Crosley CR612B Radio Instructions Manual PDF

CR612B

Corsair Radio

Instruction Manual

Questions, problems, missing parts?

Before returning to the store, call Customer Service

8 a.m. 6 p.m., EST, Monday Friday

1-888-CROSLEY

www.crosleyradio.com/support

English

2

Safety Instructions

Read and understand this entire manual before using this product. Keep these instructions for future reference.

1. Do not use this product near water. 2. This product should be operated only by the type of power source indicated

on the marking label or in this instruction manual. 3. Do not defeat the safety purpose of the polarized plug. A polarized plug has

two blades with one blade wider than the other. This plug will fit into the power outlet only one way. If you are unable to insert the plug fully into the outlet try reversing the plug. If the plug should still fail to fit, contact your electrician.

4. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the product.

5. Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

6. Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

7. Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

8. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment.

9. Do not use attachments not recommended by the product manufacturer as they may cause hazards.

10. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn.

11. Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating. Do not block or cover these openings.

12. Unplug the product during lightning storm or when unused for long periods of time.

English

3

Items in this package

Before throwing away any packaging materials, please check thoroughly and

make sure you find the following items that come along with this package:

Radio

Please contact Crosley customer service if there is any accessory missing from

the package. Retain the original packaging materials for exchange or return

purposes.

Specifications

Power AC 120V ~ 60 Hz

Power consumption 20 W

Speaker 4 5W, 2.5

Frequency Range FM 87.5 108.5 MHz

AM 525 1710 KHz

Note:

Design and specifications are subject to change without notice.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers will

automatically cut-off. To turn power back on and resume playing, you will need to

turn off the power and turn it on again.

English

4

Product Description

1. Tuner Dial

2. LED Display

3. FM Stereo Indicator

4. Headphone Jack

5. Volume Knob

6. Tuning Knob

7. Power Button

8. Mode Button

9. Sleep Button

10. Alarm 1 Button

11. Alarm 2 Button

12. Time Button

13. AM/FM Button

14. Play/Pause Button

15. Stop Button

16. Display Button

17. CD Mode Button

18. Backward Skip Button

19. Forward Skip Button

20. Program Button

21. Snooze Button

22. CD Door Button

23. FM Wire Antenna

24. Battery Cover

25. AC Power Cord

English

5

Initial Setup

Essential Setup

1. Place the unit on a flat and level surface. The selected location should be

stable and free from vibration.

2. Remove the plastic bag covering the radio.

3. Press Open to open the CD Door.

4. Remove the cardboard shipping card from the CD Player.

5. Unwind FM Antenna and allow it to hang straight down.

6. Remove plastic bag covering the AC Power Cord.

7. Untie the AC Power Cord at the back of the unit.

8. Remove plug safety cover on the prongs of the plug.

9. Plug the AC cord into an appropriate outlet

Battery Backup

This Model includes a battery back-up circuit. The battery will maintain the clock

and alarm settings in the event of a power failure. The battery back-up requires

one 9V battery (not included). To install/replace the battery,

follow the instructions below.

1. Press in on the locking tab to remove the battery cover.

2. Attach a 9V battery to the battery contacts as shown.

3. Tuck the battery back into the battery compartment and

replace the battery cover.

Clock Setup

Setting the Clock

1. Press the Time button twice, and the hour digits will start flashing.

2. Press the Backward or Forward Skip buttons to adjust the hour while the

digits are flashing.

3. Press the Time button, and the minute digits will start flashing.

4. Press the Backward or Forward skip buttons to adjust the minute while the

digits are flashing.

5. Press the Time button to set the clock.

6. Long press the Time button to switch between 12 and 24 hour mode.

English

6

Setting the Alarm

The alarm function allows you to set two alarms to ring at different times.

1. Press Alarm 1 or Alarm 2 button. The clock display will switch to alarm time

and start to flash. The corresponding Alarm LED will come on.

2. Press the Time button and use the Forward or Backward Skip buttons to set

the hour.

Note: The PM LED will come on to denote PM hour in 12 hour mode.

3. Press the Time button and use the Forward or Backward Skip buttons to set

the minutes.

4. Press the Time button and set the alarm mode (Buzz, CD, or Radio). Use the

Forward or Backward Skip buttons to select the mode.

5. Press the Time button and the alarm will be set.

6. Once set, the alarm will go off once the clock reaches the set alarm time. The

set Alarms LED will begin to flash.

7. To stop the alarm while it is going off, press the Alarm button.

8. To turn off the alarm function, press the corresponding Alarm button again,

and the Alarm LED light will go off.

Snooze the alarm

1. When the Alarm is going off, press the SNOOZE button.

2. After 9 minutes, the alarm will go off again.

3. To stop the alarm while it is going off, press the Alarm button.

Radio Operation

1. Press the Power Button to turn the unit on.

2. Press the Mode Button to the Radio mode (rA)

3. Press the AM/FM Button to the desired tuning band.

4. Rotate the Tuning Knob for desired radio station.

The unit is equipped with a FM wire antenna. To FM improve reception, move the

wire around until the reception is clear without interferences. Do not connect the wire

to any additional antenna.

The AM antenna is built inside the unit. If AM reception is poor, try to rotate the unit

for better reception.

Set the Sleep Timer

1. Press the Sleep button on the unit repeatedly to select your desired number

of minutes. The number of minutes shown will display in this sequence:

90 60 30 15 OFF

2. Stop pressing the Sleep button when your desired number of minutes is

displayed. The sleep timer is now set.

English

7

3. To cancel the sleep timer, press the Sleep button repeatedly until OFF

shows on the display.

CD Playback Operation

1. Press the Power Button to turn the unit on.

2. Press the Mode Button to the CD mode (CD)

3. Press the CD Door Button to open the CD tray and put the CD in the tray with

the labeled side facing up.

4. Manually close the CD Door. The LED display will show -- for a few

seconds, then the total number of tracks on the CD. If it is a blank CD or an

unrecognizable CD, it will show NO.

Note: MP3 or similar types of digital audio files cannot be read by the CD player.

5. Press the Play/Pause button to start the playback.

6. During the playback, press the Play/Pause button to pause. Press it again to

resume playback.

7. To skip to the next or previous track, press the Forward Skip or Backward

Skip button correspondingly.

8. To search fast forward or backward a track, press and hold the Forward Skip

or Backward Skip button correspondingly until you reach the desired time.

Release the button and the playback will resume.

9. To repeat a specific track, press CD Mode button once while that track is

playing and the repeat indicator will start flashing. To repeat all the tracks,

press the CD Mode button twice and the repeat indicator will remain on. To

randomize all of the tracks, press the CD Mode button three times, and the

random indicator will remain on. To cancel repeat functions and random

function, press the CD Mode button four times.

10. Press the Stop button if you want to completely stop playback.

Programmed Playback

1. Before starting the playback, press the Program button once to enter

program mode. Program Indicator will start flashing. The LCD display will

flash P - 01 as the track sequence which is to be edited.

2. Press the Forward Skip or Backward Skip buttons to select the desired

track that you would like to play. The LEDs number will turn steady

instead of flashing, showing the sound track number at selection.

3. Press the Program button to confirm the selected track. The LEDs

number will start flashing again showing the next track sequence which is

to be edited.

4. Repeat steps 2 & 3 for additional sound tracks that you would like to play.

The tracks can be in any number and repeated. A maximum of 20 tracks

can be programmed at one time.

English

8

5. Press Play/Pause button to start the programmed playback. The tracks

will play in the same sequence that you programmed earlier.

6. To exit the program mode, press the Stop button twice and the Program

Indicator will be off.

Bluetooth Operation

1. Press the Mode button to Bluetooth mode , you will hear an activation sound

from the unit.

2. Turn on the Bluetooth feature of your audio device, search for CROSLEY

CR612B and pair.

3. Once your device is successfully paired with the unit, you will hear a short

confirmation sound from the unit.

4. Play and stream music from your device to the unit.

Note: Bluetooth Version 4.1

Troubleshooting

There is no power

No power at the power outlet.

To help save power consumption, some models will comply with ERP energy

saving standard. When there is no audio input for 20 minutes, their powers

will automatically cut-off. To turn power back on and resume playing, turn off

the power and turn it on again.

CD does not play

Function mode is not set to CD.

The CD is blank.

The CD is placed on the tray incorrectly with the label side facing down.

The CD has unsupported digital audio files like MP3 and similar types of

format.

The CD has too many scratches or is dirty.

English

9

FCC Statements

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the

receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15