Clarke 6600480 CS5350RP Shelf Unit Red Instructions PDF

1 of 2
1 of 2

Summary of Content for Clarke 6600480 CS5350RP Shelf Unit Red Instructions PDF

SHELF UNIT

Decide on the position you require the bottom shelf to be. Fit 1 short shelf support between the 2 leg angles. Repeat this again making sure that the same short shelf support is at the same height. Now fit the 2 long shelf supports matching the 2 short shelf supports. Always hammer gently, being sure the shelf support tabs are in line with the leg angle slots. If the tabs are out of line, simply bend them to line up either way to suit. Do not use force and damage the tabs. When hammering the shelf supports, always hammer the leg surface closest to the angle.

ASSEMBLY INSTRUCTIONS PARTS INVENTORY CHECKLIST

MDF Shelves ...................................... 5 Short shelf supports ......................... 10 Long Shelf Supports . ........................ 10 Angle Leg Sections ........................... 8 Angle leg Joiners .............................. 8 Plastic floor protectors ...................... 8 Nuts and Bolts .................................... 4

Please read these instructions before assembly.

TOOLS NEEDED FOR THE JOB A Hammer or a Maliet

SAFETY TIPS Please Handle Sharp Metal Edges Carefully

Model No: CS5150 Part Nos: 6600400 - 150kg Galvanised Part Nos: 6600450, 6600470, 6600472 - 150kg Painted

Model No: CS5350 Part Nos: 6600405 - 350kg Galvanised 6600455, 6600480, 6600482 - 350kg Painted

Fit another 2 short shelf supports at the desired height then fit the 2 long shelf supports to match the short shelf supports.

1

2

Clarke International, Hemnall Street, Epping, Essex CM16 4LG: Parts & Service - Tel: 020 8988 7400

IMPORTANT: IT IS STRONGLY RECOMMENDED THAT YOU WEAR A GOOD PAIR OF INDUSTRIAL GLOVES WHEN ASSEMBLING THIS UNIT, TO AVOID INJURY DUE TO THE POSSIBILITY OF THERE BEING SHARP EDGES AND CORNERS.

Secure the MDF shelves on to the shelf supports after full assembly.

3 4

Fit the floor protectors provided on the end of each leg.

Assembling as a standard bench Refer to Step I and Step 2, assemble as shown, bolting the two frames together with the nuts and bolts supplied, then place the 4 MDF shelves as in step 3.

5

Assembling as a corner bench The same assembly instructions apply as Step 7 except you bolt the bench together at right angles as illustrated.

6

7

MAY WE SUGGEST... Your Hammer fast Shelving should be fastened

to the wall where possible wfth the necessary fasteners (not included).

Always place heavier items on the lower shelves. Always evenly distribute your loads across the shelves where possible.

To extend the legs, use the leg joiners in the angle of each leg, as illustrated. However, if you require a shelf to be located at the joint, refer to step 5

For assembly as a 5 shelf unit, with a shelf at t

Manualsnet FAQs

If you want to find out how the 6600480 Clarke works, you can view and download the Clarke 6600480 CS5350RP Shelf Unit Red Instructions on the Manualsnet website.

Yes, we have the Assembly Instructions for Clarke 6600480 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Assembly Instructions should include all the details that are needed to use a Clarke 6600480. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 6600480 CS5350RP Shelf Unit Red Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 6600480 CS5350RP Shelf Unit Red Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 6600480 CS5350RP Shelf Unit Red Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 6600480 CS5350RP Shelf Unit Red Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 6600480 CS5350RP Shelf Unit Red Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.