Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions PDF

1 of 4
1 of 4

Summary of Content for Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions PDF

3 IN 1 ROLLER STAND MODEL No: CBS4

Part No: 6500958

ASSEMBLY INSTRUCTIONS

1108

2

INTRODUCTION

Thank you for purchasing this CLARKE 3 in 1 roller stand.

Before using the roller stand, please read this instruction manual thoroughly and carefully follow all directions given. This is for your own safety and for that of others around you, and will also help you achieve long and trouble free service from your roller stand.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ASSEMBLY

1. Remove the roller stand from the box.

2. Open the legs of the stand as shown on the right.

The legs must be fully opened before the roller stand is used

3

ADJUSTMENTS

ADJUSTING THE HEIGHT 1. Rotate the handle anticlockwise until

it is loose.

2. Lift the roller head to the desired height.

Minimum height is 700 mm

Maximum height is 1100 mm

3. Rotate the handle clockwise to lock the roller into position.

MAXIMUM WEIGHT CAPACITY The weight capacity of this unit varies according to the height of the roller.

Height is set to minimum Maximum load = 90 kg

Height is set to mid way Maximum load = 60 kg

Height is set to maximum Maximum load = 45 kg

USING THE ROLLER STAND

When feeding the workpiece over the roller stand, always feed it from the rear of the stand as shown on the right, this will increase the stability of the stand.

CONFIGURATION There are 3 configurations in which you can use this roller stand, simply rotate the head to the required configuration.

ROLLER CONFIGURATION: Allows the workpiece to be moved along one plane

BALL ROLLER CONFIGURATION: Allows the workpiece to be moved along two planes

STAND CONFIGURA

Manualsnet FAQs

If you want to find out how the 6500959 Clarke works, you can view and download the Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions on the Manualsnet website.

Yes, we have the Assembly Instructions for Clarke 6500959 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Assembly Instructions should include all the details that are needed to use a Clarke 6500959. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 6500959 CBS4 3 in 1 Roller Stand Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.