Dell 2407WFP Monitor User's Guide PDF

1 of 51
1 of 51

Summary of Content for Dell 2407WFP Monitor User's Guide PDF

Dell 2407WFP Flat Panel Monitor 

Notes, Notices, and Cautions

Information in this document is subject to change without notice.  2006 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc.is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of DellInc  Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation  Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model 2407WFP

April 2006        Rev. A03

About Your Monitor Front View

Back View

Side View

Bottom View

Monitor Specifications

Universal Serial Bus (USB) Interface

Card Reader Specifications

Plug and play capability

Caring for Your Monitor

Using Your Adjustable Monitor Stand Attaching the Stand

Organizing Your Cables

Using the Tilt, Swivel and Vertical Extension

Removing the Stand 

Setting Up Your Monitor Connecting Your Monitor

Using the Front Panel Buttons

Using the OSD

Setting the Optimal Resolution

Using the Dell Soundbar (Optional)  

Rotating Your Monitor Changing the Rotation of Your Monitor

Rotating Your Operating System

Solving Problems Monitor Specific Troubleshooting

Common Problems

Video Problems

Product Specific Problems

Universal Serial Bus (USB) Specific Problems

Dell Soundbar (Optional) Troubleshooting Card Reader Troubleshooting

Appendix FCC Identification Information

Safety Instructions

Contacting Dell

NOTE: A NOTE indicates important information that helps you make better use of your computer.

NOTICE: A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION: A CAUTION indicates a potential for property damage, personal injury, or death.

Back to Contents Page

About Your Monitor Dell 2407WFP Flat Panel Monitor 

Front View

Back View

  Front View

  Back View

  Side View

  Bottom View

  Monitor Specifications

  Universal Serial Bus(USB) Interface

  Card Reader Specifications

  Plug and play capability

  Caring for Your Monitor

1 Input indicators

2 Input Source Select

3 PIP (Picture In Picture) / PBP (Picture By Picture) Select

4 OSD Menu / Select 

5 Down (-)

6 Up (+)

7 Power button (with power light indicator)

Side View

                                    Right side

1 VESA mounting holes (100mm) (Behind attached base plate)

Use to mount the monitor.  

2 Connectors label Indicate the positions and types of connectors.

3 Barcode serial number label Refer to this label if you need to contact Dell for technical support.

4 Security lock slot Use a security lock with the slot to help secure your monitor.

5 Monitor Lock/Release Button Press to release the stand from the monitor.

6 Regulatory rating label List the regulatory approvals.

7 Dell Soundbar mounting brackets Attach the optional Dell Soundbar.

8 Lock down/release button  

Push the monitor down, press the button to unlock the monitor, and then lift the monitor to the desired height.

9 Cable management hole Help organize cables by placing them through the hole.

                                      Left side

Bottom View

Monitor Specifications

1 Card reader: for details please refer to Card Reader Specifications

2 USB downstream ports

1 AC power cord connector

2 DC power connector for Dell Soundbar

3 DVI connector

4 VGA connector

5 Composite video connector

6 S-Video connector

7 Component video connectors  

8 USB upstream port

9 USB downstream ports

General

Model number 2407WFP

Flat Panel

Screen type Active matrix - TFT LCD

Screen dimensions 24 inches (24-inch viewable image size)

Preset display area:

Horizontal 518.4 mm (20.4 inches)

Vertical 324.0 mm (12.7 inches)

Pixel pitch 0.270 mm

Viewing angle +/- 89 (vertical) typ, +/- 89 (horizontal) typ

Luminance output 450 cd/m (typ)

Contrast ratio 1000:1 (typ)

Faceplate coating Antiglare with hard-coating 3H

Backlight 6 CCFLs U-type backlight  

Response Time 6 ms typical (Grey to Grey) / 16 ms typical (Black to White) 

Resolution

Horizontal scan range 30 kHz to 81 kHz (automatic)

Vertical scan range 56 Hz to 76 Hz, exception 1920 x 1200 at 60 Hz only

Optimal preset resolution 1920 x 1200 at 60 Hz

Highest preset resolution 1920 x 1200 at 60 Hz

Video Supported Modes

Video display capabilities (DVI playback) 480p/576p/720p/1080p (Supports HDCP)

Video display capabilities (Composite playback) NTSC/PAL

Video display capabilities (S-Video playback) NTSC/PAL

Video display capabilities (Component playback) 480i/480p/576i/576p/720p/1080i

Preset Display Modes

Dell guarantees image size and centering for all preset modes listed in the following table.

Display Mode Horizontal Frequency (kHz)

Vertical Frequency (Hz) Pixel Clock (MHz) Sync Polarity (Horizontal/Vertical)

VGA, 720 x 400 31.5 70.1 28.3 -/+

VGA, 640 x 480 31.5 59.9 25.2 -/-

VESA, 640 x 480 37.5 75.0 31.5 -/-

VESA, 800 x 600 37.9 60.3 40.0 +/+

VESA, 800 x 600 46.9 75.0 49.5 +/+

VESA, 1024 x 768 48.4 60.0 65.0 -/-

VESA, 1024 x 768 60.0 75.0 78.8 +/+

VESA, 1152 x 864 67.5 75.0 108.0 +/+

VESA, 1280 x 1024 64.0 60.0 108.0 +/+

VESA, 1280 x 1024 80.0 75.0 135.0 +/+

VESA, 1600 x 1200 75.0 60.0 162.0 +/+

VESA, 1920 x 1200 74.0 60.0 154.0 +/-

Electrical

Video input signals Analog RGB, 0.7 Volts +/-5%, 75 ohm input impedance  Digital DVI-D TMDS, 600mV for each differential line, 50 ohm input impedance S-video, Y input 1 volt(p-p), C input 0.286 volt(p-p), 75 ohm input impedance Composite, 1 volt(p-p), 75 ohm input impedance Component: Y, Pb, Pr are all 0.5~1volt(p-p), 75 ohm input impedance   

Synchronization input signals separate horizontal and vertical, 3.3V CMOS or 5V TTL level, positive or negative sync. SOG (Sync on green)

AC input voltage / frequency / current 100 to 240 VAC / 50 or 60 Hz + 3 Hz / 2.0A (Max.)

Inrush current 120V: 40A (Max.) 240V: 80A (Max.)

Power Management Modes

If you have VESA's DPMS compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If activity from keyboard, mouse or other input devices is detected by the computer, the monitor will automatically "wake up". The following table shows the power consumption and signaling of this automatic power saving feature:

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Physical Characteristics

Signal cable type D-sub: Detachable, Analog, 15pin, shipped attached to the monitor DVI-D: Detachable, Digital, 24pin, shipped detached from the monitor S-video: Not included with display  Composite: Not included with display Component: Not included with display   

Dimensions (with stand):

Height (fully extended in portrait mode) 584.7 mm (23.0 inches)

Height (compressed/locked in landscape mode) 387.9 mm (15.3 inches)

Width 559.7 mm (22.0 inches)

Depth 195.0 mm (  7.7 inches)

Weight 

Monitor (Stand and Head) 8.3 Kg (18.3 lb)

Monitor Flat panel only (VESA Mode) 6.5 Kg (14.3 lb)

Weight with packaging 11.2 Kg (24.7 lb)

Environmental

Temperature:

Operating 5 to 35C (41 to 95F)

Non-operating Storage: 0 to 60C (32 to 140F) Shipping: -20 to 60C(-4 to 140F)

Humidity:

Operating 10% to 80% (non-condensing)

Non-operating Storage: 5% to 90% (non-condensing) Shipping: 5% to 90%(non-condensing)

Altitude:

Operating 3,657.6 m (12,000 ft) max

Non-operating 12,192 m (40,000 ft) max

Thermal dissipation 375.0 BTU/hour (maximum) 195.0 BTU/hour (typical)

VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption

Normal operation

Active Active Active Green 110W (maximum)* 57W (normal)**

Active-off mode Inactive Inactive Blanked Amber Less than 2 W

Switch off - - - Off Less than 1 W (at 230 V)

        * With Audio + USB       ** Without Audio + USB

This monitor is ENERGY STAR-compliant as well as TCO '99/ TCO '03 power management compatible.

Pin Assignments

VGA Connector

DVI Connector  

Pin Number

15-pin Side of the Connected Signal Cable

1 Video-Red  

2 Video-Green

3 Video-Blue

4 GND

5 Self-test

6 GND-R

7 GND-G

8 GND-B

9 Computer 5V/3.3V

10 GND-sync

11 GND

12 DDC data

13 H-sync

14 V-sync

15 DDC clock

Pin Number

24-pin Side of the Connected Signal Cable

1 TMDS RX2-

2 TMDS RX2+

3 TMDS Ground

4 Floating

5 Floating

6 DDC Clock

7 DDC Data

8 Floating

9 TMDS RX1-

10 TMDS RX1+

11 TMDS Ground

S-video Connector

Composite Video Connector

Component Video Connector

Universal Serial Bus (USB) Interface

12 Floating

13 Floating

14 +5V / +3.3V power

15 Self test 

16 Hot Plug Detect

17 TMDS RX0-

18 TMDS RX0+

19 TMDS Ground

20 Floating

21 Floating

22 TMDS Ground

23 TMDS Clock+

24 TMDS Clock-

Pin Number

5-pin Side of the Connected Signal

Cable (Cable not included)

1 GND

2 GND

3 LUMA

4 CHROMA

5 GND

Pin Number 1-pin Side of the Connected Signal Cable (cable not included)

1 LUMA COMPOSITE CHROMA

Pin Number 3-pin Side of the Connected Signal Cable (Cable not included)

1 Y (Luminance signal)

2 Pb (Color differential signal)

3 Pr (Color differential signal)

USB Upstream Connector

USB Downstream Connector

USB Ports

l 1 upstream - rear l 4 downstream - 2 on rear; 2 on left side  

Card Reader Specifications  

Overview

l The Flash Memory Card Reader is a USB storage device that allows users to read and write information from and into the memory card.  

l The Flash Memory Card Reader is automatically recognized by Windows 2000 and XP.  

l Once installed and recognized, each separate memory card (slot) appears as a separate drive/drive letter.  

l All standard file operations (copy, delete, drag-and-drop, etc.) can be performed with this drive.

This monitor supports High-Speed Certified USB 2.0 interface.

     Data Rate  Power Consumption

High speed 480 Mbps  2.5W (Max., each port)

Full speed 12 Mbps  2.5W (Max., each port)

Low speed 1.5 Mbps  2.5W (Max., each port)

Pin Number

4-pin Side of the connector

1 DMU

2 VCC

3 DPU

4 GND

Pin Number

4-Pin Side of the Signal Cable

1 VCC

2 DMD

3 DPD

4 GND

NOTE: USB 2.0 capability requires 2.0 capable computer  

NOTE: The monitor's USB interface works only when the monitor is on or in power save mode, If you switch the monitor off and then on, attached peripherals may take a few seconds to resume normal functionality.

Features

The Flash Memory Card Reader has the following features:

l Supports Windows 2000 and XP operating systems  

l No Windows 9X support from Dell  

l Mass Storage Class device (No drivers are required under Windows 2000 and XP)  

l USB-IF certification  

l Supports various memory card media

Maximum Card Capacity Supported by the 2407WFP card reader

General

Performance

Slot Number

Flash memory cards type

1 Compact Flash type I/II Card (CF I/II) / CF form factor ATA hard drives to USB 2.0 bus

2 Smart Media Card (SMC)

Memory Stick Card (MS) / High Speed Memory Stick (HSMS) / Memory Stick Pro Card (MS PRO) / Memory Stick Duo (with Adapter)

Secure Digital Card (SD)/ Mini Secure Digital (with Adapter)/ TransFlash Card (with Adapter)

MultiMedia Card (MMC) / Reduced Size MultiMedia Card (with Adapter)

Card type Support Specification Memory Card Spec Version

Max. Capacity

CF Compact Flash Specification 2.0 128GB

MS Memory Stick Standard Format Specification 1.40-00 128MB

MSPRO Memory Stick Pro Standard Format Specifications 1.01-01 32GB

MSDuo Memory Stick Duo Standard Format Specifications 1.10-00 128MB/32GB

SM

SmartMedia Electrical Specification 1.40

256MBSmartMedia Physical Format Specifications 1.40

SmartMedia Logical Format Specifications 1.30

SD SD Memory Card Specifications 1.1 4GB

MMC MultiMedia Card System Specification 3.31 4GB

NOTE: SD includes MiniSD

NOTE: MMC includes RS-MMC

Connection type USB 2.0 High Speed Device (USB Full Speed Device compatible)

Supported OS Windows 2000 and XP

Transfer Speed Read: 480 Mb/s (max.)  

Plug and Play Capability

You can install the monitor in any Plug and Play-compatible system. The monitor automatically provides the computer system with its Extended Display Identification Data (EDID) using Display Data Channel (DDC) protocols so the system can configure itself and optimize the monitor settings. If desired, the user can select different settings, but in most cases monitor installation is automatic.

Caring for Your Monitor

l To clean your antistatic screen, lightly dampen a soft, clean cloth with water. If possible, use a special screen-cleaning tissue or solution suitable for the antistatic coating. Do not use benzene, thinner, ammonia, abrasive cleaners, or compressed air.

l Use a lightly-dampened, warm cloth to clean the plastics. Avoid using detergent of any kind as some detergents leave a milky film on the plastics.   l If you notice a white powder when you unpack your monitor, wipe it off with a cloth. This white powder occurs during the shipping of the monitor. l Handle your monitor with care as darker-colored plastics may scratch and show white scuff marks more than lighter-colored monitor.   l To help maintain the best image quality on your monitor, use a dynamically changing screen saver and power off your monitor when not in use.

Back to Contents Page

  Write: 480 Mb/s (max.)

CAUTION: Read and follow the safety instructions before cleaning the monitor. 

CAUTION: Before cleaning the monitor, unplug the monitor power cable from the electrical outlet. 

Back to Contents Page

Appendix

Dell 2407WFP Flat Panel Monitor 

  FCC Identification Information

  Safety Instructions

  Contacting Dell

  Your Monitor Setup Guide

  Product Information Guide

FCC Identification Information

FCC Class B

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the manufacturers instruction manual, may cause interference with radio and television reception. This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference with radio or television reception, which can be determined by turning the equipment off and on, you are encouraged to try to correct the interference by one or more of the following measures:

l Reorient the receiving antenna. l Relocate the system with respect to the receiver. l Move the system away from the receiver. l Plug the system into a different outlet so that the system and the receiver are on different branch circuits.

If necessary, consult a representative of Dell Inc. or an experienced radio/television technician for additional suggestions.

The following information is provided on the device or devices covered in this document in compliance with the FCC regulations:

l Product name: Dell 2407WFP  l Model number: Dell 2407WFPb  l Company name:

Dell Inc. Worldwide Regulatory Compliance & Environmental Affairs One Dell Way Round Rock, Texas 78682 USA 512-338-4400

CAUTION: Safety Instructions

Read and follow these instructions when connecting and using your computer monitor:

l To help avoid damaging your computer, be sure that the voltage selection switch on the power supply for the computer is set to match the alternating current 

NOTICE: The FCC regulations provide that changes or modifications not expressly approved by Dell Inc. could void your authority to operate this  equipment.

NOTE: For Further regulatory information, see your Product Information Guide.

CAUTION: Use of controls, adjustments, or procedures other than those specified in this documentation may result in exposure to shock, electrical hazards, and/or mechanical hazards.

(AC) power available at your location:

115 volts (V)/60 hertz (Hz) in most of North and South America and some Far Eastern countries such as Japan, South Korea (also 220 volts (V)/60 hertz (Hz)), and Taiwan.

230 volts (V)/50 hertz (Hz) in most of Europe, the Middle East, and the Far East.

l Always be sure that your monitor is electrically rated to operate with the AC power available in your location.

NOTE: This monitor does not need or have a voltage selection switch for setting the AC voltage input. It will automatically accept any AC input voltage according to the ranges defined in the "Electrical Specifications" section in the User's Guide.

l Do not store or use the monitor in locations that are exposed to heat, direct sunlight, or extreme cold.

l Avoid moving the monitor between locations with large temperature differences.

l Do not subject the monitor to severe vibration or high impact conditions. For example, do not place the monitor inside a car trunk.

l Do not store or use the monitor in locations exposed to high humidity or dusty environment.

l Do not allow water or other liquids to spill on or into the monitor.

l Keep flat panel monitor in room temperature conditions. Excessive cold or hot conditions can have an adverse effect on the liquid crystal of the display.

l Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.

l To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor case.

l Never use your monitor if the power cable has been damaged. Ensure that nothing rests on your computer's cables and that the cables are not located where they can be stepped on or tripped over.

l Be sure to grasp the plug, not the cable, when disconnecting the monitor from an electric socket.

l Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered. Avoid using the monitor on a bed, sofa, rug, or other soft surface, as doing so may block the ventilation openings in the bottom of the cabinet. If you place the monitor in a bookcase or an enclosed space, be sure to provide adequate ventilation and air flow.

l Place your monitor in a location with low humidity and minimum dust. Avoid places similar to a damp basement or dusty hallway.

l Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, unplug it and contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, being sure to unplug the monitor first.

l Place the monitor on a solid surface and treat it carefully. The screen is made of glass and can be damaged if dropped or hit sharply.

l Locate your monitor near an easily accessible electric outlet.

l If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service center.

l Do not attempt to remove the back cover, as you will be exposed to an electrical shock hazard. The back cover should only be removed by qualified service personnel.

l High temperatures can cause problems. Don't use your monitor in direct sunlight, and keep it away from heaters, stoves, fireplaces, and other sources of heat.

l Unplug the monitor when it is going to be left unused for an extended period of time.

l Unplug your monitor from the electric outlet before any service is performed.

l LAMP(S) INSIDE THIS PRODUCT CONTAIN(S) MERCURY AND MUST BE RECYCLED OR DISPOSED OFF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR

MORE INFORMATION, GO TO WWW.DELL.COM/HG OR CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG.

Contacting Dell

To contact Dell electronically, you can access the following websites:

l www.dell.com l support.dell.com (technical support)

For specific web addresses for your country, find the appropriate country section in the table below.

When you need to contact Dell, use the electronic addresses, telephone numbers, and codes provided in the following table. If you need assistance in determining which codes to use, contact a local or an international operator.

  NOTE: Toll-free numbers are for use within the country for which they are listed.

  NOTE: In certain countries, support specific to Dell

TM XPS computers is available at a separate telephone number listed for participating  countries. If you do not see a telephone number listed that is specific for XPS computers, you may contact Dell through the support number listed and your call will be routed appropriately.

NOTE: The contact information provided was deemed correct at the time that this document went to print and is subject to change.

 Country (City)

International Access Code Country Code City Code

Department Name or Service Area, Website and E-Mail Address

Area Codes, Local Numbers, and Toll-Free Numbers

Anguilla

Website: www.dell.com.ai  

E-mail: la-techsupport@dell.com  

Technical Support toll-free: 800-

Antigua and Barbuda

Website: www.dell.com.ag  

E-mail: la-techsupport@dell.com  

Technical Support 1-800-

Aomen Technical Support (Dell Dimension, Dell Insprion,  Dell Optiplex, Dell Latitude, and Dell Precision)

Technical Support (servers and storage)

Argentina ( Buenos Aires )

International Access Code: 00

Country Code: 54

City Code: 11

Website: www.dell.com.ar

E-mail: la-techsupport@dell.com

E-mail: us_latin_services@dell.com

E-mail for desktop and portable computers: la-techsupport@dell.com

E-mail for servers and EMC storage products: la_enterprise@dell.com

Customer Care toll-free: 0-800-

Tech Support toll-free: 800-

Tech Support Services toll-free: 0-800-

Sales 0-810-

Aruba

Website: www.dell.com.aw  

E-mail: la-techsupport@dell.com  

Technical Support toll-free: 800

Australia ( Sydney )

International Access Code: 0011

Country Code: 61

City Code: 2

Website: support.ap.dell.com

E-mail:support.ap.dell.com/contactus

General Support 13DELL

Austria

International Access Code: 900

Country Code: 43

City Code: 1

Website: support.euro.dell.com

E-mail: tech_support_central_europe@dell.com

Home/Small Business Sales 0820 240 530 00

Home/Small Business Fax 0820 240 530 49

Home/Small Business Customer Care 0820 240 530 14

Preferred Accounts/Corporate Customer Care 0820 240 530 16

Support for XPS 0820 240 530 81

Home/Small Business Support for all other Dell computers 0820 240 530

Preferred Accounts/Corporate Support 0820 240 530 

Switchboard 0820 240 530 00

Bahamas

Website: www.dell.com.bs

E-mail: la-techsupport@dell.com  

Technical Support toll-free: 1-866-

Barbados

Website: www.dell.com/bb  

E-mail: la-techsupport@dell.com  

Technical Support 1-800-

Website: support.euro.dell.com

Belgium ( Brussels )

International Access Code: 00

Country Code: 32

City Code: 2

Technical Support for XPS 02 481 92 96

Technical Support for all other Dell computers 02 481 92 88

Technical Support Fax 02 481 92 95

Customer Care

Corporate Sales 02 481 91 00

Fax 02 481 92 99

Switchboard 02 481 91 00

Bermuda

Website: www.dell.com/bm  

E-mail: la-techsupport@dell.com  

Technical Support toll-free 1-877-890

Bolivia

Website: www.dell.com/bo

E-mail: la-techsupport@dell.com

General Support toll-free: 800

Brazil

International Access Code: 00

Country Code: 55

City Code: 51

Website: www.dell.com/br

E-mail: BRmailto:la-techsupport@dell.com

Customer Support and Tech Support 0800 90 3355

Technical Support Fax 51 2104

Customer Care Fax 51 2104 5480

Sales 0800 722 3498

British Virgin Islands General Support toll-free: 1-866-

Brunei

Country Code: 673

Technical Support ( Penang , Malaysia ) 604 633 4966

Customer Care ( Penang , Malaysia )

Transaction Sales ( Penang , Malaysia ) 604 633 4955

Canada ( North York , Ontario )

International Access Code: 011

Online Order Status: www.dell.ca/ostatus

AutoTech (automated Hardware and Warranty) toll-free: 1-800-

Customer Service (Home Sales/Small Business) toll-free: 1-800-

Customer Service (med./large business, government) toll-free: 1-800-

Customer Service (printer, projectors, televisions, handhelds, digital jukebox, and wireless) toll-free: 1-800-

Hardware Warranty Support (Home Sales/Small Business) toll-free:1-800-

Hardware Warranty Support (med./large bus., government) toll-free: 1-800-

Hardware Warrantu Support (printers,projectors, televisions, handhelds,digital jukebox, and wireless) 1-877-

Sales (Home Sales/Small Business) toll-free: 1-800-

Sales (med./large bus., government) toll-free: 1-800-

Spare Parts Sales & Extended Service Sales 1 866 440 3355

Cayman Islands E-mail: la-techsupport@dell.com  

Technical Support 1-877-261-0242

Chile ( Santiago )

Country Code: 56

City Code: 2

Website: www.dell.com/cl  

E-mail: la-techsupport@dell.com  

Sales and Customer Support toll-free: 1230-

Technical Support (CTC) toll-free: 800730222

Technical Support (ENTEL) toll-free: 1230-

China ( Xiamen )

Technical Support website: support.dell.com.cn

Technical Support E-mail: cn_support@dell.com

Customer Care E-mail: customer_cn@dell.com

Technical Support Fax 592 818 1350

Technical Support (Dimension and Inspiron) toll-free: 800 858 2969

Technical Support (OptiPlex, Latitude, and Dell  Precision) toll-free: 800 858 0950

Technical Support (servers and storage) toll-free: 800 858 0960

Technical Support (projectors, PDAs, switches, routers, and so on) toll-free: 800 858 2920

Technical Support (printers) toll-free: 800 858 2311

Customer Care toll-free: 800 858 2060

Country Code: 86

City Code: 592

Customer Care Fax 592 818 1308

Home and Small Business toll-free: 800 858 2222

Preferred Accounts Division toll-free: 800 858 2557

Large Corporate Accounts GCP toll-free: 800 858 2055

Large Corporate Accounts Key Accounts toll-free: 800 858 2628

Large Corporate Accounts North toll-free: 800 858 2999

Large Corporate Accounts North Government and Education toll-free: 800 858 2955

Large Corporate Accounts East toll-free: 800 858 2020

Large Corporate Accounts East Government and Education toll-free: 800 858 2669

Large Corporate Accounts Queue Team toll-free: 800 858 2572

Large Corporate Accounts South toll-free: 800 858 2355

Large Corporate Accounts West toll-free: 800 858 2811 

Large Corporate Accounts Spare Parts toll-free: 800 858 2621

Colombia

Website: www.dell.com/cl  

E-mail: la-techsupport@dell.com  

Technical Support 1-800-915

Costa Rica

Website: www.dell.com/cr

E-mail: la-techsupport@dell.com

Technical Support toll free: 800-

Czech Republic ( Prague )

International Access Code: 00

Country Code: 420

Website: support.euro.dell.com

E-mail: czech_dell@dell.com

Technical Support 22537 2727

Customer Care 22537 2707

Fax 22537 2714

Technical Fax 22537 2728

Switchboard 22537 2711

Denmark ( Copenhagen )

International Access Code: 00

Country Code: 45

Website: support.euro.dell.com

Technical Support for XPS 7010 0074

Technical Support for all other Dell computers 7023 0182

Customer Care (Relational) 7023 0184

Home/Small Business Customer Care 3287 5505

Switchboard (Relational) 3287 1200

Switchboard Fax (Relational) 3287 1201

Switchboard (Home/Small Business) 3287 5000

Switchboard Fax (Home/Small Business) 3287 5001

Dominica

Website: www.dell.com/dm  

E-mail: la-techsupport@dell.com  

General Support toll-free: 1-866-

Dominican Republic

Website: www.dell.com/do  

E-mail: la-techsupport@dell.com  

Technical Support

toll free: 1-888-156

toll free: 1-888-

Ecuador

Website: www.dell.com/ec  

E-mail: la-techsupport@dell.com  

General Support (calling from Quito) toll-free: 999-119 - 877-

General Support (calling from Guayaquil) toll-free: 1800-999-119 -877-

Website: www.dell.com/ec  

El Salvador E-mail: la-techsupport@dell.com  

Technical Support (Telephonica) toll free:

Finland ( Helsinki )

International Access Code: 990

Country Code: 358

City Code: 9

Website: support.euro.dell.com

E-mail: fi_support@dell.com

Technical Support 0207 533 555

Customer Care 0207 533 538

Switchboard 0207 533 533

Sales under 500 employees 0207 533 540

Fax 0207 533 530

Sales over 500 employees 0207 533 533

Fax 0207 533 530

France ( Paris ) ( Montpellier )

International Access Code: 00

Country Code: 33

City Codes: (1) (4)

Website: support.euro.dell.com

Home and Small Business

Technical Support for XPS 0825 387 129

Technical Support for all other Dell computers 0825 387 270

Customer Care 0825 823 833

Switchboard 0825 004 700

Switchboard (calls from outside of France ) 04 99 75 40 00

Sales 0825 004 700

Fax 0825 004 701

Fax (calls from outside of France ) 04 99 75 40 01

Corporate

Technical Support 0825 004 719

Customer Care 0825 338 339

Switchboard 01 55 94 71 00

Sales 01 55 94 71 00

Fax 01 55 94 71 01

Germany (Frankfurt)

International Access Code: 00

Country Code: 49

City Code: 69

Website: support.euro.dell.com

E-mail: tech_support_central_europe@dell.com

Technical Support for XPS 069 9792 7222

Technical Support for all other Dell computers 069 9792

Home/Small Business Customer Care 0180-

Global Segment Customer Care 069 9792

Preferred Accounts Customer Care 069 9792

Large Accounts Customer Care 069 9792

Public Accounts Customer Care 069 9792

Switchboard 069 9792

Greece

International Access Code: 00

Country Code: 30

Website: support.euro.dell.com

Technical Support 00800-44 14 95 18

Gold Service Technical Support 00800-44 14 00 83

Switchboard 2108129810

Gold Service Switchboard 2108129811

Sales 2108129800

Fax 2108129812

Grenada E-mail: la-techsupport@dell.com  

General Support toll-free: 1-866-

Guatemala E-mail: la-techsupport@dell.com  

General Support 1-800-

Guyana E-mail: la-techsupport@dell.com  

General Support toll-free: 1-877-

Hong Kong

International Access Code: 001

Country Code: 852

Website: support.ap.dell.com

Technical Support E-mail: HK_support@Ddell.com

Technical Support (Dimension and Inspiron) 00852-2969 3188

Technical Support (OptiPlex, Latitude, and Dell Precision) 00852-2969 3191

Technical Support (servers and storage) 00852-2969 3196

Technical Support (projectors, PDAs, switches, routers, and so on) 00852-3416 0906

Customer Care 00852-3416 0910

Large Corporate Accounts 00852-3416 0907

Global Customer Programs 00852-3416 0908

Medium Business Division 00852-3416 0912

Home and Small Business Division 00852-2969 3105

India

E-mail: india_support_desktop@dell.com india_support_notebook@dell.com india_support_Server@dell.com

Technical Support 1600 33 8045 and 1600 44 8046

Sales (Large Corporate Accounts) 1600 33 8044

Sales (Home and Small Business) 1600 33 8046

Ireland (Cherrywood)

International Access Code: 00

Country Code: 353

City Code: 1

Website: support.euro.dell.com

E-mail: dell_direct_support@dell.com

Sales

Ireland Sales 01 204 4444

Dell Outlet 1850 200 778

Online Ordering HelpDesk 1850 200 778

Customer Care

Home User Customer Care 01 204 4014

Small Business Customer Care 01 204 4014

Corporate Customer Care 1850 200 982

Technical Support

Technical Support for XPS  1850 200 722

Technical Support for all other Dell computers 1850 543 543

General  

Fax/Sales Fax 01 204 0103

Switchboard 01 204 4444

U.K. Customer Care (dial within U.K. only) 0870 906 0010

Corporate Customer Care (dail within U.K. only) 0870 907 4499

U.K. Sales (dial within U.K. only) 0870 907 4000

Italy ( Milan )

International Access Code: 00

Country Code: 39

City Code: 02

Website: support.euro.dell.com

Home and Small Business

Technical Support 02 577 826 90

Customer Care 02 696 821 14

Fax 02 696 821 13

Switchboard 02 696 821 12

Corporate

Technical Support 02 577 826 90

Customer Care 02 577 825 55

Fax 02 575 035 30

Switchboard 02 577 821  

Jamaica

E-mail: la-techsupport@dell.com  

Technical Support (dial from within Jamaica only)

toll free: 1-800-326

toll free: 1-800-

Japan ( Kawasaki )

International Access Code: 001

Country Code: 81

City Code: 44

Website: support.jp.dell.com

Technical Support (servers) toll-free: 0120

Technical Support outside of Japan (servers) 81-44-

Technical Support (Dimension and Inspiron) toll-free: 0120

Technical Support outside of Japan (Dimension and Inspiron) 81-44-

Technical Support (Dell Precision, OptiPlex, and Latitude) toll-free:0120

Technical Support outside of Japan (Dell Precision, OptiPlex, and Latitude) 81-44-

Technical Support (PDAs, projectors, printers, routers) toll-free: 0120

Technical Support outside of Japan (PDAs, projectors, printers, routers) 81-44-

Faxbox Service 044-

24-Hour Automated Order Status Service 044-

Customer Care 044-

Business Sales Division (up to 400 employees) 044-

Preferred Accounts Division Sales (over 400 employees) 044-

Public Sales (government agencies, educational institutions, and medical institutions) 044-

Global Segment Japan 044-

Individual User 044-

Switchboard 044-

Korea ( Seoul )

International Access Code: 001

Country Code: 82

City Code: 2

E-mail: Krsupport@dell.com

Support toll-free: 080-

Support (Dimension, PDA, Electronics and Accessories) toll-free: 080-

Sales toll-free: 080-

Fax 2194

Switchboard 2194

Customer Technical Support ( Austin , Texas , U.S.A. ) 512 728

Customer Service ( Austin , Texas , U.S.A. ) 512 728

Latin America Fax (Technical Support and Customer Service) ( Austin , Texas , U.S.A. ) 512 728

Sales ( Austin , Texas , U.S.A. ) 512 728

SalesFax ( Austin , Texas , U.S.A. ) 512 728-4600

or 512 728-3772

Luxembourg

International Access Code: 00

Country Code: 352

Website: support.euro.dell.com

Support 342

Home/Small Business Sales +32 (0)2 713 15 96

Corporate Sales 26 25 77 81

Customer Care +32 (0)2 481 91 19

Fax 26 25 77 82

Macao

Country Code: 853

Technical Support toll-free: 0800 105

Customer Service ( Xiamen , China ) 34 160 910

Transaction Sales ( Xiamen , China ) 29 693 115

Malaysia ( Penang )

International Access Code: 00

Country Code: 60

City Code: 4

Website: support.ap.dell.com  

Technical Support (Dell Precision, OptiPlex, and Latitude) toll-free: 1 800 880 193

Technical Support (Dimension, Inspiron, and Electronics and Accessories) toll-free: 1 800 881 306

Technical Support (PowerApp, PowerEdge, PowerConnect, and PowerVault) toll-free: 1800 881 386

Customer C are toll-free: 1 800 881 306 (option 6)

Transaction Sales toll-free: 1 800 888 202

Corporate Sales toll-free: 1 800 888 213

Mexico

International Access Code: 00

Country Code: 52

E-mail: la-techsupport@dell.com

Technical Support (TelMex) toll-free: 1-866-

Sales 50

or 01-800-

Customer Service 001-877-

or 001-877-

Main 50

or 01-800-

Montserrat E-mail: la-techsupport@dell.com  

General Support toll-free: 1-866-

Netherlands Antilles E-mail: la-techsupport@dell.com  

General Support 001-800-

Netherlands ( Amsterdam )

International Access Code: 00

Country Code: 31

City Code: 20

Website: support.euro.dell.com

Technical Support for Inspiron XPS computers only 020 674 45 94

Technical Support for all other Dell computers 020 674 45 00

Technical Support Fax 020 674 47 66

Home/Small Business Customer Care 020 674 42 00

Relational Customer Care 020 674 4325

Home/Small Business Sales 020 674 55 00

Relational Sales 020 674 50 00

Home/Small Business Sales Fax 020 674 47 75

Relational Sales Fax 020 674 47 50

Switchboard 020 674 50 00

Switchboard Fax 020 674 47 50

New Zealand

International Access Code: 00

Website: support.ap.dell.com

E-mail: support.ap.dell.com/contactus

Country Code: 64 General Support 0800 441 567

Nicaragua E-mail: la-techsupport@dell.com  

Technical Support    toll-free: 001-800

Norway (Lysaker)

International Access Code: 00

Country Code: 47

Website: support.euro.dell.com

Technical Support for XPS 815 35 043

Technical Support for all other Dell products 671 16882

Relational Customer Care 671 17575

Home/Small Business Customer Care   

Switchboard  671 16800

Fax Switchboard  671 16865

Panama

E-mail: la-techsupport@dell.com

Technical Support    toll-free: 1-800-

Technical Support (CLARACOM)

  toll-free: 1-800

Peru E-mail: la-techsupport@dell.com

Technical Support toll-free: 0800

Poland ( Warsaw )

International Access Code: 011

Country Code: 48

City Code: 22

Website: support.euro.dell.com

E-mail: pl_support_tech@dell.com

Customer Service Phone  57 95 700

Customer Care  57 95  999

Sales  57 95 999

Customer Service Fax  57 95 806

Reception Desk Fax     57 95 998

Switchboard    57 95 999

Portugal

International Access Code: 00

Country Code: 351

Website: support.euro.dell.com

Technical Support 707200149

Customer Care 800 300 413

Sales 800 300 410 or  800 300 411 or  800 300 412 or  21 422 07 10

Fax 21 424 01 12

Puerto Rico E-mail: la-techsupport@dell.com  

Technical Support toll-free: 1-866-

St. Kitts and Nevis

Website: www.dell.com/kn

E-mail: la-techsupport@dell.com

Technical Support toll-free: 1-866-

St. Lucia

Website: www.dell.com/lc

E-mail: la-techsupport@dell.com

Technical Support toll-free: 1-866-

St. Vincent and the Grenadines

Website: www.dell.com/vc

E-mail: la-techsupport@dell.com

Technical Support toll-free: 1-866-

Singapore ( Singapore )

International Access Code: 005

Country Code: 65

NOTE: The phone numbers in this section should be called from within Singapore or Malaysia only.

Website: support.ap.dell.com

Technical Support (Dimension, Inspiron, and Electronics and Accessories) toll-free: 1800 394 7430

Technical Support (OptiPlex, Latitude, and Dell Precision) toll-free: 1800 394 7488

Technical Support (PowerApp, PowerEdge, PowerConnect, and PowerVault) toll-free: 1800 394 7478

Customer Care toll-free: 1800 394 7430

Transaction Sales toll-free:  1 800 394 7412

Corporate Sales toll-free: 1 800 394 7419

Slovakia ( Prague )

International Access Code: 00

Country Code: 421

Website: support.euro.dell.com

E-mail: czech_dell@dell.com

Technical Support 02  5441 5727

Customer Care 420  22537 2707

Fax 02  5441 8328

Tech Fax 02  5441 8328

Switchboard (Sales) 02  5441 7585

South Africa ( Johannesburg )

International Access Code:

09/091

Country Code: 27

City Code: 11

Website: support.euro.dell.com

E-mail: dell_za_support@dell.com

Gold Queue 011  709 7713

Technical Support 011 709 7710

Customer Care 011 709 7707

Sales 011 709 7700

Fax 011 706 0495

Switchboard 011 709 7700

Southeast Asian and Pacific Countries Technical Support, Customer Service, and Sales ( Penang , Malaysia ) 604 633 4810

Spain ( Madrid )

International Access Code: 00

Country Code: 34

City Code: 91

Website: support.euro.dell.com

Home and Small Business

Technical Support 902 100 130

Customer Care 902 118 540

Sales 902 118 541

Switchboard 902 118 541

Fax 902 118 539

Corporate

Technical Support 902 100 130

Customer Care 902 115 236

Switchboard 91 722 92 00

Fax 91 722 95 83

Sweden (Upplands Vasby)

International Access Code: 00

Country Code: 46

City Code: 8

Website: support.euro.dell.com

Technical Support for XPS 0771 340 340

Technical Support for all other Dell products 08 590 05 199

Relational Customer Care 08 590 05 642

Home/Small Business Customer Care 08 587 70 527

Employee Purchase Program (EPP) Support 020 140 14 44

Technical Support Fax 08 590 05 594

Sales 08 590 05 185

Switzerland ( Geneva )

International Access Code: 00

Country Code: 41

City Code: 22

Website: support.euro.dell.com

E-mail: Tech_support_central_Europe@dell.com

Technical Support for XPS 0848 33 88 57

Technical Support (Home and Small Business) for all other Dell products 0844 811 411

Technical Support (Corporate) 0844 822 844

Customer Care (Home and Small Business) 0848 802 202

Customer Care (Corporate) 0848 821 721

Fax 022 799 01 90

Switchboard 022 799 01 01

Taiwan

International Access Code: 002

Website: support.ap.dell.com

E-mail: ap_support@dell.com

Technical Support (OptiPlex, Latitude, Inspiron, Dimension, and Electronics and Accessories) toll-free: 00801 86 1011

Technical Support (servers and storage) toll-free: 00801 60 1256  

Country Code: 886 Customer Care toll-free: 00801 60 1250

Transaction Sales toll-free: 00801 65 1228

Corporate Sales toll-free: 00801 651 227

Thailand

International Access Code: 001

Country Code: 66

Website: support.ap.dell.com

Technical Support (OptiPlex, Latitude, and Dell Precision) toll-free: 1800 0060 07

Technical Support (PowerApp, PowerEdge, PowerConnect, and PowerVault) toll-free: 1800 0600 09 

Customer Care toll-free: 1800 006 007

Corporate Sales toll-free: 1800 006 009

Transaction Sales toll-free: 1800 006 006

Trinidad/Tobago

Website: www.dell.com/tt  

E-mail: la-techsupport@dell.com  

Technical Support toll-free: 1-888-

Turks and Caicos Islands

Website: www.dell.com/tc  

E-mail: la-techsupport@dell.com  

General Support toll-free: 1-877-

U.K. ( Bracknell )

International Access Code: 00

Country Code: 44

City Code: 1344

Website: support.euro.dell.com

E-mail: dell_direct_support@dell.com

Customer Care website: support.euro.dell.com/uk/en/ECare/Form/Home.asp

Sales  

Home and Small Business Sales 0870 907 4000

Corporate/Public Sector Sales 01344 860 456

Customer Care  

Home and Small Business Customer Care 0870 906 0010

Corporate Customer Care 01344 373 185

Preferred Accounts (500-5000 employees) Customer Care 0870 906 0010

Global Accounts Customer Care 01344 373 186

Central Government Customer Care 01344 373 193

Local Government & Education Customer Care 01344 373 199

Health Customer Care 01344 373 194

Technical Support

Technical Support for XPS (Sasi: do we need to change to XPSTM) 0870 366 4180

Technical Support (Corporate/Preferred Accounts/PAD [1000+ employees]) 0870 908 0500

General

Technical Support for all other products 0870 908 0800

Home and Small Business Fax 0870 907 4006

Uruguay

Website: www.dell.com/tt  

E-mail: la-techsupport@dell.com  

Technical Support toll-free: 413-

Automated Order-Status Service toll-free: 1-800-

AutoTech (portable and desktop computers) toll-free: 1-800-

Hardware and Warranty Support (Dell TV, Printers, and Projectors) for Relationship customers toll-free: 1-800-

Americas Consumer XPS support toll-free: 1-800-

Consumer (Home and Home office) Support for all other Dell products toll-free: 1-800-

Customer Service toll-free: 1-800-

Employee Purchase Program (EPP) Customers toll-free: 1-800-

Financial Services website: www.dellfinancialservices.com  

Financial Services (lease/loans) toll-free: 1-877-

Your Monitor Setup Guide

To view PDF files (files with an extension of .pdf), click the document title. To save PDF files (files with an extension of .pdf) to your hard drive, right-click the document title, click Save Target As in Microsoft Internet Explorer or Save Link As in Netscape Navigator, and then specify a location on your hard drive to which you want to save the files. Your Monitor Setup Guide (.pdf ) (2.9 MB)

Back to Contents Page

U.S.A. ( Austin , Texas )

International Access Code: 011

Country Code: 1

Financial Services (Dell Preferred Accounts [DPA]) toll-free: 1-800-

Business   

Customer Service and Support toll-free: 1-800-

Employee Purchase Program (EPP) Customers toll-free: 1-800-

Support for printers,  projectors, PDAs, and MPS players toll-free: 1-877-

Public (government, education, and healthcare)  

Customer Service and Technical Support toll-free: 1-800-

Employee Purchase Program (EPP) Customers toll-free: 1-800-

Dell Sales toll-free: 1-800-

or toll-free: 1-800-

Dell Outlet Store (Dell refurbished computers) toll-free: 1-888-

Software and Peripherals Sales toll-free: 1-800-

Spare Parts Sales toll-free: 1-800-

Extended Service and Warranty Sales toll-free: 1-800-

Fax toll-free: 1-800-

Dell Services for the Deaf, Hard-of-Hearing, or Speech- Impaired

toll-free: 1-877

(1-877-335

U.S. Virgin Islands E-mail: la-techsupport@dell.com  

Technical Support toll-free: 1-877-

Venezuela

Website: www.dell.com/ve

E-mail: la-techsupport@dell.com

Technical Support toll-free: 0800-

NOTE: PDF files require Adobe Acrobat Reader, which can be downloaded from the Adobe website at www.adobe.com. To view a PDF file, launch Acrobat Reader. Then click FileOpen and select the PDF file.

Back to Contents Page

Setting Up Your Monitor Dell 2407WFP Flat Panel Monitor 

If you have a Dell desktop with no internet access

1. Right-click on the desktop and click Properties.

2. Select the Settings tab.

3. Select Advanced. if you are using Windows XP, click the Adapter tab.

4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

5. Follow the directions listed below for your identified Graphics Adapter:

o ATI:       1. ATI Folder on the CD (RADEON & RAGE family only; excludes mobile and FireGL platforms).     2. Run the installation by double clicking the executable file.     3. After installing the drivers, attempt to set the resolution to 1920x1200 again.

o NVidia:

    1. NVidia folder on the CD (GEFORCE & TNT2 family only; excludes mobile and QUADRO chipsets).     2. Run the installation by double clicking the executable file.     3. After installing the drivers, attempt to set the resolution to 1920x1200 again.

Back to Contents Page

NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell to inquire about a Graphics Adapter that supports these resolutions.  

Back to Contents Page

Setting Up Your Monitor Dell 2407WFP Flat Panel Monitor 

If you have a Dell desktop or a Dell portable computer with internet access

1. Go to http://support.dell.com, enter your service tag, and download the latest driver for your graphics card.

2. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.

Back to Contents Page

NOTE: If you are unable to set the resolution to 1920x1200, please contact Dell to inquire about a Graphics Adapter that supports these resolutions.  

Back to Contents Page

Setting Up Your Monitor Dell 2407WFP Flat Panel Monitor 

If you have non Dell desktop, portable computer, or graphic card

1. Right-click on the desktop and click Properties.

2. Select the Settings tab.

3. Select Advanced.

4. Identify your graphics controller supplier from the description at the top of the window (e.g. NVIDIA, ATI, Intel etc.).

5. Please refer to the graphic card provider website for updated driver (for example, http://www.ATI.com OR http://www.NVIDIA.com ).

6. After installing the drivers for your Graphics Adapter, attempt to set the resolution to 1920x1200 again.

Back to Contents Page

NOTE: If you are unable to set the resolution to 1920x1200, please contact the manufacturer of your computer or consider purchasing a graphics adapter that will support the video resolution of 1920x1200.   

Back to Contents Page

Setting Up Your Monitor Dell 2407WFP Flat Panel Monitor 

Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal)

For optimal display performance while using the Microsoft Windows operating systems, set the display resolution to 1920 x 1200 pixels by performing the following steps:

1. Right-click on the desktop and click Properties.

2. Select the Settings tab.

3. Move the slider-bar to the right by pressing and holding left-mouse button and adjust the screen resolution to 1920x1200.

4. Click OK.

    If you do not see 1920x1200 as an option, you may need to update your graphics driver. Please choose the scenario below that best describes the

computer system you are using, and follow the provided directions:

1: If you have a Dell desktop with no internet access.

2: If you have a Dell desktop or a Dell portable computer with internet access.

3: If you have non Dell desktop, portable computer, or graphic card.

Back to Contents Page

Dell 2407WFP Flat Panel Monitor   

Information in this document is subject to change without notice.  2006 Dell Inc. All rights reserved.

Reproduction in any manner whatsoever without the written permission of Dell Inc.is strictly forbidden.

Trademarks used in this text: Dell, the DELL logo, Inspiron, Dell Precision, Dimension, OptiPlex, Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage are trademarks of DellInc  Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation  Adobe is a trademark of Adobe Systems Incorporated, which may be registered in certain jurisdictions. ENERGY STAR is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR partner, Dell Inc. has determined that this product meets the ENERGY STAR guidelines for energy efficiency.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.

Model 2407WFP

April 2006        Rev. A03

User Guide

Important instructions and graphic drivers to set the display resolution to 1920x1200 (Optimal) 

Back to Contents Page

Rotating Your  Monitor   Dell 2407WFP Flat Panel Monitor 

  Changing the Rotation of Your Monitor

  Rotating Your Operating System

Changing the Rotation of Your Monitor

Before you rotate the monitor, your monitor should be fully vertically extended (Vertical Extension) and fully tilted (Tilt) up to avoid hitting the bottom edge of the monitor.

Rotating Your Operating System 

After you have rotated your monitor, you need to complete the procedure below to rotate your operating system.

1. Right-click on the desktop and click Properties. 2. Select the Settings tab and click Advanced. 3. If you have ATI, select the Rotation tab and set the preferred rotation.

If you have nVidia, click the nVidia tab, in the left-hand column select NVRotate, and then select the preferred rotation. If you have Intel, select the Intel graphics tab, click Graphic Properties, select the Rotation tab, and then set the preferred rotation.

Back to Contents Page

NOTE: To take advantage of the "Display Rotation" function (Landscape versus Portrait view) an updated graphics driver is required for your Dell  Computer not included with this monitor. Please download the graphics driver from support.dell.com and refer to the "download" section for "Video Drivers" for latest driver updates.

NOTE: When in "Portrait View Mode", you may experience performance degradation in graphic-intensive applications (3D Gaming etc.)

 NOTE: If you are using the monitor with a non-Dell computer,  you need to go to the graphics driver website or your computer manufacturer website for  information on rotating your operating system.  

NOTE: If you do not see the rotation option or it is not working correctly, go to support.dell.com and download the latest driver for your graphics card.

Back to Contents Page

Setting Up Your Monitor Dell 2407WFP Flat Panel Monitor 

  Connecting Your Monitor

  Using the Front Panel Buttons

  Using the OSD

  Using the Dell Soundbar (Optional)

Connecting Your Monitor

CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.

1 AC power cord connector

2 DC power connector for Dell Soundbar 3 DVI connector

4 VGA connector

5 Composite video connector

6 S-Video connector

To connect your monitor to the computer perform the following steps/instructions.

l Turn off your computer and disconnect the power cable.  l Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your computer. Do not use both cables on the same computer.The only case in which both cables can be used is if they are connected to two different computers with appropriate video systems. (Graphics are for illustration only. System appearance may vary). 

l Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer . l Connect USB peripherals to the downstream USB ports (rear or side) on the monitor. (See rear or bottom view for details.) l Plug the power cables for your computer and monitor into a nearby outlet.  l Turn on the monitor and computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems. l Use the cable holder on the monitor stand to neatly organize the cables.

Using the Front Panel Buttons 

Use the control buttons on the front of the monitor to adjust the characteristics of the image being displayed. As you use these buttons to adjust the controls, an OSD shows their numeric values as they change.

7 Component video connectors

8 USB upstream port

9 USB downstream ports

NOTE: If your computer does not support the DVI connector, you can leave the cable unconnected or remove it.

NOTE: For USB peripherals already connected to your computer, changing the USB connection to your monitor is not necessary.

A

Input Source Select

Use Input Source Select button to select between five different video signals that may be connected to your monitor.

1. VGA input 2. DVI-D input 3. S- Video input 4. Composite video input 5. Component video input  

As you cycle through the inputs you will see the following messages to indicate currently selected input source. It may take 1 or 2 seconds for the image to appear.

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.

If either S-Video or Composite input is selected and both cables are not connected or the video source is turned off, the screen does not have an image. If any button is pressed (except power button), the monitor displays the following message:

or

or

or

Using the OSD

 Accessing the Menu System

1.      Push the MENU button to launch the OSD menu and display the main menu.

Main Menu for Analog (VGA) Input

Or

Main Menu for non Analog (non VGA) Input

2.      Push the and buttons to move between the setting options. As you move from one icon to another, the option name is highlighted. See the table for a complete list of all the options available for the monitor.

3.      Push the MENU button once to activate the highlighted option.  

B

PIP / PBP Select

Use this button to activate PIP (Picture-in-Picture) / PBP (Picture-by-Picture) modes adjustment.

Pressing this button continually cycles the monitor through the following modes : OFF- ->PIP- ->PBP. You will see the following messages corresponding to the mode selected.

C

OSD Menu / Select

The MENU button is used to launch the on-screen display(OSD) and select the OSD Menu. See Accessing the Menu System

D ,E

Down (-) and Up (+)

Use these buttons for navigating and adjusting the slider-bar(decrease/increase ranges) controls in the OSD.

F

Power button

 (with power light indicator)

The green LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.

The Power button turns the monitor on and off.

NOTE: If you change the settings and then either proceed to another menu, or exit the OSD menu, the monitor automatically saves those changes. The  changes are also saved if you change the settings and then wait for the OSD menu to disappear.

  NOTE: AUTO ADJUST is only available when you are using the analog (VGA) connector.

4.      Push and button to select the desired parameter.

5.      Push MENU to enter the slide bar and then use the   and buttons, according to the indicators on the menu, to make your changes.

6.      Select the "back" option to return to the main menu or "exit" to exit the OSD menu.

Icon Menu and Submenus Description

EXIT Select to exit the main menu.

BRIGHTNESS & CONTRAST

Back

Brightness

Contrast

Exit Menu

This menu is to activate Brightness/Contrast adjustment.

Push to go back to the main menu.

Brightness adjusts the luminance of the backlight.

Push the   button to increase brightness and push the  button to decrease brightness (min 0 ~ max 100).

Adjust Brightness first, and then adjust Contrast only if further adjustment is necessary.

Push the button to increase contrast and push the button to decrease contrast (min 0 ~ max 100). The Contrast function adjusts the degree of difference between darkness and lightness on the monitor screen.

Push  to exit the OSD main menu.

NOTE: When using DVI source, the contrast adjustment is not available.

AUTO ADJUST

Even though your computer recognizes your monitor on startup, the Auto Adjustment function optimizes the display settings for use with your particular setup.  

  NOTE: In most cases, Auto Adjust produces the best image for your configuration.

NOTE: AUTO ADJUST option is only available when you are using the analog (VGA) connector.

INPUT

SOURCE

The INPUT SOURCE menu is to select between different video signals that may be connected to your monitor.

Back

VGA

DVI-D

S-Video

Composite

Component

Scan for Sources

Exit Menu

Push to go back to the main menu.

Select VGA input when you are using the analog (VGA) connector. Push to select the VGA input source.

Select DVI-D input when you are using the Digital (DVI) connector. Push to select the DVI input source.

Select S-Video input when you are using S-Video connector. Push to select the S-Video input source.

Select Composite input when you are using composite video connector. Push to select the composite input source.

Select Component input when you are using component video connector. Push to select the component input source.

Push to scan for available input signals.

Push  to exit the OSD main menu.

COLOR SETTINGS

Back

Color Settings Mode

(VGA/DVI-D)

Color Settings adjusts the color setting mode and color temperature.

There are different color setting sub-menus for VGA/DVI-D and Video input.

            Color setting submenu for VGA/DVI-D input                                    

Push to go back to the main menu.

To achieve the different color mode for PC and Mac.

Color Adjustment

Color Format (Video/DVI-HD)

Hue

Saturation

Color Reset

Exit Menu

PC Blue: PC Blue is selected to obtain a bluish tint. This color setting is typically used for text based applications (Spreadsheets, Programming, Text Editors etc.).

PC Red: Red Preset is selected to obtain a redder tint. This color setting is typically used for color intensive applications (Photograph Image Editing, Multimedia, Movies etc.).

PC Custom: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit increments, from '0' to '100'.

NOTE: Color temperature is a measure of the 'warmth' of the image colors (red/green/blue). The two available presets ('Blue' and 'Red') favor blue and red accordingly. Select each one to see how each range suits your eye....or utilize the 'Custom Color' option to customize the color settings to your exact choice.

 Color setting submenu for Video/DVI-HD input

To achieve the different color domain for PC RGB and HD YPbPr (HD YPbPr is suitable for HD video playback over DVI. PC RGB is suitable for normal PC graphics display over DVI.).

This feature can make color shift of video image to green or purple. This is used to adjust for desired flesh tone color. Use

makes video image shade into greenish

makes video image shade into purplish

NOTE: Hue adjustment only available for video input.

This feature can adjust the color saturation of the video image. Use or to adjust the saturation from '0' to '100' .

makes video image looks more monochrome

makes video image looks more colorful  

NOTE: Saturation adjustment only available for video input.

Return your monitor color settings to those that were set at the time of manufacture.

Push  to exit the OSD main menu.

IMAGE MODES

There are 3 image modes for different usage.

    Image mode submenu for VGA/DVI-D input              Image mode submenu

Back

VGA/DVI-D input

Desktop Mode

Multimedia Mode

Gaming Mode

Video input

Theater Mode

 Sports Mode

Nature Mode

Exit Menu

            or           

NOTE: Image modes are different between the VGA/DVI-D and Video inputs

Push to go back to the main menu.

Mode suitable for desktop applications.

Mode for multimedia applications, eg video playback.

Mode suitable for gaming applications.

Mode suitable for movie playback.

Mode suitable for sports scenes.

Mode suitable for nature scenes.

Push  to exit the OSD main menu.

DISPLAY SETTINGS

Back

Wide Mode

H Position

V Position

Sharpness

Zoom

Horizontal Pan

Vertical  Pan

Pixel Clock

Phase

 Audio Option

Display Info

Display Reset

Exit Menu

Push to go back to the main menu.

Adjust the image ratio as 1:1, aspect or full screen.   

NOTE: Wide Mode adjustment is not required at optimal preset resolution 1920 x 1200.

Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

This feature can make the image look sharper or softer. Use or to adjust the sharpness from '0' to '100' .

Use the Zoom function to zoom in to specific area of interest.

Using the and keys to zoom in and out.

After zooming in, the horizontal and vertical pan function allows you to pan the enlarged image left/right and up/down respectively.

Use the and buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

Use the and buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference. These settings are accessed through the main OSD menu, by selecting 'Image Settings'.

Use the and buttons to adjust for best image quality.

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.     

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

To turn on or off Audio Power during Power Save mode.

All the settings related to this monitor.

Reset the image to the original factory setting.

Push  to exit the OSD main menu.

MENU SETTINGS

Back

Language

Menu Horizontal Position

 Menu Vertical Position

Menu Timer

Push to go back to the main menu.

Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).

and buttons move OSD left and right.

and buttons move OSD up and down.

OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Use the and buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.

Transparency

Menu Rotation

Menu Lock

Factory Reset

DDC/CI

Exit Menu

This function is used to adjust the OSD background from opaque to transparent.

Rotates the OSD by 90 degrees counter-clockwise. Your can adjust according to your Display Rotation.

Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are locked except the menu  

NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre ) to unlock and allow user access to all applicable settings.

Reset all OSD settings to the factory preset values.

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your PC. You can disable this feature by selecting "Disable". Enable this feature for best user experience and optimum performance of your monitor.

Push  to exit the OSD main menu.

PIP SETTINGS

Back

Mode

When PIP/PBP activated

PIP/PBP Source

PIP Position

PIP Size

This function brings up a window displaying image from another input source.

PIP/PBP submenu when PIP/PBP OFF (main source is VGA/DVI-D input)                PIP/PBP submenu when PIP/PBP OFF

       or     

PIP/PBP submenu when PIP/PBP ON (main source is VGA/DVI-D input)                PIP/PBP submenu when PIP/PBP ON

         or    

NOTE: When using DVI source, the contrast adjustment is not available.

Push   to go back to the main menu.

There is two modes: PIP (Picture in Picture) and PBP (Picture By Picture)

Use  and   to browse and  to select "Off", "PIP" or "PBP".

When PIP/PBP is activated, select "Swap" to exchange the input source for the main screen and PIP/PBP window.

Select an input signal for PIP/PBP. (VGA/DVI/S-Video/Composite/Component)

Use  and   to browse and  to select.

Select PIP window position.

Use  and   to browse and  to select.

Select PIP window size.

Use  and   to browse and  to select.

OSD Warning Messages

PIP/PBP Contrast

PIP/PBP Hue/Tint

PIP/PBP Saturation

Exit Menu

Adjust the contrast level of the picture in PIP/PBP Mode.

reduce the contrast

increases the contrast

This function shifts the color of PIP/PBP image to green or purple. This is used to adjust for desired flesh tone color.

shifts image color towards green

shifts image color towards purple

Adjust the color saturation of PIP/PBP image.

makes the image look more monochrome

makes the image look more colorful

Push  to exit the OSD main menu.

Your monitor will prompt you to achieve the best performance when you select PBP.  You may see the following messages under certain combinations of input  sources in PBP mode.

 or

When the monitor does not support a particular resolution mode you will see the following message :

  This means that the monitor cannot synchronize with the signal that it is receiving from the computer. See Monitor Specifications for the Horizontal and Vertical frequency ranges addressable  by this monitor. Recommended mode is 1920 X 1200.

  You will see the following message before the DDC/CI function is disabled.  

  When monitor enters Power Save mode, the following message appears :  

Activate the computer and wake up the monitor to gain access to the OSD

      If you press any button other than the power button one of the following messages will appear depending on the selected input:

VGA / DVI-D input   Video Input

 or

In PIP mode, when the monitor does not sense the selected second signal input, one of the following messages will appear depending upon the selected input as long as the OSD screen is closed.

1. VGA    2. DVI-D   3. S-Video   4. Composite  

See Solving Problems for more information.

Using the Dell Soundbar (Optional)

Soundbar Attachment to the Monitor

      or    

         or

         or  

         or  

If either VGA or DVI-D input is selected and both VGA and DVI-D cables are not connected, a floating dialog box as shown below appears.

 or    

NOTE: When the cable is connected back to the input of the monitor, any active PIP/PBP window will disappear. Please enter PIP/PBP submenu to bring back the PIP

NOTE: The PIP/PBP functions can bring up a picture from a second image source. Thus you can watch images from 1 PC source (D-Sub or DVI) and 1 Video Source (Composite or S functions will not allow for 2 PC sources or 2 Video sources to perform PIP/PBP.

1. Attach mechanism

2. Headphone connectors

3.  Power indicator

4. Power/Volume control

Back to Contents Page

NOTE:  Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only. 

NOTICE: DO NOT USE WITH ANY DEVICE OTHER THAN DELL Soundbar. 

1. Working from the rear of the monitor, attach Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.

2. Slide the Soundbar to the left until it snaps into place.

3.  Connect the Soundbar with the DC power connector.

4. Insert the mini stereo plug from the rear of the Soundbar into the computer's audio output jack.

Back to Contents Page

Solving Problems Dell 2407WFP Flat Panel Monitor 

  Monitor Specific Troubleshooting

  Common Problems

  Video Problems

  Product Specific Problems

  Universal Serial Bus (USB) Specific Problems

  Dell Soundbar (Optional) Troubleshooting

  Card Reader Troubleshooting

Monitor Specific Troubleshooting

 Self-Test Feature Check

Your monitor provides a self-test feature that allows you to check whether your monitor is functioning properly. If your monitor and computer are properly connected but the monitor screen remains dark, run the monitor self-test by performing the following steps:

1. Turn off both your computer and the monitor. 2. Unplug the video cable from the back of the computer. To ensure proper Self-Test operation, remove both Digital (white connector) and the Analog (blue

connector) cables from the back of computer. 3. Turn on the monitor.

4. This box also appears during normal system operation if the video cable becomes disconnected or damaged. 5. Turn off your monitor and reconnect the video cable; then turn on both your computer and the monitor.

If your monitor screen remains blank after you use the previous procedure, check your video controller and computer system, because your monitor is functioning properly.

Common Problems

The following table contains general information about common monitor problems you might encounter.

CAUTION: Before you begin any of the procedures in this section, follow the Safety Instructions.

The floating dialog box should appear on-screen (against a black background) if the monitor cannot sense a video signal and is working correctly. While in self-test mode, the power LED remains green. Also, depending upon the selected input, one of the dialogs shown below will continuously scroll through the screen.

  or   

NOTE: Self test feature check is not available for S-Video, Composite and Component video modes.

COMMON SYMPTOMS

WHAT YOU EXPERIENCE

POSSIBLE SOLUTIONS

No Video/ Power LED off

No picture l Check connection integrity at both ends of the video cable l Electric outlet verification l Ensure power button depressed fully

No Video/ Power LED on

No picture or no brightness

l Increase brightness & contrast controls via OSD l Perform monitor self-test feature check l Check for bent or broken pins

Poor Focus Picture is fuzzy, blurry or ghosting

l Auto Adjust via OSD l Adjust Phase and Pixel Clock controls via OSD l Eliminate video extension cables l Perform monitor reset l Lower video resolution or increase font size

Shaky/Jittery Video Wavy picture or fine movement

l Auto Adjust via OSD l Adjust Phase and Pixel Clock controls via OSD l Perform monitor reset

 Video Problems

l Check environmental factors l Relocate and test in another room

Missing Pixels LCD screen has spots

l Cycle power on-off l These are pixels that are permanently off and is a natural defect that occurs in LCD technology

Stuck-on Pixels LCD screen has bright spots

l Cycle power on-off l These are pixels that are permanently on and is a natural defect that occurs in LCD technology

Brightness Problems Picture too dim or too bright

l Perform monitor reset on "Factory Reset" l Auto Adjust via OSD l Adjust brightness & contrast controls via OSD

NOTE: When using '2: DVI-D', the contrast adjustment is not available.

Geometric Distortion Screen not centered correctly

l Perform monitor reset on "Display Reset" l Auto Adjust via OSD l Adjust brightness & contrast controls via OSD l Ensure monitor is in proper video mode

NOTE: When using '2: DVI-D', the positioning adjustments are not available.

Horizontal/Vertical Lines

Screen has one or more lines

l Perform monitor reset on "Display Reset" l Auto Adjust via OSD l Adjust Phase and Pixel Clock controls via OSD l Perform monitor self-test feature check and determine if these lines are also in self-test mode l Check for bent or broken pins

NOTE: When using '2: DVI-D', the Pixel Clock and Phase adjustments are not available.

Sync Problems Screen is scrambled or appears torn

l Perform monitor reset on "Display Reset" l Auto Adjust via OSD l Adjust Phase and Pixel Clock controls via OSD l Perform monitor self-test feature check to determine if scrambled screen appears in self-test mode l Check for bent or broken pins l Boot up in the "safe mode"

LCD Scratched Screen has scratches or smudges

l Turn monitor off and clean the screen l For cleaning instruction, see Caring for Your Monitor.

Safety Related Issues Visible signs of smoke or sparks

l Do not perform any troubleshooting steps l Monitor needs to be replaced

Intermittent Problems Monitor malfunctions on & off

l Ensure monitor is in proper video mode l Ensure video cable connection to computer and to the flat panel is secure l Perform monitor reset on "Factory Reset" l Perform monitor self-test feature check to determine if the intermittent problem occurs in self-test mode

Missing Color Picture missing color

l Perform monitor self-test feature check l Check connection integrity at both end of the video cable l Check for bent or broken pins

Wrong Color Picture color not good

l Change the color to "PC Custom Color" or "MAC Custom Color" l Adjust R/G/B value of "PC Custom Color" or "MAC Custom Color"

l Change the Color Format to "PC RGB" or "YPbPr" (for Video/DVI-HD inputs)

Image retention  from  a static image left on the monitor for a long  period of time

Faint shadow from the static image displayed appears on the screen

l Use the Power Management feature to turn off the monitor at all times when not in use l Alternatively, use a dynamically changing screensaver

COMMON SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS

No Video No signal indicator is displayed l Check Video Input Selection Composite: Yellow colored RCA jack S-Video: Typically a round 4 pin jack Component: Red, Blue, Green colored RCA jacks  

Low Quality DVD playback

Picture not crisp and some color distortion

l Check DVD connection Composite gives good picture S-Video gives better picture Component: Red, Blue, Green colored RCA jacks

Product Specific Problems

Universal Serial Bus (USB) Specific Problems

Dell Soundbar (Optional) Troubleshooting

Blinking Video Video is blinking or discontinuous l Check DVD connection Composite gives good picture S-Video gives better picture Component: Red, Blue, Green colored RCA jacks   

l Check if DVD player is HDCP compliant. Some non-compliant players may exhibit blinking video and others will display a

raster screen.

NOTE: When choosing S-Video, Composite or Component video, Auto Adjust function is not available.

SPECIFIC SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS

Screen image is too small Image is centered on screen, but does not fill entire viewing area

l Perform monitor reset on "Factory Reset"

Cannot adjust the monitor with the buttons on the front panel

OSD does not appear on the screen l Turn the monitor off and unplug the power cord and then plug back and power on

The monitor will not go into power saving mode.

No picture, the LED light is green. When press +, - or Menu key, the message No S-Video input signal , No Composite input signal   or No Component input signal will appear.

l Move mouse or hit any key on the keyboard on the computer or  activate  video player,  then access the OSD to set   Audio to off state.

No Input Signal when user controls pressed

No picture, the LED light is green. When press +, - or Menu key, the message No S-Video input signal , No Composite input signal or No Component input signal will appear.

l Check the signal source Make sure the Computer is not in power saving by moving mouse or pressing any key on the keyboard.

l Check to make sure Video Source to S- Video, Composite or Component is powered and playing video media.

l Check whether the signal cable is plugged in and seated properly.  Re-plug the signal cable if necessary.

l Re-boot the computer or video player.

The monitor will not fill the entire screen.

The picture cant fill the height or width of the screen.

l Due to the non-standard formats of DVDs, the monitor may not show the full screen pictures.

NOTE: When choosing DVI-D mode, Auto Adjust  function is not available.

SPECIFIC SYMPTOMS WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS

USB interface is not working USB peripherals are not working l Check that your monitor is powered ON. l Reconnect the upstream cable to your computer. l Reconnect the USB peripherals (downstream connector).  l Switch off and then turn on the monitor again. l Reboot the computer.

High Speed USB 2.0 interface is slow.

High Speed USB 2.0 peripherals working slowly or not at all.

l Check that your computer is USB 2.0 capable. l Verify USB 2.0 source on your computer. l Reconnect the upstream cable to your computer. l Reconnect the USB peripherals (downstream connector).  l Reboot the computer.

COMMON SYMPTOMS

WHAT YOU EXPERIENCE POSSIBLE SOLUTIONS

No Sound No power to Soundbar - the power indicator is off. (built-in DC power supply. i.e.

l Turn the Power/Volume knob on the Soundbar clockwise to the middle position; check if the power indicator (green LED) on the front of the Soundbar is illuminated.

l Confirm that the power cable from the Soundbar is plugged into the monitor.

Card Reader Troubleshooting

2407WFP) l Confirm that the monitor has power. l If the monitor has no power, see Monitor Specific Troubleshooting for monitor common

problem.

No Sound Soundbar has power - power indicator is on.

l Plug the audio line-in cable into the computer's audio out jack. l Set all Windows volume controls to their maximum. l Play some audio content on the computer (i.e. audio CD, or MP3). l Turn the Power/Volume knob on the Soundbar clockwise to a higher volume setting. l Clean and reseat the audio line-in plug. l Test the Soundbar using another audio source (i.e. portable CD player).

Distorted Sound Computer's sound card is used as the audio source.

l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line-in plug is completely inserted into the jack of the sound card. l Set all Windows volume controls to their midpoints. l Decrease the volume of the audio application. l Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting. l Clean and reseat the audio line-in plug. l Troubleshoot the computer's sound card. l Test the Soundbar using another audio source (i.e. portable CD player).

Distorted Sound Other audio source is used. l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line-in plug is completely inserted into the jack of the audio source. l Decrease the volume of the audio source. l Turn the Power/Volume knob on the Soundbar counter-clockwise to a lower volume setting. l Clean and reseat the audio line-in plug.

Unbalanced Sound Output

Sound from only one side of Soundbar

l Clear any obstructions between the Soundbar and the user. l Confirm that the audio line-in plug is completely inserted into the jack of the sound card or

audio source. l Set all Windows audio balance controls (L-R) to their midpoints. l Clean and reseat the audio line-in plug. l Troubleshoot the computer's sound card. l Test the Soundbar using another audio source (i.e. portable CD player).

Low Volume Volume is too low. l Clear any obstructions between the Soundbar and the user. l Turn the Power/Volume knob on the Soundbar clockwise to the maximum volume setting. l Set all Windows volume controls to their maximum. l Increase the volume of the audio application. l Test the Soundbar using another audio source (i.e. portable CD player).

NOTICE: Do not remove the device while reading or writing media. Doing so may cause loss of data or malfunction in the media.

Problem Cause Solution

Drive letter is not assigned. (Windows XP only)

Conflict with network drive letter.

A. Right-click My Computer on the desktop, and then click Manage. Under Computer Management, click Desk Management. B. In the list of drives in the right panel, right- click Removable Device and then click Change Drive Letter and Paths. C. Click Change, and in the drop-down box, specify a drive letter for the Removable Device, choosing one that is not assigned to the mapped network drives. D. Click OK, and then click OK again

  Drive letter is assigned, but the media is not accessible

The media needs reformatting. Right-click the drive in Explorer and choose Format from the resulting menu.

The media has been ejected during writing or erasing.

Displays the error message, "Error copying file or folder." Displays the error message, "Cannot write folder (folder name) or file (file name)," during writing, or, "Cannot remove folder (folder name) or file(file name),". While erasing, you cannot write or erase in the same folder or file name.

Reinsert the media and write or erase again.

Format the media for writing or erasing the same folder or file name.

Despite the disappearance of the pop-up window, the media has been ejected while the LED was blinking.

Although the pop-up window disappears during writing, if you eject your media while the LED is still blinking, then you cannot complete your action on the media.

Format the media for writing or erasing the same folder or file name.

Cannot format or write on the media.

Write protect switch is enabled. Verify that the write- protect switch of the media is unlocked.

Back to Contents Page

Back to Contents Page

Using Your Adjustable Monitor Stand Dell 2407WFP Flat Panel Monitor 

  Attaching the Stand

  Organizing Your Cables

  Using the Tilt, Swivel and Vertical Extension

  Removing the Stand 

Attaching the Stand

1. Place the stand on a flat surface. 2. Fit the groove on the back of the monitor onto the 2 tabs of upper stand. 3. Lower the monitor so that the monitor mounting area snaps on or locks to stand.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the Cable management hole to neatly organize all cables as shown above.

Using the Tilt, Swivel and Vertical Extension

Tilt/Swivel

With the built-in pedestal, you can tilt and/or swivel the monitor for the most comfortable viewing angle.

Vertical Extension

Stand extends vertically up to 100mm via the Lock down / release button.

Removing the Stand

 After placing the monitor panel on a soft cloth or cushion, press and hold the Monitor Lock / Release Button, and then remove the stand.

NOTE: Stand is detached and extended when the monitor is shipped from the factory.

NOTE: If locked in the down position, press the Lock down / release button on the bottom rear of stand. Lift

Manualsnet FAQs

If you want to find out how the 2407WFP Dell works, you can view and download the Dell 2407WFP Monitor User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Dell 2407WFP as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Dell 2407WFP. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell 2407WFP Monitor User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell 2407WFP Monitor User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell 2407WFP Monitor User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell 2407WFP Monitor User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell 2407WFP Monitor User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.