Cuisinart WCH-1000 Quick Step Guide PDF

1 of 2
1 of 2

Summary of Content for Cuisinart WCH-1000 Quick Step Guide PDF

WATER FILTER PREPARATION

WATER FILTER INSTALLATION

3. With Cuisinart logo facing up, insert filter into upper water tank and push firmly into place.

Release filter and let soak for at least 15 minutes. The filter should be partially submerged and may tilt to one side.

4. Place upper water tank on a pitcher (or another type of container) and fill with cold water. Let drain for 5 minutes, then discard remaining water.

2. While filter is soaking, remove filter timer from lid and wash lid and both tanks with warm, soapy water. Replace timer.

1. Remove filter from packaging. DO NOT WASH FILTER. Press filter firmly to the bottom of an empty bowl sideways. Slowly submerge with cold water to cover by 1" and hold under water for 30 seconds.

1-GALLON CLEANWATER COUNTERTOP FILTRATION SYSTEM

IMPORTANT! Do not throw away. read before operating your new

water filtration system. Keep for further reference.

This setup guide is intended to be a supplement to the Instruction Booklet. In order to ensure proper setup, safe operation and optimum performance, please read the entire Instruction Booklet.

You will need a large bowl, a pitcher (or another type of container) and a glass to complete this setup. Do not plug in unit until aLL steps of SEtUP are complete.

QUICK SETUP GUIDE: PART 1

QUICK SETUP GUIDE: PART 2

5. Place upper tank onto lower tank and cover with lid. Place assembled tanks on base with vertical groove on upper tank facing the back of the unit.

6. Flip lid open and add cold water to FILL line. Continue adding to the FILL line until upper and lower tanks are completely full. This may take 30 40 minutes.

7. Place a glass under right spigot and press and hold COLD button until water flow is steady. Repeat for ROOM. This may take a couple of minutes per button.

8. Flip lid open and refill upper tank with cold water to FILL line. Continue adding to the FILL line until upper and lower tanks are completely full.

PG-24576

10. Refer to Instruction Booklet for Operating Instructions.

9. Peel sticker off filter timer and press and hold START button until Filtering is displayed.

Filtering

WATER DISPENSER

Manualsnet FAQs

If you want to find out how the WCH-1000 Cuisinart works, you can view and download the Cuisinart WCH-1000 Quick Step Guide on the Manualsnet website.

Yes, we have the Quick Step Guide for Cuisinart WCH-1000 as well as other Cuisinart manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Step Guide should include all the details that are needed to use a Cuisinart WCH-1000. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cuisinart WCH-1000 Quick Step Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cuisinart WCH-1000 Quick Step Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cuisinart WCH-1000 Quick Step Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cuisinart WCH-1000 Quick Step Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Cuisinart WCH-1000 Quick Step Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.