Clarke Pioneer 200 Air Compressor Instructions PDF

1 of 8
1 of 8

Summary of Content for Clarke Pioneer 200 Air Compressor Instructions PDF

0703

2

SPARES AND SERVICING

For Spare Parts and/or Servicing, please contact your nearest dealer, or CLARKE International as follows:

PARTS & SERVICE TEL: 020 8988 7400 PARTS & SERVICE FAX: 020 8558 3622

or e-mail as follows: PARTS: Parts@clarkeinternational.com

SERVICE: Service@clarkeinternational.com

15

PARTS DIAGRAM

COMPRESSOR ASSY.

3

Thank you for purchasing this Pioneer Air Compressor which is fitted with a 9.5 litre air receiver.

Before attempting to operate the machine, please read this leaflet thoroughly and carefully follow the instructions given. In doing so you will ensure the safety of yourself and that of others around you, and you can also look forward to the compressor giving you long and satisfactory service.

GUARANTEE

This product is guaranteed against faulty manufacture for a period of 12 months from the date of purchase. Please keep your receipt as proof of purchase. This guarantee is invalid if the product is found to have been abused or tampered with in any way, or not used for the purpose for which it was intended. Faulty goods should be returned to their place of purchase, no product can be returned without prior permission. This guarantee does not effect your statutory rights.

CONTENTS Page

Safety Precautions .......................................................................... 4

Electrical Connections ................................................................... 5

Assembly .......................................................................................... 6

Preparation for Use ......................................................................... 7

Operation ........................................................................................ 8

Shutting Down ................................................................................. 9

Maintenance ................................................................................ 10

Specifications ................................................................................ 11

Accessories .................................................................................... 11

Parts List and Diagrams ......................................................... 12 - 15

No. Description Qty Part No

51 Circlip 2 FN015018000

52 Wheel 2 FN020006000

53 Screw 4 FN014006022

54 O-Ring 1 FN010005000

55 Flange 1 FN113129042

56 Pipe 1 FN116022033

57 Rubber Foot 1 FN116022017

58 Receiver 1 FN164A01000

59 Non-Return Valve Assy. 1 FN349013000

60 Handle 1 FN116022015

61 Regulator and Filter Assy. 1 FN319003000

62 Valve w/Washer 1 FN019001001

63 Tap Assy 1 FN322007000

64 Pressure Gauge 1 FN330006000

66 Pressure Regulator Assy. 1 FN321002000

67 Pressure Relief Valve 1 FN347022000

68 Tee Piece 1 FN116022030

69 Pressure Gauge 1 FN330004000

70 Power Cable 1 FN164A04200

71 Pipe Assy. 1 FN199293000

72 Manifiold 1 FN199265000

73 Nut 2 FN014003001

74 Nipple 1 FN011117000

75 Drain Valve 1 FN022003000

76 Washer 1 FN047113003

77 Spring 1 FN047113002

78 Valve 1 FN047113001

79 Quick Release Coupling 1 FN116011065

80 Washer 2 FN014005002

81 Cable Grommet 2 FN029007000

SPARE PARTS

14

4

SAFETY PRECAUTIONS WARNING

As with all machinery, there are certain hazards involved with their operation and use. Exercising respect and caution will considerably lessen the risk of personal injury. However, if normal safety precautions are overlooked, or

ignored, personal injury to the operator, or damage to property may result. It is in your own interest to read and pay attention to the following rules:

1. COMPRESSED AIR IS DANGEROUS, NEVER direct a jet of air at people or animals, and NEVER discharge compressed air against the skin.

2. DO NOT operate your compressor with any guards removed. 3. Electrical or mechanical repairs should only be carried out by a qualified

engineer. If problems occur, contact your Clarke dealer. 4. Before carrying out any maintenance, ensure the pressure is expelled from

the air receiver, and the machine is disconnected from the mains supply. 5. DO NOT leave pressure in the receiver overnight, or when transporting. 6. DO NOT adjust, or tamper with the safety valves. The maximum pressure is

factory set, and clearly marked on the machine. 7. DO NOT operate in wet or damp conditions. Keep the machine dry at all times.

Similarly, a clean atmosphere will ensure efficient operation. Do not use in dusty or otherwise dirty locations.

8. Some of the metal parts can become quite hot during operation. Take care not to touch these until the machine has cooled down.

9. Always adjust the pressure regulator to the recommended setting for the particular spray gun or tool being used.

10. When spraying inflammable materials e.g. cellulose paint, ensure that there is adequate ventilation and keep clear of any possible source of ignition.

11. Protect yourself. Think carefully about any potential hazards which may be created by using the air compressor and use the appropriate protection. e.g. Goggles will protect your eyes from flying particles. Face masks will protect you against paint spray and/or fumes.

12. Before spraying any material always consult paint manufacturers instructions for safety and usage.

13. Do not exert any strain on electrical cables and ensure that air hoses are not tangled or wrapped around machinery etc.

14. When disconnecting air hoses or other equipment from your compressor ensure that the air supply is turned off at the machine outlet and expel all pressurised air from within the machine and other equipment attached to it.

15. Make sure that children and animals are kept well away from the compressor and any equipment attached to it.

16. Always ensure that all individuals using the compressor have read and fully understand the Operating Instructions supplied.

17. Ensure that any equipment or tool used in conjunction with your compressor, has a safety working pressure exceeding that of the machine.

13

PARTS DIAGRAM

RECEIVER ASSY

5

ELECTRICAL CONNECTIONS Connect the mains lead to a standard, 230 Volt (50Hz) electrical supply through an approved 13 amp BS 1363 plug, or a suitably fused isolator switch.

WARNING! THIS APPLIANCE MUST BE EARTHED

IMPORTANT: The wires in the mains lead are coloured in accordance with the following code:

Green & Yellow - Earth Blue - Neutral

Brown - Live

As the colours of the flexible lead of this appliance may not correspond with the coloured markings identifying terminals in your plug proceed as follows:

Connect GREEN & YELLOW cord to terminal marked with a letter E or Earth symbol or coloured GREEN or GREEN & YELLOW.

Connect BROWN cord to terminal marked with a letter L or coloured RED.

Connect BLUE cord to terminal marked with a letter N or coloured BLACK.

If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. non- rewireable) please note:

1. The plug must be thrown away if it is cut from the electric cable. There is a danger of electric shock if it is subsequently inserted into a socket outlet.

2. Never use the plug without the fuse cover fitted.

3. Should you wish to replace a detachable fuse carrier, ensure that the correct replacement is used (as indicated by marking or colour code).

4. Replacement fuse covers can be obtained from your local dealer or most electrical stockists.

FUSE RATING The fuse in the plug must be replaced with one of the same rating (13 amps) and this replacement must be approved to BS1362.

We recommend that this machine is connected to the mains supply via a Residual Current Device (RCD)

If in any doubt, DO NOT attempt any connections or repairs yourself. Consult a qualified electrician, your Clarke dealer, or CLARKE International Service Dept on

020 8988 7400 or e-mail: Service@clarkeinternational.com

Pioneer 110Volt model Connect the mains lead to a suitable 110V (50Hz) electrical supply through an approved plug or a suitably fused isolator switch.

If using a portable 110V transformer, make sure it has a rated capacity sufficient to take a 13 amp load.

12

SPARE PARTS

No. Description Qty Part No

1 Head Bolt 4 FN014002021 2 Washer 4 FN014005008 3 Manifold 1 FN111015000 4 Cylinder Head 1 FN116022002 5 Air Cleaner 1 FN317007000 6 Head Gasket upper 1 FN116022009 7 Valve assy 1 FN116022013 8 n/a 9 n/a 10 Head Gasket Lower 1 FN116022010 11 Cylinder Block 1 FN116022001 12 Bolt 2 FN014001044 13 Gasket 1 FN116022002 14 Piston Ring Set 1 FN216022002 14 Piston Ring Set 1 FN216022004 15 Piston 1 FN116022004 15 Piston 1 FN116022901 15 Piston 1 FN116022040 16 Gudgeon Pin 1 FN116022040 17 Circlip 2 FN015001000 18 Piston Assy 1 FN416022040 18 Piston Assy 1 FN416022901 19 Con-rod 1 FN416022005 20 Washer 1 FN014005006 21 Motor Housing 1 FN116022051 22 Bearing 1 FN033018000 23 Shaft 1 FN116022011 24 Bearing 1 FN033019000 26 Seal 1 FN010013000 27 Dipstick 1 FN012008000 28 End Housing 1 FN016032014 29 Screw 11 FN014006023 30 Bolt 2 FN116011038 31 Capacitor 1 FN009200014 32 Rotor 1 FN116022026 33 Stator 1 FN416022604 34 Bearing 1 FN033005000 35 End Casing 1 FN116011001 36 Nut 2 FN014003002 37 Fan 1 FN116032004 38 Fan Cover 1 FN116032003 39 Circlip 1 FN015015000 41 Motor Cover 1 FN116022014 - Full set of Gaskets 1 FN216032001

6

ASSEMBLY

1. Remove the plastic travel plug from the oil filling hole (fig.1) and insert the dipstick (fig.2)

2. Remove the plastic dust cap from the hole in the side of the head, (fig 3), and squirt a few drops of commonly available light oil (3 in 1 or similar), into the

cylinder head.

3. Screw on the air intake filter (fig.4)

Fig.2Fig. 1

Fig.4Fig.3

SPECIFICATIONS Pioneer100 Pioneer105 Pioneer200

Rotational Speed 2850 rpm 1400rpm 2800rpm

Max. Pressure 8 bar (116psi) 8 bar (116psi) 8 bar (116psi)

Air Displacement 100Ltrs/min 105Ltrs/min 190Ltrs/min

Electric Motor 0.65HP 0.75HP 1.25HP

Receiver 9.5 Ltr 9.5 Ltr 9.5 Ltr

Compressor Oil CLARKE SAE 40 CLARKE SAE 40 CLARKE SAE 40

Fuse Rating 13amps 13amps 13amps

Gross Weight 25.5kgs 26kgs 28kgs

Duty Cycle S1* S1* S1*

11

ACCESSORIES Your Clarke Pioneer Air Compressor can be used in conjunction with a range of optional accessories for inflating tyres, air brushing, stapling, blowing and many other uses. For details contact your local accessory stockist.

A complete kit - Model KIT 1000, illustrated below, is available from your Clarke dealer which is ideal for almost all applications.

Please quote part number 3110155

A similar kit is available, without the spray gun - Model KIT 300, Part No. 3110150 The accessories are also available separately Should you experience any difficulties obtaining accessories, please contact the Clarke sales department (telephone 01992 565300) for details of your nearest dealer.

Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without

prior notice. Always consult the machines data plate

* This machine may be used continuously

MAINTENANCE

Fig. 10

Fig. 9

Fig.11

3. After the first 50 hours use, replace the oil completely (use Clarke SAE 40 compressor oil) and then, after every 100 hours. To empty the oil from the machine, remove the nut on the front of the crankcase cover (fig.9).

4. Every 50 hours use, remove the black plastic air filter and clean it with compressed air, blowing in the opposite direction to the usual air passage (fig.10).

5) At least once a week drain the moisture out of the receiver by unscrewing the drain plug underneath the air receiver (fig11).

6) In the event of an air leak follow the procedure below:

Load compressor to maximum pressure Unplug the compressor With a brush and soapy water wet all screwed

connections Any leaks will show through the formation of air

bubbles

NEVER UNSCREW A CONNECTION WHILE THE RECEIVER TANK IS UNDER PRESSURE...ALWAYS MAKE CERTAIN THAT THE TANK HAS FIRST BEEN EMPTIED.

1. After the first 5 hours of running the compressor, check the cylinder head bolts and motor housing, screws and re-tighten if any have worked loose.

2. Check the oil level every time you start working and top-up if necessary (use Clarke SAE 40 compressor oil).

10 7

PREPARATION FOR USE

1. Check the oil level is at the correct level on the dipstick, as shown in Fig.5. Where necessary, top up with Clarke SAE40 Compressor Oil available from your Clarke

` dealer.

This is best done in a separate container. If manufacturers recommendations on thinning are not available, the following can be used as a general guide

Water based paints (emulsions) - 10-20% water

Oil based paints (gloss) - up to 10% white spirit thinners

Cellulose paints - up to 50% cellulose thinners

b) Pour the paint into the spraygun pot, full is maximum, and screw the pot firmly back onto the gun. The top of the rim of the pot forms an airtight seal with the lid gasket.

c) Having read the rest of these instructions, read the HELPFUL HINTS ON SPRAYING booklet supplied and find a piece of material with the same type of surface as the article you wish to spray, which you can then practice on.

Fig.5

Fig. 6

3. Connect the rubber hose, supplied, to the spraygun inlet using one of the quick fit couplings, also supplied (fig.6).

NOTE: These couplings are designed to provide an air tight seal when hand tight. (Hose connectors only).

2. For paint spraying, careful paint preparation is important. The following steps are a simple guide:

a) Thin the paint to the correct viscosity using suitable thinners and following the PAINT MANUFACTURES RECOMMENDATIONS for required thinning of paint.

7. The Pressure Switch should not require adjustment. This is an automatic device and has been pre-set at the factory to stop the motor when the pressure in the receiver reaches its maximum (115 psi), and to start it again when the pressure in the receiver falls to the minimum precept value. This operation is completely automatic and does not affect the spraying process in any way.

NOTE: If the machine pumps continuously without cutting-out then the compressor is too small for the application/tool being used, and damage to the machine may result.

8. Paint flow through the spraygun is adjustable by screwing in or out the knurled knob at the back of the spraygun. Screw in (clockwise) to crease and screw out (anti-clockwise) to increase the amount of paint flow.

9. The spray pattern obtained can be altered by screwing in or out the knurled screw on the side of the barrel on the spraygun.

SHUTTING DOWN THE COMPRESSOR

1. The Pressure Switch is furnished with an ON/OFF switch which, when moved to the OFF (0) position (Picture 7), not only cuts off the motor, but also opens the breather valve. Always use this switch to shutdown the compressor. NEVER USE THE MAINS SWITCH TO STOP THE MOTOR.

NOTE: Immediately after use, clean the spraygun carefully, using nylon or similar bush and suitable thinner. Also blow through the spraygun afterwards with compressed air to check that is clean.

9

OPERATION

Important read the HELPFUL HINTS ON SPRAYING booklet in conjunction with these instruction.

1. Check that the mains voltage corresponds with that shown on the data sticker on the crankcase cover of the machine.

8

2. Ensure that the switch on the Pressure Switch is in the OFF (O) position and then switch on at the mains supply.

3. To start the compressor turn the switch on the Pressure Switch to the ON (l) position.

NOTE: Should the motor fail to start immediately it is probable that the receiver tank is already full of air. Trigger spraygun to release air and the motor will start automatically when the tank pressure is reduced.

4. Before starting any work allow the compressor to run with the air outlet cock completely opened, to permit a good distribution of the lubricating oil.

5. Close the outlet cock, connect the air hose and spraygun to the compressor outlet using the second quick-fit connector supplied. Re-open the outlet cock.

6. Set the operating pressure by adjusting the pressure regulator. To do this pull the regulator knob upwards and adjust the pressure by turning the knob - clockwise to increase the pressure and anti- clockwise to reduce it. (fig.8)

NOTE: For normal spraying do not exceed 50 psi (unless following paint manufacturers instructions). If other attachments (not supplied) are used, for example a tyre inflating gauge, staple gun, paraffin gun etc, it may be necessary to

Manualsnet FAQs

If you want to find out how the Pioneer 200 Air Compressor Clarke works, you can view and download the Clarke Pioneer 200 Air Compressor Instructions on the Manualsnet website.

Yes, we have the Operation and Maintenance Instructions for Clarke Pioneer 200 Air Compressor as well as other Clarke manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation and Maintenance Instructions should include all the details that are needed to use a Clarke Pioneer 200 Air Compressor. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Clarke Pioneer 200 Air Compressor Instructions is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Clarke Pioneer 200 Air Compressor Instructions consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Clarke Pioneer 200 Air Compressor Instructions free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Clarke Pioneer 200 Air Compressor Instructions, simply download the document to your computer. Once downloaded, open the PDF file and print the Clarke Pioneer 200 Air Compressor Instructions as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.