Contents

Dell EMC VMAX 200K V9.1.0 Storage Installation Guide PDF

1 of 20
1 of 20

Summary of Content for Dell EMC VMAX 200K V9.1.0 Storage Installation Guide PDF

Dell EMC Unisphere 360 Version 9.1.0

Installation Guide Rev 02

March 2020

Copyright 2014-2020 Dell Inc. or its subsidiaries. All rights reserved.

Dell believes the information in this publication is accurate as of its publication date. The information is subject to change without notice.

THE INFORMATION IN THIS PUBLICATION IS PROVIDED AS-IS. DELL MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND

WITH RESPECT TO THE INFORMATION IN THIS PUBLICATION, AND SPECIFICALLY DISCLAIMS IMPLIED WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. USE, COPYING, AND DISTRIBUTION OF ANY DELL SOFTWARE DESCRIBED

IN THIS PUBLICATION REQUIRES AN APPLICABLE SOFTWARE LICENSE.

Dell Technologies, Dell, EMC, Dell EMC and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be the property

of their respective owners. Published in the USA.

Dell EMC Hopkinton, Massachusetts 01748-9103 1-508-435-1000 In North America 1-866-464-7381 www.DellEMC.com

2 Dell EMC Unisphere 360 Installation Guide

5

About this content 7

Pre-installation considerations 9 Product description........................................................................................... 10 Before you begin............................................................................................... 10 Server operating system requirements.............................................................. 10 Server hardware requirements........................................................................... 11 Client operating system requirements................................................................11 Client browser requirements.............................................................................. 11 Setting up the PostgreSQL user on Linux.......................................................... 11

Installing Unisphere 360 13 Installing Unisphere 360 on a Windows system..................................................14 Installing Unisphere 360 on a Linux system....................................................... 14 Launching Unisphere 360.................................................................................. 15 Starting and stopping the Unisphere 360 server............................................... 16

Starting and stopping the Unisphere 360 server on Windows...............16 Starting and stopping the Unisphere 360 server on Linux.....................16

Upgrading Unisphere 360.................................................................................. 16

Configuring security settings 19 Using Lightweight Directory Access Protocol or Active Directory.................... 20

Tables

Chapter 1

Chapter 2

Chapter 3

CONTENTS

Dell EMC Unisphere 360 Installation Guide 3

Contents

4 Dell EMC Unisphere 360 Installation Guide

Unisphere 360 server hardware requirements.................................................................... 111

TABLES

Dell EMC Unisphere 360 Installation Guide 5

Tables

6 Dell EMC Unisphere 360 Installation Guide

About this content

As part of an effort to improve its product lines, Dell EMC periodically releases revisions of its software and hardware. Therefore, some functions described in this document might not be supported by all versions of the software or hardware currently in use. The product release notes provide the most up-to-date information on product features.

Contact your Dell EMC technical support professional if a product does not function properly or does not function as described in this document.

This document was accurate at publication time. New versions of this document might be released on the Dell EMC Online Support website. Check the Dell EMC Online Support site https:// support.EMC.com to ensure that you are using the latest version of this document.

Purpose

This document describes how to configure and use Unisphere 360.

Related documentation

The following publications provide additional information:

l Dell EMC Unisphere for PowerMax Release Notes

l Dell EMC Unisphere for PowerMax Online Help

l Dell EMC Unisphere 360 Online Help

l Dell EMC Solutions Enabler Installation Guide

l Dell EMC Solutions Enabler Release Notes

l Dell EMC Solutions Enabler SRM CLI Product Guide

l Dell EMC Solutions Enabler CLI Command Reference

l Dell EMC PowerMax Family Security Configuration Guide

Dell EMC technical support, documentation, release notes, software updates, or information about Dell EMC products can be obtained at https://support.emc.com (registration required) or https:// www.dellemc.com/en-us/documentation/vmax-all-flash-family.htm.

Dell EMC Unisphere 360 Installation Guide 7

Where to get help

Dell EMC support, product, and licensing information can be obtained as follows:

Product information

Dell EMC support, product, and licensing information can be obtained on the Dell EMC Online Support site as described next. To open a service request through the Dell EMC Online Support site, you must have a valid support agreement. Contact your Dell EMC sales representative for details about obtaining a valid support agreement or to answer any questions about your account.

Technical support

Dell EMC offers a variety of support options:

l Support by Product Dell EMC offers consolidated, product-specific information on the Web at: https://support.EMC.com/products The Support by Product web pages offer quick links to Documentation, White Papers, Advisories (such as frequently used Knowledgebase articles), and Downloads, as well as more dynamic content, such as presentations, discussion, relevant Customer Support Forum entries, and a link to Dell EMC Live Chat.

l Chat with Support Open a Chat or instant message session with a Dell EMC Support Engineer.

eLicensing support

To activate your entitlements and obtain your PowerMax license files, visit the Service Center on https://support.EMC.com, as directed on your License Authorization Code (LAC) letter emailed to you.

For help with missing or incorrect entitlements after activation (that is, expected functionality remains unavailable because it is not licensed), contact your Dell EMC Account Representative or Authorized Reseller.

For help with any errors applying license files through Solutions Enabler, contact the Dell EMC Customer Support Center.

If you are missing a LAC letter, or require further instructions on activating your licenses through the Online Support site, contact Dell EMC's worldwide Licensing team at licensing@emc.com or call:

l North America, Latin America, APJK, Australia, New Zealand: SVC4EMC (800-782-4362) and follow the voice prompts.

l EMEA: +353 (0) 21 4879862 and follow the voice prompts.

Your comments

Your suggestions help us improve the accuracy, organization, and overall quality of the documentation. Send your comments and feedback to: VMAXContentFeedback@emc.com

About this content

8 Dell EMC Unisphere 360 Installation Guide

CHAPTER 1

Pre-installation considerations

l Product description............................................................................................................... 10 l Before you begin....................................................................................................................10 l Server operating system requirements.................................................................................. 10 l Server hardware requirements............................................................................................... 11 l Client operating system requirements.................................................................................... 11 l Client browser requirements...................................................................................................11 l Setting up the PostgreSQL user on Linux............................................................................... 11

Dell EMC Unisphere 360 Installation Guide 9

Product description Unisphere 360 is an on-premises management solution that provides an aggregated view of the storage environment. The enrolled Unisphere instances provide the information for this aggregated view.

The term Unisphere incorporates "Unisphere for PowerMax" for the management of PowerMax and All Flash storage systems using PowerMaxOS 5978, and "Unisphere for VMAX" for the management of VMAX All Flash and VMAX storage systems using HYPERMAX OS 5977 and Enginuity 5876.

Unisphere 360 consolidates and simplifies management of PowerMax and All Flash storage systems using PowerMaxOS 5978, and management of VMAX All Flash and VMAX storage systems using HYPERMAX OS 5977 and Enginuity OS 5876.

Before you begin The following section contains information to consider before beginning the installation:

l The user performing the installation must have operating system administrator permissions on the system.

l On Linux systems, before starting the installation procedure, create the postgres user and group. For more information about creating the postgres user and group, see Setting up the PostgreSQL user on Linux on page 11.

Server operating system requirements Windows

The following Windows versions are supported:

l Windows Server 2016

l Windows Server 2012 R2

Linux

Note: Before you attempt to install Unisphere 360 on Red Hat Linux 6.0 or a later release, verify that the correct unzip package is installed. Not all installer packages include these libraries by default so verify their presence before running the installation program. Do not attempt to run the installation process without them. Without this item, an error might occur at the end of the product install and sometimes the product might not function as intended. The package is:

unzip_XYZ_x86_64.rpm / corresponding package

The following Linux versions are supported:

l Red Hat Enterprise Linux 6.7 (64-bit)

l Red Hat Enterprise Linux 7.2 (64-bit)

l SUSE Linux Enterprise Server 11 (64-bit)

l SUSE Linux Enterprise Server 12 (64-bit)

Pre-installation considerations

10 Dell EMC Unisphere 360 Installation Guide

Server hardware requirements The following hardware requirements apply for Unisphere 360:

Table 1 Unisphere 360 server hardware requirements

Operating system Windows Linux

Minimum processor 2-core 1.8 GHz processor 2-core 1.8 GHz processor

Minimum available memory 16 GB 16 GB

Minimum available disk space

120 GB 120 GB

Client operating system requirements The following client operating systems are supported:

l Windows 7

l Windows 8

l Windows 10

Client browser requirements The minimum browser versions that are supported are:

l Firefox version 59.0

l Chrome version 65.0.3325

l Internet Explorer 11.0 (Desktop only)

l Microsoft Edge 38

Setting up the PostgreSQL user on Linux Before starting a new installation of Unisphere for PowerMax or Unisphere 360 on Linux, the PostgreSQL user (postgres) and group (postgres), must be present. Also, the user must be a member of the postgres group.

Use the following commands to create the postgres group and add the postgres user to the postgres group:

groupadd postgres useradd -g postgres postgres

Pre-installation considerations

Dell EMC Unisphere 360 Installation Guide 11

Pre-installation considerations

12 Dell EMC Unisphere 360 Installation Guide

CHAPTER 2

Installing Unisphere 360

l Installing Unisphere 360 on a Windows system...................................................................... 14 l Installing Unisphere 360 on a Linux system............................................................................ 14 l Launching Unisphere 360.......................................................................................................15 l Starting and stopping the Unisphere 360 server.................................................................... 16 l Upgrading Unisphere 360...................................................................................................... 16

Dell EMC Unisphere 360 Installation Guide 13

Installing Unisphere 360 on a Windows system About this task

The default installation method for Windows is the wizard, but you can launch the console mode using the following command:

UNISPHERE360_version_WINDOWS_X86_64.exe -i console To install Unisphere 360:

Procedure

1. To run the installer, double-click the executable file.

2. In the Introduction page, click Next.

3. In the Choose Install Folder page, do one of the following:

l In the Where Would You Like to Install field, type the installation path.

l Click Choose and go to the installation path.

4. Click Next.

5. In the Ports Configuration page, do the following:

a. In the HTTPS Port No field, type the HTTPS port number, or accept the default value of 8470.

b. In the DB Port No field, type the database port number, or accept the default value of 3424.

c. Click Next.

6. In the X.509 Certificate-based Client Authentication page, click Next.

Note: X.509 user authentication is no longer supported. Selection of this installation option results in Unisphere 360 not functioning as expected.

7. In the Pre-Installation Summary page, review the summary information and click Install. A first-time fresh installation on Windows Server 2016 may ask for the Microsoft Visual C++ Redistributable Package. Click OK.

The installation operation completes.

8. In the Install Complete page, click Done.

After you finish

The installation operation creates a shortcut on the Windows desktop. Double-click this shortcut to launch Unisphere 360.

Installing Unisphere 360 on a Linux system About this task

The default installation method for Linux is the console mode, but you can launch the wizard mode using the following command:

./UNISPHERE360_version_LINUX_X86_64.bin -i swing To install Unisphere 360:

Installing Unisphere 360

14 Dell EMC Unisphere 360 Installation Guide

Procedure

1. To run the installer, run the following command:

./UNISPHERE360_version_LINUX_X86_64.bin -i console

2. In the Introduction panel, press Enter.

3. In the Choose Install Folder panel, do one of the following:

l Type the installation path and press Enter.

l Press Enter to accept the default installation path.

4. In the Ports Configuration panel, do the following:

a. Type the database port number and press Enter, or press Enter to accept the default value of 3424.

b. Type the HTTPS port number and press Enter, or press Enter to accept the default value of 8470.

5. In the X.509 Certificate-based Client Authentication panel, click Next.

Note: X.509 user authentication is no longer supported. Selection of this installation option results in Unisphere 360 not functioning as expected.

6. In the Pre-Installation Summary panel, review the summary information and press Enter.

The installation operation completes.

7. In the Install Complete panel, press Enter to exit the installer.

Launching Unisphere 360 About this task

When using Lightweight Directory Access Protocol (LDAP) or Active Directory (AD), ensure that you use the same user names as when signing in to Unisphere for PowerMax using LDAP/AD. For more information about configuring LDAP/AD, see Using Lightweight Directory Access Protocol or Active Directory on page 20.

To launch Unisphere 360:

Procedure

1. Type the following URL in a browser:

https://host_IP|host_name:port_number/unisphere360

The port number is configured during installation. The default HTTPS port number is 8470.

If the host IP address is an IPv6 address, surround the IP address with square brackets, for example:

https://[2001:db8:ffff:ffff:ffff:ffff:ffff:ffff]:8470/unisphere360 If the host IP address is an IPv4 address, type the IP address as normal, for example:

https://198.51.100.255:8470/unisphere360

2. At the login window, type the Unisphere Initial Setup User username and password.

Installing Unisphere 360

Dell EMC Unisphere 360 Installation Guide 15

The default username for the Unisphere Initial Setup User in Unisphere 360 is admin and the default password is admin.

3. Click Login.

Starting and stopping the Unisphere 360 server About this task

If required to do so, you can start and stop the Unisphere 360 server manually.

Starting and stopping the Unisphere 360 server on Windows About this task

To start or stop the Unisphere 360 server in Windows, use the Services panel. Click Control Panel > Administrative Tools > Services to open the Services panel.

Right-click on the EMCUnisphere360Server service. Select Start, Stop, or Restart, as appropriate.

Alternatively, you can use the following commands to start or stop the Windows services using the CLI:

net start " EMCUnisphere360Server" net stop " EMCUnisphere360Server"

Starting and stopping the Unisphere 360 server on Linux About this task

To start or stop the Unisphere 360 server in Linux, change to this directory: /etc/init.d and use the following commands:

Action Command

Start server ./unisphere360 start

Stop server ./unisphere360 stop

Restart server ./unisphere360 restart

Upgrading Unisphere 360 About this task

Note: As part of the upgrade process, you must re-enroll all Unisphere for PowerMax instances to enhance security and system-to-system trust.

The following upgrade paths are supported:

l V9.0.x -> V9.1.x

l V8.4.x -> V9.0.x

l V8.3.x -> V9.0.x

l V8.3.x -> V8.4.x

l V8.2.x -> V8.4.x

l V8.2.x -> V8.3.x

Installing Unisphere 360

16 Dell EMC Unisphere 360 Installation Guide

Note: Upgrading directly from V8.4.x to V9.1.x is not supported. Upgrade to V9.0.x first, and from there to V9.1.x.

To upgrade Unisphere 360:

Procedure

1. Take note of the Unisphere for PowerMax instances that are enrolled currently.

2. Navigate to the location of the kit and run the appropriate executable file for your operating system.

3. When prompted to do so, confirm that you want to upgrade the installed features.

4. Complete the upgrade by following the instructions on screen.

After you finish

Launch Unisphere 360 and re-enroll the required Unisphere for PowerMax instances.

Installing Unisphere 360

Dell EMC Unisphere 360 Installation Guide 17

Installing Unisphere 360

18 Dell EMC Unisphere 360 Installation Guide

CHAPTER 3

Configuring security settings

l Using Lightweight Directory Access Protocol or Active Directory.........................................20

Dell EMC Unisphere 360 Installation Guide 19

Using Lightweight Directory Access Protocol or Active Directory

Before you begin

Lightweight Directory Access Protocol (LDAP) or Active Directory (AD) users must be configured as external users under domain.com\username.

About this task

When using LDAP or AD, complete the following steps:

Procedure

1. Configure LDAP or AD for a Unisphere for PowerMax instance.

2. Enroll that Unisphere for PowerMax in Unisphere 360.

3. Add users as external users to ensure that they can lo

Manualsnet FAQs

If you want to find out how the EMC Dell works, you can view and download the Dell EMC VMAX 200K V9.1.0 Storage Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Dell EMC as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Dell EMC. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell EMC VMAX 200K V9.1.0 Storage Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell EMC VMAX 200K V9.1.0 Storage Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell EMC VMAX 200K V9.1.0 Storage Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell EMC VMAX 200K V9.1.0 Storage Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell EMC VMAX 200K V9.1.0 Storage Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.