Cuisinart MCP116-20N Use and Care Guide PDF

1 of 2
1 of 2

Summary of Content for Cuisinart MCP116-20N Use and Care Guide PDF

LIFETIME WARRANTY (U.S. AND CANADA ONLY)

Your Cuisinart Cookware is warranted to be free of defects in material and workmanship under normal home use from the date of original purchase throughout the original purchasers lifetime.

HASSLE-FREE REPLACEMENT WARRANTY Your ultimate satisfaction in Cuisinart products is our goal, so if your Cuisinart Cookware should fail within the generous warranty period, we will repair it or, if necessary, replace it at no cost to you. To obtain a return shipping label, email us at www.cuisinart.com/customer-care/product-return. Or call our Consumer Service Center toll-free at 1-800-726-0190 to speak with a representative.

This warranty excludes damage caused by accident, misuse or abuse, including damage caused by overheating, and it does not apply to scratches, stains, discoloration or other damage to external or internal surfaces which does not impair the functional utility of the cookware.

This warranty also expressly excludes all incidental or consequential damages. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the foregoing limitation or exclusion may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

CALIFORNIA RESIDENTS ONLY

California law provides that for In-Warranty Service, California residents have the option of returning a nonconforming product (a) to the store where it was purchased or (b) to another retail store which sells Cuisinart products of the same type. The retail store shall then, according to its preference, either repair the product, refer the consumer to an independent repair facility, replace the product, or refund the purchase price less the amount directly attributable to the consumers prior usage of the product. If the above two options do not result in the appropriate relief to the consumer, the consumer may then take the product to an i ndependent repair facility, if service or repair can be economically accomplished. Cuisinart, and not the consumer, will be re sponsible for the reasonable cost of such service, repair, replacement or refund for nonconforming products under warranty.

California residents may also, according to their preference, return nonconforming products directly to Cuisinart for repair, or if necessary, replacement, by calling our Consumer Service Center toll-free at 1-800-726-0190. To obtain a return shipping label, email us at www.cuisinart.com/customer-care/product- return. Cuisinart will be responsible for the cost of the repair, repl acement, and shipping and handling for such nonconforming products under warranty.

2020 Cuisinart East Windsor, NJ 08520 Printed in China 18CW056691 IB-7192D

MultiClad Pro Stainless

Use and Care Guide

MultiClad Pro Cookware

P R O F E S S I O N A L C O O K WA R E F O R G O U R M E T C O O K I N G

Cuisinart MultiClad Pro Stainless Cookware is an investment that will prove its worth every time you use it. Exclusively designed, triple-ply material provides superior heat conductivity and even heat distribution to meet the demands of gourmet chefs everywhere. When properly cared for, your Cuisinart MultiClad Pro Stainless Cookware will give countless years of service and pleasure. Follow the use and care suggestions in this leaflet to preserve and maintain cookwares original beauty.

n ESSENTIAL PRECAUTIONS Never use Cuisinart MultiClad Pro Stainless Cookware on high heat. Food will burn. The triple-ply construction of this cookware is highly conductive and efficient for quick, even heat distribution. We recommend using a low to medium setting for most cooking. To boil water, medium-high is sufficient. Never leave Cuisinart Cookware or any pan empty over a hot burner. Doing so can ruin the pan and cause damage to the stovetop.

n BEFORE USING Wash your new cookware in hot water with a mild soap or dish detergent before using for the first time. Rinse thoroughly and wipe dry immediately with a soft dish towel, or you may place your Cuisinart MultiClad Pro Stainless cookware in a dishwasher.

n EASY MAINTENANCE Immediately after each use, fill the pan with hot water and liquid dish detergent; let stand until lukewarm. Use a sponge or soft cloth to remove any remaining food particles. Do not use steel wool or other coarse metal pads that could scratch the cookware. Rinse thoroughly and dry immediately for a flawless finish. Cuisinart MultiClad Pro Stainless Cookware features oven-safe handles that can withstand oven temperatures up to 500F. Caution should be used when handling any cookware handles and we recommend the use of potholders.

n WHAT ABOUT THE DISHWASHER? Cuisinart MultiClad Pro Stainless Cookware is dishwasher safe, but remember that soil from other dishes may be abrasive. If the dishwasher is carelessly packed, other dishes or flatware may mar the surface of the cookware. Over a long period, regular dishwasher cleaning will eventually scratch any cookware surface. We recom- mend using a non-lemon detergent.

n WHAT ABOUT METAL UTENSILS? We recommend using plastic or wooden utensils with your Cuisinart MultiClad Pro Stainless Cookware. You may prefer using metal utensils. These may scratch the cooking surface, but will in no way impair the performance of your Cuisinart MultiClad Pro Stainless Cookware. You may use a hand mixer with metal beaters which can scratch the interior surface, but will not impair the cookwares performance or its durability.

n TO REMOVE STAINS Calcium in your water may leave a multicolored stain. This is from a harmless deposit and can be removed with a little warm vinegar. Certain foods such as pasta or oatmeal may leave a light residue or cloudy appearance. This can be easily removed with any nonabrasive cleaning product.

n TO REMOVE STUBBORN RESIDUE When food is burned in the pan, a stubborn black residue may remain. If soaking does not loosen it, add water to a depth of one inch in the pan, then add a tablespoon of dishwasher detergent (a non-lemon product). Bring to a boil, reduce heat and simmer for 15 minutes. Let cool in the pan, then drain and rinse. Loosen the residue with a sponge or plastic spatula. Repeat if necessary.

n TO REMOVE BURNER STAINS Stains on the outside bottom (not sides) of pans can be removed with an oven cleaner. Follow the manufacturers directions and spray or brush the cleaner on only the outside bottom of the pan. If the directions call for using the cleaner in a warm oven, heat the pan before applying the cleaner. Rinse thoroughly after cleaning. CAUTION: Detergent fumes can be irritating. Carry out the following procedure under a hood with an exhaust fan or in a well-ventilated room.

n COOKING OVER A GAS BURNER When cooking over a gas burner, make certain the flame touches only the pan bottom. If the flame comes up the sides of the pan, energy is wasted and the sides of the pan may become permanently discolored. IMPORTANT NOTE: Cuisinart MultiClad Pro Stainless Cookware has exceptionally high thermoconductivity, and even a low setting on some gas burners will overheat or even burn foods such as thinly sliced onions. An inexpensive gas flame- tamer placed between the burner and the bottom of the pot solves this problem. Flame-tamers are readily available at most hardware stores.

n COOKING ON A GLASS STOVETOP To avoid scratching a glass cooktop, do not slide cookware on the glass surface. Please consult your glass cooktop manual for informa- tion and recommendations on use.

n FOR USE ON INDUCTION STOVETOPS Please consult your induction stovetop manual for information on use. Please always center the cooking vessel for optimal performance.

n COOKING TEMPERATURE IN OVEN Cuisinart MultiClad Pro Stainless Cookware can be used in the oven without damage. Naturally, the handle as well as the pan will become hot. Use potholders to prevent burns. The cookware can be used in the oven at any baking temperature up to 500F and can go from burner to broiler to table when placed on a heat-resistant trivet.

n TO BREAK A VACUUM SEAL The uniquely designed rims and covers form a perfect fit to reduce the evaporation of liquids. If you leave the cover on after turning the heat down or off, a partial vacuum may form, which will seal the lid to the pan. To break the seal, turn on the heat for a few moments, and the cover will come off easily. If you dont want the lid to seal to the pan, remove the cover or set it slightly ajar before turning off t

Manualsnet FAQs

If you want to find out how the MCP116-20N Cuisinart works, you can view and download the Cuisinart MCP116-20N Use and Care Guide on the Manualsnet website.

Yes, we have the Use and Care Guide for Cuisinart MCP116-20N as well as other Cuisinart manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Use and Care Guide should include all the details that are needed to use a Cuisinart MCP116-20N. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cuisinart MCP116-20N Use and Care Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cuisinart MCP116-20N Use and Care Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cuisinart MCP116-20N Use and Care Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cuisinart MCP116-20N Use and Care Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Cuisinart MCP116-20N Use and Care Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.