Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions PDF

1 of 4
1 of 4

Summary of Content for Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions PDF

ASSEMBLY INSTRUCTIONS GC07/12

Wall Storage Rack & Cabinet

Model: CWC80B Part No: 4800265

2

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

PRE-ASSEMBLY CHECK

Unpack the components and lay them out carefully. Referring to the parts list ensuring that all parts are present. If there are any deficiencies, immediately contact the dealer from where the product was purchased, or the Clarke International Parts Department on 020 8988 7400.

ASSEMBLY

NOTES: When assembling, all screw heads should be on the outside of the cabinet. DO NOT tighten any nuts until the cabinet is fully assembled.

Make a note of the position of the wall mounting holes in each back panel. These must be uppermost when the cabinet is assembled.

1. Take the back panels as shown in Fig 1, with the central side panel (with shelf brackets) positioned between them as shown.

NOTE: The central side panel includes brackets to support the shelves and must therefore face the end panel with the corresponding shelf brackets.

2. Line up the holes and connect with a screw & nut at each location.

3. Place the top panel on to the back panel assembly as shown in Fig 2, so that the edge with the return fold lies at the front and connect all parts loosely together.

4. Offer up the other side panel with shelf brackets to one end so that the shelf brackets match those at the centre of the unit. Line up the corner holes at A, and secure with a screw/nut.

5. Repeat at the front corners. Repeat the process with the other side panel.

FIG 1

Mounting Holes

3

Parts & Service: 020 8988 7400/E-mail:Parts@clarkeinternational.com or Service@clarkeinternational.com

6. Lay the assembly down, as shown in Fig 3 and offer up the bottom panel (the edge with the return fold uppermost).

7. Line up the holes in each corner at B and loosely insert a screw & nut.

8. Attach the door by inserting the pivot pins into the pivot holes in the top and bottom panels. Line up the holes at C, insert a screw and with the door open, fit a nut at each corner.

9. With the cabinet lying on a flat surface, as in Fig 3, rock it gently to ensure that no part is unduly stressed, before tightening all the screws/nuts progressively.

10. Attach the wall hanging brackets to the back panels using the screws and nuts provided.

Your wall cabinet is now ready to hang. Ensure it is firmly attached to the wall before loading with tools. Wall plugs and screws are provided for the purpose.

The shelves are rested on the supporting brackets, while the tool holders engage with the back panel, and may be positioned to your own choice.

FIG 2

FIG 3 Pivot Hole

Pivot Hole

GUARANTEE This CLARKE product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for its intended purpose.

Faulty goods should be returned to their place of purchase, no product can be returned to us without prior permission. This guarantee does not effect your statutory rights.

oN noitpircseD ytQ noitpircseD ytQ 1 lenaPmottoB/poT 2 gulPllaW 2

2 stekcarbflehshtiwlenaPediS 2 wercSgnitnuoM 2

3 lenaPediSnialP 1 01x5MwercS 81

4 lenaPkcaBdetarofreP 1 5MtuN 81

5 lenaPkcaBnialP 1 sredloHlooTelgniS 5

6 stekcarBgnignaHllaW 2 redloHhcnerW 1

7 rooDtnorF 1 redloHrevirdwercS 1

8 yekhtiwyssAkcoL

Manualsnet FAQs

If you want to find out how the 4800265 Clarke works, you can view and download the Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions on the Manualsnet website.

Yes, we have the Assembly Instructions for Clarke 4800265 as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Assembly Instructions should include all the details that are needed to use a Clarke 4800265. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke 4800265 CWC80B Wall Storage Rack Cabinet Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.