Contents

Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide PDF

1 of 34
1 of 34

Summary of Content for Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide PDF

Dell OpenManage Connection Version 3.0 for IBM Tivoli Netcool/OMNIbus Installation Guide

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2011 - 2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

2018 - 10

Rev. A01

Contents

1 Introduction....................................................................................................................................................5

2 Prerequisites..................................................................................................................................................6 Supported operating systems and requirements for the managing system............................................................... 6 Supported Operating Systems for managed systems...................................................................................................8 Supported Dell devices and firmware..............................................................................................................................9

3 Installing Dell OpenManage Connection for Netcool/OMNIbus.................................................................... 12 Dell OpenManage Connection for Netcool/OMNIbus package details..................................................................... 12

Integration details for Netcool/OMNIbus components..........................................................................................13 Installing Probe Integration.............................................................................................................................................. 13 Installing ObjectServer Integration................................................................................................................................. 15

Reconfiguring Dell tools for monitoring events from Dell servers or workstations running VMware ESXi version 5.5 or later .....................................................................................................................................................16 Configuring Dell Server Administrator Web Server console on the ObjectServer............................................. 16 Configuring OpenManage Essentials (OME) console on the ObjectServer....................................................... 17 Configuring Dell PowerVault Modular Disk Storage Manager console on the ObjectServer............................ 17 Configuring Dell OpenManage Network Manager (OMNM) console on the ObjectServer............................. 17 Configuring Dell AirWave Management Platform console on the ObjectServer................................................ 18 Configuring Dell Connections License Manager console on the ObjectServer.................................................. 18

The Dell ConfigUtility........................................................................................................................................................19 Installing Desktop Integration.......................................................................................................................................... 19

Using the Dell ConfigUtility for Desktop.................................................................................................................. 19 Configuring Dell Warranty Report tool on the Desktop Server............................................................................20

Installing Web GUI Integration.........................................................................................................................................21 Using the Dell ConfigUtility for Web GUI................................................................................................................ 23 Updating the Dell Tools menu on the Web GUI Server......................................................................................... 24 Configuring Dell Server Administrator Web Server console on the Web GUI.................................................... 24 Configuring Dell OpenManage Essentials (OME) console on the Web GUI.......................................................24 Configuring Dell PowerVault Modular Disk Storage Manager console on the Web GUI...................................25 Configuring Dell OpenManage Network Manager (OMNM) console on the Web GUI....................................25 Configuring Dell AirWave Management Platform console on the Web GUI.......................................................25 Configuring Dell Connections License Manager console on the Web GUI.........................................................26 Configuring Dell Warranty Report tool on the web GUI........................................................................................26 Configuring Dell consoles on the Web GUI server on systems running Linux....................................................26

4 Upgrading Dell OpenManage Connection for Netcool/OMNIbus................................................................. 28

5 Uninstalling Dell OpenManage Connection for Netcool/OMNIbus............................................................... 29 Uninstalling Probe Integration.........................................................................................................................................29 Uninstalling ObjectServer Integration............................................................................................................................29 Uninstalling Desktop Integration..................................................................................................................................... 31

Contents 3

Uninstalling Web GUI Integration.................................................................................................................................... 31

6 Accessing documents from Dell Support Site.............................................................................................. 33

7 Contacting Dell............................................................................................................................................ 34

4 Contents

Introduction This guide provides information about the software requirement, system requirements and the steps to install, configure, and uninstall Dell OpenManage Connection Version 3.0 for IBM Tivoli Netcool/OMNIbus.

Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus enables the customers to monitor Dell Original Equipment Manufacturing (OEM) Servers, Dell Datacenter Scalable Solutions (DSS), PowerEdge Servers, Dell Remote Access Controllers (DRACs), workstations, chassis, storage, and network devices in an environment managed by IBM Tivoli Netcool/OMNIbus. The Dell OpenManage Connection also supports console launch of the Dell devices and other Dell tools from the received alerts to perform further troubleshooting and configuration or management activities.

The following Dell devices are supported by the Dell OpenManage Connection:

Dell OEM servers

Dell Datacenter Scalable Solutions (DSS)

Dell 10th generation of PowerEdge servers to Dell 13th Generation of PowerEdge servers

Dell Precision Rack workstations

Dell Remote Access Controllers:

Integrated Dell Remote Access Controller 8 (iDRAC8)

Integrated Dell Remote Access Controller 7 (iDRAC7)

Integrated Dell Remote Access Controller 6 (iDRAC6)

Dell Remote Access Controller 5 (DRAC5)

Dell Chassis:

Dell PowerEdge FX2

Dell PowerEdge VRTX

Dell PowerEdge M1000e

Dell Storage Arrays:

Dell Compellent Storage Arrays

Dell 10th Generation of PowerVault NX storage arrays to Dell 12th Generation of PowerVault NX Storage Arrays

Dell EqualLogic PS-Series Storage Arrays

Dell PowerVault MD Storage Arrays

Dell Network Switches:

S-Series Switches

M-Series Switches

Z-Series Switches

C-Series Switches

N-Series Switches

W-Series Switches

This guide is intended for system administrators who are familiar with IBM Tivoli Netcool/OMNIbus 7.3.1, 7.4, or 8.1

Before installing this version of Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus, download the latest Installation Guide from dell.com/omconnectionsEnterpriseSystemsManagement.

For more information about accessing documents, see Accessing Documents From The Dell Support Site - Software.

1

Introduction 5

Prerequisites Complete the following prerequisites.

Topics:

Supported operating systems and requirements for the managing system

Supported Operating Systems for managed systems

Supported Dell devices and firmware

Supported operating systems and requirements for the managing system The following tables lists the operating systems and requirements for integrating the Dell OpenManage Connection on the systems where the Netcool/OMNIbus version 7.3.1, 7.4, or 8.1 components are installed:

Table 1. Supported operating systems for Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 8.1

VMware vSphere ESXi Windows Server SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

ESXi 5.5 Windows Server 2012 R2 64-bit (Standard, Datacenter)

SLES 12 64-bit RHEL 7.0-1 64-bit (Server)

ESXi 5.0 Windows Server 2012 64-bit (Standard, Datacenter)

SLES 11.0-4 64-bit RHEL 6.0-7 64-bit (Client, Server, Workstation)

ESXi 4.1 RHEL 5.7-11 64-bit (Advanced, Desktop)

ESXi 4.0 RHEL 5.7-10 64-bit ( Server)

ESXi 3.5

ESX 3.5

Table 2. Supported operating systems for Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 7.4

VMware vSphere ESXi

Windows Server Windows Client SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

SUSE Linux for Desktop (SLED)

ESXi 5.5 Windows Server 2008 R2 64-bit SP1 (Enterprise, Datacenter, Standard)

Windows 7 32-bit SP1 (Enterprise, Professional)

SLES 11.0-3 64-bit RHEL 6.0-5 64-bit (Server, Workstation)

SLED 11.0-3 64- bit

ESXi 5.0 Windows Server 2008 R2 32-bit SP2 (Enterprise, Standard)

Windows 8 64-bit (Enterprise, Professional, Standard)

SLES 10.0-4 64-bit RHEL 6.0-10 64-bit (Advanced, Desktop, Server)

SLED 10.0-3 64- bit

2

6 Prerequisites

VMware vSphere ESXi

Windows Server Windows Client SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

SUSE Linux for Desktop (SLED)

ESXi 4.1 Windows Server 2008 64-bit SP2 (Enterprise, Standard)

Windows 7 64-bit SP1 (Enterprise, Professional)

ESXi 4.0 Windows Server 2012 R2 64-bit (Datacenter, Essentials, Standard)

ESXi 3.5 Windows Server 2012 64-bit (Datacenter, Essentials, Standard)

ESX 3.5

Table 3. Supported operating systems for Dell OpenManage Connection for IBM Tivoli Netcool/OMNIbus 7.3.1

VMware vSphere ESXi

Windows Server Windows Client SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

SUSE Linux for Desktop (SLED)

ESXi 5.5 Windows Server 2008 R2 64-bit SP1 (Enterprise, Datacenter, Standard)

Windows Vista Enterprise 64-bit SP2

SLES 11.0-3 64-bit RHEL 6.0-5 64-bit (Client, Server, Workstation)

SLED 11.0-3 64- bit

ESXi 5.0 Windows Server 2008 R2 32-bit SP2 (Enterprise, Standard)

Windows Vista Enterprise 32-bit SP2

SLES 11.0-3 32-bit RHEL 6.0-5 32-bit (Server, Workstation)

SLED 10.0-4 64- bit

ESXi 4.1 Windows Server 2008 64-bit SP2 (Enterprise, Standard)

Windows Vista Ultimate 64-bit SP2

SLES 10.0-4 64-bit RHEL 6.0-4 32-bit (Client)

SLED 10.0-4 32- bit

ESXi 4.0 Windows Server 2008 32-bit SP2 (Enterprise, Standard)

Windows Vista Ultimate 32-bit SP2

SLES 10.0-4 32-bit RHEL 5.0-10 64-bit (Advanced, Desktop, Server)

ESXi 3.5 Windows XP Professional 32-bit SP3

RHEL 5.0-10 32-bit (Advanced, Desktop, Server)

ESX 3.5 Windows 7 64-bit SP1 (Professional, Enterprise)

Windows 7 32-bit SP1 (Professional, Enterprise)

Table 4. IBM Tivoli Netcool/OMNIbus component requirements

Component Requirement Purpose

Probes Configure the MTTrapd Simple Network Management Protocol (SNMP) probe and

To receive and process the SNMP traps sent by Dell devices.

Prerequisites 7

Component Requirement Purpose

the Netcool/OMNIbus Knowledge Library (NcKL).

ObjectServer Install and configure the confpack utility. To import Dell integration automation triggers, tools, menus, and conversion classes.

Desktop Make sure that the SNMP/WS-MAN communication between the desktop and Dell devices exists.

To retrieve the required information from Dell devices.

Web GUI Install and configure the OMNIbus web GUI and WAAPI.

Make sure that the SNMP/WS-MAN communication channel between the web GUI server and the managed Dell systems exists.

To support Dell tools available for Dell OpenManage Connection.

To retrieve the required information from Dell devices.

Supported Operating Systems for managed systems The following table lists the operating systems supported on the supported Dell devices:

Table 5. Supported operating systems for Dell Workstations

VMware vSphere ESXi Windows Server SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

ESXi 6.0 U1 Windows Server 2012 R2 (Datacenter, Foundation, Essentials, and Standard editions)

SLES 12 64-bit RHEL 7.2 64-bit

ESXi 5.5 U3 Microsoft Windows Server 2008 R2

SLES 11 SP4 64-bit RHEL 7.1 64-bit

ESXi 5.5 U2 Windows 7 Professional 32-bit and 64-bit

RHEL 7.0 64-bit

Microsoft Windows Server 2008 SP1

RHEL 6.7 64-bit

Table 6. Supported operating systems for Dell Servers

VMware vSphere ESXi Windows Server SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

ESXi 6.0 U1 Windows Server 2012 R2 (Datacenter, Foundation, Essentials, and Standard editions)

SLES 12 64-bit RHEL 7.2 64-bit

ESXi 6.0 Microsoft Windows Server 2012 Essentials

SLES 11 SP4 64-bit) RHEL 7.1 64-bit

ESXi 5.5 U3 Windows Essential Business Server 2008 SP1

RHEL 7.0 64-bit

8 Prerequisites

VMware vSphere ESXi Windows Server SUSE Linux Enterprise Server (SLES)

Red Hat Enterprise Linux Server (RHEL)

ESXi 5.5 U2 Windows Essential Business Server 2008 SP1

RHEL 6.7 64-bit

ESXi 5.5 Windows Server 2008 SP2 32- bit and 64-bit

RHEL 6.5 64-bit

ESXi 5.1 U3 Windows Server 2008 R2 64-bit RHEL 6.2 64-bit

ESXi 5.1 U2 Windows Server 2008 R2 SP1 64-bit

RHEL 6.0 64-bit

ESXi 5.1 U1 Windows Server 2008 R1 and R2 (HPC Edition)

RHEL 5.9 64-bit and 32-bit

ESXi 5.1 Windows Storage Server 2008 SP2

RHEL 5.5 64-bit and 32-bit

ESXi 5.0 U3 Windows Small Business Server 2008 SP2

RHEL 5.3 64-bit and 32-bit

ESXi 5.0 U2 Windows Small Business Server 2008 R2

RHEL 5.0 64-bit and 32-bit

ESXi 5.0 U1 Microsoft Windows Small Business Server 2011

Microsoft Windows Server 2012

Windows Small Business Server 2003 R2 SP2

Windows Server 2003 R2 32-bit and 64-bit

Windows Storage Server 2003 R2

Windows Server 2003 (Compute Cluster Edition)

Windows Unified DataStorage Server 64-bit

NOTE: If you have installed the Dell OpenManage connection for ITNM on a system running Windows, then ensure that you have also installed ActivePerl in the system.

Supported Dell devices and firmware The following table lists the Dell devices and their supported firmware versions for Dell OpenManage Connection.

Table 7. Dell devices and firmware

Dell Devices Supported OMSA Versions Supported Firmware Versions

Dell OEM Servers 8.3

8.2

8.1

NA

Dell PowerEdge servers 8.3 NA

Prerequisites 9

Dell Devices Supported OMSA Versions Supported Firmware Versions

8.2

8.1

Dell Workstations 8.3

8.2

8.1

NA

Dell Datacenter Scalable Solutions (DSS 1500 and DSS 2500)

NA 2.30.30.30

2.16.16.12

Dell Datacenter Scalable Solutions (DSS 1510)

NA 2.30.30.30

2.17.17.13

iDRAC8 NA 2.30.30.30

2.20.20.20

iDRAC7 NA 2.30.30.30

2.20.20.20

iDRAC6 Modular NA 3.6

3.5

iDRAC6 Monolithic NA 1.97

1.96

DRAC5 NA 1.6

1.5

FX2 CMC NA 1.4

1.3

VRTX CMC NA 2.2

2.1

CMC NA 5.2

5.1

Dell PowerVault NX Storage Arrays 8.3

8.2

8.1

NA

Dell Compellent Storage Arrays NA 6.6.2

Dell EqualLogic PS-Series Storage Arrays NA 8.1

8.0

Dell PowerVault MD Storage Arrays NA 08.20.09.60

08.10.05.60

10 Prerequisites

Dell Devices Supported OMSA Versions Supported Firmware Versions

Dell Network Switches NA S-Series

S55 (8.3.5.5 and 8.3.5.3)

S60 (8.3.3.9 and 8.3.3.8)

S4810 (9.6 and 9.5)

S4820T (9.5 and 9.4)

S5000 (9.1 and 9.0)

S6000 (9.5 and 9.4)

M-Series

MXL (9.6 and 9.5)

MIOA (9.5 and 9.4)

Z-Series

Z9500 (9.2)

Z9000 (9.5 and 9.4)

C-Series

C150 (8.4.6.0)

C300 (8.4.5.0)

N-Series

6.1.2 and 6.1

W-Series

W-Series Mobility Controllers (6.4)

NOTE: Dell Workstations refers to Dell Precision R7910 Rack Workstations.

Prerequisites 11

Installing Dell OpenManage Connection for Netcool/OMNIbus

To install Dell OpenManage Connection for Netcool/OMNIbus, you must extract the component-specific files on the systems where you have installed the Netcool/OMNIbus components and deploy them. For more information on extracting component-specific files, see Integration Details for Netcool/OMNIbus Components.

Before you begin deploying the files:

1 Download the Dell_OpenManage_Connection_for_OMNIbus_v3_0.zip file from dell.com/support and extract the contents to a folder. For more information on contents of the zip file, see Dell OpenManage Connection for Netcool/OMNIbus package Details.

2 Log in as Netcool administrator on any system where you have installed any of the Netcool/OMNIbus components.

Topics:

Dell OpenManage Connection for Netcool/OMNIbus package details

Installing Probe Integration

Installing ObjectServer Integration

The Dell ConfigUtility

Installing Desktop Integration

Installing Web GUI Integration

Dell OpenManage Connection for Netcool/OMNIbus package details The Dell OpenManage Connection for Netcool/OMNIbus is packaged as a zip file. This is applicable to systems running Windows and Linux including VMware ESXi environments. When you extract the Dell_OpenManage_Connection_for_OMNIbus_v3_0.zip zip file, the following folders and files are extracted:

desktop_integration

objectserver_integration

probe_integration

webgui_integration

Dell_OMC_3_0_For_IBM_OMNIbus_IG.pdf

Dell_OMC_3_0_For_Omnibus_ReadMe.txt

license_en.txt

NOTE: Once the folders and files have been extracted, and the system requirements are met with, ensure that you see the Dell_OMC_3_0_For_Omnibus_ReadMe.txt and the license_en.txt files before you proceed with the installation.

Deploy the contents of the folders on the corresponding Netcool/OMNIbus components to monitor the supported Dell devices.

3

12 Installing Dell OpenManage Connection for Netcool/OMNIbus

Integration details for Netcool/OMNIbus components The following table lists the Netcool/OMNIbus components and the Integration folders for Dell OpenManage Connection. Deploy the integration files of Dell OpenManage Connection from the corresponding folder to the Netcool/OMNIbus components folder.

Table 8. Netcool/OMNIbus Components

Component Integration Folders

probe_integration Contains the rules and lookup table files for the supported Dell devices.

objectserver_integration Contains the exported Dell integration automation triggers, tools, menus, and conversion classes.

desktop_integration Contains utilities that you require for configuring and launching the consoles for the supported Dell devices.

webgui_integration Contains the Dell integration tools, menus, and utilities that you require for configuring the Dell device consoles from the Netcool/OMNIbus web GUI.

Installing Probe Integration The probe integration folder contains the following folder and version file:

Dell

To deploy the integration of the supported Dell devices:

1 Copy the dell folder under probe_integration and place it under the %NC_RULES_HOME%\include-snmptrap folder on the system where you have installed the Probe component.

NOTE: On systems running Linux, use the $NC_RULES_HOME/include-snmptrap folder.

2 Navigate to the $NC_RULES_HOME folder, open the snmptrap-rules.file and perform the following steps:

a Append the following command in the include rules section:

include "$NC_RULES_HOME/include-snmptrap/dell/dell.master.include.rules" b Append the following command in the include lookup table section:

include "$NC_RULES_HOME/include-snmptrap/dell/dell.master.include.lookup"

NOTE: This step is applicable to systems running Linux only.

3 Ensure that the copied dell folder and the files under it have permissions for the probe rules in accordance with the IBM guidelines. For more information, see IBM Netcool/OMNIbus documentation.

4 Perform the followings steps:

Server traps

a Uncomment the dell-StorageManagement-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the dell-StorageManagement-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

c Uncomment the dell-MIB-Dell-10892.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

d Uncomment the dell-MIB-Dell-10892.include.snmptrap.rules file include statement in the dell.master.include.rules file.

Installing Dell OpenManage Connection for Netcool/OMNIbus 13

OOB Server (iDRAC8, iDRAC7) traps

a Uncomment the dell-IDRAC-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the dell-IDRAC-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

FX2 CMC, VRTX CMC, CMC , iDRAC6, DRAC5 traps

a Uncomment the dell-RAC-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the dell-RAC-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

Compellent Storage Array traps

a Uncomment the dell-STORAGE-SC-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the dell-STORAGE-SC-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

EqualLogic traps

a Uncomment the equalLogic-EQLMEMBER-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the equalLogic-EQLDISK-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

c Uncomment the equalLogic-SCSI-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

d Uncomment the equalLogic-EQLMEMBER-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

e Uncomment the equalLogic-EQLDISK-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

f Uncomment the equalLogic-SCSI-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

g Uncomment the equalLogic-ISCSI-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

PowerVault MD Storage Array traps

a Uncomment the dell-MDStorageArray-MIB.include.snmptrap.lookup file include statement in the dell.master.include.lookup file.

b Uncomment the dell-MDStorageArray-MIB.include.snmptrap.rules file include statement in the dell.master.include.rules file.

Dell Network Switch traps

S-Series, M-Series, Z-Series, and C-Series Switches

1 Uncomment the dell.switch.master.include.lookup file include statement in the dell.master.include.lookup file.

2 Uncomment the dell.switch.master.include.rules file include statement in the dell.master.include.rules file.

N-Series Switches

1 Uncomment the dell.Nseriesswitch.master.include.lookup file include statement in the dell.master.include.lookup file.

2 Uncomment the dell.Nseriesswitch.master.include.rules file include statement in the dell.master.include.rules file.

W-Series Switches

1 Uncomment the dell.Wseriesswitch.master.include.lookup file include statement in the dell.master.include.lookup file.

14 Installing Dell OpenManage Connection for Netcool/OMNIbus

2 Uncomment the dell.Wseriesswitch.master.include.rules file include statement in the dell.master.include.rules file.

5 Copy the delldevice_int_mttrapdprobe.ver version file to the %OMNIHOME% directory on the system where you have installed the Probe component on systems running Windows. On systems running Linux, copy the delldevice_int_mttrapdprobe.ver version file to the $OMNIHOME directory.

6 Restart the OMNIbus MTTrapd SNMP probe service (NCOMTTRAPDProbe) or process (nco_p_mttrapd).

Installing ObjectServer Integration The objectserver_integration folder contains the following files and folder:

OMNIbus81

delldevice_confpack_64bit_v_3_0.jar

delldevice_confpack_v_3_0.jar

delldevice_int_objectserver.ver

To deploy the Dell integration components on the system that hosts the ObjectServer:

1 Run the following command with the required security credentials to access the OMNIbus ObjectServer:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running 64bit Linux:

$OMNIHOME/bin/nco_confpack -import -server -user -password -package /OMNIbus81/delldevice_confpack_64bit_v_3_0.jar

On systems running Windows:

%OMNIHOME%\bin\nco_confpack.bat -import -server -user - password -package \OMNIbus81\delldevice_confpack_v_3_0.jar

On systems running 32bit Linux:

$OMNIHOME/bin/nco_confpack -import -server -user -password -package /OMNIbus81/delldevice_confpack_v_3_0.jar

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running 64bit Linux:

$OMNIHOME/bin/nco_confpack -import -server -user -password -package /delldevice_confpack_64bit_v_3_0.jar

On systems running Windows:

%OMNIHOME%\bin\nco_confpack.bat -import -server -user - password -package \delldevice_confpack_v_3_0.jar

On systems running 32bit Linux:

$OMNIHOME/bin/nco_confpack -import -server -user -password -package /delldevice_confpack_v_3_0.jar

NOTE: By default, the ObjectServer is NCOMS.

2 In the Event List on the desktop, click File > Resync > All.

This action synchronizes the newly added menu items for the Dell tools and conversion classes that are updated from the jar files.

NOTE: Resync can be performed only for ObjectServer integration.

3 In the %OMNIHOME% directory on the system where the ObjectServer is installed, copy the delldevice_int_objectserver.ver file.

NOTE: On systems running Linux, use the $OMNIHOME directory.

4 Restart the web GUI.

Installing Dell OpenManage Connection for Netcool/OMNIbus 15

Reconfiguring Dell tools for monitoring events from Dell servers or workstations running VMware ESXi version 5.5 or later If you want to launch the RAC console from events generated from Dell servers or workstations running VMware ESXi 5.5 or later, then reconfigure the following tools:

LaunchDellOpenManageServerAdministratorConsole (Windows)

LaunchDellOpenManageServerAdministratorConsole

LaunchDellRemoteAccessControllerConsole (Windows)

LaunchDellRemoteAccessControllerConsole

To reconfigure, provide the path to the Oracle Java version 1.6.0_18 or later binary when following the steps listed below:

1 In the Configuration window, select Menu > Tools.

2 Double-click Tools on the right pane to launch the Tool details window.

3 Click the executable tab and edit the string:

For example:

For systems running Windows:

$(NCHOME)\platform\win32\jre_1.6.7\jre\bin\java to

\jre1.6.0_18\bin\java For systems running Linux:

$(NCHOME)/platform/linux2x86/jre_1.6.7/jre/bin/java to

/jre1.6.0_18/bin/java

Configuring Dell Server Administrator Web Server console on the ObjectServer The Dell Server Administrator Web Server console uses the configured URL to launch in the default browser. To configure the Web Server console URL on systems running Windows and Linux:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 On systems running Windows, double-click Launch Dell Server Administrator Web Server Console (Windows) on the right pane to launch the Tool Details window.

On systems running Linux, double-click Launch Dell Server Administrator Web Server Console on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the following URL by providing the IP address and the port number:

https:// : / omalogin.html?managedws=false&mnip=@Node

For example:

https://11.95.145.156:1311/omalogin.html?managedws=false&mnip=@Node

16 Installing Dell OpenManage Connection for Netcool/OMNIbus

For more information, see the Dell Server Administrator documentation at dell.com/support/home.

Configuring OpenManage Essentials (OME) console on the ObjectServer The OME console uses the configured URL to launch the console in the default browser. To configure the OME console URL on systems running Windows:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 Double-click Launch Dell OpenManage Essentials Console (Windows) on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the following URL by providing the IP address and the port number for OME:

https:// :

For example:

https://11.95.145.156:2607/

For more information, see the OpenManage Essentials User's Guide at dell.com/support/home.

Configuring Dell PowerVault Modular Disk Storage Manager console on the ObjectServer The Dell PowerVault Modular Disk Storage Manager (MDSM) console uses the configured URL to launch the console in a separate window. Ensure that MSDM is installed on the system on which you want to launch this console. To configure the installed path of the MDSM client on systems running Windows and Linux:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 On systems running Windows, double-click Launch Dell Modular Disk Storage Manager (Windows) on the right pane to launch the Tool Details window.

On systems running Linux, double-click Launch Dell Modular Disk Storage Manager on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the following command:

On systems running Windows:

C:\\Program Files (x86)\\Dell\\MD Storage Software\\MD Storage Manager\\client\\Modular Disk Storage Manager Client.exe

On systems running Linux:

"/opt/dell/mdstoragesoftware/mdstoragemanager/client/SMclient"

For more information, see the Modular Disk Storage Manager User's Guide at dell.com/support/home.

Configuring Dell OpenManage Network Manager (OMNM) console on the ObjectServer The Dell OpenManage Network Manager (OMNM) console uses the configured URL to launch the console in a separate window. To configure the OMNM console URL on systems running Windows and Linux:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

Installing Dell OpenManage Connection for Netcool/OMNIbus 17

3 On systems running Windows, double-click Launch OpenManage Network Manager (Windows) on the right pane to launch the Tool Details window.

On systems running Linux, double-click Launch OpenManage Network Manager on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the following URL:

http://OMNM_IP_Address_OR_Host:OMNM_Port For more information, see the OpenManage Network Manager Users Guide at dell.com/support/home.

For example:

http://192.168.10.12:8080

Configuring Dell AirWave Management Platform console on the ObjectServer The Dell AirWave Management Platform console uses the configured URL to launch the console in a default browser. To configure the Dell AirWave Management Platform console URL on systems running Windows and Linux:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 On systems running Windows, double-click Launch AirWave Management Platform Console (Windows) on the right pane to launch the Tool Details window.

On systems running Linux, double-click Launch AirWave Management Platform Console on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the following URL:

https://airwavemanagementplatform_IP_Address

Configuring Dell Connections License Manager console on the ObjectServer

The Dell Connections License Manager (DCLM) console on the Object Server uses the configured URL to launch the console in the default browser. To configure the DCLM Console URL on systems running Windows and Linux:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 On systems running Windows, double-click Launch Dell Connections License Manager Console (Windows) on the right pane to launch the Tool Details window.

On systems running Linux, double-click Launch Dell Connections License Manager Console on the right pane to launch the Tool Details window.

4 Click the executable tab and edit the IP address and the port number of the Connections License Manager following in the command:

http:// : /DellLicenseManagement For example:

http://DCLM.domain.com:8544/DellLicenceManagement

For more information, see the Dell Connections License Manager Users Guide at dell.com/support/home.

18 Installing Dell OpenManage Connection for Netcool/OMNIbus

The Dell ConfigUtility Using the Dell ConfigUtility, you can set the SNMP community string, WS-MAN parameters, and the TIPJAVAHOME parameters for

desktop and web GUI.

NOTE: Once the community string, WS-MAN, and the TIPJAVAHOME parameters are configured using the Dell ConfigUtility, the same community string is used to launch the consoles for the supported Dell devices.

Related Links:

Using the ConfigUtility for Desktop.

Using the ConfigUtility for Web GUI.

Installing Desktop Integration The desktop_integration folder for Dell devices contains the following files:

dell_config.properties

dell_MD_Array_Common.jar

dell_OMNIbus_Connection_KB_Tool_v_3_0.jar

dell_OMC_ITNO_ConfigUtility_v_3_0.jar

dell_OMC_ITNO_Helper_v_3_0.jar

intel_wsman_v_1_0_1.jar

delldevice_int_desktop.ver

snmp4j-2.3.0.jar

SYMsdk.jar

To deploy the Dell integration components on the system that hosts the desktop client:

1 Copy all the files to the %OMNIHOME% directory on the system where you have installed the desktop client:

NOTE:

On systems running Windows, use the %OMNIHOME% directory.

On systems running Linux, use the $OMNIHOME directory.

2 In the %OMNIHOME% folder on the system where you have installed the desktop client, copy the delldevice_int_desktop.ver file.

3 Configure the SNMP Community string, WS-MAN parameter and the TIPJAVAHOME parameters using the Dell ConfigUtility (dell_OMC_ITNO_ConfigUtility_v_3_0.jar). For more information, see Dell ConfigUtility.

4 Add an environment variable named OMNIBROWSER and set it to the path of the default or desired browser.

NOTE: This is applicable to systems running Windows and Linux.

Using the Dell ConfigUtility for Desktop To use the Dell ConfigUtility to set the SNMP community string, WS-MAN parameters, and the TIPJAVAHOME parameters for the Desktop:

1 Navigate to the %OMNIHOME% directory on the system where the Desktop component is installed.

2 Run the following command to configure the SNMP community string:

a For IBM Tivoli Netcool/OMNIbus 8.1:

Installing Dell OpenManage Connection for Netcool/OMNIbus 19

On systems running Windows:

%NCHOME%\platform\ \jre_1.7.0\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public On systems running Linux:

$NCHOME/platform/ /jre_1.7.0/jre/bin/java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

%NCHOME%\platform\ \jre_1.6.7\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public On systems running Linux:

$NCHOME/platform/ /jre_1.6.7/jre/bin/java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public

3 Run the following command to configure the WS-MAN parameters such as the user name and the password:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

%NCHOME%\platform\ \jre_1.7.0\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword On systems running Linux:

$NCHOME/platform/ /jre_1.7.0/jre/bin/java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

%NCHOME%\platform\ \jre_1.6.7\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword On systems running Linux:

%NCHOME%\platform\ \jre_1.6.7\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword

4 Run the following command to configure the TIPJAVAHOME parameters:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

%NCHOME%\platform\ \jre_1.7.0\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome= On systems running Linux:

$NCHOME/platform/ /jre_1.7.0/jre/bin/java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome=

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

%NCHOME%\platform\ \jre_1.6.7\jre\bin\java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome= On systems running Linux:

$NCHOME/platform/ /jre_1.6.7/jre/bin/java -Ddell.config.path=desktop - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome=

Configuring Dell Warranty Report tool on the Desktop Server The Dell Warranty Report tool can be launched from the events that are generated from the Dell device that you are monitoring and is used to retrieve the warranty information about that device.

20 Installing Dell OpenManage Connection for Netcool/OMNIbus

The Warranty Report tool should be configured on the Desktop Server if you do not have direct internet access and are using proxy settings to access the internet. In this case, on systems running Linux, ensure to resolve the host name api.dell.com in the file /etc/ host. On systems running Windows, ensure to resolve the host name api.dell.com in the file C:\Windows\System32\drivers \etc\hosts.

For example:

143.166.11.198 api.dell.com

Installing Web GUI Integration The import sub folder within the webgui_integration folder contains the following files:

cmclauncher_linux.cgi

cmclauncher_nt.cgi

compellent_linux.cgi

compellent_nt.cgi

dell_config.properties

dell_MD_Array_Common.jar

dell_OMC_ITNO_ConfigUtility_v_3_0.jar

dell_OMC_ITNO_Helper_v_3_0.jar

delldevice_int_webgui.ver

draclauncher_linux.cgi

draclauncher_nt.cgi

eqllauncher_linux.cgi

eqllauncher_nt.cgi

export.xml

idraclauncher_linux.cgi

idraclauncher_nt.cgi

intel_wsman_v_1_0_1.jar

kblauncher_linux.cgi

kblauncher_nt.cgi

n_switchadminlauncher_linux.cgi

n_switchadminlauncher_nt.cgi

omsalauncher_linux.cgi

omsalauncher_nt.cgi

snmp4j-2.3.0.jar

SYMsdk.jar

vrtxcmclauncher_linux.cgi

vrtxcmclauncher_nt.cgi

warranty_linux.cgi

warranty_nt.cgi

To deploy the Dell integration components on the system that hosts the web GUI:

1 Copy the following jar files and the dell_config.properties file from the $NCHOME/omnibus_webgui to the system where you have installed the Web GUI component.

dell_config.properties

dell_MD_Array_Common.jar

dell_OMC_ITNO_ConfigUtility_v_3_0.jar

Installing Dell OpenManage Connection for Netcool/OMNIbus 21

dell_OMC_ITNO_Helper_v_3_0.jar

delldevice_int_webgui.ver

export.xml

intel_wsman_v_1_0_1.jar

snmp4j-2.3.0.jar

SYMsdk.jar

2 Configure the SNMP Community string, WS-MAN parameters, and the TIPJAVAHOME using the Dell ConfigUtility file. For more information, see Dell ConfigUtility.

3 On the system where the web GUI component is installed, in the $NCHOME/omnibus_webgui, copy the delldevice_int_webgui.ver file.

4 Navigate to the import folder in the location where you have extracted webgui_integration folder and run the following command for each integration:

NOTE: By default, the ObjectServer is NCOMS. If your ObjectServer is anything other than NCOMS, then navigate

to the import folder, open the export.xml file and replace all occurrences of the datasource , which is NCOMS, with

the actual ObjectServer name.

For example: Change

datasource="NCOMS" to

datasource=" "

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

\waapi\bin\runwaapi -host -user - password -file export.xml On systems running Linux:

/waapi/bin/runwaapi -host -user - password -file export.xml

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

\waapi\bin\runwaapi -host -user - password -file export.xml On systems running Linux:

/waapi/bin/runwaapi -host -user - password -file export.xml

5 If the Web GUI component is installed in a non default location or a location other than %NCHOME%\..\tipv2, then configure the TIPJAVAHOME environmental path with this version of Java as follows: java -Ddell.config.path=webgui> -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar - tipjavahome= C:\Program Files (x86)\Java\jre6\bin.

For example:

If Java is installed in the location C:\Program Files (x86)\Java\jre6\bin\java.exe, then configure the TIPJAVAHOME path as

tipjavahome= C:\Program Files (x86)\Java\jre6\bin.

NOTE: If you have only installed IBM Tivoli Netcool OMNIbus in your system, then Tivoli Integrated Portal (TIP) will not be available. In this case, you can use the WebShpere home directory location while configuring the TIPJAVAHOME environmental path.

For example:

If Java is installed in the location C:\Program Files (x86)\IBM\WebSphere\AppServer\java\jre\bin\java.exe, then configure the TIPJAVAHOME path as tipjavahome= C:\Program Files (x86)\IBM\WebSphere\AppServer\java\jre\bin.

22 Installing Dell OpenManage Connection for Netcool/OMNIbus

Using the Dell ConfigUtility for Web GUI To use the Dell ConfigUtility to set the SNMP community string, WS-MAN parameters, and the TIPJAVAHOME parameters for the Web GUI:

1 Navigate to the web GUI Installation directory on the system where the web GUI component is installed.

2 Run the following command to configure the SNMP community string:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar communitystring=public

3 Run the following command to configure the WS-MAN parameters such as the user name and the password:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar wsmanusername=root wsmanpassword

4 Run the following command to configure the TIPJAVAHOME parameters:

a For IBM Tivoli Netcool/OMNIbus 8.1:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome= On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui -jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome=

b For IBM Tivoli Netcool/OMNIbus 7.4:

On systems running Windows:

\java\jre\bin\java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome=

Installing Dell OpenManage Connection for Netcool/OMNIbus 23

On systems running Linux:

/java/jre/bin/java -Ddell.config.path=webgui - jar dell_OMC_ITNO_ConfigUtility_v_3_0.jar -tipjavahome=

Updating the Dell Tools menu on the Web GUI Server To update the Dell Tools menu on the Alerts menu of the Web GUI component:

1 Perform the following steps to edit the Alert menu:

a Click Administration > Event Management Tools. b Navigate to Menu Configuration. c Select Alerts from the Available menus on the right pane. d Click Modify. e Select menu from the Available items drop-down list. f Add Dell Tools to the Current items. g Click Save.

2 Navigate to Administration > Availability > Events > Active Event List (AEL) and refresh the list to synchronize the newly added menu items.

3 Right-click a Dell device alert and make sure that the respective Dell console launch tools are available.

Configuring Dell Server Administrator Web Server console on the Web GUI To configure the Launch Dell Server Administrator Web Server console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellServerAdministratorWebServerConsole on the right pane to launch the Tool Configuration window.

4 Edit the following URL by providing the IP address and the port number:

https:// : / omalogin.html?managedws=false&mnip=@Node

For example:

https://11.95.145.156:1311/omalogin.html?managedws=false&mnip=@Node

For more information, see the Dell Server Administrator documentation at dell.com/support/home.

Configuring Dell OpenManage Essentials (OME) console on the Web GUI To configure the Launch Dell OpenManage Essentials console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellOpenManageEssentialsConsole on the right pane to launch the Tool Configuration window.

4 Edit the following URL by providing the IP address and the port number for OME:

https:// :

For example:

24 Installing Dell OpenManage Connection for Netcool/OMNIbus

https://11.95.145.156:2607/

For more information, see the OpenManage Essentials User's Guide at dell.com/support/home.

Configuring Dell PowerVault Modular Disk Storage Manager console on the Web GUI Dell PowerVault Modular Disk Storage Manager (MDSM) console must be installed on the server from where you want to launch the console. To configure the Launch Dell Modular Disk Storage Manager console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellModularDiskStorageManagerConsole on the right pane to launch the Tool Configuration window.

4 Update the following command if required:

On systems running Windows:

"%PROGRAMFILES%\Dell\MD Storage Software\MD Storage Manager\client\Modular Disk Storage Manager Client.exe"

On systems running Linux:

"/opt/dell/mdstoragesoftware/mdstoragemanager/client/SMclient"

Configuring Dell OpenManage Network Manager (OMNM) console on the Web GUI To configure the Dell OpenManage Network Manager console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellOpenManageNetworkManagerConsole on the right pane to launch the Tool Configuration window.

4 Edit the following URL by providing the IP address and the port number for OMNM:

http://OMNM_IP_Address_OR_Host:OMNM_Port

For example:

http://192.168.10.12:8080

For more information, see the OpenManage Essentials User's Guide at dell.com/support/home.

Configuring Dell AirWave Management Platform console on the Web GUI To configure the Dell AirWave Management Platform console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellAirWaveManagementPlatformConsole on the right pane to launch the Tool Configuration window.

4 Edit the following URL:

https://airwavemanagementplatform_IP_Address

Installing Dell OpenManage Connection for Netcool/OMNIbus 25

Configuring Dell Connections License Manager console on the Web GUI To configure the Launch Dell Connections License Manager (DCLM) console:

1 Log in to the web GUI.

2 Click Administration > Event Management Tools > Tool Creation.

3 Select LaunchDellConnectionsLicenseManagerConsole on the right pane to launch the Tool Configuration window.

4 Edit the following URL by providing the IP address and the port number of the Dell Connections License Manager:

http:// : /DellLicenseManagement For example:

http://DCLM.domain.com:8544/DellLicenceManagement

For more information, see the Dell Connections License Manager Users Guide at dell.com/support/manuals.

Configuring Dell Warranty Report tool on the web GUI The Dell Warranty Report tool can be launched from the events that are generated from the Dell device that you are monitoring and is used to retrieve the warranty information about that device.

The Warranty Report tool should be configured on the web GUI server if you do not have direct internet access and are using proxy settings to access the internet. In this case, on systems running Linux, ensure to resolve the host name api.dell.com in the file /etc/ host. On systems running Windows, ensure to resolve the host name api.dell.com in the file C:\Windows\System32\drivers \etc\hosts.

For example:

143.166.11.198 api.dell.com

Configuring Dell consoles on the Web GUI server on systems running Linux You must configure the Dell device specific console on the web GUI server on systems running Linux. To configure a Dell console launch tool on a system running Linux:

1 Log in to the web GUI on a system running Linux.

2 Click Administration > Event Management Tools > Tool Creation.

3 Double-click on the Dell console that you want to launch.

4 Modify the name of the CGI Script or the URL based on the Dell console you want to launch.

For more information about the Dell consoles that you must configure and their respective CGI Script or the URL see the table below.

For example:

To Launch the iDRAC console:

Navigate to Administration > Event Management Tools > Tool Creation, click LaunchDelliDRACConsole and then modify the name of the CGI Script in the URL section to idraclauncher_linux.cgi in the right pane.

26 Installing Dell OpenManage Connection for Netcool/OMNIbus

Table 9. Dell console launch tools and their respective CGI script/URL/Command

Console launch tools CGI Script/URL

Dell Server Administrator Console omsalauncher_linux.cgi Dell Server Administrator Web Server Console https:// :

Administrator Web Server PORT>/omalogin.html? managedws=false&mnip=@Node

Dell iDRAC Console idraclauncher_linux.cgi Dell Remote Access Controller Console draclauncher_linux.cgi Dell Chassis Management Controller Console cmclauncher_linux.cgi Dell Compellent Storage Manager Console compellent_linux.cgi Dell EqualLogic Group Manager Console eqllauncher_linux.cgi Dell OpenManage Switch Administrator Console n_switchadminlauncher_linux.cgi Dell OpenManage Network Manager Console http://OMNM_IP_Address_OR_Host:OMNM_Port Dell AirWave Management Platform Console https://airwavemanagementplatform_IP_Address Dell OpenManage Essentials Console https://OME_IP_Address_OR_Host:OME_Port Dell Connections License Manager http://DCLM_IP:DCLM_Port/DellLicenseManagement Dell Warranty Report warranty_linux.cgi Dell Server Trap Configuration Information kblauncher_linux.cgi

Installing Dell OpenManage Connection for Netcool/OMNIbus 27

Upgrading Dell OpenManage Connection for Netcool/OMNIbus

To upgrade the Dell OpenManage Connection for Netcool/OMNIbus:

1 Uninstall the existing connection. For more information, see the Dell OpenManage Connection for Netcool/OMNIbus Installation Guide, for the existing version, at dell.com/omconnectionsEnterpriseSystemsManagement.

2 Install the latest version using the installation procedure described in Installing Dell OpenManage Connection for Netcool/OMNIbus.

4

28 Upgrading Dell OpenManage Connection for Netcool/OMNIbus

Uninstalling Dell OpenManage Connection for Netcool/OMNIbus

To uninstall Dell OpenManage Connection for Netcool/OMNIbus you must uninstall or remove the component-specific files.

Topics:

Uninstalling Probe Integration

Uninstalling ObjectServer Integration

Uninstalling Desktop Integration

Uninstalling Web GUI Integration

Uninstalling Probe Integration To uninstall the Probe integration:

1 Navigate to the %NC_RULES_HOME%/include-snmptrap folder on the system where you have installed the Probe component.

NOTE: On systems running Linux, use the $NC_RULES_HOME/include-snmptrap folder.

2 Navigate to $NC_RULES_HOME\snmptrap-rules.file and remove the following commands:

include "$NC_RULES_HOME/include-snmptrap/dell/dell.master.include.rules" include "$NC_RULES_HOME/include-snmptrap/dell/dell.master.include.lookup"

3 Delete the dell folder under $NC_RULES_HOME/include-snmptrap.

4 Navigate to the %OMNIHOME% directory and delete the delldevice_int_mttrapdprobe.ver version file.

5 Restart the OMNIbus MTTrapd SNMP probe service (NCOMTTRAPDProbe) or process (nco_p_mttrapd).

Uninstalling ObjectServer Integration To uninstall the ObjectServer integration:

1 Provide the required security credentials to access the OMNIbus ObjectServer and log in to the ObjectServer.

2 In the Configuration window, select Menu > Tools.

3 Right-click the following tools and click Delete:

Launch Dell Server Administrator Console

Launch Dell Server Administrator Web Server Console

Launch iDRAC Console

Dell Remote Access Controller Console

Launch Dell Chassis Management Controller Console

Dell Compellent Storage Manager Console

Launch Dell Modular Disk Storage Manager Console

Launch EqualLogic Group Manager Console

Dell OpenManage Switch Administrator Console

Dell OpenManage Network Manager Console

Dell AirWave Management Platform Console

5

Uninstalling Dell OpenManage Connection for Netcool/OMNIbus 29

Launch Dell Connections License Manager Console

Dell Warranty Report

Launch OpenManage Essentials Console

Dell Server Trap Configuration Information

4 In the Configuration window, select Menu > Menus.

5 Under the Alerts Menu, select Dell Tools.

6 Right-click Dell Tools and click Delete.

7 In the Configuration window, navigate to Automation Triggers and delete the following triggers:

dell_idrac_clear

dell_idrac_deduplicate_clear

dell_omsa_clear

dell_omsa_deduplicate_clear

dell_cmc_clear

dell_cmc_deduplicate_clear

dell_compellent_clear

dell_compellent_deduplicate_clear

dell_equallogic_clear

dell_equallogic_deduplicate_clear

dell_mdarray_clear

dell_mdarray_deduplicate_clear

dell_enterprise_switch_clear

dell_enterprise_switch_deduplicate_clear

dell_nseries_clear

dell_nseries_deduplicate_clear

dell_dclm_clear

dell_dclm_deduplicate_clear

8 In the Configuration window, navigate to Visual Conversions and expand the Class menu. Right-click the following and click Delete:

Dell Server (2080)

Dell iDRAC (2088)

Dell DRAC (2087)

Dell CMC (2086)

Dell Chassis (2094)

Dell VRTX CMC (2084)

Dell Compellent Storage Arrays (2090)

Dell MD Storage Array (2809)

Dell EqualLogic (2085)

Dell Enterprise Series Switch (2091)

Dell N-Series Switch (2092)

Dell W-Series Mobility Controller (2093)

Dell DCLM (2081)

9 In the %OMNIHOME% directory on the system where the ObjectServer is installed, remove the file delldevice_int_objectserver.ver.

10 Open Event List and select File > Resync > All.

11 Restart the Web GUI.

30 Uninstalling Dell OpenManage Connection for Netcool/OMNIbus

Uninstalling Desktop Integration To uninstall the desktop integration:

1 Navigate to the %OMNIHOME% directory on the system where you have installed the desktop integration components.

2 Perform the following steps:

Remove the file delldevice_int_desktop.ver

All Desktop Integration Remove the following files:

dell_config.properties

dell_MD_Array_Common.jar

dell_OMNIbus_Connection_KB_Tool_v_2_2.jar

dell_OMC_ITNO_Helper_v_2_2.jar

dell_OMC_ITNO_ConfigUtility_v_2_2.jar

intel_wsman_v_1_0_1.jar

snmp4j-2.3.0.jar

SYMsdk.jar

Uninstalling Web GUI Integration To uninstall the Web GUI integration:

1 Login to the Web GUI.

2 Remove the following files from the webgui_integration folder.

dell_config.properties

dell_MD_Array_Common.jar

dell_OMC_ITNO_ConfigUtility_v_2_2.jar

dell_OMC_ITNO_Helper_v_2_2.jar

delldevice_int_webgui.ver

export.xml

intel_wsman_v_1_0_1.jar

snmp4j-2.3.0.jar

SYMsdk.jar

3 Navigate to Administration > Event Management Tools > Tool Creation.

4 Select the following tools and click Delete.

Launch Dell Server Administrator Console

Launch Dell Server Administrator Web Server Console

Launch iDRAC Console

Dell Remote Access Controller Console

Launch Dell Chassis Management Controller Console

Dell Compellent Storage Manager Console

Launch Dell Modular Disk Storage Manager Console

Launch EqualLogic Group Manager Console

Dell OpenManage Switch Administrator Console

Dell OpenManage Network Manager Console

Dell AirWave Management Platform Console

Launch Dell Connections License Manager Console

Dell Warranty Report

Uninstalling Dell OpenManage Connection for Netcool/OMNIbus 31

Launch OpenManage Essentials Console

Dell Server Trap Configuration Information

5 Navigate to Administration > Event Management Tools > Menu Configuration.

6 Under Available menus, select DellTools and click Delete.

7 Navigate to Administration > Event Management Tools > CGI Registry.

8 Select the following .cgi files, and then click Unregister.

idraclauncher_linux.cgi

idraclauncher_nt.cgi

draclauncher_linux.cgi

draclauncher_nt.cgi

cmclauncher_linux.cgi

cmclauncher_nt.cgi

compellent_linux.cgi

compellent_nt.cgi

eqllauncher_linux.cgi

eqllauncher_nt.cgi

n_switchadminlauncher_linux.cgi

n_switchadminlauncher_nt.cgi

omsalauncher_linux.cgi

omsalauncher_nt.cgi

warranty_linux.cgi

warranty_nt.cgi

kblauncher_linux.cgi

kblauncher_nt.cgi

9 Restart the Web GUI component.

32 Uninstalling Dell OpenManage Connection for Netcool/OMNIbus

Accessing documents from Dell Support Site You can access the required documents in one of the following ways:

Using the following links:

For all Enterprise Systems Management documents dell.com/softwaresecuritymanuals

For Enterprise Systems Management documents dell.com/openmanagemanuals

For Remote Enterprise Systems Management documents dell.com/esmmanuals

For OpenManage Connections Enterprise Systems Management documents dell.com/ OMConnectionsEnterpriseSystemsManagement

For Serviceability Tools documents dell.com/serviceabilitytools

For Client Systems Management documents dell.com/clientsystemsmanagement

For OpenManage Connections Client Systems Management documents dell.com/dellclientcommandsuitemanuals

From the Dell Support site:

a Go to dell.com/support/home.

b Under Select a product section, click Software & Security.

c In the Software & Security group box, click the required link from the following:

Enterprise Systems Management

Remote Enterprise Systems Management

Serviceability Tools

Client Systems Management

Connections Client Systems Management

d To view a document, click the required product version.

Using search engines:

Type the name and version of the document in the search box.

6

Accessing documents from Dell Support Site 33

Contacting Dell NOTE: If you do not have an active Internet connection, you can find contact information on your purchase invoice, packing slip, bill, or Dell product catalog.

Dell provides several online and tel

Manualsnet FAQs

If you want to find out how the OpenManage Connection Dell works, you can view and download the Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Dell OpenManage Connection as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Dell OpenManage Connection. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell OpenManage Connection IBM Tivoli OMNIbus V2.2 Software Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.