Contents

Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions PDF

1 of 4
1 of 4

Summary of Content for Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions PDF

WARNING: Read these instructions before using the product

10PC ADAPTOR KIT FOR CSA20F HYDRAULIC PRESSES

PART NO: 7615062

USER INSTRUCTIONS

GC0913

P

INTRODUCTION

Thank you for purchasing this CLARKE Adaptor Kit.

Before attempting to use this product, it is essential that you read this manual thoroughly and carefully follow all instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the product giving you long and satisfactory service.

GUARANTEE

This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

SAFETY PRECAUTIONS

Before use, always ensure the workpiece is firmly secure and stable.

Do not allow any person who is inexperienced in the use of hydraulic presses, to use the press unless they are under direct supervision.

Do not allow anyone to work directly in front of the press when it is in use.

When using accessories such as arbor plates, be certain they are centered below the ram and are in full contact with the bed.

Parts being pressed may splinter, shatter, or be ejected from the press. Due to varied applications, it is your responsibility to always use adequate guards, wear eye protection and protective clothing when operating this press.

Keep hands and fingers away from parts that may pinch and shift.

Always apply the load under the centre of the ram. Offset loads can damage the ram or ram mount and may cause the workpiece to eject.

Failure to heed these warnings may result in damage to the equipment or failure resulting in damage to property or personal injury.

Do not exceed the rated capacity of the press.

2 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

CONTENTS The kit includes mandrels of 10mm,12mm, 16mm, 18mm, 20mm, 22mm, 25mm and 30mm. A mandrel adaptor, pressing plate and a mandrel storage bracket are also included.

MOUNTING THE BRACKET Bolt the mandrel storage bracket to the side of the press frame as shown.

FITTING THE MANDRELS Any of the mandrels provided may be connected to the end of the ram using the adaptor supplied.

Alternatively, the basic ram pressure cap supplied with the press can be fitted as shown. Secure the pressure cap by tightening the grub screw with a suitable hexagonal key.

If one of the mandrels is required, the adaptor must be fitted instead of the pressure cap. Secure the adaptor by tightening the grub screw with a hexagonal key.

Select your mandrel depending upon the size of the workpiece

Manualsnet FAQs

If you want to find out how the 7615062 Clarke works, you can view and download the Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions on the Manualsnet website.

Yes, we have the User Instructions for Clarke 7615062 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Instructions should include all the details that are needed to use a Clarke 7615062. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 7615062 10 Pieces Adaptor Kit For CSA20F Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.