Contents

Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions PDF

1 of 12
1 of 12

Summary of Content for Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions PDF

ELECTRIC STAPLER & NAILER MODEL NO: CESNG1

PART NO: 6462560

OPERATION & MAINTENANCE INSTRUCTIONS

LS0414

P

INTRODUCTION

Thank you for purchasing this CLARKE product.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

2 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

SAFETY INSTRUCTIONS

For safe operations:

1. Keep work area clean. - Cluttered areas and benches invite injuries.

2. Consider work area environment. - Do not expose power tools to rain. Do not use power tools in damp or wet locations. Keep work area well lit. Do not use power tools where there is risk to cause fire or explosion.

3. Guard against electric shock. - Avoid body contact with earthed or grounded surfaces (e.g. pipes, radiators, ranges, refrigerators).

4. Keep children away. - Do not let visitors touch the tool or extension cable. All visitors should be kept away from area.

5. Store idle tools. - When not in use, tools should be stored in a dry, high or locked up place, out of reach of children.

6. Do not force the tool. -It will do the job better and safer at the rate for which it was intended.

7. Use the right tool. - Do not force small tools or attachments to do the job of a heavy duty tool. Do not use tools for purposes for which it was not intended.

8. Dress properly. -Do not wear loose clothing or jewellery, they can be caught in moving parts. Rubber gloves and non-skid footwear are recommended when working outdoors. Wear protecting hair covering to contain long hair.

9. Use safety glasses. - Always wear suitable eye protection, manufactured to the latest European Safety Standards, when firing the stapler/nailer. Eyeglasses are not safety glasses

10. Do not abuse the cable. - Never carry the tool by the cable or yank it to disconnect it from the socket. Keep the cable a way from heat, oil and sharp edges.

11. Secure work. - Use clamps or a vice to hold the work. It is safer than using your hand and it frees both hands to operate the tool.

12. Do not overreach. - Keep proper footing and balance at all times.

13. Maintain tool with care. - Inspect tool cable periodically and if damaged have it repaired by an authorized service facility. Inspect extension cables

WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS, INCLUDING THE FOLLOWING, SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONAL INJURY.

WARNING: READ ALL THESE INSTRUCTIONS BEFORE OPERATING THIS PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

3 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

periodically and replace, if damaged. Keep handles dry, clean and free from oil and grease.

14. Disconnect tools. - When not in use, before servicing and when changing accessories such as blades, bits and cutters.

15. Avoid unintentional starting. - Do not carry a tool with a finger on the switch.

16. Use outdoor extension leads. - When tool is used outdoors, use only extension cables intended for outdoor use.

17. Stay alert. - Watch what you are doing. Use common sense. Do not operate tool when you are tired.

18. Check damaged parts. - A guard or other part that is damaged should be properly repaired or replaced by an authorized service centre unless otherwise indicated in this instruction manual. Have defective switches replaced by an authorised service facility. Do not use the tool if the switch does not turn it on and off.

19. Warning. - The use of any accessory or attachment, other than those recommended in this instruction manual, may present a risk of personal injury.

20. Have your tool repaired by a qualified person. - This electric tool is complies with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

MACHINE SPECIFIC 1. Secure the workpiece. A workpiece held with clamping devices or in a

vice is held more secure than by hand.

2. Before any work on the machine itself (e.g. maintenance) as well as during transport and storage, switch the machine off and remove the plug from the power supply.

3. Keep your fingers away from the stapler/nailer head. There is danger of injury when unintentionally actuating the On/ Off switch.

4. Never point the machine at persons or animals. Staples or nails shot from a short distance can cause considerable injuries.

5. Do not use the machine to fasten electrical wiring. Contact with electric wires can lead to fire and electric shock.

4 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

SAFETY SYMBOLS

SAFETY SYSTEM

FULL SEQUENTIAL ACTUATION This stapler/nailer has an actuation system in which the trigger and safety yoke are linked in such a way that it will only operate if the trigger is pulled after the safety yoke (muzzle) has been applied to the work. Further driving operations require the user to release the trigger and lift the safety yoke (muzzle) away from the workpiece before the next use.

Read manual before use

Wear suitable eye protection

5 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

ELECTRICAL CONNECTIONS

Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved BS1363/A plug fitted with a BS1362 fuse.

If the plug has to be changed because of damage, it must be removed and a replacement fitted, following the wiring instructions shown below. The old plug must be discarded safely, as insertion into a power socket could cause an electrical hazard.

The BLUE wire must be connected to the terminal which is marked N or coloured black.

The BROWN wire must be connected to the terminal which is marked L or coloured red.

This symbol indicates that this is a Class II product, and does not require an earth connection.

We strongly recommend that this machine is connected to the mains supply through a Residual Current Device (RCD)

If you are not sure, consult a qualified electrician. DO NOT try to do any repairs.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

WARNING: WIRES IN THE MAINS LEAD ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: BLUE = NEUTRAL, BROWN = LIVE.

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral (Blue)

Live (Brown)

a 5 Amp

the cable is firmly held by the clamp

fuse.

6 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

PREPARING THE STAPLER/NAILER FOR USE

FILLING THE MAGAZINE

1. Press and hold the magazine catch (1) then pull out the magazine (2).

2. Turn over the stapler/nailer and insert the staple strip or the nail strip.

Hold the stapler/nailer at a slight angle while inserting the nail strip so that nails rest against the side wall.

Nails should be placed against the side of the chamber which has a dip in it (Left side when the tool is inverted and the yoke is furthest away from the user).

Only those fasteners stated in the specification should be used.

3. Close the magazine.

Make sure it clicks shut.

WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG FROM THE MAINS POWER SUPPLY BEFORE FILLING THE MAGAZINE.

CAUTION: KEEP YOUR FINGERS WELL AWAY FROM THE TRIGGER,

7 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

USING THE STAPLER/NAILER

1. Pay attention to all of the safety warnings in these operating instructions.

2. Set the ON/OFF switch to the ON position.

3. Press the stapler/nailer against the work and pull the trigger.

Always hold the stapler/nailer square to the workpiece, never at an angle.

4. Release the trigger and lift the stapler/nailer away from the workpiece.

5. Repeat steps 3-4 as required.

6. In the event of long breaks in work or at the end of the working shift:-

Switch off the stapler/nailer,

Remove the mains plug from the power supply,

Empty the magazine.

TIPS

Do not intentionally activate the stapler/nailer if the magazine is empty.

Do not attempt to staple/nail at the edge of a workpiece, the edge could fail, causing a nail or staple to shoot straight through.

TO CLEAR A JAM Do not pull the trigger until the jam has been cleared, as this could cause serious damage:

1. Release the magazine catch and slide the magazine open.

2. Remove all staples/nails from the chamber.

3. Using pliers, grip the jammed fastener and pull firmly to dislodge it.

4. Once the jammed fastener is removed, reload and continue.

WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG FROM THE MAINS SUPPLY BEFORE CLEARING A JAM.

8 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

MAINTENANCE

The stapler/nailer does not require any specific maintenance other then keeping it free from any dirt or debris. This can be done using a clean dry cloth and/or brush. Do not use solvent or alcohol based cleaner as it could damage the casing.

There are no user serviceable parts on the stapler/nailer. If there is a problem please contact your nearest CLARKE dealer.

Do not open the casing, the guarantee will be void if the casing has been opened or if the stapler/nailer has been tampered with.

The use of parts other than CLARKE replacement parts may result in safely hazards, decreased tool performance and will invalidate your warranty.

WARNING: SWITCH OFF THE STAPLER/NAILER AND REMOVE THE PLUG FROM THE MAINS POWER SUPPLY BEFORE CARRYING OUT ANY SERVICING OR MAINTENANCE

9 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

SPECIFICATION

Input Voltage 230V, 50Hz, 1Ph

Max Firing Speed 20 shots/min.

Maximum Magazine Capacity 100 Nails or 100 Staples

Nail Type F-Type 18 gauge/ 15mm Brad Nail

Staple Type Type 53 staples of sizes 8mm, 10mm, 12mm, 14mm, 16mm

Dimensions 280 x 170 x 65 mm

Weight 1.28 kg

Activation Mode Full Sequential Actuation

Noise Characteristic Values In Accordance With EN12549.

Sound Pressure: 73.3 dB(A)

Sound Power Measured LwA 86.3dBLwA

Vibration Characteristic Values In Accordance With ISO 8662-1 1: 1999

2.971 m/s2

10 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

<

Manualsnet FAQs

If you want to find out how the 6462560 Clarke works, you can view and download the Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions on the Manualsnet website.

Yes, we have the Operation and Maintenance Instructions for Clarke 6462560 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation and Maintenance Instructions should include all the details that are needed to use a Clarke 6462560. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 6462560 CESNG1 Electric Stapler Nailer Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.