Contents

Clarke 3400755 CHG2000B Hot Air Gun Instructions PDF

1 of 12
1 of 12

Summary of Content for Clarke 3400755 CHG2000B Hot Air Gun Instructions PDF

HOT AIR GUN MODEL NO: CHG2000B

PART NO: 3400755

USER INSTRUCTIONS

GC0514

P

INTRODUCTION

Thank you for purchasing this CLARKE Hot Air Gun.

Before attempting to use this product, please read this manual thoroughly and follow the instructions carefully. In doing so you will ensure the safety of yourself and that of others around you, and you can look forward to your purchase giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

GENERAL SAFETY RULES

GENERAL SAFETY IN THE WORKPLACE 1. ALWAYS ensure that air can circulate around the hot air gun and that the

air vents are unobstructed.

2. ALWAYS keep work area clean & tidy. Cluttered work areas and benches invite accidents.

3. NEVER over-reach. Keep proper footing and balance at all times.

4. NEVER store equipment in a wet/damp environment or expose to rain.

5. ALWAYS ensure the workplace is well lit. Ensure that lighting is placed so that you will not be working in your own shadow.

WARNING: WHEN USING ELECTRIC TOOLS, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND PERSONNAL INJURY INCLUDING THE FOLLOWING. READ ALL THESE INSTRUCTIONS BEFORE ATTEMPTING TO OPERATE THIS PRODUCT AND SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.

2 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

6. KEEP other persons away. Do not let persons, especially children, not involved in the work, touch the tool or extension cable and keep them away from the work area.

7. NEVER operate a power tool when under the influence of alcohol, drugs or medication.

8. Do not use power tools in the presence of flammable liquids or gasses.

9. Stay alert, watch what you are doing, use common sense and do not operate the power tool when you are tired.

CARE OF POWER TOOLS 1. Read this manual carefully. Learn the tools applications and limitations, as

well as the specific potential hazards peculiar to it.

2. ALWAYS keep guards in place and in working order. A guard or other part that is damaged should be properly repaired or replaced by an authorised service centre, unless otherwise indicated in this instruction manual.

3. Dont force the tool and use the correct attachment. It will do the job better and safer, at the rate for which it was intended.

4. ALWAYS disconnect the power tool from the power supply before carrying out any repairs or changing of accessories.

5. Before further use of the tool, it should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mountings or other condition that may affect its operation.

6. Have defective switches repaired by an authorised service centre. Do not use a power tool if the switch does not turn it on and off.

7. ALWAYS check for any damage or any condition that could affect the operation of the tool. Damaged parts should be properly repaired.

8. Have your tool repaired by a qualified person. This tool complies with the relevant safety rules. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

9. NEVER use this product for any other purpose than that described in this booklet.

10. Never abuse the power cable by yanking the cable to disconnect it from the socket. Keep the cable away from heat, oil or sharp edges.

11. Guard against electric shock. Avoid body contact with earthed or grounded surfaces.

12. If the tool should be used outdoors, use only extension cables intended for outdoor use and marked accordingly.

3 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

13. Avoid accidental starting by making sure the power switch is off before plugging in the power cable.

ADDITIONAL SAFETY RULES FOR HOT AIR GUNS

1. ALWAYS keep the mains cable well away from the hot air gun, particularly if laying it down temporarily during use.

2. ALWAYS switch the hot air gun OFF after use and allow it to cool before storing. Stand it with the nozzle pointing upwards.

3. Never leave the hot air gun unattended when it is switched on.

4. Always wear safety gloves and never touch the hot nozzle.

5. NEVER point the gun at any person or animal.

6. NEVER use in a flammable atmosphere, e.g. where solvent vapours are present.

7. Never use the hot air gun as a hair dryer.

8. Be aware that heat generated by the gun could cause nearby materials to ignite - particularly in confined spaces. Take all necessary precautions - have a fire extinguisher, or means to extinguish a fire to hand.

9. BE AWARE that fumes given off by paint etc., could be toxic. Take all necessary precautions - consult paint manufacturer etc where necessary.

10. DO NOT attempt any electrical repair yourself, consult a qualified electrician or the Clarke Service Department.

11. When finished take great care to place the gun where it cannot cause damage to property or other equipment, and cannot be accidentally touched by persons in the area. Stand upright while it cools.

12. Do not stand on a soft surface. The air gun could topple over or the air intakes become blocked.

CAUTION: WITH ALL MACHINES, THERE ARE CERTAIN HAZARDS INVOLVED WITH THEIR OPERATION AND USE. EXERCISING RESPECT AND CAUTION WILL CONSIDERABLY LESSEN THE RISK OF PERSONAL INJURY. HOWEVER, IF NORMAL SAFETY PRECAUTIONS ARE OVERLOOKED, OR IGNORED, PERSONAL INJURY TO THE OPERATOR, OR DAMAGE TO PROPERTY MAY RESULT.

4 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

ELECTRICAL CONNECTIONS

Before switching the product on, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate. This product is designed to operate on 230VAC 50Hz. Connecting it to any other power source may cause damage.

This product may be fitted with a non-rewireable plug. If it is necessary to change the fuse in the plug, the fuse cover must be refitted. If the fuse cover becomes lost or damaged, the plug must not be used until a suitable replacement is obtained.

If the plug has to be changed because it is not suitable for your socket, or due to damage, it should be cut off and a replacement fitted, following the wiring instructions shown below. The old plug must be disposed of safely, as insertion into a mains socket could cause an electrical hazard.

If the colours of the wires in the power cable of this product do not correspond with the markings on the terminals of your plug, proceed as follows.

The wire which is coloured Blue must be connected to the terminal which is marked N or coloured Black.

The wire which is coloured Brown must be connected to the terminal which is marked L or coloured Red.

We strongly recommend that this machine is connected to the mains supply via a Residual Current Device (RCD)

If in any doubt, consult a qualified electrician. DO NOT attempt any repairs yourself.

This symbol indicates that this is a Class II product, and does not require an earth connection.

WARNING! Read these electrical safety instructions thoroughly before connecting the product to the mains supply.

WARNING! The wires in the power cable of this product are coloured in accordance with the following code: Blue = Neutral Brown = Live

Plug must be BS1363/A approved.

Always fit a 5 Amp fuse.

Ensure that the outer sheath of the cable is firmly held by the clamp

Neutral (Blue)

Live (Brown)

5 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

PRODUCT OVERVIEW

INVENTORY CHECK Before starting work, please check contents against the list above and advise your dealer immediately if any parts are missing.

NO DESCRIPTION NO DESCRIPTION

1 Reflector Nozzle 5 Glass Protection Nozzle

2 Concentrator Nozzle 6 Defuser Nozzle

3 Triangular Shavehook (scraper) 7 Moulded Plastic Carry Case

4 Hot Air Gun 8 Handle for Triangular Shave Hook

1 32

65

4

87

6 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

OPERATION

Before starting work it is recommended that you heat a test piece to ensure you have the correct heat setting. In addition you should always take steps to protect sensitive or delicate areas where the effect of heat could cause damage (i.e. glass and plastics). Do not apply heat to the same place for a long time.

After the work has been completed, switch the gun OFF, disconnect from the mains supply and allow to cool in a safe place.

Take care not to drop the gun as this could seriously damage the heating element.

REMOVING PAINT AND DISSOLVING ADHESIVES 1. Fit the shavehook (scraper) nozzle to the front of the gun.

2. With the 0/1/2 switch in the 0 (OFF) position plug the hot air gun into the mains supply.

3. Set the switch to either position 1 or 2 according to how much heat is required. (see Specification on page 10).

Ensure the nozzle is pointing away from you.

4. Bring the nozzle of the hot air gun to the work piece approximately 3 cm from the surface.

The exact distance between the nozzle and the work piece will be dependent on the material being worked on.

Paint will rapidly become soft and blister, at which point it can be removed with the triangular shave hook. Do not allow paint to burn as this will make the removal process more difficult.

Most adhesives dissolve when heated and these can then be removed, taking care that any parts from which glue is removed are heat resistant.

Heating and paint removal are performed simultaneously, with the shave hook following the hot air gun.

5. Clean the shavehook blade quickly if paint/glue becomes stuck to it.

Profiled parts may be cleaned with a suitable wire brush once paint is softened.

Normally only one pass is required to remove both thick and thin layers of paint.

7 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

REMOVING PAINT FROM WINDOW FRAMES DO NOT point the gun directly at glass and always ensure it is adequately protected. A glass protection nozzle is provided for use when stripping window frames etc.

1. Fit the glass protection nozzle to the front of the hot air gun and angle it so that the gun can be placed up against the window, with the cowl of the nozzle, flat against the glass as shown.

2. It will be necessary to change the position of the protection nozzle as you work around the window pane. Ensure you wear adequate hand protection when doing so.

3. The protection nozzle must be kept in contact with the work at all times, but do not spend too much time in one area.

GENERAL USE To prevent the gun from overheating, maintain a minimum distance of 3 cm between the end of the nozzle and the work piece.

IMPORTANT: In continuous operation, never exceed the duty cycle for the unit as stated in the specification.

FORMING AND WELDING PLASTIC PARTS When bending or forming plastic parts, work slowly and with great care observing the effects of heat on such materials.

NOTE: With plastics, the temperature range between solid, pliable and liquid states is narrow, therefore great care should be taken.

WOOD STAINING Wood can be stained giving a rustic effect.

1. Fit the diffuser nozzle to the front of the hot air gun.

2. Do not hold the nozzle too close to the wood as this may cause the wood to colour unevenly.

3. Use a fine sandpaper to remove any singed wood fibres when finished.

HEAT SHRINK SLEEVE FITTING Fit the concentrating nozzle to the front of the hot air gun.

1. Select a suitable size heat shrink sleeve for the work piece.

8 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

2. Heat the sleeve evenly.

DE-FREEZING WATER PIPES Fit the reflector nozzle to the front of the hot air gun.

1. Always heat frozen areas inwards from the edge to the centre.

2. Take special care when defrosting plastic pipes.

3. Provide protection against heat damage to nearby paint and wall coverings where necessary.

4. Be aware that copper gas pipes can be difficult to distinguish from copper water pipes. Always check first.

5. Copper pipes are soldered together, therefore should not be heated above 200oC.

MAINTENANCE

This hot air gun is maintenance free, except always ensure that the air intake vents are kept clean. If used in a dusty environment clean the tool with low pressure compressed air.

ENVIRONMENTAL RECYCLING POLICY

Through purchase of this product, the customer is taking on the obligation to deal with the WEEE in accordance with the WEEE regulations in relation to the treatment, recycling & recovery and environmentally sound disposal of the WEEE.

In effect, this means that this product must not be disposed of with general household waste. It must be disposed of according to the laws governing Waste Electrical and Electronic Equipment (WEEE) at a recognised disposal facility.

9 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

SPARES & ACCESSORIES

SPECIFICATION

ITEM DESCRIPTION PART NUMBER

1 Air Nozzle Cover HT2000B01

2 Concentrator Nozzle HT2000B02

3 Diffuser Nozzle HT2000B03

4 Glass Protector Nozzle HT2000B04

5 Reflector for Nozzle HT2000B05

6 Triangular Shave Hook HT2000B06

7 Triangular Shave Hook Handle HT2000B07

Model Number CHG2000B

Dimensions (D x W x H) 244 x 74 x 255 mm

Product Weight 0.71 kg

Operating Voltage/Frequency 230 V - 50 Hz

Input Power 2000 W

Electrical Insulation Class II

Operating Temperature Min: -10oC, max 50oC

Duty Cycle 10 minutes on and 3 minutes off, as one cycle.

Temperature Settings: Setting 1: Setting 2:

350oC 550oC

Air Flow Settings: Setting 1: Setting 2:

300 litres/min 500 litres/min

10 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

P

DECLARATION OF CONFORMITY

11 arts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or

Manualsnet FAQs

If you want to find out how the 3400755 Clarke works, you can view and download the Clarke 3400755 CHG2000B Hot Air Gun Instructions on the Manualsnet website.

Yes, we have the User Instructions for Clarke 3400755 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Instructions should include all the details that are needed to use a Clarke 3400755. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 3400755 CHG2000B Hot Air Gun Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 3400755 CHG2000B Hot Air Gun Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 3400755 CHG2000B Hot Air Gun Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 3400755 CHG2000B Hot Air Gun Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 3400755 CHG2000B Hot Air Gun Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.