Contents

Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide PDF

1 of 16
1 of 16

Summary of Content for Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide PDF

Aurora R6/R7 U.2 Solid-State Drive

Installation Guide

Computer Model: Alienware Aurora R7 Regulatory Model: D23M Regulatory Type: D23M001

Notes, cautions, and warnings

NOTE: A NOTE indicates important information that helps you make better use of your product.

CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

WARNING: A WARNING indicates a potential for property damage, personal injury, or death.

2018 Dell Inc. or its subsidiaries. All rights reserved. Dell, EMC, and other trademarks are trademarks of Dell Inc. or its subsidiaries. Other trademarks may be trademarks of their respective owners.

2018 - 08

Rev. A00

Contents

1 Before working inside your computer............................................................................................................. 4 Before you begin ............................................................................................................................................................... 4 Safety instructions............................................................................................................................................................. 4 Recommended tools..........................................................................................................................................................5

2 Installing the U.2 solid-state drive..................................................................................................................6

3 After working inside your computer..............................................................................................................15

4 Getting help and contacting Alienware......................................................................................................... 16 Self-help resources........................................................................................................................................................... 16 Contacting Alienware....................................................................................................................................................... 16

Contents 3

Before working inside your computer NOTE: The images in this document may differ from your computer depending on the configuration you ordered.

Topics:

Before you begin

Safety instructions

Recommended tools

Before you begin 1 Save and close all open files and exit all open applications.

2 Shut down your computer.

Windows 10: Click or tap Start > Power > Shut down.

NOTE: If you are using a different operating system, see the documentation of your operating system for shut-down instructions.

3 Disconnect your computer and all attached devices from their electrical outlets.

4 Disconnect all cables such as telephone cables, network cables, and so on, from your computer.

5 Disconnect all attached devices and peripherals, such as keyboard, mouse, monitor, and so on, from your computer.

6 Remove any media card and optical disc from your computer, if applicable.

7 After the computer is unplugged, press and hold the power button for 5 seconds to ground the system board.

Safety instructions Use the following safety guidelines to protect your computer from potential damage and ensure your personal safety.

WARNING: Before working inside your computer, read the safety information that shipped with your computer. For more safety best practices, see the Regulatory Compliance home page at www.dell.com/regulatory_compliance.

WARNING: Disconnect all power sources before opening the computer cover or panels. After you finish working inside the computer, replace all covers, panels, and screws before connecting to the electrical outlet.

CAUTION: To avoid damaging the computer, ensure that the work surface is flat and clean.

CAUTION: To avoid damaging the components and cards, handle them by their edges, and avoid touching pins and contacts.

CAUTION: You should only perform troubleshooting and repairs as authorized or directed by the Dell technical assistance team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. See the safety instructions that shipped with the product or at www.dell.com/regulatory_compliance.

CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.

CAUTION: When you disconnect a cable, pull on its connector or on its pull tab, not on the cable itself. Some cables have connectors with locking tabs or thumb-screws that you must disengage before disconnecting the cable. When disconnecting cables, keep them evenly aligned to avoid bending any connector pins. When connecting cables, ensure that the ports and connectors are correctly oriented and aligned.

1

4 Before working inside your computer

CAUTION: Press and eject any installed card from the media-card reader.

Recommended tools The procedures in this document may require the following tools:

Philips screwdriver #1

Flat-head screwdriver

Plastic scribe

Before working inside your computer 5

Installing the U.2 solid-state drive NOTE: Ensure that you remove the security cable and security screw from the security-cable slotif applicable.

1 Remove the screw (#6-32 X 1/2") that secures the side-panel release latch to the chassis.

2 Pull the side-panel release latch.

3 Release the left-side cover away from the chassis and then lift it from the computer.

Figure 1. Removing the left-side cover

1 screw 2 side-panel release latch

3 top cover 4 left-side cover

4 Lay the computer on the right side.

5 Disconnect the data and power cables from the hard drive.

6 Press the release tabs on the hard-drive carrier and slide the hard-drive carrier out of the hard-drive cage.

2

6 Installing the U.2 solid-state drive

Figure 2. Removing the hard drive

1 data cable 2 power cable

3 hard-drive cage 4 release tabs

5 hard-drive carrier

7 Place the U.2 solid-state drive in the hard-drive carrier and align the tabs on the carrier with the slots on the U.2 solid-state drive.

Figure 3. Assembling the U.2 solid-state drive

1 hard-drive carrier 2 fan cable

Installing the U.2 solid-state drive 7

3 U.2 solid-state drive

8 Slide the U.2 solid-state drive assembly into the hard-drive cage until it snaps into place.

Figure 4. U.2 solid-state drive assembly

1 solid-state drive assembly 2 chassis

9 Slide the power-supply unit cage release latches towards the unlock position.

Figure 5. Sliding the power-supply unit cage release latches

1 power-supply unit 2 chassis

3 power-supply unit cage release cage latches (2)

10 Lift the power-supply unit cage while pressing and holding the graphics-card bracket.

8 Installing the U.2 solid-state drive

Figure 6. Rotating the power-supply unit

1 power-supply unit cage 2 graphics-card bracket

3 chassis

11 Rotate the power-supply unit cage away from the chassis.

Installing the U.2 solid-state drive 9

Figure 7. Rotating the power-supply unit

1 power-supply unit

12 Lift to release the graphics-card bracket from the chassis.

10 Installing the U.2 solid-state drive

Figure 8. Removing the graphics card

1 graphics-card bracket 2 graphics card

13 Press the releasing clip on the power-cable connectors and disconnect the power cables from the graphics card.

14 Push the securing tab on the PCIe slot away from the graphics card, grasp the card by its top corner, and ease it out of the slot.

Installing the U.2 solid-state drive 11

Figure 9. Removing the graphics card

1 power cables 2 releasing clips (2)

3 graphics card 4 securing tab

15 Slide the fan cable and the data and power cable through the power-supply unit cage.

16 Connect the fan cable to the system board.

17 Connect the power cable to the power-supply unit.

18 Connect the data cable to the connector on the solid-state drive adapter.

19 Slide the solid-state drive adapter to the solid-state drive slot and replace the screw that secures the solid-state drive adapter to the system board.

12 Installing the U.2 solid-state drive

Figure 10. Connecting the cables

1 solid-state drive slot 2 screw

3 data cable 4 solid-state drive adapter

5 power cable 6 fan cable

20 Align the graphics card with the slot on the system board.

21 Place the graphics card into the slot and press down firmly until the graphics card snaps into place.

22 Connect the power cables to the graphics card.

23 Slide the tab on the graphics-card bracket into the slot on the chassis and snap it into place.

24 Rotate the power-supply unit cage towards the chassis until the unit snaps into place.

25 Connect the power cable to the U.2 solid-state drive.

Installing the U.2 solid-state drive 13

Figure 11. Connecting the power cable

1 chassis 2 power cable

26 Place the computer in an upright position.

27 Align the tabs on the left-side cover with the slots on the chassis.

28 Snap the left-side cover to lock it in place.

Figure 12. Replacing the left-side cover

1 chassis 2 slots

3 tabs 4 left-side cover

29 Replace the screw (#6-32 X 1/2") that secures the side-panel release latch to the chassis.

14 Installing the U.2 solid-state drive

After working inside your computer CAUTION: Leaving stray or loose screws inside your computer may severely damage your computer.

1 Replace all screws and ensure that no stray screws remain inside your computer.

2 Connect any external devices, peripherals, or cables you removed before working on your computer.

3 Replace any media cards, discs, or any other parts that you removed before working on your computer.

4 Connect your computer and all attached devices to their electrical outlets.

5 Turn on your computer.

3

After working inside your computer 15

Getting help and contacting Alienware

Self-help resources You can get information and help on Alienware products and services using these online self-help resources:

Table 1. Self-help resources

Information about Alienware products and services www.alienware.com

Troubleshooting information, user manuals, setup instructions, product specifications, technical help blogs, drivers, software updates, and so on

www.alienware.com/gamingservices

Videos providing step-by-step instructions to service your computer www.youtube.com/alienwareservices

Contacting Alienware To contact Alienwa

Manualsnet FAQs

If you want to find out how the Alienware Dell works, you can view and download the Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide on the Manualsnet website.

Yes, we have the U.2 SSD Installation Guide for Dell Alienware as well as other Dell manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The U.2 SSD Installation Guide should include all the details that are needed to use a Dell Alienware. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Dell Alienware Aurora R7 Desktop U.2 SSD Installation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.