Contents

Dell VEP4600 16 Core Networking Solution Tray Guide PDF

1 of 30
1 of 30

Summary of Content for Dell VEP4600 16 Core Networking Solution Tray Guide PDF

Dell Technologies Rail, Bracket, and Tray Guide November 2022

November 2022 Rev. A04

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid

the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2021 - 2022 Dell Inc. or its subsidiaries. All rights reserved. Dell Technologies, Dell, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

Chapter 1: Rails............................................................................................................................. 4 Rack rails................................................................................................................................................................................4 Rack rails technical details............................................................................................................................................... 12

Chapter 2: Brackets..................................................................................................................... 14 Brackets............................................................................................................................................................................... 14 Brackets technical details............................................................................................................................................... 22

Chapter 3: Trays..........................................................................................................................24 Trays.....................................................................................................................................................................................24 Trays technical details......................................................................................................................................................26

Chapter 4: Quick reference..........................................................................................................27

Chapter 5: Dell support............................................................................................................... 30

Contents

Contents 3

Rails The following sections describe Dell EMC Networking rack rails.

Topics:

Rack rails Rack rails technical details

Rack rails For a list of switching equipment with appropriate rails, see the Quick reference section.

Table 1. Rails

Abbreviation Rail description Rack height

Part number

SKU Additional information

1U-S-RR Standard ReadyRail (1) 1U N243X 770-BBGY, 770-BDRL

Standard Dell ReadyRail mounting slides. A5. For a 434 mm (17.08 in) wide switch.

1U-R-RR Reversible ReadyRail 1U J9CKF 770-BCFQ Standard Dell ReadyRail where the rails can be reversed. For a 434 mm (17.08 in) wide switch. Bi-directional Ingress/Egress switch

installation (Install from either front or rear of rack).

In-rail power cord routing access and cord stabilizer (for example, route power cord through egress spot in the rail itself).

1U-M-RR Modified ReadyRail 1U HRTVK 770-BCIN Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span.

2U-S-RR Standard ReadyRail (1) 2U 6CJRH 770-BBJF Standard B9 ReadyRail mounting slides. Use with the Z9264F-ON, S6100-ON, or S5296-ON products.

2U-E-RR Extended ReadyRail 2U NKFHM 575-BBMQ Must be used with the standard B9 ReadyRail but built specifically for reverse- install scenarios. Permits an extra 9 face offset to align with longer servers.

1U-Z93xx-RR Z9332F-ON ReadyRail 1U 08P6H 770-BDKS Use with a 438.5 mm (17.26 in) wide switch. Uses a different screw placement from the standard ReadyRails. The rack span is 17.18 to 32.30 inches (436.4 mm to 820.4 mm).

1U-S52- S41-12-4P

S5212F-ON & S4112-ON Series rails. Use with the S5212F-ON dual-tray.

1U TTVK9 N/A Use these rails with the S5212F-ON or S4112-ON Series dual-trays in four-post installations.

1U-EMC-3.14- RR

EMC Gen3.14 bezel rails 1U 19T1K N/A EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 434 mm (17.08 in) wide switch.

1

4 Rails

Table 1. Rails (continued)

Abbreviation Rail description Rack height

Part number

SKU Additional information

558.8 mm, 711.2 mm, or 787.4 mm (22 in, 28 in, or 31 in) offset

558.8 mm to 863.6 mm (22 in to 34 in) rack span

1U-EMC-3-RR EMC Gen 3 bezel rails 1U V45CP N/A EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 434 mm (17.08 in) wide switch. 558.8 mm, 711.2 mm, or 787.4 mm (22

in, 28 in, or 31 in) offset. 558.8 mm to 863.6 mm (22 in to 34 in)

rack span.

2U-EMC- Z92xx-RR

Z9264F-ON bezel rails for EMC 2RU Gen3.14/Gen3 bezel

2U 150-042- 005

N/A Platform-specific rails used with Gen 3.14 or Gen 3 bezel rails. Use these EMC rails with rear-mount (I/O-side of the switch faces the back of the rack), four-post racks. 558.8 mm, 711.2 mm, or 787.4 mm (22

in, 28 in, or 31 in) offset. 558.8 mm to 914 mm (22 in to 36 in)

rack span.

1U-DN-RR Z9432F-ON & S5448F- ON Special ReadyRails

1U TDYXP 770-BDYT For a 438.5 mm (17.26 in) wide switch. Four-post rack-mount installations. 539.7 mm to 1041.4 mm (21.25 in to 41

in) rack span.

2U-DN-RR Z9664F-ON ReadyRails 2U N7WVX N/A Platform-specific ReadyRail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch. 558.8 mm to 1066.8 mm (22 in to 42

in) rack span.

2U-DN-4P Z9664F-ON Special Rail kit

2U JGF0H N/A Platform-specific 4 Post bracket Rail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch. 584.2 mm to 787.4 mm (23 in to 31 in)

rack span.

2U-EMC-RR Z9664F-ON EMC Rail kit 2U JC5HG N/A Platform-specific rails used with Gen 3.14 or Gen 3 RU bezel. Use these EMC rails with rear-mount (I/O-side of the switch faces the back of the 4 post rack). 711.2 mm, or 787.4 mm (28 in, or 31 in)

offset. 558.8 mm to 914 mm (22 in to 36 in)

rack span.

1U-DN-RR- Reversible

Z9432F-ON & S5448F- ON Special ReadyRails

1U X54PT N/A For a 438.5 mm (17.26 in) wide switch. Four-post rack-mount installations. 560 mm to 877 mm (22 in to 34.5 in)

rack span.

1U-EMC- Gen3/3.14-RR

EMC Gen3/3.14 bezel rails for S5448F-ON, Z9332F- ON, and Z9432F-ON

1U 6DWDR N/A EMC rails to use in rear-mount (I/O-side of the switch faces the back of the rack) four-post racks. Use with a 438.5 mm (17.26 in) wide switch. 711.2 mm or 787.4 mm (28 in or 31 in)

offset

Rails 5

Table 1. Rails (continued)

Abbreviation Rail description Rack height

Part number

SKU Additional information

558.8 mm to 863.6 mm (22 in to 34 in) rack span

(1) Extended NEBS "Deep rack" rails for 2RU switches available upon request.

1U-S-RR: 1RU Standard ReadyRail (N243X)

Use with a 434 mm (17.08 in) wide switch.

1U-R-RR: 1RU Reversible ReadyRail (J9CKF)

Bidirectional Ingress/Egress. In-rail power cord route access and stabilizer. Use with a 434 mm (17.08 in) wide switch.

1U-M-RR: 1RU Modified ReadyRail (Nokia-specific rail) (HRTVK)

Similar to the Standard ReadyRail but with the stop removed. Supports a 450 mm to 793 mm (17.72 in to 31.2 in)-rack span.

6 Rails

2U-S-RR: 2RU Standard ReadyRail (6CJRH)

Use with the Z9264F-ON, S6100-ON, or S5296-ON products.

2U-E-RR: 2RU ReadyRail Extension kit (NKFHM)

For reverse-install scenarios. Permits an extra 9 face offset to align with longer servers.

NOTE: Must be used with the standard ReadyRail kit, B9.

1U-Z93xx-RR: Z9332F-ON ReadyRails (08P6H)

For four-post racks.

Rails 7

1U-S52-S41-12-4P: S5212F-ON or S4112-ON Series rails (TTVK9)

For four-post racks. Use with the S5112F-ON or S4112-ON Series dual-trays.

1U-EMC-3.14-RR: EMC Gen3.14 bezel rails (19T1K)

For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation. 22 in, 28 in, or 31 in offset (558.8 mm, 711.2 mm, or 787.4 mm offset). The rack span is 22 in to 34 in (558.8 mm to 863.6 mm wide). Use with a 434 mm (17.08 in) wide switch.

1U-EMC-3-RR: EMC Gen 3 bezel rails (V45CP)

For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation. 22 in, 28 in, or 31 in offset (558.8 mm, 711.2 mm, or 787.4 mm offset). The rack span is 22 in to 34 in (558.8 mm to 863.6 mm). Use with a 434 mm (17.08 in) wide switch.

8 Rails

2U-EMC-Z92xx-RR: Z9264F-ON rails for EMC 2RU Gen 3.14/Gen 3 bezel (150-042-005)

1U-DN-RR: Z9432F-ON & S5448F-ON Special ReadyRails (TDYXP)

Four-post rack. Rack span is 21.25 in to 41 in (539.7 mm to 1041.4 mm).

2U-DN-RR: Z9664F-ON ReadyRails (N7WVX)

Platform-specific ReadyRail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch. Rack span is 22 in to 42 in (558.8 mm to 1066.8 mm).

Rails 9

2U-DN-4P: Z9664F-ON Special Rails (JGF0H)

Platform specific Four-post bracket rail. Use with a 438.5 mm (17.26 in) wide, 2 RU switch. Rack span is 23 in to 31 in (584.2 mm to 787.4 mm).

2U-EMC-RR: Z9664F-ON EMC Rail kit (JC5HG)

Platform-specific rails used with Gen 3.14 or Gen 3 RU bezel. Use these EMC rails with rear-mount (I/O-side of the switch faces the back of the 4 post rack) 28 in, or 31 in offset (711.2 mm, or 787.4 mm). Rack span is 22 in to 36 in (558.8 mm to 914 mm).

10 Rails

1U-DN-RR-Reversible: Z9432F-ON & S5448F-ON Special ReadyRails (X54PT)

Platform specific ReadyRails Four-post rack-mount installations. Use with a 438.5 mm (17.26 in) wide switch. Rack span is 22 in to 34.5 in (560 mm to 877 mm).

1U-EMC-Gen3/3.14-RR: EMC Gen3/3.14 bezel rails for S5448F-ON, Z9332F-ON, and Z9432F-ON (6DWDR)

For rear-mount (I/O-side of the switch faces the back of the rack) four-post rack installation.

Rails 11

28 in or 31 in offset (711.2 mm or 787.4 mm offset). The rack span is 22 in to 34 in (558.8 mm to 863.6 mm wide). Use with a 438.5 mm (17.26 in) wide switch. S5448F-ON, Z9332F-ON, and Z9432F-ON

Rack rails technical details

Table 2. Rack types supported

Product Two-post square support

Two-post round support

Two-post threaded support

Four-post square support

Four-post round support

Four-post threaded support

1U-S-RR Yes: not recommended

Yes: not recommended

Yes: not recommended

Yes Yes Yes

1U-R-RR Yes: not recommended

Yes: not recommended

Yes: not recommended

Yes Yes Yes

1U-M-RR Yes: not recommended

Yes: not recommended

Yes: not recommended

Yes Yes Yes

2U-S-RR No No No Yes Yes Yes

2U-E-RR No No No Yes Yes Yes

1U-Z93xx-RR No No No Yes Yes Yes

1U-S52- S41-12-4P

No No No Yes Yes Yes

1U-EMC-3.14- RR

No No No Yes Yes Yes

1U-EMC-3-RR No No No Yes Yes Yes

2U-EMC-Z92xx- RR

No No No Yes Yes Yes

1U-DN-RR No No No Yes Yes Yes

2U-DN-RR No No No Yes Yes Yes

2U-DN-4P No No No Yes Yes Yes

2U-EMC-RR No No No Yes Yes Yes

1U-DN-RR- Reversible

No No No Yes No No

1U-EMC- Gen3/3.14-RR

No No No Yes Yes Yes

Table 3. Rail adjustability range

Product Square minimum

Square maximum

Round minimum

Round maximum

Threaded minimum

Threaded maximum

1U-S-RR 470 770 456 763 462 794

1U-R-RR 572 770 560 763 580 794

1U-M-RR 450 770 450 763 450 794

2U-S-RR 595 914 581 907 595 929

2U-E-RR 595 914 581 907 595 929

1U-Z93xx-RR 457 787 457 787 457 787

12 Rails

Table 3. Rail adjustability range (continued)

Product Square minimum

Square maximum

Round minimum

Round maximum

Threaded minimum

Threaded maximum

1U-S52- S41-12-4P

660.4 812.8 660.4 812.8 660.4 812.8

1U-EMC-3.14- RR

558.8 863.6 558.8 863.6 558.8 863.6

1U-EMC-3-RR 558.8 863.6 558.8 863.6 558.8 863.6

2U-EMC-Z92xx- RR

558.8 914 558.8 914 558.8 914

1U-DN-RR 539.7 1041.4 539.7 1041.4 539.7 1041.4

2U-DN-RR 558.8 1066.8 558.8 1066.8 558.8 1066.8

2U-DN-4P 584.2 787.4 584.2 787.4 584.2 787.4

2U-EMC-RR 558.8 914 558.8 914 558.8 914

1U-DN-RR- Reversible

560 877 N/A N/A N/A N/A

1U-EMC- Gen3/3.14-RR

558.8 863.6 558.8 863.6 558.8 863.6

Rails 13

Brackets The following sections describe Dell EMC Networking brackets. Brackets are used with rack-, wall-, or ceiling-mount installations.

Topics:

Brackets Brackets technical details

Brackets

For a list of switching equipment with appropriate brackets, see the Quick reference section.

Table 4. Brackets

Abbreviation Rail description Rack height

Part number

SKU Additional information

1U-4P-BR Four-post brackets 1U G46RV 770- BCGP, 770-BDRI, 770-BDLC

For a 434-mm (17.08-in) wide switch, four- post mount. Requires mounting screws. Also works with VEP4600.

1U-2P-BR Two-post brackets 1U 5PX47 770-BCGL For a 434-mm (17.08-in) wide switch, 5-in offset, two-post mount. Requires mounting screws. Also works with VEP4600.

WM-XSer- NSer-BR

X- and N-Series wall-mount brackets

N/A 9JM64 575- BBNW

Wall-mount brackets for the N1108T-ON, N1108P-ON, X1018, X1026, X1052, or X4012 products. Does not work with X1108.

1U-NSer-BR N-Series rack-mount brackets

1U HCDHT 575-BBJS Rack-mount brackets for the N1124T/P- ON, N1148T/P-ON, N2024/P, N2048/P, N1524/P, or N1548/P products.

1U-Xser-Nser- Sser-BR

X-, N-, and S-Series rack- mount brackets

1U 7YYKH 575-BBEE Rack-mount brackets for the X1018, X1018P, X1026, X1026P, X4012, N1108P/T, N1108EP, S4112F-ON, or S5212F-ON products.

1U-Z93xx-BR Z9332F-ON four-post brackets

1U RVH5J 770-BDRV Use in a four-post rack. Rack span is 27.56 to 35.83 inches (700 mm to 910 mm).

1U-N22-N32- BR

N2200-ON / N3200-ON / E3200-ON Series MPS-3S flush-mount or offset- mount brackets

1U 2V6KK 770-BDLH Brackets for MPS-3S two-post flush-mount or 5-in offset (127-mm offset) mount installations. Does not work with N3208PX- ON.

1U-N22-N32- FM-BR

N2200-ON / N3200-ON / E3200-ON Series MPS-1S flush-mount, offset-mount, or rear-mount brackets

1U PR8P0 770-BDLF, 770- BDKW

Brackets for the MPS-1S two-post flush-, 5-in offset- (127-mm offset), or rear-mount installations. Does not work with N3208PX- ON.

WM-N22- N32-WM-BR

N2224-ON / N3224-ON/ E3224-ON MPS-1S and 24- port wall-mount brackets

N/A 1DHH0 770- BDLG, 575-BCFL

Brackets for the N2224-ON 24-port or N3224-ON / E3224-ON 24-port switches and MPS-1S wall-mount installations. Does not work with N3208PX-ON.

2

14 Brackets

Table 4. Brackets (continued)

Abbreviation Rail description Rack height

Part number

SKU Additional information

WM- N320xPC- WM-BR

N3208PX-ON Wall-mount brackets

N/A TK3JM 750-ACPV N3208PX-ON wall-mount bracket.

WM- N3208PX- DIN-WM-BR

N3208PX-ON DIN rail- mount bracket

N/A YP5PR 770- BDKY, 575-BCFH

Use with TK3JM for special rail mount.

1U- N3208PX-2P- BR

N3208PX-ON rack-mount brackets

1U C94XW 770-BDLE, 575-BCFK

N3208PX-ON two-post flush-mount and offset-mount installations.

BR-N3208PX- E-BAT-BR

N3208PX-ON external power adapter battery holder

N/A N8JNG 264- BBBN, 575-BCFI

External power adapter (EPA) holder for the N3208PX-ON switch.

1U-N3208P- E-2BAT-BR

N3208PX-ON external power adapter two-battery holder brackets

1U 39VWT 770- BDLB, 770-BDRN

Use with two external power adapter holder, two-post flush-mount and offset-mount installations.

1U-N3208PX- E-BAT-2P-BR

N3208PX-ON external power adapter one-battery for two-post mount

1U MR8H4 770- BDRO, 770-BDKZ

External power adapter holder for one N3208PX-ON switch and one battery in a 1RU two-post installation.

2U-N3208P- E-2BAT-2P- BR

N3208PX-ON external power adapter two-battery for two-post mount

2U YTM40 770- BDRJ, 770-BDKX

External power adapter holder for one N3208PX-ON switch and two batteries in a 2RU two-post installation.

1U-N3208P- E-BAT-4P-BR

N3208PX-ON external power adapter one-battery for four-post mount

1U 1MJP0 770-BDRI, 770-BDLC

External power adapter holder for one N3208PX-ON switch and one battery in a 1RU four-post installation.

1U-DN-4P-BR Z9432F-ON & S5448F-ON L-brackets

1U 7PGWK 575-BCHY Platform-specific four-post bracket for Z9432F-ON or S5448F-ON switches. Rack span is 22 in to 36 in (558.8 mm to 914.4 mm).

BR-VEP-WM- BR

VEP14xx, Edge 61xx, or 510 wall-mount brackets

N/A G90MW 575-BCCK For the VEP14xx, Edge 61xx, or 510 platforms.

1U-4P-BR: Four-post brackets (G46RV)

For a 434-mm (17.08-in) wide switch, four-post mount.

1U-2P-BR: Two-post brackets (5PX47)

For a 434-mm (17.08-in) wide switch, 5-in offset, two-post mount.

Brackets 15

WM-XSer-NSer-BR: X- and N-Series wall-mount brackets (9JM64)

Wall-mount brackets for the N1108T-ON, N1108P-ON, X1018, X1026, X1052, or X4012 products.

1U-NSer-BR: N-Series rack-mount brackets (HCDHT)

Rack-mount brackets for the N1124T/P-ON, N1148T/P-ON, N2024/P, N2048/P, N1524/P, or N1548/P products.

1U-Xser-Nser-Sser-BR: X-, N-, and S-Series rack-mount brackets (7YYKH)

Rack-mount brackets for the X1018, X1018P, X1026, X1026P, X4012, N1108P/T, N1108EP, S4112F-ON, or S5212F-ON products.

16 Brackets

1U-Z93xx-BR: Z9332F-ON four-post brackets (RVH5J)

1U-N22-N32-BR: N2200-ON / N3200-ON / E3200-ON Series MPS-3S flush-mount or offset-mount brackets (2V6KK)

Two-post rack. Flush-mount or 5-in offset (127-mm offset) middle-mount installations.

1U-N22-N32-FM-BR: N2200-ON / N3200-ON / E3200-ON Series MPS-1S flush-mount, offset-mount, or rear-mount brackets (PR8P0)

Two-post rack. Flush-mount, rear-mount, or 5-in offset (127-mm offset) offset-mount installations.

Brackets 17

WM-N22-N32-WM-BR: N2224-ON / N3224-ON / E3224-ON MPS-1S and 24-port wall-mount brackets(1DHH0)

WM-N320xPC-WM-BR: N3208PX-ON wall-mount bracket (TK3JM)

18 Brackets

WM-N3208PX-DIN-WM-BR: N3208PX-ON DIN rail-mount bracket (YP5PR)

1U-N3208PX-2P-BR: N3208PX-ON rack-mount brackets (C94XW)

N3208PX-ON two-post flush-mount and offset-mount brackets.

BR-N3208PX-E-BAT-BR: N3208PX-ON external power adapter battery holder (N8JNG)

Brackets 19

1U-N3208P-E-2BAT-BR: N3208PX-ON external power adapter two- battery holder brackets (39VWT)

Two EPA holder, two-post flush-mount and offset-mount brackets.

1U-N3208PX-E-BAT-2P-BR: N3208PX-ON external power adapter one-battery for two-post mount (MR8H4)

2U-N3208P-E-2BAT-2P-BR: N3208PX-ON external power adapter two-battery for two-post mount (YTM40)

20 Brackets

1U-N3208P-E-BAT-4P-BR: N3208PX-ON external power adapter one-battery for four-post mount (1MJP0)

1U-DN-4P-BR: Z9432F-ON & S5448F-ON brackets (7PGWK)

Four-post rack. Rack span is 22 in to 36 in (558.8 mm to 914.4 mm)

BR-VEP-WM-BR: VEP14xx, Edge 61xx, or 510 wall-mount brackets (G90MW)

Brackets 21

Brackets technical details

Table 5. Rack types supported

Product Two-post square support

Two-post round support

Two-post threaded support

Four-post square support

Four-post round support

Four-post threaded support

1U-4P-BR No No No Yes Yes Yes

1U-2P-BR Yes Yes Yes No No No

WM-XSer- NSer-BR

N/A N/A N/A N/A N/A N/A

1U-NSer-BR Yes Yes Yes No No No

1U-Xser-Nser- Sser-BR

Yes Yes Yes No No No

1U-Z93xx-BR No No No Yes Yes Yes

1U-N22-N32-BR Yes Yes Yes No No No

1U-N22-N32- FM-BR

Yes Yes Yes No No No

WM-N22-N32- WM-BR

No No No No No No

WM-N320xPC- WM-BR

No No No No No No

WM-N3208PX- DIN-WM-BR

N/A N/A N/A N/A N/A N/A

1U- N3208PX-2P- BR

Yes Yes Yes No No No

BR-N3208PX- E-BAT-BR

N/A N/A N/A N/A N/A N/A

1U-N3208P- E-2BAT-BR

Yes Yes Yes No No No

1U-N3208PX-E- BAT-2P-BR

Yes Yes Yes No No No

2U-N3208P- E-2BAT-2P-BR

Yes Yes Yes No N0 No

1U-N3208P-E- BAT-4P-BR

No No No Yes Yes Yes

1U-DN-4P-BR No No No Yes Yes Yes

BR-VEP-WM- BR

N/A N/A N/A N/A N/A N/A

Table 6. Bracket adjustability range

Product Square minimum

Square maximum

Round minimum

Round maximum

Threaded minimum

Threaded maximum

1U-4P-BR 609 762 609 762 609 762

1U-2P-BR N/A N/A N/A N/A N/A N/A

WM-XSer- NSer-BR

N/A N/A N/A N/A N/A N/A

22 Brackets

Table 6. Bracket adjustability range (continued)

Product Square minimum

Square maximum

Round minimum

Round maximum

Threaded minimum

Threaded maximum

1U-NSer-BR N/A N/A N/A N/A N/A N/A

1U-Xser-Nser- Sser-BR

N/A N/A N/A N/A N/A N/A

1U-Z93xx-BR 457 787 457 787 457 787

1U-N22-N32-BR N/A N/A N/A N/A N/A N/A

1U-N22-N32- FM-BR

N/A N/A N/A N/A N/A N/A

WM-N22-N32- WM-BR

N/A N/A N/A N/A N/A N/A

WM-N320xPC- WM-BR

N/A N/A N/A N/A N/A N/A

WM-N3208PX- DIN-WM-BR

N/A N/A N/A N/A N/A N/A

1U- N3208PX-2P- BR

N/A N/A N/A N/A N/A N/A

BR-N3208PX- E-BAT-BR

N/A N/A N/A N/A N/A N/A

1U-N3208P- E-2BAT-BR

N/A N/A N/A N/A N/A N/A

1U-N3208PX-E- BAT-2P-BR

N/A N/A N/A N/A N/A N/A

2U-N3208P- E-2BAT-2P-BR

660.4 812.8 660.4 812.8 660.4 812.8

1U-N3208P-E- BAT-4P-BR

N/A N/A N/A N/A N/A N/A

1U-DN-4P-BR 558.8 914.4 558.8 914.4 558.8 914.4

BR-VEP-WM- BR

N/A N/A N/A N/A N/A N/A

Brackets 23

Trays The following sections describe Dell EMC Networking rack trays.

Topics:

Trays Trays technical details

Trays

For a list of switching equipment with appropriate trays, see the Quick reference section.

Table 7. Trays

Abbreviation Rail description Rack height

Part number

SKU Additional information

1U-S41- HRACK-TR

S4112-ON fast access; half-rack, side-by-side

1U 0P7H1 770- BCQZ

Dual-tray mount for two S4112F-ON units for a four-post mount.

1U-XSer-NSer- SbS-4P-TR

X-Series or N-Series Tandem Switch Tray, holds 2x (N1108T-ON, N1108P-ON, X1018, X1026, X1026P, X4012) in 1RU, 4-post racks

1U XRN98 770- BBNQ

Default tray provisioned with four-post brackets. Tray content change requires removal of the entire tray.

Dell Networking Tandem Switch Tray, holds 2x of N1108T-ON, N1108P-ON, X1018, X1026, X1026P, X4012 in 1RU, four-post rack only.

1U-S52- SbS-4P-TR

S5212F-ON dual-tray 1U 2VMV9 770- BDGQ

Dual-tray mount for two S5212F-ON units for a four-post mount.

TR-REL- LEVR-BR

S4112F-ON or S5212F-ON release lever

N/A DKKPD Not for individual sale

Release lever to be used with the S4112F-ON or S5212F-ON dual-trays.

VEP-SbS-TR VEP14xx, Edge 61xx, or 510 dual tray

1U 8Y32N 770-- BCZE

Dual-tray mount for VEP14xx, Edge 61xx, or 510 dual tray. Front mount only. Two- or four-post, square, round, or threaded racks.

1U-S41-HRACK-TR: S4112-ON fast access - side-by-side dual-tray (0P7H1)

Default tray provisioned with four-post brackets. Tray supports optional ReadyRail sliders. Tray content change accessible from the front panel. Without cable retention bracket and clip. Rails included with tray kit. Half-rack, side-by-side mounting tray.

3

24 Trays

1U-XSer-NSer-SbS-4P-TR: X-Series or N-Series Tandem Switch Tray (XRN98)

For four-post racks. Half-rack, side-by-side mounting tray.

Default tray provisioned with four-post brackets. Tray content change requires removal of the entire tray. Holds 2x of N1108T-ON, N1108P-ON, X1018, X1026, X1026P, X4012 in 1RU, four-post rack only.

1U-S52-SbS-4P-TR: S5212F-ON Series dual-tray (2VMV9)

One RU. For four-post racks. Half-rack, side-by-side mounting tray.

TR-REL-LEVR-BR: S4112F-ON or S5212F-ON release lever (DKKPD)

Release lever to be used with the S4112F-ON or S5212F-ON dual-trays.

VEP-SbS-TR: VEP14xx, Edge 61xx, or 510 dual tray (8Y32N)

A full-rack tray.

Front mount only. Two- or four-post, square, round, or threaded racks.

Trays 25

Trays technical details

Table 8. Rack types supported

Product Two-post square support

Two-post round support

Two-post threaded support

Four-post square support

Four-post round support

Four-post threaded support

1U-S41-HRACK- TR

No No No Yes Yes Yes

1U-XSer-NSer- SbS-4P-TR

No No No Yes Yes Yes

1U-S52- SbS-4P-TR

No No No Yes Yes Yes

TR-REL-LEVR- BR

No No No Yes Yes Yes

VEP-SbS-TR Yes Yes Yes Yes Yes Yes

Table 9. Tray adjustability range

Product Square minimum

Square maximum

Round minimum

Round maximum

Threaded minimum

Threaded maximum

1U-S41-HRACK- TR

609 762 609 762 609 762

1U-XSer-NSer- SbS-4P-TR

559 762 559 762 559 762

1U-S52- SbS-4P-TR

609 762 609 762 609 762

TR-REL-LEVR- BR

N/A N/A N/A N/A N/A N/A

VEP-SbS-TR N/A N/A N/A N/A N/A N/A

26 Trays

Quick reference

The following table is a quick reference guide of abbreviations, products, and rails, brackets, or trays by Dell Technologies part number.

Table 10. Rails, brackets, or trays listed by abbreviation and Dell part number

Abbreviation Product Part Number

1RU-S-RR 1RU Standard ReadyRail N243X

1RU-R-RR 1RU Reversible ReadyRail J9CKF

1RU-M-RR 1RU Modified ReadyRail HRTVK

2U-S-RR 2RU Standard ReadyRail 6CJRH

2U-E-RR 2RU Extended ReadyRail NKFHM

1U-Z93xx-RR 1RU Z9332F-ON ReadyRail 08P6H

1U-S52-S41-12-4P 1RU S5212F-ON and S4112-ON Series rails TTVK9

1U-EMC-3.14-RR 1RU EMC Gen3.14 bezel rails 19T1K

1U-EMC-3-RR 1RU EMC Gen3 bezel rails V45CP

2U-EMC-Z92xx-RR 2RU Z9264F-ON rails for EMC 2RU Gen3.14/Gen3 bezel 150-042-005

1RU-DN-RR 1RU Z9432F-ON and S5448F-ON Special ReadyRails TDYXP

2U-DN-RR 2RU Z9664F-ON ReadyRails N7WVX

2U-DN-EMC-RR 2RU Z9664F-ON Special Rail kit JGF0H

1U-4P-BR Four-post brackets G46RV

1U-2P-BR Two-post brackets 5PX47

WM-XSer-NSer-BR X- and N-Series wall-mount brackets 9JM64

1U-NSer-BR N-Series rack-mount brackets HCDHT

1U-Xser-Nser-Sser-BR X-, N-, and S-Series rack-mount brackets 7YYKH

1U-Z93xx-BR Z9332F-ON four-post brackets RVH5J

1U-N22-N32-BR N2200-ON / N3200-ON / E3200-ON Series MPS-3S flush- mount or offset-mount brackets

2V6KK

1U-N22-N32-FM-BR N2200-ON / N3200-ON / E3200-ON Series MPS-1S flush- mount, offset-mount, or rear-mount brackets

PR9P0

WM-N22-N32-WM-BR N2224-ON / N3224-ON / E3224-ON MPS-1S and 24-port wall- mount brackets

1DHH0

WM-N320xPC-WM-BR N3208PX-ON Wall-mount brackets TK3JM

WM-N3208PX-DIN-WM-BR N3208PX-ON DIN rail-mount bracket YP5PR

1U-N3208PX-2P-BR N3208PX-ON rack-mount brackets C94XW

BR-N3208PX-E-BAT-BR N3208PX-ON external power adapter battery holder N8JNG

1U-N3208P-E-2BAT-BR N3208PX-ON external power adapter two-battery holder brackets

39VWT

4

Quick reference 27

Table 10. Rails, brackets, or trays listed by abbreviation and Dell part number (continued)

Abbreviation Product Part Number

1U-N3208PX-E-BAT-2P-BR N3208PX-ON external power adapter one-battery for two-post mount

MR8H4

2U-N3208P-E-2BAT-2P-BR N3208PX-ON external power adapter two-battery for two-post mount

YTM40

1U-N3208P-E-BAT-4P-BR N3208PX-ON external power adapter one-battery for four-post mount

1MJP0

1U-DN-4P-BR Z9432F-ON and S5448F-ON L-brackets 7PGWK

BR-VEP-WM-BR VEP14xx, Edge 61xx, 510 wall-mount brackets G90MW

1U-S41-HRACK-TR S4112-ON fast access; half-rack, side-by-side dual tray 0P7H1

1U-XSer-NSer-SbS-4P-TR X-Series or N-Series Tandem switch tray XRN98

1U-S52-SbS-4P-TR S5212F-ON Dual tray 2VMV9

TR-REL-LEVR-BR S4112F-ON or S5212F-ON release lever DKKPD

VEP-SbS-TR VEP14xx, Edge 61xx, or 510 dual tray 8Y32N

The following table lists switch equipment and the rails, brackets, or trays associated with the equipment by part number.

Table 11. Switch equipment for different rails, brackets, or trays by part number

Switch equipment Rails Brackets Trays

510 - G90MW 8Y32N

Edge61xx - G90MW 8Y32N

Gen3.14 19T1K, 150-042-005 - -

Gen3 V45CP, 150-042-005 - -

N1100 Series - 9JM64, HCDHT, 7YYKH -

N1108T/P - 7YYKH XRN98

N15xx - HCDHT -

N20xx/N30xx - HCDHT -

N22xx/N32xx N243X 2V6KK, PR8P0, 1DHH0, TK3JM

-

N3208PX - TK3JM, YP5PR, C94XW, N8JNG, 39VWT, MR8H4, YTM40, 1MJP0

-

S3048 N243X, J9CKF G46RV -

S3100 N243X G46RV -

S4048 N243X, J9CKF G46RV -

S4048T N243X, HRTVK, J9CKF G46RV -

S41xx N243X G46RV DKKPD

S4112F/T TTVK9 7YYKH 0P7H1, DKKPD

S4248 N243X G46RV -

S5148F N243X G46RV -

S52xx N243X, HRTVK, 6CJRH, J9CKF

G46RV -

S5212F-ON TTVK9 7YYKH 2VMV9, DKKPD

28 Quick reference

Table 11. Switch equipment for different rails, brackets, or trays by part number (continued)

Switch equipment Rails Brackets Trays

S5448F TDYXP, X54PT 7PGWK -

S6100 HFX63, 6CJRH, 150-042-005 - -

VEP14xx - G90MW 8Y32N

VEP4600 N243X G46RV, 5PX47 -

X-Series - 9JM64, 7YYKH XRN98

Z9100 N243X, HRTVK, J9CKF G46RV -

Z9264F 6CJRH, 150-042-005 - -

Z9332F 08P6H RVH5J -

Z9432F TDYXP, X54PT 7PGWK -

Z9664F N7WVX, JC5HG JGF0H -

Quick reference 29

Dell support The Dell support site provides documents and tools to help you use Dell equipment and mitigate network outages. Through the support site you can obtain technical information, access software upgrades and patches, download available management software, and manage your open cases. The Dell support site provides integrated, secure access to these services.

To access the Dell support site, go to www.dell.com/support/. To display information in your language, scroll down to the bottom of the web page and select your country or region from the drop-down menu.

To obtain product-specific information, enter the 7-character Service Tag or 11-digit express service code of your switch, which is found on the pull-out tag,

Manualsnet FAQs

If you want to find out how the VEP4600 Dell works, you can view and download the Dell VEP4600 16 Core Networking Solution Tray Guide on the Manualsnet website.

Yes, we have the Tray Guide for Dell VEP4600 as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Tray Guide should include all the details that are needed to use a Dell VEP4600. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell VEP4600 16 Core Networking Solution Tray Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell VEP4600 16 Core Networking Solution Tray Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell VEP4600 16 Core Networking Solution Tray Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell VEP4600 16 Core Networking Solution Tray Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell VEP4600 16 Core Networking Solution Tray Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.