Clarke 3501030 HDT1200 Folding Tables Instructions PDF

FOLDING TABLES MODEL NO: HDT855, HDT1200, HDT1830

HDB1830 & HDT2440

ASSEMBLY INSTRUCTIONS

ORIGINAL INSTRUCTIONS GC0421 - rev 1

P

INTRODUCTION

Thank you for purchasing this CLARKE product. Before using this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

ENVIRONMENTAL PROTECTION Do not dispose of this product or any unwanted materials with general household waste. All accessories and packaging should be sorted, taken to a recycling centre and disposed of in a manner which is compatable with the environment.

MODEL SPECIFICATIONS

GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Model Number

Part No Dimensions (LxWxH) mm

Weight Max load capacity

HDT855 3501035 867 x 867 x 739 9.4 kg 125kg

HDT1200 3501030 1225 x 613 x 735 9.25 kg 125kg

HDT1830 3501000 1830 x 760 x 740 16.4 kg 160kg

HDB1830 3501020 1830 x 250 x 400 8.15 kg 160kg

HDT2440 3501005 2440 x 760 x 740 21.4 kg 160kg

2 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

SAFETY PRECAUTIONS Failure to heed these warnings could result in personal injury or property damage.

1. Do not exceed the load capacity of the table. (Maximum load in spec).

2. Do not stand on the table. Falling could result in personnal injury.

3. Do not put hot dishes or items (over 100oC) directly on the table.

4. Do not position close to naked flames or sources of ignition.

USING THE 855 TABLE 1. Lay the top face down on a soft

surface to protect the top from scratches.

2. Unfold the legs completely by placing one foot on the table as shown and pulling the legs towards you as in Fig 1.

3. Pull the legs until they form a right angle with the table top.

4. Ensure that the arms are straight and that locking tabs engage with the slots in the corresponding arm member as shown in Fig 2.

5. When folding the table away, the legs, which are retained by the spring clip must be folded last, as these will retain the first pair of legs as in Fig 3.

6. Store the table on its side avoid laying flat, or under heavy pressure.

CAUTION: TAKE CARE NOT TO PINCH YOUR FINGERS BETWEEN THE HINGED ARM COMPONENTS WHERE SHOWN IN FIG 2.

3 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

USING THE 1200 TABLE 1. Lay the table with the legs up and

completely unfold them.

2. Pull the legs until they form a right angle with the table top before turning the table over.

3. Ensure that the metal rings slide down into position as in Fig 4, to prevent the hinged leg assemblies from folding up inadvertently.

4. When folding away, ensure the legs are retained by the spring clips shown in Fig 5.

5. Store the table on its side avoid laying flat, or under heavy pressure.

UNFOLDING THE HDT1830/HDT2440 TABLES AND HDB1830 BENCH 1. Use the hand grips at each end to

unfold the table to its full extent before standing upright. The help of an assistant may be useful. Unfold and lock the legs as in Fig 4.

2. When folding away, snap the spring clips into the oppsite side of the table to secu