PG-39291-ESP 2020 Cuisinart
ASSEMBLY INSTRUCTIONS
MORE JUICE minus the mess.
Juice Fusion EasyClean Slow Juicer
QUICK REFERENCE GUIDE
BEFORE FIRST USE
OPERATING INSTRUCTIONS
Remove all packing materials and any promotional labels or stickers from your Cuisinart Slow Juicer. Be sure all parts (listed in Parts and Features) of your new appliance have been included before discarding any packing materials.
You may want to keep the box and packing materials for use at a later date.
Before using your Cuisinart Slow Juicer for the frst time, remove any dust from shipping by wiping the base with a damp cloth.
Thoroughly clean cover, pusher, feed tube with hopper, pulp container, juice container and plastic juice strainer assembly by hand or on top rack of dishwasher.
Never place the motor housing in the dishwasher or immerse it in water. Always use a damp cloth to wipe it clean.
1. Make sure your Slow Juicer is properly assembled. (See Assembly Instructions, below.)
2. Plug the power cord into a 120V electrical outlet.
3. Wash all selected fruits and vegetables.
4. Place fruits and vegetables into the feed tube with use of the pusher. Larger items can be added to the feed tube by lifting the hopper cap and placing directly on the plate hopper to juice.
5. While many fruits and vegetables will not need cutting, any item with a diameter larger than 2 inches will need to be cut.
6. Press ON when ready to begin.
REVERSE: Use this when needing to clear the auger to avoid clogging of the juicing area.
7. The juice will fow into the juice container and the pulp will accumulate in the pulp container.
8. When fnished juicing, press the STOP switch to stop the motor.
9. If the machine suddenly shuts down while operating, press the STOP switch frst and then press the REVERSE button. To make the food in the auger come up, release and then press the ON switch. Repeat 3 times.
a) When the machine is in reverse, gently press the lid to prevent the lid from becoming loose.
b) If the machine is still not working, disassemble it and then wash before trying again.
1 Place motor base on a clean, flat surface. Make
sure the motor base is unplugged from the power outlet (not shown).
2 Close the pulp spout. Cap will be securely
closed when you hear a click.
3Coloque el recolector de jugo, alineando
las columnas fijas en el recipiente para jugo.
4 Inserte el recolector de jugo en el punto
fijo de la carcasa.
5 Coloque el colador de jugo interno en el
colador de jugo externo (juntos, esto se conoce como el conjunto colador).
6Coloque el conjunto colador en el
recolector de jugo, presionando firmemente las orillas del filtro hasta que quede firme en su sitio.
7Coloque la barrena en el conjunto colador,
presionando firmemente hacia abajo hasta que quede firmemente en su puesto.
8Coloque la tapa sobre el recolector de
jugo. Alinea la flecha en la tapa con el smbolo de candado abierto en el bol. La tapa debe estar asentada uniformemente en el recolector de jugo. Gire la tapa en sentido horario hasta que se bloquee.
9Coloque el recipiente para jugo en el centro
delantero de la unidad y coloque el recolector de pulpa en el centro delantero del surtidor de pulpa.
10 Introduzca el empujador en la boca de
alimentacin, alineando las muescas en el empujador con la pequea ranura en el interior de la boca de alimentacin.
IMPORTANT! Do not discard. Read before operating your Slow Juicer.
Keep for future reference. These helpful hints are intended to be a supplement to the
Instruction Booklet. In order to ensure proper operation and optimum performance, please read the entire
Instruction Booklet.