Contents

Dell OptiPlex 3000 Thin Client Accessories Installation Guide PDF

1 of 31
1 of 31

Summary of Content for Dell OptiPlex 3000 Thin Client Accessories Installation Guide PDF

OptiPlex Thin Client Accessories Installation Guide

Regulatory Model: D15U Regulatory Type: D15U003 March 2022 Rev. A00

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2022 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Chapter 1: Before you begin ......................................................................................................... 4

Chapter 2: OptiPlex Thin Client Vertical Stand..............................................................................5

Chapter 3: OptiPlex Thin Client Wall Mount.................................................................................. 8

Chapter 4: OptiPlex Thin Client Pro-2 E Series Monitor Mount.................................................... 14

Chapter 5: OptiPlex Thin Client Dual Vesa Mount........................................................................ 22

Chapter 6: OptiPlex Thin Client All-in-One Stand - MFS22.......................................................... 25

Chapter 7: Getting help............................................................................................................... 31 Contacting Dell................................................................................................................................................................... 31

Contents

Contents 3

Before you begin Steps

1. Save and close all open files and exit all open applications.

2. Shut down your system: Click Start > Power > Shut down .

NOTE: If you are using a Linux operating system, see the documentation of your operating system for shut-down

instructions.

3. Disconnect your system and all attached devices from their electrical outlets.

4. Disconnect all attached network devices and peripherals, such as keyboard, mouse, and monitor from your system.

CAUTION: To disconnect a network cable, first unplug the cable from your system and then unplug the cable

from the network device.

5. If the system unit or the adapter is being installed on the monitor:

a. Disconnect the power and all the display cables from the monitor. b. Remove the stand from the monitor and place the monitor on a clean and soft surface.

1

4 Before you begin

OptiPlex Thin Client Vertical Stand

Steps

1. Follow the instructions in Before working inside your computer.

2. Align the slot on the chassis with the tab on the vertical stand and place the computer on the vertical stand.

NOTE: Ensure to align the slot on the chassis with the tab on the vertical stand to prevent the computer from siding

out of the vertical stand.

2

OptiPlex Thin Client Vertical Stand 5

3. Route the power cable through the hook on the vertical stand to prevent accidental disconnection of the power cable.

6 OptiPlex Thin Client Vertical Stand

OptiPlex Thin Client Vertical Stand 7

OptiPlex Thin Client Wall Mount Steps

1. Follow the instructions in Before working inside your computer.

2. Place the VESA mount on the wall.

3. Install the four self-tapping screws (M4x13) to secure the VESA mount to the wall.

4. Install the two screws (M3x6) to secure the AC adapter sleeve to the VESA mount.

3

8 OptiPlex Thin Client Wall Mount

5. Install the four step screws (M4x4) on the chassis.

OptiPlex Thin Client Wall Mount 9

6. Align the step screw (M4x4) with the notches on the wall mount and mount the computer on the wall mount.

10 OptiPlex Thin Client Wall Mount

7. Place the AC adapter on the AC adapter sleeve.

OptiPlex Thin Client Wall Mount 11

8. Wrap the sleeve around the AC adapter and insert the retaining tabs into the holes on the AC adapter sleeve at an appropriate level.

12 OptiPlex Thin Client Wall Mount

OptiPlex Thin Client Wall Mount 13

OptiPlex Thin Client Pro-2 E Series Monitor Mount

Steps

1. Follow the instructions in Before working inside your computer.

2. Place the monitor on a soft cloth or cushion.

3. Install the four screws (M2.5x7) to secure the extender to the monitor stand.

4. Install the two screws (M3x6) to secure the AC adapter sleeve (upsell) to the extender plate.

4

14 OptiPlex Thin Client Pro-2 E Series Monitor Mount

NOTE: The AC adapter sleeve is an optional component that needs to be purchased separately.

5. Remove the monitor back cover.

6. Install the four screws (M4x10) to secure the VESA mount to the monitor.

OptiPlex Thin Client Pro-2 E Series Monitor Mount 15

7. Install the four step (M4x4) screws on the chassis.

16 OptiPlex Thin Client Pro-2 E Series Monitor Mount

8. Align the step screws (M4x4) with the notches on the VESA mount and mount the computer on the VESA mount.

OptiPlex Thin Client Pro-2 E Series Monitor Mount 17

9. Place the AC adapter on the AC adapter sleeve.

18 OptiPlex Thin Client Pro-2 E Series Monitor Mount

10. Wrap the sleeve around the AC adapter and insert the retaining tabs into the holes on the AC adapter sleeve at an appropriate level.

OptiPlex Thin Client Pro-2 E Series Monitor Mount 19

11. Place the AC adapter sleeve behind the desk.

20 OptiPlex Thin Client Pro-2 E Series Monitor Mount

OptiPlex Thin Client Pro-2 E Series Monitor Mount 21

OptiPlex Thin Client Dual Vesa Mount

Steps

1. Follow the instructions in Before working inside your computer.

2. Place the monitor on a soft cloth or cushion.

3. Remove the monitor back cover.

4. Install the four screws (M4x10) to secure the VESA mount on the monitor.

5. Slide the computer into the VESA mount.

6. Tighten the thumbscrew to secure the computer to the VESA mount

5

22 OptiPlex Thin Client Dual Vesa Mount

7. Align the screws on the power adapter enclosure with the screw holes on the VESA mount and side the power adapter enclosure to lock it in place.

NOTE: For OptiPlex 3000 Thin Client, the compatible AC adapter is 65 W AC adapter.

8. Lift the monitor and insert the slots on the VESA mount into the hooks on the monitor arm until it clicks in place.

9. Tighten the screw (M4x12) on the monitor arm to secure the monitor to the monitor arm.

OptiPlex Thin Client Dual Vesa Mount 23

24 OptiPlex Thin Client Dual Vesa Mount

OptiPlex Thin Client All-in-One Stand - MFS22

About this task

Steps

1. Install the two screws (M3x6) to secure the AC adapter sleeve (upsell) to the all-in-one stand.

NOTE: The AC adapter sleeve is an optional component that needs to be purchased separately.

2. Install the four step (M4x4) screws on the chassis.

6

OptiPlex Thin Client All-in-One Stand - MFS22 25

3. Align the step screws (M4x4) with the notches on the all-in-one stand and mount the computer on the all-in-one stand.

4. Align the tabs on the cable cover with the slots on the computer and slide the cable cover to lock it in place.

26 OptiPlex Thin Client All-in-One Stand - MFS22

5. Place the AC adapter on the AC adapter sleeve .

OptiPlex Thin Client All-in-One Stand - MFS22 27

6. Wrap the sleeve around the AC adapter and insert the retaining tabs into the holes on the AC adapter sleeve at an appropriate level.

28 OptiPlex Thin Client All-in-One Stand - MFS22

7. Place the AC adapter sleeve behind the desk.

OptiPlex Thin Client All-in-One Stand - MFS22 29

30 OptiPlex Thin Client All-in-One Stand - MFS22

Getting help

Topics:

Contacting Dell

Contacting Dell

Prerequisites

NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing

slip, bill, or Dell product catalog.

About this task

Dell provides several online and telephone-based support and service options. Availability varies by country and product,

Manualsnet FAQs

If you want to find out how the OptiPlex 3000 Dell works, you can view and download the Dell OptiPlex 3000 Thin Client Accessories Installation Guide on the Manualsnet website.

Yes, we have the Accessories Installation Guide for Dell OptiPlex 3000 as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Accessories Installation Guide should include all the details that are needed to use a Dell OptiPlex 3000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell OptiPlex 3000 Thin Client Accessories Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell OptiPlex 3000 Thin Client Accessories Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell OptiPlex 3000 Thin Client Accessories Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell OptiPlex 3000 Thin Client Accessories Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell OptiPlex 3000 Thin Client Accessories Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.