Cuisinart CHW-16 Quick Reference PDF

1 of 4
1 of 4

Summary of Content for Cuisinart CHW-16 Quick Reference PDF

Decalcification:

Cleaning Your Hot Water System:

Cleaning Your Coffeemaker:

Filter basket, carafe and lid:

Turn unit off and remove plug from outlet.

Wash filter basket, carafe and lid in warm, soapy water and rinse thoroughly, or clean in upper rack of dishwasher. Dry after cleaning.

Wipe area under the filter basket with a damp cloth. NOTE: DO NOT PUT ANY WATER IN THE UNIT ONCE FILTER BASKET IS REMOVED.

To clean base, wipe with damp cloth.

Do not use scouring pads or harsh cleaners on any parts of the coffeemaker. Never immerse base of unit in water.

A flashing CLEAN light indicates unit needs to be decalcified. Fill the water reservoir to capacity with a mixture of white vinegar and water. Press and hold CLEAN button; when light comes on, turn coffeemaker on. Five beeps sound when Clean cycle is complete; unit will shut off. Turn unit back on and if Clean light flashes, repeat process; if not, run a brew cycle with water only. Unit is then ready to use

We recommend you decalcify your hot water system twice a year.

Dispense any water in your reservoir until the Add Water displays on LCD. Add 32 ounces of white vinegar. Dispense 16 ounces of vinegar and discard; this will fill the inner tank. Let unit sit for 20 minutes, then turn off and allow hot vinegar to cool. Drain internal reservoir over sink by removing water release tab on bottom of unit. When vinegar has completely drained, replace tab. Refill reservoir with water and drain water as directed above. Unit is now ready to use.

2021 Cuisinart PG-39483A

2.To Program the Brew start time: Press and hold the PROG button for 2 seconds. The LED indicator and digital display will flash the

default (12:00) or previously selected time. Program the desired hour, using the HR and MIN buttons. Five seconds after finishing, the unit will automatically exit brew start time setup mode and the indicator light will illuminate, letting you know brew start time is activated.

4.The BREW/OFF/AUTO OFF indicator light will come on when brew cycle begins. The indicator light will turn off when the Keep

Warm cycle ends. To deactivate brew start time: Press illuminated PROG button; light will go off, indicating mode is turned off.

3.To activate Brew start time using previously selected time: Press the PROG button. Previously set time will appear and

indicator will light up. Display will return to clock setting.

5.To Program the Auto Off: Press and hold the BREW/OFF/AUTO OFF button for 2 seconds. The LED indicator and digital

display will flash the programmed Auto Off default (2:00) or previously selected time. Program the desired time, using the HR and MIN buttons.

1.To Set the Time: Setting Hours and Minutes: Press either button to select the desired time. Hold buttons down to scroll

through the digits quickly, or press and release to advance one digit at a time. Be sure the PM indicator is on if setting a PM time.

PROGRAMMING

QUICK REFERENCE GUIDE

12-Cup Programmable Coffeemaker & Hot Water System

Please see reverse side for setup and use instructions.

QUICK REFERENCE GUIDE

SETUP AND USE: Hot Water System

2.Fill the hot water reservoir with cold water to the maximum fill line.1.Fully immerse the charcoal water filter in

cold tap water and soak for 15 minutes. Insert filter into the water filter holder.

Open the water reservoir and insert filter into the unit (See complete instructions on page 8 of your Instruction Booklet).

IMPORTANT! Do not throw away. Read before operating your new coffeemaker.

Keep for further reference.

These helpful hints are intended to be a supplement to the Instruction Booklet. In order to ensure proper operation and optimum performance, please read the

entire Instruction Booklet.

3.Press the HOT WATER ON/OFF button. The HOT WATER ON/OFF button indicator light will illuminate. The Water Ready indicator

will flash while the unit is heating. Once the unit has heated, the Water Ready indicator will become solid.

4.Move safety switch left to unlock. The unit will dispense up to 13 oz. of hot water at a time. NOTE: Hot Water System works

independently of Coffeemaker; it can be filled and heated before, during, or after coffee is brewing.

Helpful Hint! We recommend flushing both

the Coffeemaker and Hot Water System before first use.

1. Coffeemaker: Fill the water reservoir with cold water and follow directions for brewing coffee, but DO NOT ADD COFFEE!

2. Hot Water System: Follow directions for using Hot Water System, then dispense all hot water to flush the system.

You are now ready to enjoy your new Cuisinart Coffeemaker & Hot Water System!

QUICK REFERENCE GUIDE

SETUP AND USE: Coffeemaker

2. Pour desired amount of water into water reservoir (a water level indicator is located on the side of the unit).

4. Check to make sure the filter basket is securely in place and lid is completely closed.3. Insert a #4 paper filter or permanent filter.

Be sure that a paper filter is completely open and fully inserted in the basket. It may

help to fold and flatten the seams of a paper filter beforehand. Add 1 level scoop of ground coffee per cup (maximum 15 scoops). Adjust the amount according to taste.

5.Setting Preferences: Push the 14 cup button if you are brewing fewer than 5 cups. Turn the Carafe Temperature dial to

Low (L), Medium (M), or High (H) and heater plate will keep coffee at the temperature you select.

6.To start brewing, press the BREW/OFF/ AUTO OFF button. When the brewing cycle has been completed, five beeps will sound.

1. Fully immerse the charcoal water filter in cold tap water and soak for 15 minutes. Insert filter into the water filter holder.

Open the water reservoir and insert filter into the unit (See complete instructions on page 8 of your Instruction Booklet).

Please see reverse side for Setup and Use: Hot Water System

Descalcificacin:

Limpieza del dispensador de agua caliente:

Limpieza de la cafetera:

Portafiltros, jarra y tapa:

Apague y desenchufe el aparato.

Lave el portafiltros, la jarra y la tapa en agua jabonosa tibia o en la bandeja superior del lavavajillas. Enjuague bien. Seque todas las piezas despus de la limpieza.

Limpie el rea bajo el portafiltros con un pao hmedo. NOTA: NO VIERTA AGUA EN EL DEPSITO DESPUS DE HABER SACADO EL PORTAFILTROS.

Limpie la base con un pao hmedo.

No use productos o materiales abrasivos para limpiar la unidad. Nunca sumerja la base de la unidad en agua.

Si la luz del botn de descalcificacin CLEAN empieza a parpadear, esto significa que hay que descalcificar la unidad. Llene el depsito de agua hasta la capacidad mxima con de vinagre y de agua. Mantenga presionado el botn CLEAN. Cuando la luz del botn CLEAN se encienda, encienda la unidad. Al final del ciclo de descalcificacin, la unidad emitir cinco pitidos y se apagar. Vuelva a encender la unidad. Si la luz del botn CLEAN sigue parpadeando, repita el proceso. Si no parpadea, repita el proceso con agua para enjuagar el sistema interno. La unidad est lista para su uso.

Se recomienda descalcificar el dispensador de agua caliente dos veces al ao.

Sirva agua hasta que el mensaje Add Water aparezca en la pantalla. Vierta 32 onzas (945 ml) de vinagre blanco en el depsito. Sirva 16 onzas (475 ml) de vinagre; esto llenar el depsito interno. Encienda la unidad y deje reposar el vinagre por 20 minutos. Luego, apague la unidad y permita que el vinagre se enfre. A continuacin, vace el depsito interno, quitando el tapn ubicado debajo de la unidad. Una vez vaco el depsito, cierre el tapn. Llene el depsito con agua y vacelo otra vez. La unidad est lista para su uso.

2.Para programar la hora de encendido automtico: Mantenga presionado el botn PROG por 2 segundos; la hora

por defecto (12:00) o la hora previamente fijada aparecer en la pantalla, parpadeando. Programe la hora deseada, usando los botones HR y MIN. Cinco segundos despus de terminar la programacin, la unidad saldr automticamente del modo de programacin y el indicador luminoso se iluminar para indicar que el encendido automtico ha sido activado.

4.El indicador del botn BREW/OFF/AUTO OFF se encender cuando empiece el ciclo de preparacin. Se apagar al final del ciclo mantener caliente.

Para desactivar el encendido automtico: Presione el botn PROG iluminado; la luz se apagar, lo que indica que el modo ha sido desactivado.

3.Para activar el encendido automtico usando una hora previamente fijada: Presione el botn PROG; la hora previamente fijada aparecer en la

pantalla y el indicador luminoso se iluminar. Luego, la hora regular aparecer en la pantalla.

5.Para programar el tiempo de apagado automtico: Mantenga presionado el botn BREW/OFF/AUTO OFF por 2 segundos; el tiempo

por defecto (2 horas) o el tiempo de apagado automtico previamente fijado aparecer en la pantalla, parpadeando. Programe el tiempo deseado, usando los botones HR y MIN.

1.Cmo fijar la hora: Presione el botn HR para fijar la hora y el botn MIN para fijar los minutos. Mantenga presionado el botn para desplazarse por

las horas o los minutos ms rpidamente, o presione el botn repetidamente para avanzar en incrementos de una hora o de un minuto. Compruebe que el indicador PM est en la pantalla si est fijando una hora de tarde/noche.

PROGRAMACIN

GUA DE REFERENCIA RPIDA

Cafetera programable de 12 tazas (1.75 L) & dispensador de agua caliente

Vase las instrucciones de preparacin y uso al dorso.2021 Cuisinart PG-39483A-SP

GUA DE REFERENCIA RPIDA

PREPARACIN Y USO: Dispensador de agua caliente

2.Llene el depsito de agua hasta la lnea MAX con agua fra.1.Remoje el filtro de agua de carbn en agua fra por

15 minutos, cerciorndose de que est completamente sumergido en el agua. Introduzca el

filtro de agua de carbn en el soporte. Abra el depsito de agua y coloque el filtro en la unidad (vase las instrucciones completas en la pgina 8 del manual de instrucciones).

IMPORTANTE! No tire este folleto a la basura.

Lea esta informacin antes de usar su nueva cafetera & dispensador de agua caliente Cuisinart por primera vez. Guarde esta informacin para

futura referencia.

Estos tiles consejos complementan el manual de instrucciones. Para lograr un rendimiento ptimo y una operacin segura, lea el manual

de instrucciones.

3.Presione el botn HOT WATER ON/OFF; el indicador luminoso del botn HOT WATER ON/OFF se encender. El indicador Water Ready (agua lista)

parpadear durante el calentamiento. Una vez caliente el agua, permanecer en la pantalla.

4.Deslice el botn de seguridad hacia la izquierda. La unidad servir 10 onzas (295 ml) de agua caliente a la vez. NOTA: El dispensador de agua

caliente funciona independientemente de la cafetera. Por lo tanto, puede calentar agua antes, durante o despus de preparar caf.

Consejo til! Se recomienda limpiar el sistema interno de la cafetera y del dispensador de agua

caliente antes del primer uso.

1. Cafetera: Llene el depsito de agua con agua fra y siga las instrucciones de preparacin, pero SIN USAR CAF!

2. Dispensador de agua caliente: Llene el depsito de agua hasta la lnea MAX y siga las instrucciones de la seccin Cmo conseguir agua caliente" del manual de instrucciones.

Ahora est listo/a para disfrutar de su nueva cafetera & dispensador de agua caliente Cuisinart!

GUA DE REFERENCIA RPIDA

PREPARACIN Y USO: Cafetera

2. Vierta agua en el depsito hasta el nivel deseado, guindose con el indicador de nivel de agua en el costado de la unidad.

4. Compruebe que el portafiltros est correctamente instalado y que la tapa est bien cerrada.3. Instale un filtro de papel n. 4 o un filtro permanente

Cuisinart. Compruebe que el filtro est completamente abierto y correctamente instalado.

Puede resultar til doblar y aplanar las costuras del filtro de papel de antemano. Agregue 1 cucharada llena de caf molido por taza (145 ml) de caf, hasta un mximo de 15 cucharadas. Ajuste la cantidad de caf molido a gusto.

5.Fije sus preferencias: Si desea preparar menos de 5 tazas de caf, presione el botn 14. Ponga el control de temperatura de la placa

calentadora (CARAFE TEMP) en el nivel deseado: L (baja), M (media) o H (alta).

6.Para iniciar el ciclo de preparacin, presione el botn BREW/OFF/AUTO OFF. Al final del ciclo de preparacin, la unidad emitir cinco pitidos. <

Manualsnet FAQs

If you want to find out how the CHW-16 Cuisinart works, you can view and download the Cuisinart CHW-16 Quick Reference on the Manualsnet website.

Yes, we have the Quick Reference for Cuisinart CHW-16 as well as other Cuisinart manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Quick Reference should include all the details that are needed to use a Cuisinart CHW-16. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cuisinart CHW-16 Quick Reference is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cuisinart CHW-16 Quick Reference consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cuisinart CHW-16 Quick Reference free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cuisinart CHW-16 Quick Reference, simply download the document to your computer. Once downloaded, open the PDF file and print the Cuisinart CHW-16 Quick Reference as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.