Cuisinart DGB-850 Quick Reference PDF

1 of 4
1 of 4

Summary of Content for Cuisinart DGB-850 Quick Reference PDF

PG-36702

Quick Reference SETUP Guide

Troubleshooting

2.1.

3.

5.

4.

6.

Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes. Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds (see complete instructions on page 8 of your instruction booklet). Insert the filter into the water filter holder. Open the water reservoir and place filter holder into the unit.

Pour your desired amount of water into the water reservoir. A water level indicator is located on the side of the unit. Helpful Hint: Pre-heat your carafe by rinsing it out with hot water before brewing.

Open the filter basket door by pressing the Release button, and insert a paper filter or permanent filter into the filter basket holder. Replace the cover, and close door.

Remove hopper lid, fill with beans, and replace the lid.

To start grinding & brewing, press the BREW button. Once the coffee has finished brewing, five beeps will sound. The unit will immediately shut off. The thermal carafe will keep coffee hot for hours.

Press the ON/OFF button to turn on the coffeemaker. Select the amount of cups you wish to brew by turning the Grind Control knob. Select your desired coffee strength by pressing the Strength button. Your selected coffee strength will be indicated in the bar on the LCD display.

IMPORTANT Do not throw away. Read before operating your new

Brewing System. Keep for future reference.

These helpful hints are intended to be a supplement to the Instruction Booklet. In order to ensure safe operation and optimum performance, please read the entire Instruction Booklet.

Fully Automatic Burr Grind & Brew Thermal Coffeemaker

2017 Cuisinart

BEFORE FIRST USE

Before using your Cuisinart Fully Automatic Burr Grind & Brew Thermal Coffeemaker for the first time: BE SURE TO REMOVE POLYBAGS FROM CARAFE AND COFFEEMAKER. PLACE CARAFE BACK ONTO BASE. During the manufacturing process, dust can get trapped in your coffeemaker. We recommend flushing out the system before brewing your first pot of coffee. Simply follow Making Coffee with Pre- Ground Beans, page 10 in the Instruction Booklet. Skip step #1 and be sure to use only water and a paper filterno coffee! Once youve done that, brew a pot of real coffee and get ready to enjoy Cuisinart at its best!

PROBLEM CAUSE SOLUTION

The coffeemaker is beeping

Filter door is not closed Check to be sure that all components of the filter compartment are in place

Close filter door (you will hear a click if the door is properly shut)

Filter basket is not in place

Open filter door by pressing the filter door Release button

Hook filter basket with cover onto door

Close filter door (you will hear a click if the door is properly shut)

Coffee grounds and filter from previous use are still in filter basket

Remove filter and used coffee grounds Add new filter

The brew cycle will not start

There is no water in the water reservoir

Fill the water reservoir using the water level markings

Coffee is weaker than usual

There are not enough beans in the hopper

Be sure there are enough beans in your hopper for the amount of coffee you intend to brew

Strength setting is incorrect

Check your strength setting displayed on the LCD screen

To change your strength setting, press the Strength Control button

The coffeemaker is not grinding beans

The hopper may be too full

Turn the coffeemaker off and unplug

Remove some of the beans from the hopper

EMPTY appears in LCD display

Coffee grounds and filter from previous use are still in filter basket

Remove filter and used coffee grounds Add new filter

CLEAN is flashing on the LCD when the unit is turned on

Coffeemaker needs to be decalcified

Run a clean cycle follow the decalcification directions on page 11 of Instruction Booklet

The coffeemaker will not enter CLEAN mode

The water reservoir is empty

Fill the water reservoir with decalcification mixture before turning the coffeemaker on - Follow the decalcification directions on page 11 of Instruction Booklet

PERMANENT FILTER, FILTER BASKET, FILTER BASKET COVER, CARAFE AND LID.

Wash in warm, soapy water and rinse thoroughly or clean in the upper rack of the dishwasher. Dry all parts after every use.

TO CLEAN GRINDER OF COFFEE BEANS 1. Remove hopper cover. 2. Scoop out remaining beans from the hopper. 3. Place the clean, dry filter basket assembly in place (a paper filter can be used if desired).

4. Press the ON/OFF button to turn the coffeemaker on.

5. Press and hold down the Brew button until the coffeemaker begins to grind the beans.

6. After grinding stops, be sure to turn coffeemaker off. 7. Dispose of or re-purpose coffee grinds in filter basket. 8. Use a damp cloth to clean the hopper.

9. Leave the cover off to let the hopper dry completely before adding coffee beans.

To Set the Time: Press and hold the Hour or Minute button until the clock begins flashing. Hold down the Hour or Minute button to quickly scroll through the numbers. When desired time approaches, release the button and press repeatedly to advance one digit at a time. To finish, wait for the numbers to stop flashing.

1.

To Program Auto ON: Press the ON/OFF button, then press the Program button once until Auto ON is displayed on LCD. Hold the Program button until the clock begins flashing. Set the time you want coffee to begin brewing (follow Set the Time instructions). Once you are done setting the time, leave untouched. The clock will display the time of day and the Auto ON indicator, to remind you that the programming function is in use.

2.

Quick Reference PROGRAMMING Guide

Keeping It CLEAN

4. To start the brew cycle at the same time on another day, simply press the ON/OFF button and then press the Program button once. The Auto ON icon will be displayed on the LCD display.

At the programmed time, the white ON/OFF indicator light will come on, as well as BREW button light, indicating that the brew cycle is starting.3.

PG-36702-SP

Gua de referencia rpida/PREPARACIN

Resolucin de problemas

2.1.

3.

5.

4.

6.

Remoje el filtro de agua de carbn en agua fra por 15 minutos, asegurndose de que est completamente sumergido en el agua. Enjuague el filtro en agua fra por 10 segundos para limpiarlo, con las aberturas directamente bajo el flujo de agua (vase las instrucciones completas en la pgina 8 del manual de instrucciones). Introduzca el filtro de agua de carbn en el soporte. Abra el depsito de agua y coloque el filtro adentro.

Llene el depsito con agua hasta el nivel deseado. Guese con el indicador de nivel de agua en el costado de la unidad. Consejo til: Precaliente la jarra antes del uso, enjuagndola con agua caliente.

Abra el compartimiento del portafiltros, oprimiendo el botn de apertura de la puerta del compartimiento. Instale un filtro de papel o el filtro permanente. Cierre la tapa y la puerta.

Retire la tapa del depsito de caf, agregue granos de caf y coloque de nuevo la tapa.

Para empezar a moler y preparar caf, presione el botn BREW. Al final de la preparacin, la cafetera emitir cinco pitidos para avisarle que el caf est listo. La unidad se apagar inmediatamente. La jarra trmica mantendr en caf caliente por horas.

Oprima el botn ON/OFF para encender la cafetera; Seleccione la cantidad de caf en grano que desea moler, girando la perilla de ajuste de molienda (GRIND CONTROL). Seleccione la intensidad del caf, presionando repetidamente el botn STRENGTH. La barra en la pantalla indicar la intensidad seleccionada.

IMPORTANTE No tire este folleto a la basura. Lea esta informacin antes de usar su nueva

cafetera por primera vez. Guarde esta informacin para futura referencia.

Estos tiles consejos complementan el manual de instrucciones. Para lograr un rendimiento ptimo y una operacin segura, lea el manual de instrucciones.

Cafetera trmica automtica con molinillo incorporado Grind & Brew

2017 Cuisinart

ANTES DEL PRIMER USO

Antes de usar su cafetera trmica automtica Cuisinart Grind & Brew por primera vez: SAQUE LA JARRA Y LA CAFETERA DE LAS BOLSAS DE PLSTICO QUE LAS ENVUELVEN. COLOQUE LA JARRA EN LA BASE. Puede acumularse polvo en el aparato durante el proceso de fabricacin. Le recomendamos que limpie el sistema interno de la cafetera antes de preparar caf por primera vez. Para esto, haga funcionar la cafetera de acuerdo con las instrucciones en la seccin Cmo preparar caf con caf molido, pero usando solamente agua (no caf) y un filtro de papel. Ahora, puede disfrutar de una sabrosa taza de caf, 100 % Cuisinart!

PROBLEMA CAUSA SOLUCIN

La cafetera emite un pitido

La puerta del compartimiento del portafiltros no est debidamente cerrada

Asegrese de que todos los componentes del portafiltros estn correctamente instalados

Cierre la puerta del compartimiento del portafiltros (escuchar un clic que le indicar que est correctamente cerrada)

El portafiltros no est correctamente instalado

Abra el compartimiento del portafiltros, oprimiendo el botn de apertura de la puertat

Con la tapa correctamente colocada en el portafiltros, asegrese de que este est bien enganchado a la puerta del compartimiento

Cierre la puerta del compartimiento del portafiltros (escuchar un clic que le indicar que est correctamente cerrada)

El filtro y los posos de caf de la preparacin anterior an estn en el portafiltros

Saque el filtro y los posos Coloque un filtro nuevo

El ciclo de preparacin no empieza

El depsito de agua est vaco

Llene el depsito de agua con agua hasta el nivel deseado

El caf es menos fuerte que de costumbre

No hay suficiente cantidad de granos de caf en el depsito

Asegrese de que hay la cantidad suficiente de caf en grano para la cantidad de caf que quiera preparar

La intensidad del caf no es la correcta

Revise la intensidad del caf que aparece en la pantalla LCD

Para cambiar la intensidad del caf, presione repetidamente el botn STRENGTH

El molinillo no muele los granos de caf

Puede que el depsito de caf en grano est muy lleno

Ponga la perilla de control en OFF y desenchufe el cable

Saque un poco de granos de caf del depsito

EMPTY aparece en la pantalla LCD

El filtro y los posos de caf de la preparacin anterior an estn en el portafiltros

Saque el filtro y los posos Coloque un filtro nuevo

CLEAN parpadea en la pantalla LCD al encender la unidad

La cafetera debe ser descalcificada

Haga un ciclo de limpieza (vase las instrucciones de descalcificacin en la seccin Limpieza y mantenimiento del manual de instrucciones)

La cafetera no ingresa al modo CLEAN

El depsito de agua est vaco

Llene el depsito de agua con la mezcla de agua/vinagre recomendada en la seccin Descalcificacin del manual de instrucciones.

FILTRO PERMANENTE, PORTAFILTROS, TAPA DEL PORTAFILTROS, JARRA Y TAPA DE LA JARRA.

Estas piezas pueden lavarse a mano, con detergente y agua tibia, o en la bandeja superior del lavavajillas. Seque todas las piezas despus de lavarlas.

LIMPIEZA DEL MOLINILLO 1. Quite la tapa del depsito de caf. 2. Saque los granos de caf restantes. 3. Coloque el portafiltros limpio y seco en su puesto (puede usar un filtro de papel si desea).

4. Oprima el botn ON/OFF para encender la unidad.

5. Presione y mantenga oprimido en botn BREW hasta que la unidad empiece a moler el caf en grano.

6. Cuando el molinillo se apague, apague la cafetera. 7. Tire o use el caf molido que se encuentra en el portafiltros. 8. Limpie el depsito de caf con un pao ligeramente humedecido. 9. Permita que el depsito de caf se seque completamente (sin la tapa puesta) antes de agregar granos

de caf.

Cmo fijar la hora: mantenga oprimido el botn HR o MIN hasta que la hora empiece a parpadear. Mantenga oprimido el botn HR o MIN para desplazarse por las horas o los minutos ms rpidamente. Cuando llegue cerca del nmero deseado, suelte el botn y avance un nmero a la vez. Para terminar, espere hasta que los nmeros dejen de parpadear.

1.

Para programar el encendido automtico: presione el botn ON/OFF, y luego el botn PROG hasta que AUTO ON aparezca en la pantalla LCD. Mantenga oprimido el botn PROG hasta que la hora empiece a parpadear. Fije la hora a la cual desea que la cafetera se ponga en marcha, siguiendo las instrucciones para fijar la hora. Una vez fijada la hora, no toque nada y la cafetera saldr del modo de programacin automticamente. La pantalla mostrar la hora del da y el mensaje AUTO ON para recordarle que el encendido automtico est programado.

2.

Gua de referencia rpida/

Manualsnet FAQs

If you want to find out how the DGB-850 Cuisinart works, you can view and download the Cuisinart DGB-850 Quick Reference on the Manualsnet website.

Yes, we have the Quick Reference for Cuisinart DGB-850 as well as other Cuisinart manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference should include all the details that are needed to use a Cuisinart DGB-850. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cuisinart DGB-850 Quick Reference is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cuisinart DGB-850 Quick Reference consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cuisinart DGB-850 Quick Reference free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cuisinart DGB-850 Quick Reference, simply download the document to your computer. Once downloaded, open the PDF file and print the Cuisinart DGB-850 Quick Reference as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.