Contents

Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide PDF

1 of 13
1 of 13

Summary of Content for Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide PDF

Dell OpenManage Deployment Toolkit Version 5.5 Installation Guide

March 2021 Rev. A00

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

Copyright 2016 Dell Inc. All rights reserved. This product is protected by U.S. and international copyright and intellectual property laws. Dell and the Dell logo are trademarks of Dell Inc. in the United States and/or other jurisdictions. All other marks and names mentioned herein may be trademarks of their respective companies.

Chapter 1: Introduction................................................................................................................. 4 Documents you may need................................................................................................................................................. 4 Accessing support content from the Dell EMC support site.................................................................................... 4 Prerequisites......................................................................................................................................................................... 5 Deployment overview......................................................................................................................................................... 5

Deployment prerequisites for Windows PE............................................................................................................. 5 Preparing Windows PE environment for deployment...........................................................................................5 Installing Windows server Operating System using DTK..................................................................................... 6 Converting to RACADM and installing Windows server Operating System using RACADM scripts.........7 Installing Windows client operating system using DTK.........................................................................................7 Deployment prerequisites for embedded Linux...................................................................................................... 8 Preparing embedded Linux environment for deployment.................................................................................... 8 Installing Red Hat Enterprise Linux Server Operating System using DTK.......................................................9 Converting to RACADM and installing Red Hat Enterprise Linux Server Operating System using

RACADM scripts........................................................................................................................................................ 9 Installing SUSE Linux server Operating System using DTK............................................................................... 10 Converting to RACADM and installing SUSE Linux server Operating System using RACADM

scripts.......................................................................................................................................................................... 11 Installing CentOS Linux Server Operating System............................................................................................... 11

Downloading Seamless package..................................................................................................................................... 12 Upgrading your DTK version........................................................................................................................................... 13

Contents

Contents 3

Introduction The OpenManage Deployment Toolkit (DTK) includes a set of utilities, sample scripts, and sample configuration files that you can use to deploy and configure the Dell systems. You can use DTK to build script-based and RPM-based installation for deploying large number of systems on a pre-operating system environment in a reliable way, without changing their current deployment processes. Using DTK you can install operating systems on Dell systems in BIOS or Unified Extensible Firmware Interface (UEFI) mode.

Topics:

Documents you may need Accessing support content from the Dell EMC support site Prerequisites Deployment overview Downloading Seamless package Upgrading your DTK version

Documents you may need For a complete list of supported operating systems, BIOS firmware, and hardware, see the Dell Systems Software Support Matrix available at dell.com/openmanagemanuals. Dell EMC OpenManage Deployment Toolkit Command Line Interface Reference Guide Dell EMC OpenManage Deployment Toolkit Users Guide Operating system documentation

Accessing support content from the Dell EMC support site Access supporting content related to an array of systems management tools using direct links, going to the Dell EMC support site, or using a search engine. Direct links:

For Dell EMC Enterprise Systems Management and Dell EMC Remote Enterprise Systems Managementhttps:// www.dell.com/esmmanuals

For Dell EMC Virtualization Solutionshttps://www.dell.com/SoftwareManuals For Dell EMC OpenManagehttps://www.dell.com/openmanagemanuals For iDRAChttps://www.dell.com/idracmanuals For Dell EMC OpenManage Connections Enterprise Systems Managementhttps://www.dell.com/

OMConnectionsEnterpriseSystemsManagement For Dell EMC Serviceability Toolshttps://www.dell.com/serviceabilitytools

Dell EMC support site: 1. Go to https://www.dell.com/support.

2. Click Browse all products.

3. From the All products page, click Software, and then click the required link.

4. Click the required product and then click the required version.

Using search engines, type the name and version of the document in the search box.

1

4 Introduction

Prerequisites Before using DTK to deploy Microsoft Windows Pre-installation Environment (PE) or Linux environment (Red Hat Enterprise Linux or SUSE Linux Enterprise Server), ensure you have the following prerequisites:

Table 1. Prerequisites for Installation

Windows PE Environment Linux Environment

The DTK self-extracting zip file (DTKX.X-WINPE-XX.exe) available at dell.com/support.

The DTK ISO image available at dell.com/ support.

A Windows workstation that has at least 512 MB of RAM. A workstation that has at least 512 MB of RAM.

Deployment overview DTK offers a complete set of utilities, sample scripts, and RPM packages that can be used to automate the deployment of Dell systems.

Before running the deployment, ensure that you create specific deployment media to facilitate the deployment method you choose. For more information, see the Dell EMC OpenManage Deployment Toolkit Users Guide available at dell.com/ openmanagemanuals.

Deployment prerequisites for Windows PE

Before beginning the deployment process for Windows PE, ensure that you have the following tools, software, and information:

NOTE: For Microsoft WinPE and OS deployment support limitations refer to http://technet.microsoft.com/en-us/library/

hh824993.aspx.

Windows ADK for Windows Server 2012 R2 to build Windows PE 5.1 Windows ADK for Windows Server 2016 to build Windows PE 10.0 Windows ADK for Windows Server 2019 to build Windows PE 10.0 Working knowledge of Microsoft Remote Installation Services (RIS) and Automated Deployment Services (ADS) (including

setting up of RIS and ADS environments) or any other third party deployment system or tool for Windows PE. Working knowledge of Windows Deployment Services (WDS) or any other third party deployment system or tool for

Windows PE. A workstation with the following capabilities:

Writable media drive Network access

A target system with a media drive, if performing a local deployment. A target system with a media drive and network access, if performing a network deployment. All DTK utilities, sample scripts, and sample configuration files. Dell EMC OpenManage Systems Management Tools and Documentation DVD. Your operating system software and documentation. An optimally configured source system with network access.

NOTE: You can download the latest drivers from www.dell.com/support.

Preparing Windows PE environment for deployment

If you are using the Windows PE environment:

1. Copy or extract DTK utilities, sample scripts, sample configuration files, and drivers provided (in the zip file) to the Windows PE image.

2. Organize DTK utilities, script files, configuration files, the operating system installation files, and the required system files and drivers on a network share or local media.

Introduction 5

3. Set up a Source System using the Dell EMC OpenManage Systems Management Tools and Documentation DVD (to install the operating system) and the Systems Service and Diagnostics Tools (to load drivers). The Source System acts as a master server that is used to replicate settings to the Target Servers.

NOTE: Download the latest drivers from support.dell.com.

4. Generate a system BIOS, BMC, RAID, and/or RAC/iDRAC configuration profile from the Source System. Copy the generated configuration files to a read/write share on the workstation or server.

NOTE: You can obtain the system BIOS, BMC, RAID, and/or RAC/iDRAC configuration files by booting from DTK

Windows PE image and running the SYSCAP.BAT, RAIDCAP.BAT, and RACCAP.BAT scripts.

5. Create an operating system answer file that contains unattended operating system software installation information.

6. To set up the system BIOS, BMC, RAID, and RAC/iDRAC and then, install an operating system on a Target Server, edit DTK sample script files that access the system configuration files.

Installing Windows server Operating System using DTK

To install Windows Server operating system using DTK:

1. On the source system, create an operating system-specific folder. For example, WinServer_deploy.

2. Make WinServer_deploy folder shareable.

3. In the folder WinServer_deploy, create two folders sources and platform name (for example, PER740).

NOTE: The platform name must be a DTK standard name. To know the platform name, run TKENVSET.BAT located in

the x:\Dell\Toolkit\Template\Scripts directory, and then run the SET command. In the Details section, see

the DT_PLATFORM name.

4. Copy the contents of the operating system media to the sources folder.

5. In the folder PER740, create a folder Out-of-Box Drivers.

6. Boot the target system with DTK Windows PE image.

7. Check the RAID controllers on the target system using the command raidcfg ctrl.

8. Create a virtual disk using the command raidcfg ctrl ac=cvd c= -ad= .

9. From support.dell.com, download the driver for the server.

10. Copy the extracted driver file to Out-of-Box Drivers folder on the source system.

11. On the target system, to map the shared folder WinServer_deploy on to the target system, run the following command: net use z: \\ \WinServer_deploy /USER: Password:

12. Navigate to \Toolkit\Template\Configs.

13. From \Toolkit\Template\Configs, copy Unattend.xml to z:\PER740.

NOTE: The unattendw2k12.xml is for Windows Server 2012 R2 (64 bit) in BIOS mode, unattendw2k12_uefi.xml is for

Windows Server 2012 R2 (64 bit) in UEFI mode, unattendw2k16.xml is for Windows Server 2016 (64 bit) in BIOS mode,

and unattendw2k16_uefi.xml is for Windows Server 2016 (64bit) in UEFI mode, unattendw2k19.xml is for Windows

Server 2019 (64 bit) in BIOS mode, and unattendw2k19_uefi.xml is for Windows Server 2019 (64bit) in UEFI mode.

14. On the source system, navigate to PER740.

15. In Unattend.xml, check the value of DiskId in the tags ImageInstall and DiskConfiguration. The value should be zero. If the value is not zero, set it to zero.

16. On the target system, navigate to \Toolkit\template\scripts and run TKENVSET.BAT to set the DTK paths and options.

17. Set the environment variable DT_DRIVE=Z:.

18. Run the script W2K12INST.BAT or W2K16INST.BAT or W2K19INST.BAT to install the required version of the Windows Server operating system. Alternative command while running the script W2K12INST.BAT w2012r2_64 for Windows Server 2012 R2 or W2K16INST.BAT w2016_64 for Windows Server 2016 or W2K19INST.BAT w2019_64 for Windows Server 2019.

NOTE: Post OS necessary drivers are installed from LC maser partition using this command. Latest LC driver pack

should be installed while running this command.

19. Select the required operating system. The operating system installation starts and goes on unattended. After the operating system is installed, the Set Up Windows screen is displayed.

6 Introduction

Converting to RACADM and installing Windows server Operating System using RACADM scripts

To convert from DTK to RACADM deployment and to install Windows Server operating system using RACADM scripts: NOTE: Using RACADM scripts is an alternative method to install Windows server operating system. This feature is

supported on Dells 12th generation of PowerEdge Servers and later systems. For information see, Dell EMC OpenManage

Deployment Toolkit Users Guide or Dell EMC OpenManage Deployment Toolkit Command Line Interface Reference Guide

available at dell.com/openmanagemanuals .

1. Follow the steps 1 to 15 from the section Installation of Windows server operating system using DTK.

2. On the target system, navigate to \Toolkit\Tools\CONVERTER and run dtktoracadm.exe or dtktoracadm.exe windows_scripts.lst, where windows_scripts.lst is the input file which contains the list of script files to be converted to equivalent RACADM scripts.

3. The converted RACADM scripts are available in \Toolkit\Tools\CONVERTER\racscripts.

4. Navigate to \Toolkit\Tools\CONVERTER\racscripts, run the converted TKENVSET.BAT, to set the DTK paths and options.

5. Set the environment variable DT_DRIVE=Z:.

6. Run the script ( W2K12INST.BAT or W2K16INST.BAT or W2K16INST.BAT), to install the required version of Windows Server operating system. Alternative command while running the script W2K12INST.BAT w2012r2_64 for Windows Server 2012 R2 or W2K16INST.BAT w2016_64 for Windows Server 2016 or W2K19INST.BAT w2019_64 for Windows Server 2019.

NOTE: Post OS necessary drivers are installed from LC maser partition using this command. Latest LC driver pack

should be installed while running this command.

7. Select the required operating system. The operating system installation starts and goes on unattended. After the operating system is installed, the Set Up Windows screen is displayed.

Installing Windows client operating system using DTK

To install Windows client operating system using DTK:

NOTE: This feature is not supported on Dell PowerEdge MX platforms.

1. On the source system, create an operating system-specific folder. For example, WinClient_deploy.

2. Make WinClient_deploy folder shareable.

3. In the folder WinClient_deploy, create two folders sources and platform name (for example, PR7920).

NOTE: The platform name must be a DTK standard name. To know the platform name, run TKENVSET.BAT located in

the x:\Dell\Toolkit\Template\Scripts directory, and then run the SET command. In the Details section, see

the DT_PLATFORM name.

4. Copy the contents of the operating system media to the sources folder.

5. In the folder PR7920, create a folder Out-of-Box Driver.

6. Boot the target system with DTK Windows PE image.

7. Check the RAID controllers on the target system using the command raidcfg ctrl.

8. Create a virtual disk using the command raidcfg ctrl ac=cvd c= -ad= 9. From support.dell.com, download the driver for the server.

10. Copy the extracted driver file to Out-of-Box Drivers folder on the source system.

11. On the target system, to connect the target system to the shared folder WinClient_deploy, run the following command: net use z: \\ \WinClient_deploy /USER: Password:

12. Navigate to \Toolkit\Template\Configs.

13. From \Toolkit\Template\Configs, copy UnattendClient.xml to z:\PR7920.

Introduction 7

NOTE: The unattendClient.xml file is for Windows client operating system (64bit) in BIOS mode and

unattendClient_uefi.xml is for Windows client operating system (64bit) in UEFI mode.

14. On the source system, navigate to PR7920.

15. In unattendClient.xml, check the value of DiskId in the tags ImageInstall and DiskConfiguration. The value should be zero. If the value is not zero, set it to zero.

16. On the target system, navigate to \Toolkit\template\scripts and run TKENVSET.BAT to set the DTK paths and options.

17. Set the environment variable DT_DRIVE=Z:.

18. Run the WINCLIENTINST.BAT script to install the required version of Windows client operating system.

19. Select the required operating system. The operating system installation starts and goes on unattended. After the operating system is installed, the Set Up Windows screen is displayed.

Deployment prerequisites for embedded Linux

For Linux, ensure that you have the following tools, software, and information:

Advanced knowledge of Linux and Linux scripting (bash), Linux networking, installing and working with RPM Package Managers (RPMs), and creating and modifying loop file systems.

Any third party deployment system or tool, such as Yum. A workstation with the following capabilities:

A writable media drive Network access

A target system with a media drive, if performing a local deployment. A target system with a media drive and network access, if performing a network deployment. All DTK utilities, sample scripts, sample configuration files, and RPM packages. All operating system RPM packages that DTK RPMs require.

NOTE: Tools such as Yellowdog Updater Modified (YUM), Yet Another Setup Tool (YAST), and Advanced Packaging

Tool (APT) can be used to manage RPM dependency issues.

All other utilities and files necessary to perform the deployment, including all required Linux drivers, operating system drivers, and the Dell utility partition file.

Systems Management Tools and Documentation DVD. Your operating system software and documentation. An optimally configured source system with network access.

NOTE: You can download the latest drivers from support.dell.com.

NOTE: When the inbox drivers for PERC controllers and NIC cards are not available, provide the required drivers using

driver disk method.

Preparing embedded Linux environment for deployment

If you are using the embedded Linux environment:

1. Obtain the DTK Linux ISO image, which is a self-contained bootable ISO image.

2. Use and customize the sample scripts as per your requirements.

3. Set up a Source System by using the the Dell Systems Management Tools and Documentation DVD (to install your operating system) and the Systems Service and Diagnostics Tools (to load drivers).

NOTE: You can also download the latest drivers from the Dell Support website at support.dell.com.

4. Generate a system BIOS, BMC, RAID, and/or RAC/iDRAC configuration profile from the optimally configured source system. Copy the generated configuration files to a read/write share onto the workstation or server.

NOTE: You can obtain the system BIOS, BMC, RAID, and/or RAC/iDRAC configuration files by booting from DTK Linux

ISO image and running the syscap.sh, raidcap.sh, and raccap.sh scripts.

5. Create an operating system answer file that contains unattended operating system software installation information.

6. Install an operating system on a Target Server.

8 Introduction

Installing Red Hat Enterprise Linux Server Operating System using DTK

CAUTION: Do not change the bootmode before executing installation scripts using syscfg. If you do, reboot the

system and start executing installation scripts.

NOTE: See your operating system documentation for instructions on modifying the options in the ks.cfg/ks-rhelx.cfg/

ks_rhelx_uefi.cfg file to customize the scripted installation of your operating system, where x indicates the version of the

operating system.

To install Red Hat Enterprise Linux using the lininst.sh/ lininst7.sh script:

1. On the source system, navigate to the location of the required Red Hat Enterprise Linux operating system image.

2. Create a NFS share using the following command: vi /etc/exports.

3. Share /home/rhelshare.

NOTE: If the folder you want to share is /home, then the /etc/exports file must contain the /home *(rw) line.

4. Restart the NFS service.

5. Copy the operating system image to the NFS share.

6. Copy initrd.img for Red Hat Enterprise Linux to NFS share.

7. Copy vmlinuz from Red Hat Enterprise Linux operating system image to NFS share.

8. Boot DTK on the target machine.

9. Create the virtual disk using the raidcfg command.

10. Create a directory under /tmp. For example, os_src.

11. Mount the NFS Share to /tmp/os_src.

12. Copy ks.cfg/ks-rhelx.cfg (in BIOS mode) or ks_uefi.cfg/ks_rhelx_uefi.cfg (in UEFI mode) from /opt/dell/toolkit/ template/configs to NFS share on the source machine.

Here, x indicates the version of the operating system. In BIOS mode, rename the ks_rhelx.cfg to ks.cfg. In UEFI mode, rename the ks_rhelx_uefi.cfg to ks_uefi.cfg.

13. Edit ks.cfg (in BIOS mode) or ks_rhelx_uefi.cfg (in UEFI mode) on the source system, where x indicates the version of the operating system. Set the NFS IP address (where Red Hat Enterprise Linux images are available) and the NFS share path.

14. Export the environment variables as follows:

a. Run export DT_OS_DISK=/dev/sda on the disk device on which the Dell utility partition was created.

b. Run export DT_OS_SRC=/tmp/os_src where vmlinuz, initrd.img, and kickstart file are available.

c. Run export DT_HD=/dev/sda.

d. For Red Hat Enterprise Linux 7, run export DT_OS_NFS_LOC=<IP address of NFS>:/ source>.

15. Run the partcfg.sh (at /opt/dell/toolkit/template/scripts/) script to create the Dell utility partition and OS partition in BIOS or UEFI mode.

Ensure that the correct device is set to DT_HD and DT_OS_DISK..

16. From /opt/dell/toolkit/template/scripts, run /lininst.sh (for 6.x) or /lininst7.sh (for 7.x) script. The server reboots to the grub prompt. The Red Hat Enterprise Linux operating system unattended installation is initiated.

NOTE: For more information on installing, see en.community.dell.com/techcenter/systems- management/w/wiki/1772.dell-openmanage-deployment-toolkit.aspx.

Converting to RACADM and installing Red Hat Enterprise Linux Server Operating System using RACADM scripts

CAUTION: Do not change the bootmode before running installation scripts using syscfg. If you do, reboot the

system and start running installation scripts.

Introduction 9

NOTE: See your operating system documentation for instructions on modifying the options in the ks.cfg/ks- rhelx.cfg/ks_rhelx_uefi.cfg file to customize the scripted installation of your operating system, where x indicates

the version of the operating system.

NOTE: Using RACADM scripts is an alternative method to install Red Hat Enterprise Linux server operating system.

This feature is supported on Dells 12th generation of PowerEdge Servers and later systems. For information see, Dell

OpenManage Deployment Toolkit Users Guide or Dell OpenManage Deployment Toolkit Command Line Interface Reference

Guide available at dell.com/openmanagemanuals .

To convert from DTK to RACADM deployment and to install Red Hat Enterprise Linux using the lininst.sh / lininst7.sh script:

1. On the source system, navigate to the location of the required Red Hat Enterprise Linux operating system image.

2. Perform the steps 2 to 14 from the section Installing Red Hat Enterprise Linux Server Operating System using DTK.

3. From /opt/dell/toolkit/converter, run the command python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst, where linux_scripts.lst is the input file which contains the list of script files to be converted to equivalent RACADM scripts. The RACADM converted scripts are available in /opt/dell/toolkit/converter/racscripts.

4. From /opt/dell/toolkit/converter/racscripts/, run the partcfg.sh script to create the Dell utility partition and OS partition in BIOS or UEFI mode.

Ensure that the correct device is set to DT_HD and DT_OS_DISK.

5. Run /lininst.sh (for 6.x) or /lininst7.sh (for 7.x) script. The server reboots to the grub prompt. The Red Hat Enterprise Linux operating system unattended installation is initiated.

Installing SUSE Linux server Operating System using DTK

CAUTION: It is recommended that you consult your SUSE Linux Enterprise Server operating system

documentation and unattended deployment documentation to develop a thorough understanding of the

unattended installation process before attempting to perform a full scripted deployment.

NOTE: While installing Linux, ensure that you install grub in the boot partition. Otherwise, you cannot boot to the utility

partition by pressing the key during reboot.

To install SUSE Linux Enterprise Server using the suseinst.sh script:

1. On the source system, navigate to the location of the required SUSE Linux Enterprise Linux operating system image.

2. Create two NFS shares at /etc/exports, /osimage and /dtkosinstall.

3. Restart the NFS service.

4. Copy the operating system image to /osimage share.

5. Copy initrd.img and linux to /dtkosinstall share.

6. Boot DTK on the target machine.

7. Create the virtual disk using the raidcfg command.

8. Create a directory under /tmp. For example, os_src.

9. Mount the NFS share (/dtkosinstall) to /tmp/os_src.

10. Copy Sles-autoinst.xml (in BIOS mode) or Sles-autoinst_uefi.xml (in UEFI mode) from /opt/dell/ toolkit/template/configs to NFS share (/dtkosinstall) on the source machine. In BIOS mode, rename the Sles-autoinst.xml to autoinst.xml. In UEFI mode, rename the Sles-autoinst_uefi.xml to autoinst_uefi.xml.

11. Export the environment variables as follows:

a. Run export DT_OS_DISK=/dev/sda on the disk device on which the Dell utility partition was created.

b. Run export DT_OS_SRC=/tmp/os_srcwhere linux, initrd.img, and autoinst.xml/ autoinst.xml_uefi are available.

c. Run export DT_OS_PART=/dev/sda.

d. Run export DT_OS_IMG_PATH=nfs:// /osimage. e. Run export DT_SUSE_AUTOINST= nfs:// /dtkosinstall/autoinst.xml . f. Run export DT_HD=/dev/sda.

10 Introduction

12. Run partcfg.sh at (/opt/dell/toolkit/template/scripts/) to create the Dell utility partition and OS partition in BIOS or UEFI mode.

NOTE: Ensure that the correct device is set to DT_HD, DT_OS_DISK, and DT_OS_PART.

13. From /opt/dell/toolkit/template/scripts, run /suseinst.sh script. The server reboots to the grub prompt. The SUSE Linux Enterprise Linux operating system unattended installation is initiated.

Converting to RACADM and installing SUSE Linux server Operating System using RACADM scripts

CAUTION: It is recommended that you consult your SUSE Linux Enterprise Server operating system

documentation and unattended deployment documentation to develop a thorough understanding of the

unattended installation process before attempting to perform a full scripted deployment.

NOTE: While installing Linux, ensure that you install grub in the boot partition. Otherwise, you cannot boot to the utility

partition by pressing the key during reboot.

NOTE: Using RACADM scripts is an alternative method to install SUSE Linux server operating system. This feature is

supported on Dells 12th generation of PowerEdge Servers and later systems. For information see, Dell OpenManage

Deployment Toolkit Users Guide or Dell OpenManage Deployment Toolkit Command Line Interface Reference Guide

available at dell.com/openmanagemanuals .

To convert from DTK to RACADM deployment and to install SUSE Linux Enterprise Server using the suseinst.sh script:

1. On the source system, navigate to the location of the required SUSE Linux Enterprise Linux operating system image.

2. Perform the steps 2 to 11 from the section Installing SUSE Linux server Operating System using DTK.

3. From /opt/dell/toolkit/converter, run the command python dtktoracadm.py or python dtktoracadm.py linux_scripts.lst, where linux_scripts.lst is the input file which contains the list of script files to be converted to equivalent RACADM scripts. The RACADM converted scripts are available in /opt/dell/toolkit/converter/racscripts.

4. From /opt/dell/toolkit/converter/racscripts/, run the partcfg.sh script to create the Dell utility partition and OS partition in BIOS or UEFI mode.

NOTE: Ensure that the correct device is set to DT_HD, DT_OS_DISK, and DT_OS_PART.

5. Run /suseinst.sh script, from /opt/dell/toolkit/converter/racscripts. The server reboots to the grub prompt. The SUSE Linux Enterprise Linux operating system unattended installation is initiated.

Installing CentOS Linux Server Operating System

CAUTION: Do not change the bootmode before executing installation scripts using syscfg. If you do, reboot the

system and start executing installation scripts.

NOTE: See your operating system documentation for instructions on modifying the options in the ks.cfg/ks-centosx.cfg/

ks_centosx_uefi.cfg file to customize the scripted installation of your operating system, where x indicates the version of

the operating system.

To install CentOS Linux using the centinst6.sh/ centinst7.sh script:

1. On the source system, navigate to the location of the required CentOS Linux operating system image.

2. Create a NFS share using the following command: vi /etc/exports.

3. Share /home/centosshare.

NOTE: If the folder you want to share is /home, then the /etc/exports file must contain the /home *(rw) line.

4. Restart the NFS service.

Introduction 11

5. Copy the operating system image to the NFS share.

6. Copy initrd.img for CentOS Linux to NFS share.

7. Copy vmlinuz from CentOS Linux operating system image to NFS share.

8. Boot DTK on the target machine.

9. Create the virtual disk using the raidcfg command.

10. Create a directory under /tmp. For example, os_src.

11. Mount the NFS Share to /tmp/os_src.

12. Copy ks.cfg/ks-centosx.cfg (in BIOS mode) or ks_uefi.cfg/ks_centosx_uefi.cfg (in UEFI mode) from /opt/dell/ toolkit/template/configs to NFS share on the source machine.

Here, x indicates the version of the operating system. In BIOS mode, rename the ks_centosx.cfg to ks.cfg. In UEFI mode, rename the ks_centosx_uefi.cfg to ks.cfg.

13. Edit ks.cfg (in BIOS mode) or ks_centosx_uefi.cfg (in UEFI mode) on the source system, where x indicates the version of the operating system. Set the NFS IP address (where CentOS Linux images are available) and the NFS share path.

14. Export the environment variables as follows:

a. Run export DT_OS_DISK=/dev/sda on the disk device on which the Dell utility partition was created.

b. Run export DT_OS_SRC=/tmp/os_src where vmlinuz, initrd.img, and kickstart file are available.

c. Run export DT_HD=/dev/sda.

d. For CentOS 7.x , run export DT_OS_NFS_LOC= :/ . 15. Run the partcfg.sh (at /opt/dell/toolkit/template/scripts/) script to create the Dell utility partition and OS

partition in BIOS or UEFI mode.

Ensure that the correct device is set to DT_HD and DT_OS_DISK..

16. From /opt/dell/toolkit/template/scripts, run /centinst6.sh or /centinst7.sh. The server reboots to the grub prompt. The CentOS Linux operating system unattended installation is initiated .

NOTE: For more information on installing, see en.community.dell.com/techcenter/systems- management/w/wiki/1772.dell-openmanage-deployment-toolkit.aspx.

Downloading Seamless package The DTK seamless package is a single installer package which carries Linux DTK RPMs (RHEL, SLES) and its dependency. Seamless package auto recognizes the OS type and its respective dependency during the installation and installs SYSCFG, RAIDCFG and RACADM tools on Linux post operating system. The size of the DTK tools seamless package is less (60MB) compared to that of the complete OM DVD contents size.

DTK seamless package is posted independently on www.dell.com/support in conjunction with OM releases.

The seamless package supports both interactive and non-interactive mode of DTK tool installation.

Interactive mode options to install are:

Deployment Tools Install Utility Available install options: [ ] 1. Command line BIOS configuration utility (syscfg utility) [ ] 2. Command line RAID configuration utility (raidcfg utility) [ ] 3. DRAC command line configuration utility [ ] 4. All features Enter the number to select/deselect (toggle selection) a component Enter i to install the selected components. Enter q to quit. Once the DTK tools installation is complete, the same is displayed on the screen.

To uninstall, run the command

/opt/dell/toolkit/bin/dtktools-uninstall.sh d Non-interactive mode option:

12 Introduction

Run the following command, to installs all the available tools. Any other option is ignored.

./DTKTOOLS_ _Linux64_ .Bin f [-- force] Provides the help option in the command line

./DTKTOOLS_ _Linux64_ .Bin h [-- help] Once the DTK tools installation is complete, the same is displayed on t

Manualsnet FAQs

If you want to find out how the OpenManage Connection Dell works, you can view and download the Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide on the Manualsnet website.

Yes, we have the Installation Guide for Dell OpenManage Connection as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Installation Guide should include all the details that are needed to use a Dell OpenManage Connection. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell OpenManage Connection Deployment Toolkit V5.5 Software Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.