER.

4 Whlen Sie Exit und drcken Sie dann auf dem Jogstick ENTER, um zum Systemeinrichtungs-Menbildschirm zurckzukehren.

11

DEUTSCH

Diese Funktion erlaubt Ihnen die Einstellung der Zeitverzgerung der Video- und Audiosignale und die Speicherung dieser Einstellungen fr die verschiedenen Eingangsquellen. Diese Einstellung wird whrend der Betrachtung einer DVD oder anderen Software durchgefhrt; also nicht an dieser Stelle. Ursprnglich wird dies nicht angezeigt, wenn keine digitalen Signale eingegeben werden. Eine Anleitung zur Durchfhrung der Einstellung finden Sie auf Seite 16.

Einstellen der Tonverzgerung

Einstellen des Automatik-Surround-Modus

Die Surroundmodi fr die nachfolgend gezeigten letzten drei Arten von Eingangssignalen werden im Speicher abgelegt und das Signal wird automatisch mit dem entsprechenden Surroundmodus wiedergegeben, wenn es das nchste Mal eingegeben wird. Beachten Sie, dass die Surroundmodus-Einstellung auch getrennt fr die verschiedenen Eingangsquellen gespeichert wird.

q Analoge und PCM2-Kanal-Signale w 2-Kanal-Signale von Dolby Digital, DTS oder andere Multikanal-Formate e Multikanal-Signale von Dolby Digital, DTS oder andere Multikanal-Formate

1 Whlen Sie auf dem Menbildschirm fr die Systemeinrichtung Auto Surround Mode und drcken Sie dann auf dem Jogstick ENTER.

2 Whlen Sie ON, wenn Sie den Automatik-Surround- Modus anwenden mchten und OFF, wenn Sie von dieser Funktion keinen Gebrauch machen wollen.

3

Diese Einstellung ist fr den digitalen externen Eingang bei Benutzung der Koaxialeingnge 1 bis 4.

Wenn Sie auf ON gestellt haben, werden die vier Buchsen (Koaxial 1 bis 4) der gewnschten Eingangsquelle als ein einzelner digitaler Multikanal-Eingang zugeordnet. Wenn Sie auf OFF gestellt haben, werden die vier Buchsen (Koaxial 1 bis 4) individuellen Eingangsquellen zugeordnet.

3 Geben Sie die Einstellung ein. Es erscheint wieder das System-Einrichtungsmen.

Einstellung fr digitalen externen Eingang (Digital Ext. In) :

Einstellen des digitalen Multikanal-Eingangs

1 Whlen Sie auf dem Menbildschirm fr die Systemeinrichtung Digital Multi Ch In und drcken Sie dann auf dem Jogstick ENTER.

Fhren Sie diese Einstellung aus, wenn Sie einen Denon DVD-Player ber die Denon-Verbindungsbuchse anschlieen wollen. Stellen Sie auf ON, wenn Sie diese Buchse benutzen mchten, oder whlen Sie OFF, wenn Sie sie nicht benutzen mchten. Wenn Sie die Einstellung ON gewhlt haben, mssen Sie auch den Wiedergabeeingang einstellen, wenn kein digitales Signal anliegt.

ANALOG: Der analoge Eingang der Eingangsquelle, die der Denon-Link zugeordnet ist wird wiedergegeben.

EXT.-1: Der EXT.IN-1-Eingang wird wiedergegeben. EXT.-2: Der EXT.IN-2-Eingang wird wiedergegeben.

DENON Link-Einstellung:

4 Geben Sie die Einstellung ein. Es erscheint wieder das System-Einrichtungsmen.

Die Systemeinrichtungs-Einstellungen knnen gesperrt werden, damit sie nicht so einfach gendert werden knnen.

Schtzen der Einstellungen

1 Whlen Sie auf dem Systemeinrichtungs- Menbildschirm Setup Lock und drcken Sie auf dem Jogstick ENTER, um zum Bildschirm fr die Einrichtungssperre umzuschalten.

2 Whlen Sie ON, um die Systemeinrichtungs-Einstellungen zu sperren.

3 Drcken Sie auf dem Jogstick ENTER, um die Einstellung zu finalisieren und um den Systemeinrichtungs-Modus zu verlassen.

Wenn die Systemeinrichtungs-Sperrfunktion aktiviert ist, knnen die nachfolgend aufgefhrten Einstellungen nicht gendert werden und bei der Bettigung von Tasten, die mit diesen Einstellungen in Verbindung stehen, wird Setup Lock angezeigt.

Systemeinrichtungs-Einstellungen Surround-Parameter-Einstellungen Klangsteuerungs-Einstellungen Kanalpegel-Einstellungen (einschlielich Teststne)

Drcken Sie zum Lsen der Sperre noch einmal die Systemeinrichtungstaste und lassen Sie den Bildschirm fr die Systemeinrichtungs-Sperre anzeigen. Whlen Sie dann OFF.

2 Whlen Sie fr die Einstellung Yes und drcken Sie ENTER.

Stellen Sie den hinteren Surround-Kanaleingang ein, wenn unter Digital Ext. In die Option ON ausgewhlt worden ist.

Wenn Sie den hinteren Surround-Kanal nicht verwenden mchten ..........NOT USED Wenn Sie den hinteren Surround-Kanal verwenden mchten fhren Sie die Einstellungen entsprechend den technischen Daten des angeschlossenen Players durch.

12

DEUTSCH

Wiedergeben von Modi fr verschiedene Tonquellen

Der AVR-5800/AVC-A1SE Upgrade ist mit vielen Surround-Modi ausgestattet. Wir empfehlen Ihnen die Anwendung der Surround-Modi wie nachfolgend beschrieben, um fr die jeweilige Signalquelle den maximalen Effekt zu erzielen.

Obwohl wir empfehlen, den Surround-Modus wie oben beschrieben auszuwhlen, knnen Sie sich natrlich auch fr andere Surround-Modi entscheiden.

In Dolby Surround aufgenommene 2-Kanal- Tonquellen

In Stereoton aufgenommene Tonquellen In Einkanalton aufgenommene Tonquellen

In Dolby Digital Surround EX aufgenommene Tonquellen

Maximale Leistung fr die Wiedergabe von Filmen auf dem AVR-5800/AVC-A1SE Upgrade.

Dieser Modus wurde fr die Wiedergabe von in Dolby Digital Surround EX aufgenommene Tonquellen optimiert.

Dolby Digital oder DTS Surround

THX SURROUND EX

DOLBY DIGITAL EX

DTS-ES DSCRT 6.1, MTRX 6.1

Effektiv fr in Dolby Surround aufgenommene 2-Kanal-Tonquellen oder fr die 7,1-Kanal-Wiedergabe mit 5,1-Kanal-Tonquellen.

WIDE SCREEN

Diese Modi eignen sich fr die Wiedergabe von 5.1-Kanalquellen und 7.1.-Kanlen. Whlen Sie den gewnschten Surroundmodus fr Film- und Musikquellen.

THX Ultra2 CINEMA* and THX MUSIC MODE*

Dieser Modus eignet sich optimal fr die Wiedergabe von 5,1-Kanal-Filmen. Fr in Dolby Surround aufgenommene Tonquellen ist dieser Modus genauso

kraftvoll wie fr 5,1-Kanal-Tonquellen.

HOME THX CINEMA (THX 5.1)

Dieser Modus eignet sich optimal fr die Wiedergabe von 5,1-Kanal-Filmen. Bei Dolby-Surround-Aufnahmen wird die Wiedergabe in Dolby Pro-Logic II

durchgefhrt.

DOLBY DIGITAL / DTS SURROUND / DTS 96/24

Durch Unterbrechung aller Videoschaltungen kann analoge Musik mit optimaler Qualitt wiedergegeben werden. (Die Video-Ausgnge sind nicht in Funktion.)

PURE DIRECT

Dieser Surroundmodus gibt von Dolby Laboratories entwickelte Stereoquellen in 5.1 Kanlen wieder.

Whlen Sie Ihrem Geschmack entsprechend einen der drei Wiedergabemodi.

DOLBY PROLOGIC II

Effektiv zum Erzielen einer reinen Wiedergabe. Wenn weder eine Klangregelung noch eine Verteilung der Niederfrequenzen

in Funktion der Lautsprecher-Konfiguration erforderlich ist, whlen Sie zum Erzielen bester Klangquelitt den DIRECT-Modus an.

DIRECT / STEREO

Whlen Sie diese Modi fr die 7,1-Kanal-Wiedergabe von in Stereo- oder Einkanalton aufgenommenen Tonquellen.

Die Effekte sind fr jeden einzelnen Surround-Modus unterschiedlich. Whlen Sie den fr die verwendete Tonquelle am geeignetesten Modus.

DENONS Original-Surround-Modi

5,1-Kanal- Tonquellen

In DTS-ES aufgenommene Tonquellen

Dies ist der optimale Modus fr die Wiedergabe von in DTS-ES aufgenommenen Tonquellen.

Wenn Sie diesen Modus bei der Wiedergabe von Filmen einstellen, ist der Klang natrlicher. Whlen Sie den Modus nach Belieben aus.

THX DSCRT 6.1, MTRX 6.1

ist ein 6,1-Kanal/7,1-Kanal-Surround-Modus.

Dies ist der Surround-Modus fr die von Digital Theater Systems entwickelte Wiedergabe von 6.1 oder 7.1-Kanal-Stereotonquellen.

Einer von zwei Wiedergabemodi MUSIC (fr Musikquellen) oder CINEMA (fr Filmquellen) kann entsprechend Ihres persnlichen Geschmacks ausgewhlt werden.

DTS NEO:6

HINWEIS: Fr die Benutzung der mit einem Sternchen (*) gekennzeichneten Surroundmodi sind zwei hintere Surround-Lautsprecher erforderlich.

10 SURROUND

[1] Wiedergabe von in Dolby Surround im Home THX Cinema Surround-Modus aufgenommenen Tonquellen

THX Surround EX / Home THX Cinema-Modus

Wenn die HOME THX CINEMA-Taste gedrckt ist, wird der Surround-Modus entsprechend des wiedergegebenen Signals wie folgt eingestellt:

q THX Surround EX (THX Ultra2 Cinema) w Home THX CINEMA e THX 5.1 r THX DSCRT 6.1, THX MTRX 6.1

Wenn bei der Wiedergabe einer DVD der HOME THX CINEMA-Modus eingestellt ist, mssen Sie die digitale Ausgangseinstellung des DVD-Players berprfen und eine Einstellung whlen, fr die Dolby Digital- und DTS- Bitstrme ausgegeben werden knnen (z.B. bit stream).

1 q Whlen Sie die Eingangsquelle an.

INPUT SELECTOR

(Hauptgert) (Fernbedienungsgert)

1-q

1-w

3

5, 7

6

4

1-w2

1-q 4

2 Whlen Sie den Home THX Cinema-Modus an. HOME

THX CINEMA

(Hauptgert) (Fernbedienungsgert)

3 Starten Sie die Wiedergabe einer mit markierten Programmquelle.

Einzelheiten zum Betrieb entnehmen Sie bitte den Betriebsanleitungen der entsprechenden Komponenten.

w Stellen Sie den Eingangsmodus auf AUTO.

INPUT MODE

(Hauptgert) (Fernbedienungsgert)

4 Adjust volume.

MASTER VOLUME

(Hauptgert) (Fernbedienungsgert)

5 Lassen Sie den Surround-Parameter-Bildschirm anzeigen und stellen Sie die Parameter entsprechend der Tonquelle ein.

(Fernbedienungsgert)

13

DEUTSCH

Surround-Parameter w Siehe fr Anleitungen hinsichtlich der Einstellung der Surround-Parameter Seite 12. MODE/SB CH OUT: Select the surround back channel playback method or surround mode.

THX Surround EX........Dolby Digital-Signale werden im THX Surround EX-Modus wiedergegeben. Ultra2 Cinema .............Die Signale werden im THX Ultra2 Cinema-Modus wiedergegeben. Music Mode................Die Signale werden im THX MusicMode-Modus wiedergegeben. NON MTRX.................Dieselben Signale wie die der Surround-Kanle werden von den hinteren Surround-

Kanlen ausgegeben. MTRX ON ...................Die Surroundkanal-Signale werden einer digitalen Matrixbearbeitung unterzogen

und von den hinteren Surround-Kanlen ausgegeben. SB OFF (OFF)..............Von den hinteren Surround-Kanlen wird kein Signal wiedergegeben. ES MTRX ....................Bei der Wiedergabe von DTS-Signalen werden die Signale der hinteren Surround-

Kanle einer digitalen Matrixbearbeitung fr die Wiedergabe unterzogen. ES DSCRT...................Wenn ein Signal, das die Quelle als eine diskrete 6.1-Kanalquelle identifiziert, in

den DTS-Signalen enthalten ist, werden die Signale der hinteren Surround- Lautsprecher wiedergegeben, die in der Quelle enthalten sind.

AFDM (Auto Flag Detect Mode): ON .......Diese Funktion steht nur bei der Benutzung von Software zur Verfgung, auf die ein spezielles

Identifikationssignal aufgenommen worden ist. Diese Software kommt demnchst in den Handel. Dies ist eine Funktion fr die automatische Wiedergabe im 6.1-Kanalmodus bei Anwendung der hinteren Surround-Lautsprecher, wenn die Software im THX Surround EX- oder DTS-ES-Modus aufgenommen worden ist. Die Funktion kann auch angewendet werden, wenn die Software ohne Verwendung der hinteren Surround-Lautsprecher im normalen 5.1-Kanalmodus aufgenommen wurde, wenn die Software nicht im THX Surround EX- oder DTS-ES-Modus aufgenommen worden ist.

OFF......Stellen Sie den OFF-Modus ein, um die 6.1-Kanalwiedergabe mit herkmmlichen 5.1- Kanalquellen oder mit Quellen auszufhren, auf denen das nachfolgend beschriebene Identifikationssignal nicht aufgenommen worden ist.

6 q Whlen Sie den Parameter.

(Fernbedienungsgert)

Drcken Sie die Taste SURR.PARA., um die Einstellung abzuschlieen.

(Fernbedienungsgert)

7

Surround-Parameter q

DECODER: Whlen Sie den Decoder aus, der bei der Wiedergabe von 2-Kanalquellen im Modus Home THX Cinema verwendet werden soll.

PL II C........Die Signale werden im Modus Dolby Pro Logic II Cinema decodiert, bevor die THX- Bearbeitung beginnt.

PL II E........Die Signale werden in der Emulation Dolby Pro Logic decodiert, bevor die THX-Bearbeitung beginnt.

NEO:6 C ....Die Signale werden im Modus NEO:6 Cinema decodiert, bevor die THX-Bearbeitung beginnt. MODE/SB CH OUT: Whlen Sie das Verfahren fr die Wiedergabe der hinteren Surround-Kanle oder den Surround-Modus.

NORMAL (ON)............Dies ist der empfohlene Wiedergabemodus fr die Anwendung des hinteren Surroundkanals, wenn DTS NEO:6 angewhlt ist.

NORMAL (OFF) ..........Die ist empfohlene Wiedergabemodus bei der Auswahl von Dolby Pro Logiv II. Der hintere Surrundkanal wird nicht wiedergegeben.

berprfung der Eingangssignale

Die Eingangssignale knnen berprft werden, indem die Taste ON SCREEN auf der Fernbedienung gedrckt wird.

SIGNAL: Zeigt die Art des Signals (DTS, DOLBY DIGITAL, PCM usw.) an.

fs: Zeigt die Art der Signal-Abtastfrequenz an. FORMAT: Zeigt die Kanalanzahl der Eingangssignals an.

Anzahl der vorderen Kanle/Anzahl der umgebenden Kanle/LFE an/aus Bei 2-Kanal-Signalquellen in Dolby Surround wird SURROUND angezeigt.

OFFSET: Zeigt den Dialognormalisierungs-Ausschaltwert an. FLAG: Zeigt das im Eingangssignal aufgenommene Spezial-

Identifikationssignal an. Wenn die Matrixbearbeitung am rckwrtigen Surroundkanal durchgefhrt wird, wird MATRIX angezeigt; wenn eine getrennte Bearbeitung durchgefhrt wird, wird DISCRETEangezeigt. Wird nicht angezeigt, wenn kein Identifikationssignal aufgenommen worden ist.

Zustzlich werden in der folgenden Reihenfolge Bildschirminformationen angezeigt, wenn die Taste OSD wiederholt gedrckt wird:

OSD-1 Eingangssignal OSD-2 Eingang/Ausgang OSD-3 Autom. Surround-Modus OSD-3 ~ 7 Gespeicherte Sender

HINWEIS: OSD-3: Dies wird angezeigt, wenn der autom. Surround-Modus auf ON und der Eingangsmodus

auf Auto gestellt wird. Dies wird nicht angezeigt, wenn der Eingangsmodus auf Analog oder EXT. IN-1,-2 gestellt wird.

OSD-3 ~ 7: Nur AVR-5800

(Fernbedienungsgert)

Anwhlen einer digitalen Eingangsquelle

Bei der Wiedergabe von Dolby Digital- Tonquellen leuchtet die Dolby Digital- Anzeige.

DIGITAL

Bei der Wiedergabe von DTS- Tonquellen leuchtet die DTS-Anzeige.

Das LED des Surround-Gegenkanals leuchtet bei der Wiedergabe im THX SURROUND EX-Modus grn.

SURROUND BACK CH

OUTPUT

[2] Wiedergabe im THX Surround EX/Home THX Cinema Surround-Modus fr in Dolby Digital oder DTS aufgenommene Tonquellen

1 Whlen Sie die Programmquelle an.

Fhren Sie den Schritt 1 im Abschnitt Dolby Digital-Modus und DTS-Surround aus.

2 Whlen Sie den Home THX Cinema-Modus an. HOME

THX CINEMA

(Hauptgert) (Fernbedienungsgert)

3 Starten Sie die Wiedergabe einer mit , markierten Programmquelle.

Einzelheiten zum Betrieb entnehmen Sie bitte den Betriebsanleitungen der entsprechenden Komponenten. Die Kanalstatus-Informationen whrend der Wiedergabe von Dolby Digital- und DTS-Tonquellen knnen mit Hilfe der sich am Hauptgert befindlichen STATUS-Taste berprft werden.

2

32 3

w Whlen Sie die Einstellung.

(Fernbedienungsgert)

14

DEUTSCH

1-w 2

1-q 3 3

1-q

1-w

2

2

4, 6

5

Dolby Digital-Modus (nur mit Digital-Eingang) und DTS-Surround

(nur mit Digital-Eingang)

Wiedergabe mit einem Digital-Eingang 1 Whlen Sie die Eingangsquelle an.

q Whlen Sie eine auf digital eingestellte Eingangsquelle (COAXIAL/OPTICAL)

INPUT SELECTOR

(Hauptgert) (Fernbedienungsgert)

w Stellen Sie den Eingangsmodus auf AUTO.

INPUT MODE

(Hauptgert) (Fernbedienungsgert)

2 Whlen Sie den Surround-Modus an. DOLBY

SURROUND DTS

SURROUND

(Hauptgert) (Fernbedienungsgert)

3 Starten Sie die Wiedergabe einer mit , gekennzeichneten Programmquelle.

4 Lassen Sie sich das Surround-Parameter-Men anzeigen.

(Fernbedienungsgert)

5 q Whlen Sie die verschiedenen Parameter aus.

(Fernbedienungsgert)

w Nehmen Sie die Parametereinstellungen vor.

(Fernbedienungsgert)

DIGITAL

Die DTS-Anzeige leuchtet bei der Wiedergabe von DTS-Quellen.Leuchtet

Leuchtet SIGNAL DETECT

Die Anzeige SIGNAL DETECT leuchtet, wenn Quellen wiedergegeben werden, auf die ein Spezial-Identifikationssignal aufgenommen worden ist.

Leuchtet

Die Dolby Digital-Anzeige leuchtet bei der Wiedergabe einer Dolby Digital-Quelle.

6 Drcken Sie die Taste SURR.PARA., um die Einstellung abzuschlieen.

(Fernbedienungsgert)

1 Whlen Sie die Funktion aus, an die die Komponente, die Sie wiedergeben mchten, angeschlossen ist.

Beispiel:

2 Whlen Sie den Dolby Surround Pro Logic II- Modus.

Dolby Surround Pro Logic II-Modus

INPUT SELECTOR

(Hauptgert) (Fernbedienungsgert)

3 Starten Sie die Wiedergabe einer mit gekennzeichneten Programmquelle. Einzelheiten zum Betrieb entnehmen Sie bitte den Betriebsanleitungen der entsprechenden

Komponenten.

leuchtet

(Hauptgert) (Fernbedienungsgert)

DOLBY SURROUND

Verwenden Sie die Tasten DOLBY SURROUND zur Auswahl des Modus DOLBY PRO LOGIC II.

Die Dolby Pro Logic-Anzeige leuchtet.

4, 5

1 2

21

4, 7

5, 6

4 Whlen Sie den Modus Surround-Parameter.

CINEMA / MUSIC

(Hauptgert) (Fernbedienungsgert)

5 Whlen Sie den optimalen Modus fr die Quelle.CINEMA / MUSIC

(Hauptgert) (Fernbedienungsgert)

DOLBY PL II CINEMA DOLBY PL II MUSIC DOLBY PL II EMULATION

15

DEUTSCH

6 q Whlen Sie die verschiedenen Surround-Parameter aus.

Einstellung DEFAULT

(Fernbedienungsgert) (Fernbedienungsgert)

Dolby Headphone

Der Dolby Headphone-modus ist eingestellt, wenn an die PHONES-Buchse bei eingestelltem DOLBY/DTS SURROUND-Modus Kopfhrer angeschlossen sind.

1 Wenn die SURR. PARA. Taste gedrckt ist, erscheint der Parameter- Auswahlbildschirm.

2(Fernbedienungsgert)

1, 3

Parameter

MODUS (MODE): DH1.............Referenzraum (kleiner Raum mit schwachem Widerhall) DH2.............Live-Raum (Raum mit etws strkerem Widerhall als DH1) DH3.............Groer Raum (grerer Raum als DH1; liefert ein Gefhl von Entfernung sowie Klangdiffusionseffekte) BYPASS.......Stereoklang.

DEKODER (DECODER): Whlen Sie diese Einstellung bei der Wiedergabe von analogen, PCM- oder anderen 2-Kanal-Quellen. Die Signale werden mit Hilfe der nachfolgend aufgefhrten Dekoder in Multikanalsignale umgewandelt und im Dolby Headphoner-Modus wiedergegeben. Dies wird im BUPASS-modus nicht angezeigt.

PL II C .........Dolby Pro Logic II Cinema-Modus PL II M ........Dolby Pro Logic II MusicMode-Modus NEO:6 C......DTS NEO:6 Kino-Modus NEO:6 M.....DTS NEO:6 Musik-Modus OFF .............Die Signale werden im Dolby Headphone-Modus wiedergegeben wie (2 Kanle).

Aufnahme Wenn der RECOUT-Modus auf SOURCE gestellt ist, knnen mit diesem Verstrker im Dolby-Kopfhrer- Modus kodierte Signale von den Aufnahme-Ausgangsbuchsen ausgegeben und auf einem anderen Rekorder aufgenommen werden. 1. Der Dolby Kopfhrer-Wiedergabemodus wird eingestellt, wenn Kopfhrer whrend der Wiedergabe im

DOLBY/DTS-Surroundmodus an die PHONES-Buchse angeschlossen werden. 2. Danach werden die im Dolby Kopfhrer-Modus kodierten Signale von den Aufnahmeausgangsanschlssen

(analog und digital) automatisch ausgegeben und knnen aufgenommen werden. 3. Whlen Sie die Parameter aus, stellen Sie den gewnschten Modus ein und machen Sie dann die Aufnahme.

HINWEIS: Trennen Sie whrend der Aufnahme die Kopfhrer nicht ab.

2 q Whlen Sie den Parameter.

(Fernbedienungsgert)

w Whlen Sie die Einstellung.

(Fernbedienungsgert)

3 Drcken Sie die Taste SURR.PARA., um die Einstellung abzuschlieen.

(Fernbedienungsgert)

HINWEIS: Beim Durchfhren der Parametereinstellungen kehrt die Anzeige einige Sekunden, nachdem die letzte

Taste (Hauptgert) gedrckt worden ist, zur regulren Displayanzeige zurck und die Einstellung wird abgeschlossen.

Surround-Parameter e

Pro Logic II-Modus: Der Cinema-Modus ist fr Stereo-Fernsehsendungen und alle in Dolby Surround kodierten Programme vorgesehen. Fr Autosound Music-Systeme (kein Bild) wird als Standard-Modus der Musik-Modus empfohlen. Dieser Modus kann bei A/V-Systemen gewhlt werden. Der Pro Logic Emulationsmodus bietet dieselbe robuste Surround-Bearbeitung wie das ursprngliche Pro Logic, sofern die Qualitt des Tonquelleninhaltes nicht optimal ist. Whlen Sie einen der Modi (Cinema, Music oder EML). Panorama-Regler: Dieser Modus dehnt das vordere Stereobild aus, um die Surround-Lautsprecher fr einen aufregenden wraparaound-Effekt mit Seitenwand-Vorstellung einzubeziehen. Whlen Sie OFF oder ON. Abmessungssteuerung: Hiermit wird das Klangfeld langsam entweder weiter nach vorn oder hinten verschoben. Der Regler kann in 7 Schritten von 0 bis 6 eingestellt werden. Mittelbreiten-Regler: mglicherweise nur vom Mittellautsprecher, von den linken/rechten Lautsprechern als Phantombild oder von allen drei Frontlautsprechern zu hren ist, um die Grade zu variieren. Der Regler kann in 8 Schritten von 0 bis 7 eingestellt werden.

Whlen Default Yes 0, um die Parameter auf die Standardeinstellung zu setzen.

(Fernbedienungsgert)

7 Drcken Sie die Taste SURR.PARA., um die Einstellung abzuschlieen.

(Fernbedienungsgert)

w Stellen Sie die Parameter- Einstellungen ein.

16

DEUTSCH

1-w

1-q 1-e

2, 7

1-q

1-w

1-e

3, 4,

5, 6

Einstellen der Tonverzgerung (Audio Delay)

1 q Whlen Sie die Eingangsquelle an.

INPUT SELECTOR

(Hauptgert) (Fernbedienungsgert)

w Stellen Sie den Eingangsmodus auf AUTO. INPUT MODE

(Hauptgert) (Fernbedienungsgert)

Beim Betrachten einer DVD- oder Videoquelle, erscheint das Bild auf dem Bildschirm in Bezug auf den Ton mglicherweise verzgert. Stellen Sie in einem solchen Fall die Tonverzgerung ein, um den Ton zu verzgern und mit dem Bild zu synchronisieren. Die Tonverzgerungs-Einstellung wird fr jede einzelne Eingangsquelle separat gespeichert.

e Whlen Sie Dolby/DTS Surround. DOLBY

SURROUND DTS

SURROUND

(Hauptgert) (Fernbedienungsgert)

r Geben Sie eine Programmquelle (DVD usw.) wieder.

2 Drcken Sie die SYSTEM SETUP-Taste (Systemeinrichtung) und lassen Sie das Systemseinrichtungs-Men anzeigen.

(Fernbedienungsgert)

3 Whlen Sie auf dem Menbildschirm fr die Systemeinrichtung Audio Delay.

(Fernbedienungsgert)

4 Drcken sie auf dem Jogstick ENTER, um zum Bildschirm fr die Tonverzgerung umzuschalten.

(Fernbedienungsgert)

5 Geben Sie die Verzgerungszeit ein. (0 ms 200 ms)

(Fernbedienungsgert)

Stellen Sie z.B. bei einer Filmquelle so ein, dass die Lippenbewegungen der Schauspieler mit dem Ton synchron sind.

6 Drcken Sie auf dem Jogstick ENTER, um zum Systemeinrichtungs-Men zurckzukehren.

7 Drcken Sie die Taste SYSTEM SETUP, um die Einstellung abzuschlieen.

HINWEIS: Die Tonverzgerungs-Einstellung wirkt sich bei der Wiedergabe im EXT. IN-Modus oder im analogen Eingangs-Direktmodus oder im Stereomodus nicht aus (nur wenn die berschneidungsfrequenz auf FIXED THX oder vom Lautsprecher auf Large gestellt ist).

2 Unterschiede bei den Bezeichnungen des Surround-Modus hngen von den

Eingangssignalen ab.

Eingangssignale

PURE DIRECT, DIRECT

STEREO

HOME THX CINEMA

DTS SURROUND

DTS NEO:6

DOLBY DIGITAL

DOLBY PRO LOGIC II

DSP SIMULATION

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS SURROUND

E E

E

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS 96/24

E E

E

C

C C

B THX DSCRT6.1

THX MTRX6.1

B DTS ES DSCRT6.1

DTS MTRX6.1

E E

E

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX SURROUND EX

THX Ultra2 Cinema

THX Music Mode

THX5.1

E

E DOLBY DIGITAL EX

DOLBY DIGITAL

E

C

ANALOG LINEAR PCM DTS (5.1 ch) DTS 96/24(5.1 ch) DTS (6.1 ch) D. D. (2 ch) D. D. (5.1 ch)

DTS DOLBY DIGITALSurround-Modus

C : Whlbar : Unterschiede bei der Bezeichnung des Surround-Modus hngen von der Einstellung der Surround-

Parameter von SB CH OUT ab. B : nterschiede bei der Bezeichnung des Surround-Modus hngen von den Eingangssignalen ab. E : Nicht whlbar

1. CENTER IMAGE (0,0 bis 0,5: Grundeinstellung 0,2) Der Mittenbild-Parameter wurde fr die Erweiterungseinstellung des Mittelkanals im DTS NEO:6 MUSIC- Modus hinzugefgt.

2. Subwoofer-Kanal OFF-Einstellung Der Subwoofer-Kanal kann jetzt in jedem Surround-Modus auf OFF gestellt werden. OFF wird eingestellt, wenn der Kanalpegel eine Stufe unter -12 dB eingestellt ist.

3. PURE DIRECT-Modus Die Einstellung wird jetzt gesichert.

4. Kanalpegel und Fader-Einstellung

Kanalwahl

Pegeleinstellung und Fader-Einstellung

2 Sonstige nderungen

Die digitale bertragung und Multikanal-Wiedergabe von DVD-Audiodiscs und anderen Multikanal-Quellen ist mglich, indem der AVR-5800/AVC-A1SE mit Hilfe des mit dem DVD-Player mitgelieferten Anschlusskabels an einen Denon DVD-Player angeschlossen wird, der mit einem Denon Link-Anschluss ausgestattet ist. Bei der Verwendung von Discs, auf denen spezielle Urheberrechtsmanahmen getroffen worden sind, werden die digitalen Signale mglicherweise jedoch nicht vom DVD-Player ausgegeben. Schlieen Sie in einem solchen Fall den analogen Multikanal-Ausgang des DVD-Player's fr die Wiedergabe an die EXT.IN-1- oder EXT.IN-2-Buchsen des AVR-5800/AVC-A1SEs an. Beziehen Sie sich auch auf die Bedienungsanleitung Ihres DVD-Players.

2 Wiedergabe mit Hilfe des Denon Link-Anschlusses

17

FRANCAIS

MODE DEMPLOI DE LA MISE A JOUR POUR

AVR-5800/AVC-A1SE

Nous vous remercions dutiliser le Service de mise jour pour AVR-5800/AVC-A1SE. Avant dutiliser lAVR-5800/AVC-A1SE aprs mise jour, veuillez vous rfrez aux instructions de ce document ainsi qu celles du Manuel dutilisation livr avec lappareil.

4 CARACTERISTIQUES

1. Certification de compatibilit avec les normes

Lucasfilm THX Ultra2

La norme Home THX est le rsultat de la collaboration unique entre la socit Lucasfilm Ltd. et les fabricants dquipements audio. La certification aux normes rigoureuses THX Ultra 2 permet de disposer du niveau de reproduction audio actuel le plus leve et de technologies propritaires de traitement de son surround en sortie conues pour amliorer les sensations procures par les pistes son surround du home cinma. En plus des amliorations apportes lamplificateur de puissance, qui respectent la norme THX Ultra prcdente, deux modes surround ont t ajouts: les modes THX Ultra2 Cinema et THX MusicMode.

2. Compatibilit du DTS 96/24 Le mise jour pour AVR-5800/AVC-A1SE est compatible avec des sources enregistres en DTS 96/24, un nouveau format de signal multi-voies dvelopp par Digital Theater Systems, Inc. Les sources en DTS 96/24 peuvent tre lues en mode multi-voies sur le mise jour pour AVR- 5800/AVC-A1SE avec une haute qualit de son de 96 kHz/24 bits ou de 88.2 kHz/24 bits.

3. Dcodeur Dolby Pro Logic II Le systme Dolby Pro Logic II est un nouveau format destin la reproduction de signaux audio multivoies disposant de nombreux avantages sur le systme Dolby Pro Logic conventionnel. Il peut servir dcoder non seulement des sources enregistres en Dolby Surround mais il peut aussi transformer des sources stro normales en cinq canaux (avant gauche/droit, centre et surround gauche/droit). De plus, de nombreux paramtres peuvent tre rgls selon le type de source et son contenu, de faon permettre un rglage du son de grande prcision.

4. Compatibilit avec les Dolby Headphone

Cest une technologie de son trois dimensions dveloppe conjointement par les socits Dolby Laboratories et Lake Technology Ltd. Australie qui permet d'obtenir un effet surround en utilisant un casque ordinaire.

5. DENON Link

Cette borne peut tre utilise pour connecter un lecteur DVD Denon et disposer d'une lecture canaux multiples numriques de grande qualit.

6. Digital Ext. In

Cest une fonction prvue pour futures expansions du systme qui utiliseront des connexions numriques canaux multiples.

7. Auto Surround Mode

Cette fonction mmorise le dernier mode surround utilis pour un signal dentre donn et rgle automatiquement ce mode surround quand ce mode de signal est nouveau reu en entre.

8. Audio Delay

Cest une fonction qui retarde le signal audio par rapport au signal vido. (de 0 200 ms)

9. Setup Lock

Cest une fonction qui permet le verrouillage du paramtrage systme, des paramtres de rglage surround, etc., de faon ce quils ne puissent tre modifis.

10. Delay Time

La valeur de rglage maximum a t porte de 4,5 6,0 m (de 15 20 pieds) et les pas de rglage, de 30 3 cm (de 1 0,1 pied).

7 INSTALLATION DU SYSTEME

Articles dinstallation de systme et valeurs par dfaut (rgles la livraison de lusine)

Installation de systme Valeurs par dfaut

q

w

e

t

y

!1

Speaker Configuration

Surround Speaker Setting

Subwoofer mode

Channel Level

Subwoofer Peak Limit Lev

Digital In Assignment

On Screen Display

Entrer la combinaison des enceintes de votre systme et leurs tailles correspondantes (SMALL pour enceintes normales, LARGE pour pleine taille, pleine gamme) pour automatiquement rgler la composition des signaux sortis par les enceintes et la rponse en frquence.

Utiliser cette fonction en cas dutilisation de combinaison denceintes dambiance multiples pour un son dambiance idal. Aprs avoir prrgl les combinaisons denceintes dambiance utiliser pour les diffrents modes dambiance, les enceintes dambiance sont automatiquement slectionnes en fonction du mode dambiance.

Ceci slectionne le subwoofer pour la lecture de signaux de profondes graves.

Ceci rgle le volume des signaux mis par les enceintes et le subwoofer pour les diffrents canaux afin dobtemir des effets optimaux.

Ce paramtre sert dtecter le niveau maximum des faibles signaux de graves mis par le canal de subwoofer pour le protger contre des dommages et viter la production de sons dforms dsagrables.

Ceci affecte les prises dentres numriques pour les diffrentes sources dentre.

This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated (from MONITOR 1 outputs only).

Mode dambiance

Enceinte dambiance

Source dentre

Entre numrique

Front Sp.

Small

Center Sp. Surround Sp.Sub Woofer

Small SmallYes

DOLBY/ DTS

SURROUND

THX/ THX 5.1

WIDE SCREEN

5CH/7CH STEREO

DSP SIMULATION

EXT. IN-1 EXT. IN-2

A A A A A A A

LFE THX

Front L & R Center Surround L & RSub Woofer

12 ft (3,6 m) 12 ft (3,6 m) 10 ft (3,0 m)12 ft (3,6 m)

Front L Center Front R Surround Back R

Surround L

Subwoofer

0 dB 0 dB 0 dB 0 dB 0 dB 0 dB

Peak Limitter = OFF

CD DVD VDP TV DBS/ SAT

VCR-1 VCR-2 TAPE-2

COAXIAL 1

COAXIAL 2

COAXIAL 3

OPTICAL 1

OPTICAL 2

OPTICAL 3

OPTICAL 4

OPTICAL 6

On Screen Display = ON

Surround Back Sp.

Small / 2spkrs

Delay Time Ce paramtre sert optimiser la synchronisation avec laquelle sont produits les signaux audio des enceintes et du subwoofer en fonction de la position dcoute.

SBL & SBR

10 ft (3,0 m)

r THX Audio Setup

Quand un subwoofer possdant une rponse en frquence compatible avec la norme THX Ultra2 est utilis.

THX Ultra2 Subwoofer = NO

Surround Back L

0 dB

Surround R

0 dB

TAPE-1

OPTICAL 5

VCR-3

COAXIAL 4

V. AUX

COAXIAL 5

Crossover Frequency

Rgler la frquence (Hz) un niveau infrieur celui du son grave mis par les diverses enceintes partir du subwoofer.

FIXED THX

u

Multi Zone Control

Variable

Lorsque deux enceintes surround arrire sont utilises, cette fonction rgle la distance des deux enceintes.

The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to o,3 m)

Boundary Gain compensation

Surround Back Speaker Position

i

Audio Delay Rglez le dlai de retard entre les signaux vido et audio. Audio Delay = 0 ms

!3 Setup Lock Utilisez cette fonction pour activez ou dsactiver le verrouillage du paramtrage des rglages systme.

Setup Lock = OFF

Cette fonction rgle le niveau de sortie des jacks de sortie multi-zones 1.

Effectuez ce rglage pour commuter l'amplificateur de puissance du canal surround arrire pour une utilisation multi- zones 2.

Multi Zone-1 Vol. Level

Power AMP Assignment

Surround back

o Auto Surround Mode

Rglage de la fonction du mode Auto surround. Auto Surround Mode = ON

!0 Digital Multi Ch In

Rglage d'entres numriques multicanaux. DENON Link = OFF, Digital Ext. In = OFF

!2

Auto Tuner Presets

(AVR-5800 uniquement)

Les stations en FM sont automatiquement captes et sauvegardes dans la mmoire.

A1 ~ A8 87,5/89,1/98,1/107,9/90,1/90,1/90,1/90,1 MHz

B1 ~ B8 520/600/1000/1400/1500/1710 kHz/90,1/90,1 MHz

C1 ~ C8 90,1 MHz

D1 ~ D8 90,1 MHz

E1 ~ E8 90,1 MHz

Cette mise jour ajoute les fonctions et caractristiques suivantes:

18

FRANCAIS

Rglage de la frquence de croisement

1 Slectionner le mode Crossover frequency (frquence de croisement).

Rgler la frquence de croisement en fonction du systme d'enceintes utilis. Slectionnez Speaker Configuration dans lcran de menu de rglage du systme, puis appuyer sur la

manette ENTER deux ou trois fois.

Slectionner la frquence.

2 Entrer le rglage. Le menu dinstallation de systme rapparat.

Effectuez ces rglages lorsque Yes est slectionn pour les rglages de configuration des enceintes. Rien ne saffiche lorsque No est slectionn.

Rglages pour lutilisation dun subwoofer compatible THX Ultra2

1 Slectionnez THX Audio Setup lcran System Setup Menu et appuyer sur la manette ENTER pour commuter lcren THX Audio Setup.

3 Lorsqu'un subwoofer compatible THX Ultra2 ou avec rponse en frquence allant jusqu' 20 Hz est utilis, slectionnez Yes. Sinon, slectionnez No.

4 Appuyer sur le levier de slection ENTER pour retourner lcran de paramtrage THX Audio Setup.

Lorsque Yes est slectionn: Boundary Gain Compensation (Compensation de gain en limites) peut tre slectionn et la compensation rgle sur OFF.

Si le son des graves semble trop fort: Rglez Boundary Gain Compensation sur ON. Cela active un circuit qui coupe les basses frquences gales ou infrieures 55 Hz. Slectionnez ON ou OFF selon votre prfrence pour la puissance des graves.

Lorsque deux enceintes surround arrire ont t ajoutes aux rglages de configuration des enceintes, cette fonction sutilise pour rgler leur distance. Rien ne saffiche lorsque le paramtre 1spkr (1 enceinte) est slectionn.

Ce rglage est ncessaire pour obtenir leffet optimal en modes THX Surround EX, THX Ultra2 Cinema et THX MusicMode. Il est recommand que les enceintes surround AR G et D soient places le plus prs possible lune de lautre.

Rglages de la position des enceintes surround arrire

1 Slectionnez Surround Back Speaker Position (Position des enceintes surround AR) lcran de paramtrage THX Audio et appuyez ensuite sur le levier de slection ENTER.

2 Slectionnez les rglages selon les distances des deux enceintes surround arrire.

3 Appuyez sur le levier de slection ENTER pour retourner lcran de paramtrage THX Audio Setup.

Crossover frequency (Frquence de croisement)

Rgler la frquence (Hz) en-dessous de laquelle le son grave de chaque enceinte principale doit tre mis par le subwoofer ou par les enceintes rgles sur Large (Grande) (lorsqu'un subwoofer n'est pas utilis) (frquence de croisement).

Pour les enceintes rgles sur Small (Petite), le son de frquence infrieure la frquence de croisement est coup et la place, le son grave est mis par le subwoofer ou les enceintes rgles sur Large (Grande).

Ce mode de frquence de croisement est valide lorsque Subwoofer est rgl sur Yes (Oui) dans le peaker Configuration Settingou lorsque les enceintes sont rgles sur Small (Petite).

FIXED THX: Rgler sur la frquence de croisement THX nominale de 80 Hz.

VARIABLE 40, 60, 80, 100, 120 Hz: Rgler souhait selon la capacit de lecture des graves du systme d'enceintes'.

REMARQUES: La frquence de croisement est rgle 80 Hz en mode cinma domestique HOME THX CINEMA. Nous recommandons une utilisation avec la frquence de croisement rgle sur FIXED THX (THX fixe),

mais selon le systme d'enceintes, le rglage sur une frquence diffrente peut amliorer la rponse en frquence proche de celle de croisement.

2 Slectionner Boundary Gain Compensation, puis appuyer sur la manette ENTER.

4 Slectionnez Exit et appuyez ensuite sur le levier de slection ENTER pour retourner l'cran de menu de paramtrage du systme.

19

FRANCAIS

Cette fonction vous permet de rgler la dure du dlai entre les signaux vido et audio et denregistrer les rglages pour les diffrentes sources dentre. Le rglage seffectue en regardant un DVD ou tout autre programme, donc il ne seffectue pas ce stade. Par dfaut, ce rglage ne saffiche pas lorsque aucun signal numrique nest prsent en entre. Pour les instructions concernant ce rglage, veuillez vous rfrer la page 24.

Rglage du dlai audio

Rglage du mode Auto Surround

Le dernier mode surround utilis pour les trois types de signal dentre illustrs ci-dessous est mmoris et activ automatiquement ds que le signal correspondant est prsent en entre. Veuillez noter que le rglage du mode surround est aussi enregistr sparment pour chaque source dentre.

q Signaux analogiques et de canal PCM2 w Signaux 2 canaux Dolby Digital, DTS ou autres format multicanaux e Signaux multicanaux Dolby Digital, DTS ou d'autres format multicanaux

1 Slectionnez Auto Surround Mode lcran de menu de paramtrage systme et appuyez ensuite sur le levier de slection ENTER.

2 Slectionnez ON si vous souhaitez utiliser le mode Auto surround, OFF si vous ne souhaitez pas lutiliser.

3

Ce rglage seffectue pour lentre Digital Ext. In qui utilisent les entres coaxiales 1 4.

Lorsque ON est choisi pour ce rglage, les quatre bornes (Coaxiales de 1 4) sont attribues la source dentre souhaite comme entre numrique multicanaux unique. Lorsque OFF est choisi pour ce rglage, les quatre bornes (Coaxiales de 1 4) sont attribues aux sources dentre individuelles.

3 Entrer le rglage. Le menu dinstallation de systme rapparat.

Rglage Digital Ext. In :

Rglage du mode Digital Multi CH In

1 Slectionnez Digital Multi Ch In lcran de menu de paramtrage systme et appuyez ensuite sur le levier de slection ENTER.

Effectuez ce rglage pour connecter un lecteur DVD Denon qui utilise la borne DENON Link. Slectionnez ON si vous souhaitez utiliser cette borne, OFF si vous ne souhaitez pas lutiliser. Lorsque ON est choisi pour ce rglage, celui-ci rgle aussi lentre de lecture quand aucun signal numrique nest prsent.

ANALOG: Lentre analogique de la source dentre attribue la connexion DENON Link est joue

EXT.IN-1: Lentre EXT.IN-1 est joue. EXT.IN-2: Lentre EXT.IN-2 est joue.

Rglage du raccordement DENON Link :

4 Entrer le rglage. Le menu dinstallation de systme rapparat.

Le paramtrage du systme peut tre verrouill de faon ce quil ne puisse tre modifi facilement.

Protection des rglages

1 Slectionnez Setup Lock lcran de menu de paramtrage systme et appuyer sur le levier de slection ENTER pour passer lcran de verrouillage du paramtrage.

2 Slectionnez ON pour verrouiller le paramtrage du systme.

3 Appuyez sur le levier de slection ENTER pour terminer le rglage et quitter le mode de paramtrage systme.

Lorsque la fonction de verrouillage du paramtrage systme est active, les rglages numrs ci-dessous ne peuvent tre modifis et Setup Locked (Paramtrage verrouill) saffiche lorsque les touches concernes sont sollicites.

Paramtrage systme Rglages des paramtres surround Rglages des commandes de tonalit Rglages de niveau de canal (y compris les tonalits de test)

Pour dverrouiller le paramtrage systme, pressez nouveau sur la touche System Setup pour afficher l'cran de verrouillage du paramtrage Setup Lock et slectionnez ensuite OFF.

2 Pour rgler, slectionnez Yes et appuyez sur ENTER.

Lors de la slection sur ON pendant la rglage de Digitl Ext. In, rglez lentre du canal surround arrire.

Si vous ne voulez pas utiliser le canal surround arrire ......NOT USED Si vous voulez utiliser le canal surround arrire, rglez-le selon les caractristiques du lecteur connect.

20

FRANCAIS

Modes de lectures pour sources diffrentes

La mise jour pour AVR-5800/AVC-A1SE est quip de plusieurs modes dambiance. Nous vous recommandons dutiliser les modes dambiance daprs les indications ci-aprs pour obtenir le meilleur effet pour chacun des diffrents types de signaux de source.

Il est quant mme possible dutiliser un mode autre que celui recommand.

2 canaux sources enregistres en Dolby Surround

Sources enregistres en stro

Sources enregistres en monaural

Sources enregistres en

Dolby Digital Surround EX Performance maximale pour la lecture de films sur lmise jour pour AVR-5800/AVC-A1SE.

Ce mode est optimis pour la lecture de sources enregistres en Dolby Digital Surround EX.

Dolby Digital ou DTS Surround

THX SURROUND EX

DOLBY DIGITAL EX

DTS-ES DSCRT 6.1, MTRX 6.1

Efficace pour les sources 2 canaux enregistres en Dolby Surround ou en lecture 7.1 canaux avec des sources en 5.1 canaux.

WIDE SCREEN (cran large)

Ces modes conviennent la lecture de sources 5.1 canaux en 7.1 canaux. Slectionnez le mode surround souhait pour les sources de lecture de film et de musique.

THX Ultra2 CINEMA* et THX MUSIC MODE*

Ce mode est optimis pour la lecture de film en 5.1 canaux. Pour les sources enregistres en Dolby Surround, ce mode procure aussi la

mme puissance quavec les sources 5.1 canaux.

HOME THX CINEMA (THX 5.1)

Ce mode est optimis pour la lecture de musique en 5.1 canaux. Pour les sources enregistres en Dolby Surround, le mode de lecture est

automatiquement rgl sur Dolby Pro Logic II.

DOLBY DIGITAL / DTS SURROUND / DTS 96/24

En suspendant tous les circuits vido, la lecture de musique entre analogique peut tre effectue avec une qualit optimale. (Les sorties vido ne fonctionnent pas.)

PURE DIRECT

Ce mode surround joue les sources stro 5.1 canaux dveloppes par les laboratoires Dolby.

Slectionnez un des trois modes de lecture selon votre prfrence.

DOLBY PROLOGIC II

Efficace en lecture pure. Si aucune correction de tonalit ou de distribution de basses frquences en

fonction de la configuration des enceintes nest ncessaire, slectionnez le mode DIRECT pour obtenir la meilleure qualit de son.

DIRECT / STEREO

Slectionnez ces options pour la lecture 7.1 canaux avec des sources enregistres en stro ou en monaural.

Les effets sont diffrents pour chacun des modes d'ambiance. Slectionnez le mode le plus appropri par rapport la source.

Modes d'ambiance originaux de DENON

Sources 5.1 canaux

Sources enregistres en DTS-ES Mode optimum pour la lecture de sources enregistres en DTS-ES.

Lors de la reproduction de films, le fait de rgler ce mode procure parfois un son plus naturel. Slectionner le mode votre convenance.

THX DSCRT 6.1, MTRX 6.1

est un mode d'ambiance 6.1 canaux/7.1 canaux.

Cest un mode dambiance pour la lecture de sources stro 6.1 ou 7.1 canaux mis au point par des systmes de cinma domicile.

Un des deux modes de lecture, MUSIC (pour les sources musicales); ou CINEMA (pour les sources de films) peut tre slectionn selon vos prfrences.

DTS NEO:6

REMARQUE: Les modes Surround reprs par un astrisque (*) ncessite lutilisation de deux enceintes surround arrire.

10 AMBIANCE

[1] Reproduction de sources enregistre en Dolby Surround dans le mode dambiance Home THX Cinema

Mode THX Surround EX / Home THX Cinema

Lorsque la touche HOME THX CINEMA est enfonce, le mode dambiance est rgl comme suit selon le signal lu:

q THX Surround EX (THX Ultra2 Cinema) w Home THX CINEMA e THX 5.1 r THX DSCRT 6.1, THX MTRX 6.1

Lorsque le mode HOME THX CINEMA est rgl lors de la lecture dun DVD, vrifier le rglage de sortie numrique du lecteur de DVD et modifier le rglage pour lequel les signaux Dolby Digital ou bit stream DTS peuvent tre envoys (bit stream par exemple).

1 q Slectionner la source dentre.

INPUT SELECTOR

(Unit principale) (Unit de tlcommande)

1-q

1-w

3

5, 7

6

4

1-w2

1-q 4

2 Slectionner le mode Home THX Cinema. HOME

THX CINEMA

(Unit principale) (Unit de tlcommande)

3 Reproduire une source programme avec la marque .

Pour les instructions dutilisation, se reporter aux manuels des composants respectifs.

w Rgler le mode dente AUTO. INPUT MODE

(Unit principale) (Unit de tlcommande)

4 Rgler le volume.

MASTER VOLUME

(Unit principale) (Unit de tlcommande)

5 Affichez lcran de paramtrage surround et rglez les paramtres en fonction de la source.

(Unit de tlcommande)

21

FRANCAIS

Paramtres dambiance w Pour plus dinstructions sur le rglage des paramtres surround, veuillez vous reporter la page 20. MODE/SB CH OUT: Slectionnez la mthode de lecture du canal surround arrire ou le mode surround souhait.

THX Surround EX........Les signaux Dolby Digital sont jous en mode THX Surround EX. Ultra2 Cinema .............Les signaux sont jous en mode THX Ultra2 Cinma. Music Mode................Les signaux sont jous en mode THX MusicMode. NON MTRX.................Les mme signaux que ceux des canaux surround sont mis par les canaux

surround arrire. MTRX ON ...................Les signaux de canaux surround sont soumis un traitement matriciel numrique

et mis par les canaux surround arrire. SB OFF (OFF)..............Aucun signal nest jou par les canaux surround arrire. ES MTRX ....................Lors de la lecture de signaux DTS, les signaux de canaux surround arrire sont

soumis un traitement matriciel numrique pour la lecture. ES DSCRT...................Lorsquun signal identifie la source comme tant une source spare 6.1 canaux

incluse dans les signaux DTS, les signaux incorpors dans la source sont aussi jous.

AFDM (Auto Flag Detect Mode (Mode de dtection automatique d'indicateur)) : ON .......Cette fonction fonctionne uniquement avec les programmes comportant un signal didentification

spcial. Ce type de programme sera prochainement disponible sur le march. Cest une fonction pour la lecture automatique en mode 6.1 canaux qui utilise les enceintes surround arrire si le programme a t enregistr en mode THX Surround EX, DTS-ES ou en mode 5.1 canaux normal sans utilisation des enceintes surround arrire lorsque le programme nest pas enregistr en THX Surround EX ou DTS-ES.

OFF......Rglez le mode sur OFF pour effectuer une lecture en 6.1 canaux avec des sources conventionnelles 5.1 canaux ou sur lesquelles le signal d'identification dcrit ci-dessous na pas t enregistr.

6 q Slectionnez le paramtre.

(Unit de tlcommande)

w Slectionnez le rglage.

(Unit de tlcommande)

7

Paramtres dambiance q

DECODER: Slectionnez le dcodeur utiliser pour la lecture de sources 2 canaux en mode Home THX Cinema (Cinma domestique THX).

PL II C........Les signaux sont dcods en mode Cinma Dolby Pro Logic II avant de subir le traitement THX.

PL II E........Les signaux sont dcods en mode Emulation Dolby Pro Logic II avant de subir le traitement THX.

NEO:6 C ....Les signaux sont dcods en mode Cinma NEO:6 avant de subir le traitement THX. MODE/SB CH OUT: Slectionnez la mthode de lecture du canal surround arrire ou le mode surround souhait.

NORMAL (ON)............Cest le mode lecture recommand pour lutilisation du canal surround arrire lorsque DTS NEO:6 est slectionn.

NORMAL (OFF) ..........Ceci est le mode de lecture recommand si Dolby Pro Logic II est slecionn. Le canal surround arrire nest pas lu.

Vrification du signal d'entre

Le signal d'entre peut tre vrifi en appuyant sur la touche ON SCREEN de la tlcommande.

SIGNAL: Affiche le type de signal (DTS, DOLBY DIGITAL, PCM, etc.).

fs: Affiche la frquence d'chantillonage du signal. FORMAT: Affiche le nombre de voies du signal d'entre.

Numro de voies avant/Numro de voies surround/LFE marche/arrt SURROUND est affich pour les sources 2-voies enregistres en Dolby Surround.

OFFSET: Affiche la valeur de dcalage de normalisation de dialogue. FLAG: Affiche le signal d'identifiaction spcifique enregistr dans le

signal d'entre. MATRIX s'affiche lorsque le processus matrix est effectu sur le canal surround arrire, DISCRETE s'aafiche lorsque le processus numrique est effectu. N'est pas affich lorsqu'aucun signal d'identification n'est affich.

De plus, des informations sont affiches l'cran dans l'ordre suivant lorsque la touche ON SCREEN est active plusieurs reprises:

OSD-1 Signal d'entre OSD-2 Entre/Sortie OSD-3 Mode Auto Surround OSD-3 ~ 7 Stations prrgles du tuner

REMARQUE: OSD-3: Ceci saffiche lorsque le mode auto surround est rgl sur ON et que le mode

dentre est rgl sur Auto. Ce message ne saffiche pas si le mode dentre est rgl sur Analog ou sur EXT. IN-1,-2.

OSD-3 ~ 7: AVR-5800 uniquement.

(Unit de tlcommande)

Slection dune source dentre numrique

Lindicateur Dolby Digital sallume pendant la lecture de sources Dolby Digital.

DIGITAL

Lors de la lecture de sources DTS, lindicateur DTS sallume.

Le tmoin lumineux dambiance arrire sallume en vert lors de la lecture en mode THX SURROUND EX.

SURROUND BACK CH

OUTPUT

[2] Pour effectuer une lecture en mode THX Surround EX/Home THX Cinema pour des sources enregistres en Dolby Digital ou DTS.

1 Slectionner la source programme.

Effectuer ltape 1 sous Mode Dolby Digital et ambiance DTS.

2 Slectionner le mode Home THX Cinema. HOME

THX CINEMA

(Unit principale) (Unit de tlcommande)

3 Reproduire une source programme avec la marque .ou .

Pour les instructions dutilisation, se reporter aux manuels des composants respectifs. Linformation sur ltat du canal pendant la lecture de sources Dolby Digital ou DTS peut tre vrifie laide de la touche STATUS de lunit principale.

2

32 3

Appuyer sur la touche SURR. PARA. pour terminer le rglage.

(Unit de tlcommande)

22

FRANCAIS

1-w 2

1-q 3 3

1-q

1-w

2

2

4, 6

5

Mode Dolby Digital (uniquement avec entre numrique) et ambiance DTS

(uniquement avec entre numrique)

Reproduire avec une entre numrique 1 Slectionner la source dentre.

q Slectionner une source dentre rgle numrique (COAXIAL/ OPTICAL).

INPUT SELECTOR

(Unit principale) (Unit de tlcommande)

w Rgler le mode dente AUTO. INPUT MODE

(Unit principale) (Unit de tlcommande)

2 Slectionner le mode dambiance. DOLBY

SURROUND DTS

SURROUND

(Unit principale) (Unit de tlcommande)

3 Reproduire une source programme avec la marque .ou .

4 Afficher le menu de paramtre dambiance.

(Unit de tlcommande)

5 q Slectionner les divers paramtres.

(Unit de tlcommande)

w Ajuster le paramtrage.

(Unit de tlcommande)

DIGITAL

Le tmoin DTS sallume en cas de reproduction de sources DTS.Sallume

Sallume SIGNAL DETECT

Lindicateur SIGNAL DETECT sallume lors de la lecture de sources sur lesquelles un signal didentification spcial est enregistr

Sallume

Le tmoin Dolby Digital sallume en cas de reproduction de sources Dolby Digital.

6 Appuyer sur la touche SURR. PARA. pour terminer le rglage.

(Unit de tlcommande)

5 Slectionner le meilleur mode pour la souce.

CINEMA / MUSIC

(Unit principale) (Unit de tlcommande)

DOLBY PL II CINEMA DOLBY PL II MUSIC DOLBY PL II EMULATION

1 Slectionner la fonction se rapportant au composant que vous dsirez couter.

EX:

2 Slectionner le mode Dolby Surround Pro Logic II.

Mode Dolby Surround Pro Logic II

INPUT SELECTOR

(Unit principale) (Unit de tlcommande)

3 Reproduire une source programme avec la marque . Pour les instructions dutilisation, se reporter aux manuels des composants respectifs.

Sallume

(Unit principale) (Unit de tlcommande)

DOLBY SURROUND

Slectionner le mode DOLBY PRO LOGIC II en utilisant les touches DOLBY SURROUND.

Le tmoin Dolby Pro Logic sallume.

4, 5

1 2

21

4, 7

5, 6

4 Slectionner le mode de paramtrage d'ambiance sonore.

CINEMA / MUSIC

(Unit principale) (Unit de tlcommande)

FRANCAIS

23

6 q Slectionnez les diffrents paramtres surround.

Rglage DEFAULT

(Unit de tlcommande) (Unit de tlcommande)

Dolby Headphone

Le mode Dolby Headphone est rgl lorsqu'un casque est connect au jack PHONES en mode DOLBY/DTS SURROUND.

1 Lorsque la touche SURR. PARA. est presse, lcran de slection de paramtre apparat.

2(Unit de tlcommande)

1, 3

Paramtres

MODE: DH1.............Reference room (petite pice avec faibles rverbrations) DH2.............Live room (pice avec rverbrations lgrement plus prononces que DH1) DH3.............Large room (pice plus grande que DH1, cette fonction offre des effets de sensation de

distance et de diffusion de sons) BYPASS.......Son stro

DECODER: Slectionnez cette option pour la lecture de sources analogiques, PCM ou autres sources 2 canaux. Les signaux sont convertis en signaux multicanaux en utilisant les dcodeurs illustrs ci-dessous et jous en mode Dolby Headphone. Ceci ne saffiche pas en mode BYPASS.

PL II C .........Mode Dolby Pro Logic II Cinema PL II M ........Mode Dolby Pro Logic II MusicMode NEO:6 C......Mode DTS NEO:6 Cinema NEO:6 M.....Mode DTS NEO:6 Music OFF .............Les signaux sont jous tels quels en mode Dolby Headphone ( 2 canaux).

Enregistrement Lorsque le mode RECOUT est rgl sur SOURCE, avec cet amplificateur, des signaux cods en mode Casque Dolby peuvent tre gnrs par les bornes de sortie d'enregistrement et enregistrs sur un autre enregistreur. 1. Le mode de lecture des casques Dolby est slectionn lorsque les couteurs sont connects la prise

PHONES pendant la lecture en mode surround DOLBY/DTS. 2. Dans ce cas, les signaux cods en mode de casques Dolby sont automatiquement envoys par les bornes

de sortie d'enregistrement (analogiques et numriques) et peuvent tre enregistrs. 3. Slectionner les paramtres puis le mode souhait et procder l'enregistrement.

REMARQUE: Ne pas dbrancher les couteurs pendant l'enregistrement.

2 q Slectionnez le paramtre.

(Unit de tlcommande)

w Slectionnez le rglage.

(Unit de tlcommande)

3 Appuyer sur la touche SURR. PARA. pour terminer le rglage.

(Unit de tlcommande)

REMARQUE: Pendant le rglage des paramtres, laffichage va revenir son tat dorigine plusieurs secondes aprs que

le dernier bouton (de lunit principale) ait t enfonc, ce qui terminera le rglage.

Paramtres dambiance e

Mode Pro Logic II: Le mode Cinma peut tre utilis pour les missions de tlvision en stro et tous les programmes enregistrs en Dolby Surround. Le mode Music est recommand comme mode standard pour les systmes musicaux son automatique (pas de vido) et optionnel pour le systme A/V. Le mode Pro Logic Emulation offre le mme procd de traitement du signal que celui servant au Pro Logic original si le contenu de la source nest pas de bonne qualit. Slectionner un des modes (Cinema, Music ou EML). Commande de Panorama: Ce mode tend limage stro frontale pour inclure les enceintes dambiance ou un effet wraparound excitant avec une exposition dimage latrale. Slectionner OFF ou ON. Commande de dimension: Cette commande ajuste progressivement le champ sonore vers lavant ou larrire. La commande peut tre rgle en 7 tapes de 0 6. Commande de largeur centrale: Cette commande ajuste limage centrale de sorte quelle puisse tre entendue uniquement de lenceinte centrale; uniquement des enceintes gauche/droite comme une image fantme ou des trois enceintes frontales pour varier les degrs denregistrement. La commande peut tre rgle en 8 tapes de 0 7.

w Ajustez le rglage des paramtres.

Slectionnez Default Yes 0 puis des paramtres rgls par dfaut.

(Unit de tlcommande)

7 Appuyer sur la touche SURR. PARA. pour terminer le rglage.

(Unit de tlcommande)

Le transfert numrique et la lecture multi-canaux de disques DVD audio et dautres sources multi-canaux sont possibles si lon connecte le AVR-5800/AVC-A1SE un lecteur de DVD Denon quip dun connecteur de liaison Denon en utilisant le cble de connexion fourni avec le lecteur de DVD. Cependant, avec des disques sur lesquels des mesures de protection des droits dauteurs spciales ont t prises, il se peut que les signaux numriques ne soient pas gnrs par le lecteur de DVD. Dans ce cas, connectez la sortie analogique multi-canaux du lecteur DVD aux bornes EXT.IN-1 ou EXT.IN-2 du AVR- 5800/AVC-A1SE pour la lecture. Rfrez-vous galement aux instructions dutilisation de votre lecteur de DVD.

24

FRANCAIS

1-w

1-q 1-e

2, 7

1-q

1-w

1-e

3, 4,

5, 6

Rglage du dlai audio (Audio Delay)

1 q Slectionner la source dentre.

INPUT SELECTOR

(Unit principale) (Unit de tlcommande)

w Rgler le mode dente AUTO. INPUT MODE

(Unit principale) (Unit de tlcommande)

Lors de la lecture dun DVD ou de tout autre source vido, limage sur le moniteur peut sembler en retard par rapport au son. Dans ce cas, rglez le dlai audio pour retarder le son et le synchroniser avec limage. Le rglage du dlai audio est enregistr sparment pour chaque source dentre.

e Slectionnez Dolby/DTS Surround. DOLBY

SURROUND DTS

SURROUND

(Unit principale) (Unit de tlcommande)

r Lancez la lecture dune source de programme (DVD, etc.).

2 Pressez la touche SYSTEM SETUP et affichez lcran de menu de paramtrage du systme System Setup Menu.

(Unit de tlcommande)

3 Slectionnez Audio Delay lcran de menu de paramtrage du systme.

(Unit de tlcommande)

4 Appuyer sur le levier de slection ENTER pour passer lcran de rglage du dlai automatique Audio Delay.

(Unit de tlcommande)

5 Rglez la dure du dlai (de 0 200 ms).

(Unit de tlcommande)

Pour une source comme un film par exemple, effectuez ce rglage pour que les mouvements de lvres des acteurs soit synchronis avec le son.

6 Appuyer sur le levier de slection ENTER pour retourner l'cran de paramtrage du systme.

7 Appuyer sur la touche SYSTEM SETUP pour terminer le rglage.

REMARQUE: Le rglage du dlai audio nest pas utilis pour la lecture en modes EXT. IN, dentre analogique directe ou stro (uniquement lorsque la frquence de croisement est rgle sur FIXED THX (THX fixe) ou les enceintes sur Large).

2 Les diffrences entre noms de mode dambiance dpendent des signaux d'entre

Signaux d'entre

PURE DIRECT, DIRECT

STEREO

HOME THX CINEMA

DTS SURROUND

DTS NEO:6

DOLBY DIGITAL

DOLBY PRO LOGIC II

DSP SIMULATION

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS SURROUND

E E

E

C

C C

THX MTRX6.1

THX Ultra2 Cinema

THX Music Mode

THX5.1

DTS ES MTRX

DTS 96/24

E E

E

C

C C

B THX DSCRT6.1

THX MTRX6.1

B DTS ES DSCRT6.1

DTS MTRX6.1

E E

E

C

C C

THX

E

DTS NEO:6

E

DOLBY

PRO LOGIC II

C

C C

THX SURROUND EX

THX Ultra2 Cinema

THX Music Mode

THX5.1

E

E DOLBY DIGITAL EX

DOLBY DIGITAL

E

C

ANALOG LINEAR PCM DTS (5.1 ch) DTS 96/24(5.1 ch) DTS (6.1 ch) D. D. (2 ch) D. D. (5.1 ch)

DTS DOLBY DIGITALMode dambiance

C : Slectionnable : Le nom du mode surround diffre suivant le rglage du paramtre surround SB CH OUT. B : Le nom du mode surround diffre suivant le signal d'entre. E : Non slectionnable

Printed in Japan 511 3890 005

16-11, YUSHIMA 3-CHOME, BUNKYOU-KU, TOKYO 113-0034, JAPAN Telephone: (03) 3837-5321

1. CENTER IMAGE (0.0 0.5: valeur par dfaut 0.2) Le paramtre dimage centrale servant rgler lexpansion du canal central en mode DTS NEO:6 MUSIC a t ajout.

2. Rglage OFF du canal Subwoofer Le canal subwoofer peut prsent tre rgl sur OFF dans tous les modes surround. OFF est rgl lorsque le niveau du canal est rgl un pas au-dessous de -12 dB.

3. Mode PURE DIRECT Le rglage est maintenant sauvegard.

4. Rglage du niveau de canal et du fondu

Rglage de la slection de canal

Manualsnet FAQs

If you want to find out how the AVC-A1SE Denon works, you can view and download the Denon AVC-A1SE Upgrade Operating Instructions on the Manualsnet website.

Yes, we have the Upgrade Operating Instructions for Denon AVC-A1SE as well as other Denon manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Upgrade Operating Instructions should include all the details that are needed to use a Denon AVC-A1SE. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Denon AVC-A1SE Upgrade Operating Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Denon AVC-A1SE Upgrade Operating Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Denon AVC-A1SE Upgrade Operating Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Denon AVC-A1SE Upgrade Operating Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Denon AVC-A1SE Upgrade Operating Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.