Clarke 4560705 TR300 Two Way Radio Kit Guide PDF

Download download
Clarke 4560705 TR300 Two Way Radio Kit Guide PDF
Clarke Manual Clarke Radio Manual Clarke 4560705 Manual Clarke TR300 Two Way Radio Kit Manual Clarke Radio User Guide
Pages 12
Year 2010
Language(s)
English en
1 of 12
1 of 12

Summary of Content for Clarke 4560705 TR300 Two Way Radio Kit Guide PDF

Page 1

User Guide

LS0414

Two Way Radio Kit MODEL NO: TR300

Part No: 4560705

Page 2

2

INTRODUCTION Thank you for purchasing this CLARKE product.

Before attempting to use the product, it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the product giving you long and satisfactory service.

GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission.

This guarantee does not effect your statutory rights.

ENVIRONMENTAL RECYCLING POLICY Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

Page 3

3

PARTS IDENTIFICATION

Page 4

4

OPERATION

BATTERY INSTALLATION 1. Remove the belt clip by lifting the

tab slightly and sliding it up.

2. Pull the battery door lock tab up to release the battery cover.

3. Insert the 3 AA rechargeable batteries supplied, ensuring you follow the polarity diagram inside the compartment.

4. Replace the battery cover and belt clip.

Do not mix old and new batteries.

Do not mix alkaline or rechargeable batteries.

Do not put batteries on a fire or expose them to high heat.

CHARGING 1. Insert the mains charger to a mains power socket.

2. Insert one of the charging leads into the charge socket on top of the radio.

Charge for 10 hours before using the radios for the first time.

Do not charge for more than 24 hours.

TURNING THE UNIT ON

Press and hold the button. The unit will beep and the LCD display will show the current channel.

TURNING THE UNIT OFF Press and hold the button. The unit will beep and the LCD display will turn blank.

ADJUSTING THE SPEAKER VOLUME

Press the button to increase the speaker volume.

Press the button to decrease the speaker volume.

Page 5

5

USING TWO WAY RADIOS When the radio is switched on and not being used, it is always in receiving mode .

Press the PTT or Call button to override this and allow the radio to transmit.

The Call button transmits a tone to attract the attention of any radio on the same channel.

NOTE: In order for other people to receive your transmissions, they must also be on the same channel as you.

CALLING ANOTHER RADIO 1. Make sure both units are on.

2. Set the volume to an audible level.

3. Set both units to the same channel (see next section)

4. Press and release the Call button on the front of your radio.

The other unit will receive a call (page) tone. They can then respond to your call by pressing the PTT button and speaking into their radio.

RESPOND PROMPT TONE: When the PTT button is released, the receiving party will hear a tone indicating that you have finished transmitting.

USING THE EARPIECE/MICROPHONE ATTACHMENT Plug your earpiece/microphone into the MIC/SPK socket on the top of your radio.

The sound will be heard through the earpiece and not the speakers.

Your voice will be picked up through the microphone built in to the attachment.

The Remote PTT Button does the same thing as the PTT button on the radio.

Page 6

6

MENU

CHANGING CHANNELS 1. Press the MENU button once.

2. Press the or buttons to select a channel (1-8).

3. Press the PTT button to select the channel and return to normal mode.

SETTING THE CALL RING MELODY (CA) The unit has 5 call ring melodies to select from.

1. Press the MENU button twice.

2. Press the or button to select your call ring melody.

3. Press the PTT button to select the melody and return to normal mode.

SETTING THE BUTTON TONE (TO) 1. Press the MENU button three times.

2. Press the or button to select on or off.

3. Press the PTT button to confirm the setting and return to normal mode.

SETTING THE PTT TONE 1. Press the MENU button four times

2. Press the or button to select on or off

3. Press the PTT button to confirm the setting and return to normal mode.

Page 7

7

ADVANCED OPERATIONS

CHANNEL SCAN The channel scan feature is when the radio searches all the channels sequentially for a valid transmission. A valid transmission is a channel with any signal being transmitted.

TO ACTIVATE THE CHANNEL SCAN: 1. Press the and MENU buttons at the same time.

The channel number will run rapidly on the display. When a signal is detected, the channel scan pauses, keeping the active signal broadcasted.

2. Press the PTT button to communicate on that channel and cancel the channel scan feature.

To continue the channel scan press the button to search for the next active channel.

3. To stop the scanning operation, press the MENU button again.

CHANNEL LOCK This feature locks the channel so that the channel cannot be changed accidentally.

1. Press the and MENU buttons for 2 seconds until a beep sound is heard.

The lock symbol will appear on the display when the channel is locked.

AUTOMATIC SQUELCH This two way radio is equipped with an automatic squelch circuitry, This filters out weak transmissions and unwanted noise, usually caused by terrain conditions.

This feature can be turned off to allow you to receive weaker signals from radios at close to the maximum range. In doing so, you may pick up static signals too.

TO TURN THE AUTOMATIC SQUELCH FEATURE ON OR OFF PERMANENTLY 1. Press and hold the or buttons for 2 seconds.

TO TURN THE AUTOMATIC SQUELCH FEATURE OFF TEMPORARILY 1. Press the or buttons briefly.

2. Release the button to restore the automatic squelch.

Page 8

8

SPECIFICATIONS

Charger Voltage 230V @ 50Hz

Two Way Radio Voltage 4.5V

Number of Channels 8

Operating Range (Miles/Km) 2.5Miles / 4 Km

Battery Type 3 x 1000mAh Ni-MH (per radio)

Battery Size

Manualsnet FAQs

If you want to find out how the 4560705 Clarke works, you can view and download the Clarke 4560705 TR300 Two Way Radio Kit Guide on the Manualsnet website.

Yes, we have the User Guide for Clarke 4560705 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Clarke 4560705. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 4560705 TR300 Two Way Radio Kit Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 4560705 TR300 Two Way Radio Kit Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 4560705 TR300 Two Way Radio Kit Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 4560705 TR300 Two Way Radio Kit Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 4560705 TR300 Two Way Radio Kit Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.