Cuisinart CPO-850 Quick Reference PDF

1 of 4
1 of 4

Summary of Content for Cuisinart CPO-850 Quick Reference PDF

GUA DE REFERENCIA RPIDA

PREPARACIN Y USO

2. Llene el depsito con agua hasta el nivel deseado. Guese con el indicador del nivel de agua en la parte delantera de la unidad.

4. Oprima el botn BREW/OFF para empezar el ciclo de enjuague. Al final del ciclo, su aparato est listo. Siga las instrucciones en la pgina 9 del manual de instrucciones para fijar sus preferencias y preparar su primera jarra de caf.

3. Instale el filtro permanente de acero inoxidable grabado con lser en el portafiltros. Cierre la tapa. Nota: asegrese de que el portafiltros est debidamente instalado y que la tapa est bien cerrada.

Remoje el filtro de carbn en agua fra durante 15 minutos, asegurndose de que est completamente sumergido en el agua.

Enjuague el filtro en agua fra durante 10 segundos para limpiarlo, con las aberturas directamente bajo el flujo de agua (vase las instrucciones completas en la pgina 8 del manual de instrucciones). Introduzca el filtro de carbn en el soporte. Abra el depsito de agua y coloque el filtro adentro.

1.

IMPORTANTE! No tire este folleto a la basura. Lea esta informacin antes de usar su nueva

cafetera por primera vez. Guarde esta informacin para futura referencia.

Estos tiles consejos complementan el manual de instrucciones. Para lograr un rendimiento ptimo y una operacin segura, lea el manual de instrucciones.

Vase las instrucciones de programacin al dorso.

2016 CuisinartPG-33914-ESP

To program the Auto On: Press and hold the AUTO ON button for 2 seconds. The digital display will flash the default (12:00) or previously selected time

and the AUTO ON button will flash. Follow directions under SETTING THE TIME (#1) to program your start-brew time. Five seconds after finishing, the unit will automatically exit Auto On Setup mode. AUTO ON will appear on the control panel and the AUTO ON button will illuminate, indicating AUTO ON is activated. NOTE: To exit Auto On Setup mode, you can also just press AUTO ON button again.

2.

4. To start the brew cycle at the same time the next day, simply press the AUTO ON button and release. Auto On will appear on the control panel and AUTO ON button will be illuminated.

3. At the programmed time, BREW/OFF will illuminate, indicating that the brew cycle is starting. AUTO ON will disappear from the LCD and the AUTO ON button will no longer be illuminated.

5. To program the Auto Off: Press the MENU button 3 times to get to the AUTO OFF Menu option. The digital display will flash the programmed Auto Off default (0:30) or

previously selected time. Follow directions under SETTING THE TIME to program coffee brewer to shut off from 0 to 2 hours after brew cycle is finished. To exit/confirm Auto Off time setting: Auto Off Setup mode will be exited automatically after 5 seconds.

To set the time: Plug in unit; 12:00 will flash in display for 30 seconds. If it stops flashing, press MENU button 4 times to return to CLOCK option. Press up p

button to set hour and q button to set minutes. Be sure PM indicator is on if desired. Press MENU to set selected time or, after 5 seconds, unit will exit Clock Setting mode.

1. PROGRAMMING

QUICK REFERENCE GUIDE

PurePrecision Pour-Over

Coffee Brewer

Please see reverse side for setup and use instructions.

QUICK REFERENCE GUIDE

SETUP AND USE

2. Pour desired amount of water into the water reservoir. A water level indicator is located on the front of the unit.

4. Select BREW/OFF to start the one-time rinse cycle. Once complete, your unit is ready to brew coffee. Follow instructions on page. 9 of instruction booklet to set preferences and brew your first pot.

3. Insert the permanent stainless steel laser- etched filter into the filter basket holder. Close the lid. Note: Check to make sure the filter basket is securely in place and lid is completely closed.

Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes. Flush filter by running cold tap water through holes in bottom of compartment for 10 seconds (see complete instructions on page 8 of your instruction booklet). Insert the filter into the water filter holder. Open the water reservoir and place filter holder into the unit.

1.

IMPORTANT! Do not throw away. Read before operating your new coffee brewer.

Keep for future reference.

These helpful hints are intended to be a supplement to the instruction booklet. In order to ensure proper operation and optimum performance, please read the entire instruction booklet.

Please see reverse side for programming instructions.

Para programar el encendido automtico: Mantenga oprimido el botn AUTO ON

durante 2 segundos. La hora por defecto (12:00) o la hora de encendido automtico previamente fijada aparecer en la pantalla. Utilice las fechas para programar la hora de encendido automtico. Cinco segundos despus de haber terminado la programacin, la unidad saldr automticamente del modo de programacin. AUTO ON aparecer en la pantalla y el indicador luminoso AUTO ON se encender para indicar que el encendido automtico ha sido activado. NOTA: para salir del modo de programacin en cualquier momento, presione nuevamente el botn AUTO ON.

2.

4. Si desea que la cafetera se ponga en marcha automticamente a la misma hora al da siguiente, simplemente presione el botn AUTO ON. AUTO ON aparecer de la pantalla y el indicador luminoso AUTO ON se encender.

3. A la hora prefijada, el indicador luminoso BREW/OFF se encender y el ciclo de preparacin empezar. AUTO ON desaparecer de la pantalla y el indicador luminoso AUTO ON se apagar.

5. Para programar el apagado automtico: Presione el botn MENU 3 veces hasta llegar a la opcin AUTO OFF. El tiempo de apagado automtico por defecto (0:30) o el tiempo previamente fijado

aparecer en la pantalla. Siga las instrucciones de la seccin CMO FIJAR LA HORA para programar otro tiempo de apagado automtico, desde 0 hasta 2 horas despus del final del ciclo de preparacin. Para salir del modo de programacin y confirmar el tiempo de apagado automtico: la cafetera saldr del modo de programacin automticamente despus de 5 segundos.

Cmo fijar la hora: Enchufe la unidad. 12:00 aparecer en la pantalla, parpadeando. Si deja de parpadear, presione el botn MENU 4 veces para

regresar a la opcin CLOCK. Utilice el botn p

Manualsnet FAQs

If you want to find out how the CPO-850 Cuisinart works, you can view and download the Cuisinart CPO-850 Quick Reference on the Manualsnet website.

Yes, we have the Quick Reference for Cuisinart CPO-850 as well as other Cuisinart manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference should include all the details that are needed to use a Cuisinart CPO-850. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cuisinart CPO-850 Quick Reference is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cuisinart CPO-850 Quick Reference consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cuisinart CPO-850 Quick Reference free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cuisinart CPO-850 Quick Reference, simply download the document to your computer. Once downloaded, open the PDF file and print the Cuisinart CPO-850 Quick Reference as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.