Cello 2020FS User Guide PDF

1 of 42
1 of 42

Summary of Content for Cello 2020FS User Guide PDF

20 LED TV with DVD

Contents

Unpacking the TV / Accessorys

Installing / Removing the Base Stand

Front / Right Side View and Controls

Rear View and Sockets

OSD Menu

1

Installing Batteries in the Remote Control

. Picture Setting

2. Sound Setting

3. Channel Setting

4. Lock Setting

Maintenance

1

2

3

4

14-20

31noitarepO cisaB

14-15

16

17-21

22-23

24

26

28

29 29 28

34 34-35spiT dna stniH

36sedoM yalpsiD

37snoitacificepS 38sgninraW ytefaS

Remote Control

Making Video and Audio Connections

5-6

7

Remote Control Operation Range 7

8

Connecting an AV Device with an HDMI Cable 8

Connecting a Computer with a VGA Cable 9

Connecting an AV Device with a Component (YPbPr) cable 9 Connecting an AV Device with a SCART Cable 10 Connecting an AV Device with Composite Cable Connecting a Digital Audio Receiver

10 11

Connecting Headphones 11

Turning the TV on for the First Time 12-13

5. Time Setting

Connecting a USB Storage Device

Viewing Photos

Listening to Music

Watching Movies

Viewing Texts

6. Option Setting 25

DVD 30-33

20" HD LED TV.

Screw size (ST4x10 3PCS)

1

The parts

Installation Place the TV face down on a soft and flat surface (blanket, foam, cloth, etc.) to prevent any damage to the TV.

TV set

100 x 100

Screw size (ST4 x 10 3PCS)

1.Put the stand to the neck of the TV set as shown below.

(ST4x10 3 PCS)

2.Attach the stand with the supplied screws.

2

DTV, ATV, AV, YPBPR, VGA, HDMI, MEDIA,

3

POWER

AV Connect an external device to the composite VIDEO(Y) and AUDIO (L / R) out jacks found on most video equipment.

DVB-S2 To connect a Satellite signal.

4

Remote Control

5

Remote Control

6

DTV Satellite ATV AV YPBPR VGA HDMI MEDIA DVD

7

L R HDMI VGA TV AerialVIDEOPower

8

9

L R HDMI VGA MINI YPbPr

Common Interface

PC AUDIO

L R HDMIVIDEOPowerMINI YPbPr Common Interface

PC AUDIO Digital

Audio out

L R HDMI VGAVIDEOPower

10

11

Mini YPbPr Mini AV

5. If this is the first time you are turning on the TV and there are no programs in the TV memory, the Quick Start menu will appear on the screen. There are 4 setups as follow:

12

First Time Installation

OSD Lang uage

Country

English

UK

MENU Return OK OK

First Time Installation

Auto Standby 4H

MENU Return OK OK

First Time Installation

Tv Connection

Tune Type

DTV

DTV

MENU Return OK OK

First Time Installation

Please ensure the aerial cable is plugged into the TV. Now choose "OK", the TV will tune all available channels.

CancelOK

20

DTV, ATV, AV, SCART, YPBPR, HDMI1, HDMI2, HDMI3, PC, Media.

Mut e Mute

LOCK

Radio

/

13

Input Source

DTV

Cable

ATV

AV

YPbPr

PC

HDMI

USB

OK OK

DVD

Satellite

14

PICTURE

Picture Mode Standard

Contrast 50

Brightness 50

Saturation 50

Tint 50

Sharpness 50

Color Temperature Normal

Aspect Ratio Auto

Noise Reduction Middle

Enter OK Enter Select Exit Exit

Saturation Press the buttons to increase or decreases the saturation.

Auto

15

Menu

16

Sports Menu

SPDIF Mode

Auto Volume This feature automatically adjusts the audio level when the TV is turned on.This function is activated by selectingON.

Surround Sound Turn on/off the surround sound function by selecting On or Off.

SOUND

Sound Mode Standard

Treble 50

Bass 50

Balance 0

Auto Volume Off

Surround Sound Off

Enter OK Enter Select Exit Exit

SPDIF Mode Off

1. Press the Menu button and then press the buttons to select the

CHANNEL menu.

2. Press the OK buttons

and then p

and then press the to select the following channel options ress the OK button.

Allows you to set up a variety of channel options.

17

CHANNEL

Auto Tuning

DVB-T Manual Tuing

ATV Manual Tuing

Programme Edit

Signal Information

Enter OK Enter Select Exit Exit

CI Information

Software Update(USB)

Auto Tuning

1.Press the buttons to Auto Tuning then press the

OK button to confirm.

2.In the Auto Tuing menu there are 2 options for you to

selet from:Tune Type and Country.

3.Press the Menu button to return back to the main menu.

4.Press the Exit button to exit the menu.

18

DVB-T Mannual Tuning

1.Select DVB-T Mannual Tuning,press the OK button to confirm.

Storage To 1 Press the buttons to change the numbered location of

the found channel.

ATV Mannual Tuning

ATV Mannual Tuning

DTV

19

DTV

20

21

Programme Edit

Use up/down keys to select program edit.Press OK or

Right button to enter the menu.Use up/down buttons to

navigate through the menu.

Delete

Press the RED button to delete the highlighted channel,

a red circle will appear next to the cahnnel name.

Press the RED button again to confirm delete.

Press the MENU to return to the main menu.

Favorite

Press up/down to select the channel,press Green button

to set the channel as favorite, press Green button again to cancel it.

Press MENU to return to the main menu.

Skip

Press up/down to select the channel you wish to skip.

press the BLUE button,a logo will appear next to the channel name and the channel will be skipped when you

scroll through the channels.

Press the BLUE button again on the highlighted channel to disable the skip function.Press MENU to return

to the main menu.

Signal Information

Only available in DTV mode,Signal Information includes:channel/network/modulation/quality/strength.

CI Information

When insert CI Module,display CI Information.

Software Update(USB)

1.Download the software to the usb device,then insert the usb device to the unit.

2.Press the menu button to select the CHANNEL menu.

3.Press the left/right buttons to select Software Update(USB) and then press the OK button to update software.

4.When the updating is completed,the unit will be reset to standby mode.

22

Lock Setting

Lock

LOCK

Lock System Off

Set Password

Block Program

Parental Guidance Off

Key Lock Off

Hotel Mode

Enter OK Enter Select Exit Exit

Lock System Lock System

Set Password: If you had already changed the password,enter the current password.

Block Program: This feature is available only for digital TV and the tuned-in channel must support it.

Key Lock:Press the buttons to select the Key Lock option and then press to choose

between the options ON or OFF.After selecting ON,the front panel buttons TV/AV/

Menu/CH+/CH-/VOL+/VOL- of the device will be locked.

23

Lock Setting

Hotel Mode

Press the up/down buttons to select the Hotel Mode

option and then press right button to choose between

the options ON or OFF.

Source Lock

Press the up/down buttons to select the Source Lock

option and then press OK to enable the menu.

Press the right button to toggle between ON and OFF.All

signal sources labelled ON will not be available any more in the signal source selection menu.

Default Source

Press up/down buttons to select the Default Source option and then press right button to choose a signal

source or OFF.This function lets you set the signal source(DTV/Cable/ATV/AV/SCART/YPbPr/PC/HDMI1/

HDMI2/HDMI3/USB) to be used when powering on the unit.It will be used until you select a different signal

source or disable this function(OFF).

DTV Channel Type

Default Prog

Press left/right buttons to select Last or 7488.

Max Volume

Press up/down buttons to select the Max Volume option and then press right button to set the desired volume.

Then the output volume will never exceed the set maximumvalue.

Default Volume

Press up/down buttons to select the Default Volume option and then press right button to set the default volume.

Clear Lock

Press up/down buttons to select the Clear Lock option and then press right button to anable it.Allhotel settings

will remain disabled until you enable the Hotel Lock again.

HOTEL

Hotel Mode On

Source Lock

Default Source ATV

DTV Channel Type DTV

Default Prog Last

Max Volume 100

Enter OK Enter Select Exit Exit

Default Volume 25

Clear Lock

24

Time Setting

TIME

Clock 01/Jan 01:08

Off Time Off

On Time Off

Sleep Timer Off

Auto Standby 4H

Time Zone London GMT

Enter OK Enter Select Exit Exit

OSD Timer 15 S

Time

Clock

Press the OK button to set date and time.

Off Time

Press the OK button to set off time.

On Time

Press the OK button to set on time.

Sleep Timer

The sleep timer automatically switches the TV to standby after the preset time has elapsed.The clock

will be set automatically when receiving a digital signal.Time must be set before using Sleep Timer function.

Press up/down buttons to select a period of time after which the TV automatically switches to standby mode:

OFF/10/20/.../180/240 min and then press the OK button to confirm.The timer begains to count down from

the number of minutes selected.

Auto Standby

The unit will automatically switch to standby mode 4 hours after the last time the remote control was used.

A reminder screen will pop up and count down before the unit switches to standby mode.If you want to operate

the TV for a long period of time,tun off the auto standby function by selecting Never.

Time Zone

When you select a Time Zone city,the TV time is set by the time offset information based on Time Zone and

GMT which is received with the broadcast signal and the time is set automatically by a digital signal.

Press the up/down/left/right buttons to select the desired time zone city and then press the OK button to

confirm.(DTV mode)

OSD Timer

Press up/down buttons to select the display time of the on-screen menu:5s/10s/15s/20s/25s/30s/Nevel and

then press the OK button to confirm.

25

OPTION

OSD Language English

Audio Languages English

Subtitle Language English

Hearing Impaired Off

PVR File System

Reset

Enter OK Enter Select Exit Exit

First Time Installation

Option Setting

Option

Home Mode Home

Blue Screen Off

OSD Language

Allows you to select the on screen display menu language.

Audio Languages

Select the audio languages.The availability of this function depends on the tuned-in channel.(can only be

selected in DTV mode)

Subtitle Language

Select the subtitle language.The availability of this function depends on the tuned-in channel.(can only be

selected in DTV mode)

Hearing Impaired

Allows you to show more information in subtitles for the hearing-impaired in some programmes(can only be

selected in DTV mode)

PVR File System

Reset

Restores all settings to the factory defaults.

First Time Installation

This option allows you to reset the TV to the default factory setting.Once activated the TV will go to standby mode.

Home Mode

Allow you to select among:Max Performance mode Home mode and Max Economy mode.

Blue Screen

Press left/right buttons to select ON or OFF

Allows you to test the speed of the USB device or Format the USB device

26

Mini YPbPr Mini AV

27

Multimedia Operation

Basic Operation

1.Press the SOURCE button on tje remote control to display the input source menu,select the USB source with

the up/down buttons and press the OK button to enter the Multimedia menu below.

Input Source

DTV

Cable

ATV

AV

YPbPr

PC

HDMI

USB

OK OK

2.Press left/right buttons to select the files on the USB device(PHOTO,MUSIC,MOVIE,TEXT)to view or play.

Return to main menu

Preview

File Information

Press the up/down/left/right buttons to select and the OK button to activate the file or open folder.Press button

to play the files in full screen mode.When in full screen mode press the OK button to show the navigation option

menu on the bottom of the screen or press stop button to return to files.

DVD

Satellite

28

1.Photo Photo viewing

Press left/right buttons to select the option on the

menu,and press the OK button to activate.

Repeat: Select the repeat mode from Repeat All,

Repeat1,Repeat None.

Music: Play/Pause the background music of your

choice.

Playlist: Display the playlist on the screen and

select the photo of your choice.

Info: Display the information of the file.

Rotate: Rotate the photo clockwise/counterclockwise.

Zoom In/Out: Zoom In/Out of your photos.

Move view: Move the photo in Zoom out mode.

2.Music Listen to music

Press left/right buttons to select the option on the

menu,and press the OK button to activate.

Play: Play the music.

FB: Retreat quickly.

FF: Fast forward.

Prev./Next: Go to a song/Turn to the next song.

Stop: Stop playing.

Repeat: Select the repeat mode from Repeat All,

Repeat1,Repeat None.

Play List: Display the playlist on the screen.

Info.: Display the information of the music file.

Play: Play the photo.

Prev./Next: Go to on a picture/Go to the next picture.

Stop: Stop auto turning pages.

29

3.Movie Watch a film

Press left/right buttons to select the option on the

menu,and press the OK button to activate.

Play: Play the movie.

FB: Retreat quickly.

FF: Fast forward.

Prev./Next: Go to a video/Turn to the next video.

Stop: Stop playing.

Repeat: Select the repeat mode from Repeat All,

Repeat1,Repeat None.

Aspect Ratio: Select the aspect ratio of the on screen display.

Move View: Moves the enlarged picture area.

4.Text

View text files

Press left/right buttons to select the option on the

menu,and press the OK button to activate.

Prev/Next page: Turn to previous/next page of the text.

Prev./Next: Turn to previous/next file.

Stop: Stop auto turning pages.

Music: Play/pause the background music of your choice.

Playlist: Display the playlist on the screen.

Info: Display the information of the text file.

30

31

32

33

34

35

36

20

463 x 65 x 280 mm

463 x 160 x 309 mm

3.2 kg

24

16

1366 768

12V 3A

600 : 1

180cd/m2

37

38

39

Manualsnet FAQs

If you want to find out how the 2020FS Cello works, you can view and download the Cello 2020FS User Guide on the Manualsnet website.

Yes, we have the User Guide for Cello 2020FS as well as other Cello manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User Guide should include all the details that are needed to use a Cello 2020FS. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Cello 2020FS User Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Cello 2020FS User Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Cello 2020FS User Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Cello 2020FS User Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Cello 2020FS User Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.