Clarke 7630203 COD70 Oil Drainer Instructions PDF

1 of 8
1 of 8

Summary of Content for Clarke 7630203 COD70 Oil Drainer Instructions PDF

ASSEMBLY & OPERATING INSTRUCTIONS

GC01011

OIL DRAINER Model No: COD70

PART NO: 7630203

2

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

INTRODUCTION Thank you for purchasing this CLARKE Oil Drainer which is designed to provide a means of draining vehicle oil quickly and cleanly and transporting it conveniently so that it may be transferred to a larger storage tank.

This CLARKE product has been designed to give long and trouble free service. If however, having followed the instructions in this booklet carefully, you encounter problems, take the unit to your local CLARKE dealer.

GUARANTEE This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt which will be required as proof of purchase.

This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

SPECIFICATION Capacity ................................................... 70 litres

Weight ....................................................... 35 kg

Working Temperature .............................. -10oC to 60oC

Dimensions (LxWxH) ................................. 580 x 470 x 1570 mm

GENERAL SAFETY PRECAUTIONS Ensure the oil drainer is in sound condition before use and has no cracks

which would result in oil leaks.

When disposing of oil, it must be disposed of according to local laws. Never ever pour any oil down drains.

Before draining oil, make sure that the engine is switched off.

Ensure that the oil drainer is standing on a level surface.

The oil being drained may still be hot - take care to avoid being burned.

If oil is spilt, the area must be cleaned completely and sand, sawdust or industrial absorbant material scattered on the area. You should also alert other people in the area to the danger of slipping.

Ensure that the grill is in place inside the oil collecting tank, as this helps to prevent splashing and avoid spillage when moving the oil drainer around.

3

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

ASSEMBLY Connect the handle to the storage tank and secure into place using the two small bolts supplied.

PARTS IDENTIFICATION 1. Oil collecting tank

2. Collecting tank tap 3. Extension pipe

4. Bleed valve

5. Compressor connection

6. Pressure gauge

7. Height adjustment lever

8. Safety valve

9. Storage tank

10. Oil level gauge

11. Discharge tap

12. Discharge tube

13. Discharge tap

4

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

METHOD OF USE

DRAINING OIL 1. Make sure that the storage tank is

not under pressure. If it is, open the tap on the compressor connection (5) to relieve the pressure.

2. Position the oil drainer beneath the vehicles oil drain plug.

3. Loosen the height adjustment lever (7) and raise the oil collecting tank (1) until it is approximately 30cm from the bottom of the vehicle.

4. Open the bleed valve (4) and collecting tank tap (2).

5. Remove the oil drain plug on the vehicle and allow the oil to drain into the oil collecting tank (1).

EMPTYING THE OIL FROM THE TANK

1. Replace the oil discharge plug and the bleed valve (4).

2. Fit the compressed air tube onto the compressor connection (5) and open the tap.

3. Pressurise the tank to approx 4 bar (see your compressor manual).

4. When the tank reaches 4 bar, close the tap on the compressor connection (5).

5. Turn off the compressor and remove the compressed air line from the compressor connection (5).

5

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

SMELBORP SESUAC SNOITULOS

dnecedtonseodlioehT gnitcelloclioehtmorfylkciuq

.)9(knategarotsehtot)1(knat

.metsysehtnikcolriA .)4(evlavdeelbehtnepO

fotuoemoctonseodlioehT .)9(knategarotseht

ehtnieudiserdilossierehT gnitcurtsboerahcihwknat

.epipnoitcartxeeht

nodetacol)B(patnepO otknatehtfomottobeht

.eudiserdilosehtegrahcsid

SERVICE AND REPAIR If there are any problems with the operation of your oil drainer please refer to the troubleshooting section below.

All servicing or repair must be carried out by qualified service technicians.

TROUBLESHOOTING

6. Place the oil discharge tube (12) into a used oil drum and open the discharge tap (11) to empty.

7. When all of the oil is discharged, vent any air left in the storage tank by opening the compressor connection (5).

8. Remove the discharge tube (12) from the oil drum and secure to the oil collecting tank (1).

MAINTENANCE 1. Make sure that the pressure gauge (a) is not

damaged.

2. Open tap (b) to clear any solid debris from the tank.

3. Replace tube (c) if it is no longer transparent.

6

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

COMPONENT PARTS

19 O-ring 147 AP00610042 20 Pipe holder AP50332041 21 Basin supporting tube AP60308001 22 Ball valve AP02001013 23 Oil collecting tank AP08200009 24 Grille AP08200007 25 Drain cock AP00508002 26 Seal ring AP00616010 27 Oil discharge connector AP51322077 28 Adjustable clamping lever AP00618005 29 Hex. Screw AP00704021 31 Washer AP00706034 32 Gauge cover AP00606003 33 Handle with tool tray AP60305001 34 Hexagon head screw AP00702038 35 Oil discharge unit AP53003001 36 Basin supporting unit AP64008002 37 Outlet (set) AP64008003

No: Description Part No: No: Description Part No:

1 Quick coupling AP00507002 2 Rigid spout AP50410006 3 Clamp AP00720003 4 Oil discharge hose AP00628007 5 Conical hose connector AP00510003 6 Nut-cap AP00704032 7 Serrated lock washers AP00708002 8 Fixed wheel AP00614006 9 Push-in elbow fitting AP00512004 10 Level indicator tube AP 50628011 11 O-ring 133 AP00610016 12 Drain plug AP00503034 13 Swivelling wheel AP00641012 14 Mini ba

Manualsnet FAQs

If you want to find out how the 7630203 Clarke works, you can view and download the Clarke 7630203 COD70 Oil Drainer Instructions on the Manualsnet website.

Yes, we have the Assembly and Operating Instructions for Clarke 7630203 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Assembly and Operating Instructions should include all the details that are needed to use a Clarke 7630203. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 7630203 COD70 Oil Drainer Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 7630203 COD70 Oil Drainer Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 7630203 COD70 Oil Drainer Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 7630203 COD70 Oil Drainer Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 7630203 COD70 Oil Drainer Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.