Clarke 3402025 10 Ton Log Buster 4 Instructions PDF

1 of 12
1 of 12

Summary of Content for Clarke 3402025 10 Ton Log Buster 4 Instructions PDF

1603 ISS 4

MODEL NO: Log Buster 4 PART No: 3402025

10 Ton LOG SPLITTER

OPERATION & MAINTENANCE INSTRUCTIONS

Thank you for purchasing this CLARKE 10 ton manually operated Log Splitter.

Before attempting to use the machine, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to the log buster giving you long and satisfactory service.

Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice.

-3-

When disposing of this product, do not dispose of with general waste. It must be disposed of according to the laws governing Waste Electrical and Electronic equipment, at a recognised disposal facility.

Specifications Model No: .................................................... Log Buster 4

Part No: ........................................................ 3402025

Ram Stroke ................................................... 205mm (8-1/16)

Weight: ......................................................... 46.6kg

Base Dimensions L x W x H: ........................ 1070 x 210 x 280 mm (without handles)

Oil Type ........................................................ Clarke Hydraulic Oil

LOG CAPACITY

Maximum Length: ....................................... 444mm

Maximum Diameter: ................................... 175mm

Clarke Guarantee This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

Safety Precautions

WARNING: As with all machinery, there are certain hazards involved with their operation

and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked or

ignored, personal injury to the operator or damage to property, may result.

1. ALWAYS Learn the machines applications, limitations and the specific potential hazards peculiar to it. Read and become familiar with the entire operating manual.

2. ALWAYS use a face or dust mask if operation is particularly dusty.

3. ALWAYS check for damage. Before using the machine, any damaged part, should be checked to ensure that it will operate properly, and perform its intended function. Check for alignment of moving parts, breakage of parts, mountings, and any other condition that may affect the machines operation. Any damage should be properly repaired or the part replaced. If in doubt, DO NOT use the machine. Consult your local dealer.

4. ALWAYS wear safety goggles, manufactured to the latest European Safety Standards. Everyday eyeglasses do not have impact resistant lenses, they are not safety glasses.

5. ALWAYS keep work area clean. Cluttered areas and benches invite accidents.

6. ALWAYS ensure that adequate lighting is available. A minimum intensity of 300 lux should be provided. Ensure that lighting is placed so that you will not be working in your own shadow.

7. ALWAYS keep children away. All visitors should be kept a safe distance from the work area, especially whilst operating the machine.

8. ALWAYS maintain machine in top condition. Keep tools/machines clean for the best and safest performance. Follow maintenance instructions.

9. ALWAYS concentrate on the job in hand, no matter how trivial it may seem. Be aware that accidents are caused by carelessness due to familiarity.

10. ALWAYS keep your proper footing and balance at all times - dont overreach. For best footing, always wear safety footwear (rubber soles & steel toecaps). Keep floor clear of oil, scrap wood, etc.

-4-

Additional Precautions for Log Splitters Extra special care is required when using this powerful tool to safeguard yourself and others around you.

Before using the log splitter, check for fluid leaks. Be sure the tool and the work area around it is clean and free of oil spills. Hydraulic fluid can create hazards, causing you to slip and fall, your hands to slip while using the machine, and it is also a potential fire hazard.

Hydraulic Systems: Never operate this tool if there is a potential hazard due to leaking hydraulic fluid.

Physical Hazards: The very nature of log splitting will produce splinters. When operating log splitters, always ensure approved safety gloves, shoes, and eye protection is worn.

-5-

444mm

175mm

NEVER tamper with the log splitter .

NEVER try to split logs larger than those indicated in Fig. 1. This could be dangerous and may damage the machine.

Do not allow split logs to accumulate, always clean up as you work, accumulated split logs and wood chips can create a hazardous work environment.

The operator must take all necessary precautions to minimise the risk of accidental damage or injury due to wood being ejected from the machine.

The surface must be perfectly level to prevent the machine from moving during operation, and the area must be free from any objects that could prevent complete freedom of movement for the operator whilst working.

The machine must always be used by ONE OPERATOR ONLY. Nobody must be allowed to use the log splitter unless they have read the instruction manual thoroughly and have been instructed in its use. The machine must be used by adults only. Check that the logs to be split are free from nails or wire, which may fly up or damage the machine.

Split wood in the direction of the grain. Do not attempt to split a piece of wood across the grain as this could seriously damage the machine.

If the log moves away from the blade, retract the ram and rotate the log through 90O

and try again

Keep your hands well away from any splits and cracks which open in the log; these may close suddenly and crush your fingers.

NEVER use the machine whilst under the influence of alcohol, drugs, medicines, or when you are tired. A clear mind is essential for safety.

Before starting work, check correct functioning of all the safety devices and check for soundness of welded joints, securing nuts & bolts.

Figure 1 shows the maximum log size that can be split. Please note that the diameter of the log is indicative: i.e. A small log can be difficult to split if it has knots or a particularly tough fibre. On the other hand, if the wood has regular fibres, it is not difficult to split logs with diameters greater than that shown. It is important NOT to persist if the log does not split fairly easily as the pump may be damaged. This could occur when the machine is made to work under maximum stress in an attempt to split excessively fibrous, knotty wood or wet, green wood.

Fig.1

Operation

-6-

Assembly

The Logbuster-4 is fully assembled except for the transportation wheels.

Position the wheels and washers (supplied) into position, insert the axle pin from the outside and secure with the split pin provided, in the manner shown in Fig.2

NOTE: The logsplitter may be lifted at the splitting wedge end, using the brace, shown in Fig.3, which will raise the pump end on to its wheels, allowing the unit to be transported to a suitable position.

If possible have a truck or similar available to stack the split logs into for easy transportation to a location where the logs are to be stacked.

Prepare the logs for splitting in a tidy pile as close as possible to the splitter, only stack those logs that are ready for splitting, i.e. correct length and diameter. DO NOT attempt to split green logs, dry, seasoned logs split more easily.

Turn the release lever - A, Fig.2 fully anti clockwise, to retract the ram and when it has retracted fully, turn it fully clockwise.

Position the log to be split so that it fits neatly on the log supports If the log tends to wobble, it must be repositioned by turning until it becomes stable.

With the log in place and ensuring all precautions referred to previously have been observed, pump the handles which will extend the ram and proceed to split the log.

When the log has split, turn the release lever - A, anticlockwise to retract the ram and free the log.

If the log has not split, turn it through 180 and try again. If the log has jammed on the splitting wedge, lever it off, standing well clear, DO NOT

use you hands to remove a jammed log, as this could be extremely hazardous.

Note: It can sometimes be difficult to split small logs, especially if the wood is particularly hard or knotty, larger logs with regular fibres are quick and easy to split. Any logs found difficult to split, are best discarded to prevent damage to the machine caused by oil seal failure etc.

Fig.2

Fig.3

Maintenance

Before Use

Always inspect the machine to ensure it is in good condition. Inspect the bed and welded joints for signs of cracking or distortion. Inspect the hydraulics for signs of leaks, any defects should be rectified before using the machine again.

Monthly

Bleed system and check oil level as follows.

1. Turn the release valve fully clockwise and pump the handles until the ram is fully extended.

2. Remove the oil filler plug - BFig.3.

3. Quickly turn the release valve anticlockwise to retract the ram and expel any air from the system.

4. Check the oil level which should be approx. 1/4 below the filler neck.

If necessary, top up with CLARKE hydraulic oil, available from your CLARKE dealer.

5. Finally, carefully replace the filler plug using a small implement to ensure the securing lip is prodded into place inside the filler hole.

After long periods of operation, the splitting wedge will become blunt and require sharpening. To do this, simply remove burrs and flat spots using a fine file.

-7-

WARNING:

NEVER ask for the assistance of another person when operating this machine, this instruction applies especially with jam clearing. Keep hands clear of jammed log and moving parts when attempting to free jammed logs.

Trouble Shooting

Problem Probable Cause Remedy

Log fails to split. Incorrect positioning of the log.

Reposition the log.

Log exceeds permitted dimensions or wood is too hard or knotty for the capacity of the machine.

Use logs of the correct specifications.

Wedge not cutting. Check the splitting wedge and sharpen if necessary.

Oil Leak Locate the leak and rectify, if necessary, contact your nearest CLARKE dealer.

Log pusher advances jerkily and/or vibrates badly.

Air in hydraulic system. Bleed system as described under Maintenance. Top up if necessary. If problem persists, consult your CLARKE dealer.

Oil leaks. Worn or damaged oil seals. Fit new oil seals, consult your nearest CLARKE dealer.

PARTS & SERVICE TEL: 020 8988 7400 or e-mail as follows:

PARTS: Parts@clarkeinternational.com SERVICE: Service@clarkeinternational.com

IMPORTANT: The use of parts other than CLARKE replacement parts may result in safety hazards, decreased tool performance and may invalidate your warranty.

-8-

Ram advances jerkily or with strong vibrations.

Parts Diagram

-9-

-10-

Parts List Item Description Qty Part No

1 Frame 1 N02C-10000-000 2 Handle Grip 2 E050-50002-000 3 Handle 2 N020-00006-000 4 Clevis Pin Wrap 1 N020-00004-000 5 Cotter Pin 3x25 3 9404-03025-000 6 Jacks Top Plate 1 N020-20000-000 7 Clevis Pin 1 N020-00003-000 8 U-Clamp 1 N020-00001-000 9 Jacks 1 N023-20000-000 10 Spring 2 N020-00002-000 11 Hex Bolt M10x25 2 9102-10025-000 12 Lock Washer 10 4 9306-10000-000 13 Flat Washer 10 2 9307-10000-000 14 Wheel Axle 2 N020-00007-000 15 Wheel 2 N020-00005-000 16 Big Flat Washer 10 2 9302-10000-000 17 Hex Nut M10 2 9202-10000-000

-11-

Declaration of Conformity

Manualsnet FAQs

If you want to find out how the 3402025 Clarke works, you can view and download the Clarke 3402025 10 Ton Log Buster 4 Instructions on the Manualsnet website.

Yes, we have the Operation and Maintenance Instructions for Clarke 3402025 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation and Maintenance Instructions should include all the details that are needed to use a Clarke 3402025. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 3402025 10 Ton Log Buster 4 Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 3402025 10 Ton Log Buster 4 Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 3402025 10 Ton Log Buster 4 Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 3402025 10 Ton Log Buster 4 Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 3402025 10 Ton Log Buster 4 Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.