Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions PDF

1 of 20
1 of 20

Summary of Content for Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions PDF

OPERATION & MAINTENANCE INSTRUCTIONS

DL0222 REV2

HAND HELD DRYWALL SANDER MODEL NO: DWS180

PART NO: 3400400

2 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION

Thank you for purchasing this CLARKE 180mm Hand Held Drywall Sander, which is designed for drywall and ceiling sanding use only.

Read all safety warnings, instructions, illustrations and specifications provided with this power tool. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service. Failure to follow all instructions listed may result in electric shock, fire and/or serious injury.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

3 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPECIFICATION

SAFETY SYMBOLS

Electrical Supply 230V 50Hz 1 ph

Power rating 710 Watt

Fuse rating 13 Amp

No Load Speed (variable) 1200 - 2500 rpm

Net Weight 2.45 kg

Disc Sanding Size 190 mm

Sanding Discs Aluminium Oxide (P80, P100, P120, P150, P180, P240)

Vibration Emissions 4.09 m/s2 / uncertainty value (k) =1.5 m/s2

LED Light 3.8 Watt

IP Rating IP20

Dust Extract Diameter 32mm(Internal), 38mm(External)

Sound Power 88 dB Lwa (Uncertainty Factor, K: 3 dB)

Read instruction manual before use

Wear dust mask

Class 2 Double Insulated

Wear ear defenders

WEEE Directive Wear safety glasses

4 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SAFETY PRECAUTIONS

1) WORK AREA SAFETY

a. Keep work area clean and well lit. Dark areas invite accidents.

b. Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2) ELECTRICAL SAFETY

a. Power tool plugs must match the power outlet. NEVER modify the plug in any way. DO NOT use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching power outlets will reduce risk of electric shock.

b. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.

c. DO NOT expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.

d. DO NOT abuse the cable. NEVER use the cable for carrying, pulling or unplugging the power tool. Keep cable away from heat, oil, sharp edges or moving parts. Damaged or entangled cables increase the risk of electric shock.

e. When operating a power tool outdoors, use an extension lead suitable for outdoor use. Use of a cable suitable for outdoor use reduces the risk of electric shock.

f. If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock.

3) PERSONAL SAFETY

a. Stay alert, watch what you are doing and use common sense when operating a power tool. DO NOT use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.

b. Use personal protective equipment. ALWAYS wear eye protection. Protective equipment such as dust mask, non-skid safety shoes, hard

WARNING: READ ALL INSTRUCTIONS. FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW MAY RESULT IN ELECTRIC SHOCK, FIRE AND/ OR SERIOUS INJURY. THE TERM POWER TOOL IN ALL WARNINGS LISTED BELOW REFERS TO YOUR HAND HELD DRYWALL SANDER.

5 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

hat, or hearing protection used for appropriate conditions will reduce personal injuries.

c. Prevent unintentional starting. Ensure the trigger is in the off-position before connecting to power source, picking up or carrying the tool. Carrying power tools with your finger on the trigger or energising power tools that have the switch on invites accidents.

d. Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.

e. DO NOT overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.

f. Dress properly. DO NOT wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts.

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards.

4) POWER TOOL USE AND CARE

a. DO NOT force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.

b. DO NOT use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool accidentally.

d. Store idle power tools out of the reach of children and DO NOT allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.

e. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.

f. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.

g. Use the power tool, and accessories in accordance with these instructions, taking into account the working conditions and the work to

6 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

be performed. Use of the power tool for operations different from those intended could result in a hazardous situation.

5) SERVICE

a. Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained.

6) DUST EXTRACTION a) The drywall sander is provided with a dust extraction facility. Please note however, that this does not preclude the user from wearing a face mask to prevent the inhalation of dust particles. All safety wear must be worn.

SAFETY INSTRUCTIONS FOR KICKBACK

1. Maintain a firm grip on the power tool and position your body and arm to allow you to resist kickback forces. Always use the auxiliary handle, if provided, for maximum control over kickback or torque reaction during start-up. The operator can control torque reactions or kickback forces, if proper precautions are taken.

2. NEVER place your hand near the sanding pad. It may kickback over your hand.

3. DO NOT position your body in the area where power tool will move if kickback occurs. Kickback will propel the tool in the direction opposite to the sanding pads movement at the point of snagging.

4. Use special care when working corners, sharp edges etc. Avoid bouncing and snagging the sanding pad. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory and cause loss of control or kickback.

WARNING: KICKBACK IS A SUDDEN REACTION TO A PINCHED OR SNAGGED ROTATING WHEEL, BACKING PAD, BRUSH OR ANY OTHER ACCESSORY. PINCHING OR SNAGGING CAUSES RAPID STALLING OF THE ROTATING ACCESSORY WHICH IN TURN CAUSES THE UNCONTROLLED POWER TOOL TO BE FORCED IN THE DIRECTION OPPOSITE OF THE ACCESSORY'S ROTATION AT THE POINT OF THE BINDING.

WARNING: KICKBACK IS THE RESULT OF POWER TOOL MISUSE AND/OR INCORRECT OPERATING PROCEDURES OR CONDITIONS AND CAN BE AVOIDED BY TAKING PROPER PRECAUTIONS AS GIVEN BELOW.

7 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. Connecting it to any other power source may cause damage.

If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed due to damage, a replacement should be fitted, following the wiring instructions shown below. The old plug must be disposed of as insertion into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with the markings on the terminals of your plug, proceed as follows.

The Blue coloured wire must be connected to the terminal which is marked N or coloured Black.

The Brown coloured wire must be connected to the terminal which is marked L or coloured Red.

We strongly recommend that this machine is connected to the mains supply via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

This symbol indicates that this is a Class II product, and does not require an earth connection.

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS THOROUGHLY BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

WARNING: THE WIRES IN THE POWER CABLE OF THIS PRODUCT ARE COLOURED IN ACCORDANCE WITH THE FOLLOWING CODE: BLUE = NEUTRAL BROWN = LIVE

Plug must be BS1363/A approved.

Always fit

Ensure that the outer sheath of

Neutral (Blue)

Live (Brown)

a 13 Amp

the cable is firmly held by the clamp

fuse

8 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PRODUCT OVERVIEW

NO DESCRIPTION NO DESCRIPTION

1 Sander 5 Auxiliary Handle

2 LED Light 6 2 x Carbon Brushes

3 2m Dust Extraction Hose 7 S5 Allen Key

4 Dust Bag 8 1 x P80 sanding disc 1 x P100 sanding disc 1 x P120 sanding disc 1 x P150 sanding disc 1 x P180 sanding disc 1 x P240 sanding disc

9 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PREPARATION AND USE

FITTING A SANDING PAD 1. Ensure the sander is switched off

and the plug is removed from the socket.

2. Remove the sanding disc.

3. Place the allen key in the hexagon hole in the centre of the sanding pad and rotate clockwise to remove disc

4. Place replacement sanding pad and tighten allen key anticlockwise.

FITTING THE SANDING DISC 1. Ensure the sander is switched off

and the plug is removed from the socket.

2. Select the sanding disc to be used.

This MUST be the correct 4 hole 190mm diameter disc with hook and loop backing.

3. Line up the holes in the disc with those on the sanding pad.

This is necessary for dust extraction purposes.

4. Press the disc firmly onto the pad to secure it using the hook & loop backing.

FITTING THE AUXILIARY HANDLE 1. Screw handle into the side of the

sander, as shown.

2. There are equivalent screw holes on both sides of the sander, depending on personal grip preferences.

10 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DUST COLLECTION 1. Ensure the sander is switched off.

2. Connect hose onto the dust extract port on the underside of the sander trigger handle.

3. Connect opposite end of hose onto dust collection bag.

NOTE: The dust bag must be emptied regularly:- do not wait until it is completely full.

The dust bag is emptied as follows.

1. Ensure the sander is switched off.

2. Gently squeeze the push & click connector to remove the dust bag from the hose.

3. Take the dust bag to the dustbin and slide the clip off the bag, empty the bag into the bin.

4. Reassemble the dust bag and clip and fit back on to the hose.

OPERATION 1. Plug into the mains socket and

switch on,

2. Set speed of sander, see page 11

3. Place the sanding disc on the workpiece.

Hold the sander firmly with both hands.

4. Squeeze the trigger.

Allow to get up to speed before working gently across the workpiece until smooth.

5. Release the trigger.

Wait until the motor has stopped fully before putting the sander down.

11 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

SPEED CONTROL SETTINGS To control the speed, turn the knob located on the trigger in the direction marked.

1 = 1200 rpm

2 = 1500 rpm

3 = 1800 rpm

4 = 2100 rpm

5 = 2500 rpm

LOCK ON FEATURE For continuous sanding:

1. Squeeze the trigger and then press the LOCK ON button.

The sander will continue to run even if the trigger is released.

2. To release the lock on feature, squeeze the trigger again.

SUCTION POWER ADJUSTMENT 1. Turn the suction power adjustment

wheel to suit, based on the sanders speed setting

The faster the sander speed, the more open the suction power adjustment wheel should be.

EDGE/CORNER SANDING If there is a need to sand edges or corners of walls.

1. Press down on the release clip

2. Pull edge sanding cover away from main sander body

This will give access to 1/4 of the sanding disc edge for rounding edges and corners.

12 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

LED LIGHT 1. Adjust light to appropriate angle

2. The light has an independent On/ Off button.

REPLACING CARBON BRUSHES Both carbon brushes need replacing once either have less than 6mm length of carbon remaining.

1. Ensure the sander is switched off and the plug is removed from the socket.

2. Unscrew the plastic caps (1&2) found towards the rear of the motor housing on both sides. Be careful as the caps are spring loaded.

3. Withdraw the brush with its spring.

4. If replacement is necessary, renew the brush and replace the cap.

5. Ensure the cap screws back freely

13 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

MAINTENANCE

MAINTENANCE ALWAYS inspect the sander before use and ensure it is in working

condition.

Ensure all air vents are clear. (Use vacuum cleaner to clean the machine where possible).

Check the power cable to ensure it is sound and free from cracks, bare wires etc. Avoid using solvents when cleaning plastic parts, (most plastics are susceptible to damage from the various types of commercial solvents).

14 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

TROUBLESHOOTING

PROBLEM CAUSE REMEDY

Sander is overheating.

The machine is blocked with dust.

Clean the ventilation holes. Wipe the exterior with a dry cloth.

Excessive Sparking.

Worn brushes. This problem is easily remedied but you should consult your CLARKE dealer for parts and advice.

Sander does not switch on.

Blown fuse in plug. Faulty power supply

Check power supply. If the fuse is sound or blows repeatedly, consult your CLARKE dealer.

Dust is not extracted.

The dust bag is full or the dust extractor flue is blocked.

Remove and empty the bag, also clear any blockage.

15 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

REPLACEMENT DISCS & ACCESSORIES

REPLACEMENT DISCS

ACCESSORIES

GRIT SIZE PART NUMBER GRIT SIZE PART NUMBER

P60 (Pack of 5) 6502146 P150 (Pack of 5) 6502149

P80 (Pack of 5) 6502147 P180 (Pack of 5) 6502150

P120 (Pack of 5) 6502148 P240 9Pack of 5) 6502151

6 1/2 Wall & Plaster Board Saw - CHT525

Multipurpose Aluminium Work Platform - AWP-2

Vac King Wet & Dry Vacuum Cleaner -

CVAC20PR2

170mm, 8 TPI Blade

Tapered blade & comfort grip handle

Part No. 1801525

Max Safe working Load: 150kg

Dimensions (LWH): 1100mm x 415mm x 490mm

Part No. 3500890

Powerful 1400W, 230V Motor

Dry Capacity 13L, Wet Capacity 10L

Part No. 6471127

16 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS DIAGRAM

17 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

PARTS LIST

When requesting spare parts, please quote the reference DWS180 followed by the number listed.

ID DESCRIPTION ID DESCRIPTION

01 Hook & Loop Disc 180 27 O15 x O8 x 0.5 Gasket

02 Small Half Circle Wearing Ring 28 608 Bearing Cover

03 Side Cover 29 Stator

04 Big Half Circle Wearing Ring 30 Tension Spring

05 ST4 x 10 with Cushion 31 Master Switch

06 M4 Spacer 32 Governor

07 ST3 x 10 with Sharp End and Cushion

33 BT4 x 14 Self Tapping Screw

08 Bonnet 34 Tension Disc

09 BT4 * 25 Self Tapping Screw 35 Brush Holder

10 Disc Cover 36 Carbon Brush

11 Suction Regulating Wheel 37 Carbon Brush Cover

12 Output Shaft 38 Left Motor Housing

13 Coil Spring 39 0.33Uf LED Circuit Board

14 O18 x O10 x 0.2 Gasket 40 Light On/Off Switch

15 O24.2 x O18 x 3 Oil Seal 41 Left LED Light Housing

16 Aluminium Front Cover 42 Right LED Light Housing

17 DU6000 Bearing 43 LED Light Lense

18 O26 Clamp Spring for Hole 44 Cable Assembly

19 3 x 3 x 8 Square Key 45 Cable Protective Sleeve

20 Big Gear Wheel 46 Right Motor Housing

21 O10 Steel Cable Baffle Ring 47 Dust Bag Carrying Strap

22 Conical Spring 48 Dust Bag

23 608-2Z Bearing 49 Dust Extraction Hose

24 608-2RS Bearing 50 Dust Extraction Hose Connector

25 O20 x O10 x 5 Oil Seal 51 Auxiliary Handle

26 Armature 52 S5 Hexagon Allen Key

18 Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

DECLARATION OF CONFORMITY - UKCA

Manualsnet FAQs

If you want to find out how the 3400400 Clarke works, you can view and download the Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions on the Manualsnet website.

Yes, we have the Operation and Maintenance Instructions for Clarke 3400400 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation and Maintenance Instructions should include all the details that are needed to use a Clarke 3400400. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 3400400 DWS180 Hand Held Drywall Sander Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.