Crosley CR55 Phone Instructions Manual PDF

1 of 7
1 of 7

Summary of Content for Crosley CR55 Phone Instructions Manual PDF

910-237000-0060-200

Instruction Manual

Crosley 302 Wall Phone

CR55

www.crosleyradio.com

1

IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions, should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following:

1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol

cleaners.Use a damp cloth for cleaning. 4. Do not place this product on an unstable cart, stand or table. The product may fall, causing

serious damage to the product. 5. Slots and openings in the cabinet and back or bottom are provided for ventilation, to protect

it from overheating, these openings must not be blocked or covered. The openings should never be blocked by placing the product on the bed, sofa, rug, or other similar surface. This product should never be placed near or over a radiator or heat register. This product should not be placed in a built-in installation.

6. Never push objects of any kind into this product through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.

7. To reduce the risk of electric shock, do not disassemble this product. Take it to a qualified serviceman when some service or repair work is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect re-assembly can cause electric shock when the appliance is subsequently used.

8. Unplug this product from the wall outlet and refer servicing to qualified service personnel in the following cases: A. When the power supply cord or plug is damaged or frayed. B. If liquid has been spilled into the product. C. If the product has been exposed to rain or water. D. If the product does not operate normally by following the operating instructions. Adjust

only those controls, that are covered by the operating Instructions because improper adjustment of other controls may result in damage and will often require extensive work by a qualify technician to restore the product to normal operation.

E. If the product has been dropped or the cabinet has been damaged. F. If the product exhibits a distinct change in performance.

9. Do not allow anything to rest on the power cord. Do not locate this product where the cord will be abused by persons walking on it.

10. Do not use this product near water, for example , near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool.

11. Avoid using a telephone (other than a cordless type) during an electric strom. There may be a remote risk of electric shock from lighting.

12. Do not use the telephone to report a gas leak in the vicinity of the leak. 13. Use only the power cord and batteries indicated in this manual. Do not dispose of batteries

in a fire. They may explode. Check with local codes for possible special disposal instructions.

SAVE THESE INSTRUCTIONS

ENGLISH

ENGLISH

SET UP DIAL MODE The DIAL MODE switch is located at the back of the telephone. Slide the switch to TONE unless you have Dial-Pulse (Rotary) telephone service in your area, in which case, slide the switch to the PULSE position.

MECHANICAL BELL RINGER CONTROL The RINGER CONTROL switch at the back of the telephone allows you to turn the ringer ON or OFF. You can still make or receive calls with the ringer in OFF position, however, you will not hear the incoming ring.

RECEIVER VOLUME The RECEIVER VOLUME CONTROL switch, located on the bottom of the telephone, allowsyou to adjust the volume of the receiver earphone from LOW and HI.

INSTALLATION To connect the telephone, connect the line cord from the back of the telephone to the wall jack.

MAKING AND ANSWERING CALLS To get a dial tone or answer an incoming call, lift the handset. To hang up, either replace the handset or press the HANDSET CRADLE manually.

FLASH Pressing FLASH sends the electronic equivalent of a switchhook signal. Use FLASH with special phone company services such as call waiting.

IF THERE IS NO DIAL TONE 1) Make sure that all plugs are connected properly. Check the connections at the wall jack,

the telephone cabinet and handset. 2) Try another modular jack within your home which you know to be working properly.

IF CALLS CANNOT BE DIALED OR DIALS SLOWLY Check to make sure that the DIAL MODE switch is in the correct position for the type of service (TONE/PULSE)available in your area.

IF THE TELEPHONE DOES NOT RING Check that RINGER CONTROL switch is not set to OFF. If there are several telephones connected to the same line, try disconnecting some of the other telephones. Having too many telephones connected to the same line can cause low ringer volume or poor sound quality during calls.

CARE AND MAINTENANCE Avoid rough treatment to the telephone. Do not drop the handset and always place it gently back in the cradle. Clean only with slightly dampened cloth. Do not use detergent, wax, solvent, spray, alcohol or excessive water.

USE THIS TEMPLATE TO DETERMINE THE POSITION OF

TELEPHONE ON WALL, AND WHERE TO LOCATE

SCREW HOLES.

USE ONLY FOR WALL INSTALLATION OF TELEPHONE SET

TOP

MOUNTING HOLE A

REMOVE TEMPLATE FROM WALL BEFORE INSERTING

PLASTIC ANCHORS OR SCREWS

MOUNTING HOLE B

ENGLISH

2

FCC Requirements 1. This equipment complies with 47CFRPart 68 and ACTA technical requirements.

On the bottom of this equipment is a label that contains, among other information, the registration number and ringer equivalence number (REN) for this equipment. If requested, this information must be provided to the telephone company.

2. The USOC number of the registration jack for the equipment is RJ11C/RJ11W. 3. A FCC compliant telephone cord and modular plug is provided with this equipment.

Thisequipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is TIA/EIA-IS-968 compliant. See Installation Instructions details.

4. The REN is used to determined the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing is response to an incoming call. In most, but not all areas, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.

5. If this terminal equipment causes harm to the telephone network, the telephone company will notify you in advance that temporary discontinuance of service may be required. But if advance notice isnt practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a compliant with the FCC if you believe it is necessary.

6. The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted services.

7. The equipment cannot be used on public coin phone service provided by the telephone company. Connection to party line service is subject to state tariffs.

8. Please follow instructions for repairing if any (e.g. battery replacement section), otherwise do not alternate or repair any parts of device except specified.

9. This equipment if it uses a telephone handset is hearing aid compatible. 10.If trouble is experienced with this equipment, for repair or warranty information,

please contact service center at the below. If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

ENGLISH

PARTS INCLUDED Your new telephone includes the following items: 1 - Telephone handset 1 - Handset coil cord 1 - Telephone body 1 - 7 Foot line cord 1 - 15 Inch line cord 2 - Screws with wall archors 1 - Wall mounting template. 4 - Rubber spacer pads. 2 - Tapping screw 1 - Template (See above picture and instructions)

PINGER OFF / ON

PULSE / TONE

VOLUME LOW / HI

ENGLISH

HANDSET CORD JACK

LINE CORD JACK PRESS FOR

FLASH

PRESS FOR REDIAL

ENGLISH

LIMITED MANUFACTURERS WARRANTY Crosley Radio, Inc. warrants the product to be free from defects in material and workmanship under normal use for a period of one year from the original date of purchase. This warranty is not transferable. If the product is determined to be defective during the warranty period, the unit will be repaired or replaced at Crosley Radios sole discretion. This warranty covers manufacturing defects and normal consumer use and does NOT cover damage or failure as a result of abuse, accident, alterations, misuse, neglect, abnormal wear and tear, inadequate maintenance, commercial or unreasonable use, damage caused by power surges, mishandling, accident, acts of God or attempted repair by an unauthorized service agent. Also not covered are cosmetic damages, cords and antennas.

Should this product fail to function in a satisfactory manner, it is best to first return it to the store or retailer where it was originally purchased. If additional service is still needed, the original purchaser must FIRST contact our offices to obtain an RA (Return Authorization) Number.

TO OBTAIN AN RA NUMBER CALL: 1.888.CROSLEY

(1.888.276.7539)

Send the unit prepaid to the address below in the original packaging (or reasonable substitute to prevent damage). Clearly mark your RA number on the outside packaging and include the original sales receipt (or a copy) indicating date of purchase, amount paid, and place of purchase. You must also include your full name, shipping address and daytime contact number. Please include a check or money order in the amount of $19.95, made payable to Crosley Radio, to cover handling and return shipping charges. Returned products will not be shipped to PO Boxes. Crosley Radio will not be responsible for delays or unprocessed claims resulting from a purchasers failure to provide any or all of the necessary information.

CROSLEY RADIO ATTN: RETURNS DEPT

2001 PRODUCTION DRIVE Louisville, KY 40299

For additional support: Crosley Radio Consumer Service Department 24 hours a day / 7 days a week Telephone: 1.888.CROSLEY (1.888.276.7539)

There are no express warranties except as listed above. The purchasers bill of sale is the only proof of warranty entitlement.

This warranty gives the purchaser specified

Manualsnet FAQs

If you want to find out how the CR55 Crosley works, you can view and download the Crosley CR55 Phone Instructions Manual on the Manualsnet website.

Yes, we have the Instructions Manual for Crosley CR55 as well as other Crosley manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Instructions Manual should include all the details that are needed to use a Crosley CR55. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Crosley CR55 Phone Instructions Manual is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Crosley CR55 Phone Instructions Manual consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Crosley CR55 Phone Instructions Manual free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Crosley CR55 Phone Instructions Manual, simply download the document to your computer. Once downloaded, open the PDF file and print the Crosley CR55 Phone Instructions Manual as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.