Contents

Clarke 7633020 CTC105 Tool Chest Instructions PDF

1 of 1
1 of 1

Summary of Content for Clarke 7633020 CTC105 Tool Chest Instructions PDF

UNPACKING AND ASSEMBLY INSTRUCTIONS

Thank you for purchasing your new Clarke Tool Storage Unit Mobile Cabinet. Below you will find some useful assembly information.

Included with your Tool Storage Unit you will find the following.

1. Side mounted handle - One handle is included with each Storage Unit. The Handle and its mounting hardware is located inside one of the drawers, The handle may be mounted to either side of the unit, depending upon where you intend to position it in your work area. Make sure that the swivel castors are installed on the same side of the unit as the handle, to make steering easier,

2. Castors - Your Storage Unit includes castors which need to be installed. You will find the castors and castor mounting hardware located in a cardboard box inside one of the drawers of the Unit

If your Storage unit castor mounting hardware includes flat washers, install as illustrated in Fig 1. Carefully turn Storage Unit upside down. Line up castor plate with the threaded holes in bottom of unit. Slide bolt through washer, castor plate and into Storage Unit, Tighten with spanner. Repeat for remaining bolts and castors.

If your Tool Storage Unit castor mounting hardware includes spacers, install as illustrated in Fig 2. Carefully turn the unit upside down. Line up the spacers with the threaded holes in bottom of unit. Line up castor plate on top of spacers and insert bolts through castor plate, spacers and threaded holes of Storage Unit. Tighten with spanner. Repeat for remaining bolts and castors.

Clarke HD Plus Tool Storage Units include Ball Bearing Drawer Slides and foam drawer liners.

Drawers can be removed following these easy steps:

1. Press lever on left side of drawer DOWN, Press lever on right side of drawer UP

2. With levers pressed as described In step 1, pull drawer from Tool Storage Unit,

When

Manualsnet FAQs

If you want to find out how the 7633020 Clarke works, you can view and download the Clarke 7633020 CTC105 Tool Chest Instructions on the Manualsnet website.

Yes, we have the Unpacking and Assembly Instructions for Clarke 7633020 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Unpacking and Assembly Instructions should include all the details that are needed to use a Clarke 7633020. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 7633020 CTC105 Tool Chest Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 7633020 CTC105 Tool Chest Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 7633020 CTC105 Tool Chest Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 7633020 CTC105 Tool Chest Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 7633020 CTC105 Tool Chest Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.