Casio HS70W Stopwatch Operation Guide PDF

1 of 1
1 of 1

Summary of Content for Casio HS70W Stopwatch Operation Guide PDF

ENGLISH

Stopwatch Mode Recall ModeTimekeeping Mode

Press . Press .

Year

Month Day

Second

Minute

Seconds

Time Display Stopwatch Display

Minutes

Hour Hours

Day of the week

PM

Lap counter Split time

Lap time

1/1000th of a second

Total elapsed time

A sticker is affixed to the glass of this stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch.

Depending on its model, the configuration of your stopwatch may differ somewhat from that shown in the illustration.

OPERATING PRECAUTIONS A battery is installed at the factory. Have it replaced by a CASIO distributor at the first sign of low power (dim

display). Do not use or store this stopwatch in areas exposed to temperature extremes, strong magnetism, strong

vibration, or strong impact. Heat can shorten battery life and cause malfunction. Keep the stopwatch away from heaters and direct sunlight

when using it. Never try to take the stopwatch apart. Doing so can cause malfunction. To clean the stopwatch, use a soft, dry cloth or a cloth moistened in a solution of water and a mild neutral

detergent. Wring out all excess moisture from the cloth. Never use thinner, benzene, alcohol or other similar agents.

Be sure to keep all user documentation handy for future reference.

CASIO COMPUTER CO., LTD. assumes no responsibility for any loss, or any claims by third parties that may arise through the use of this stopwatch.

GENERAL GUIDE C button .... Starts and stops timing. B button .... Toggles between the current time and stopwatch screens. A button ..... Performs lap/split and reset operation (stopwatch beeps). R button ..... Recalls lap/split time records and total elapsed time.

SPLIT TIME AND LAP TIME

Split time (SPLIT) is the time elapsed from the start to a specific point.

Lap time (LAP) is the time elapsed from one point to another or for one lap around a track.

START

1ST SPLIT 2ND SPLIT

3RD SPLIT

START

1ST LAP 2ND LAP

3RD LAP

USING THE STOPWATCH The stopwatch beeps to signal C and A button operations.

Working range The total elapsed time and split time display is limited to 9 hours 59 minutes 59.999 seconds. Lap time display is limited to 59 minutes 59.999 seconds. Thereafter it will be reset and started again. The lap counter starts from 1 to 99 and repeats from 0. While the stopwatch is reset to all zeros, holding down the A button will toggle the lower display area between display of lap time and split time. 100 (indicating the number of laps) will flash on the display when memory is full (100 lap times in the current

group).

NORMAL TIME

START STOP RESET

CHART

BUTTON OPERATION

DISPLAY

0 a

(a)

NET TIME

0 a b

(a) (a) (a + b) START STOP START STOP RESET

CHART

BUTTON OPERATION

DISPLAY

(Stoppage time)

After stopping a net time operation by pressing C, you can resume it by pressing C again.

LAP/SPLIT TIMES

0 a (a) b (a + b) c (a + b + c) (t)

START STOP RESET

CHART

BUTTON OPERATION

DISPLAY

1ST LAP 2ND LAP 3RD LAP

1ST SPLIT (a)

2ND SPLIT (a+b)

3RD SPLIT (a+b+c)

MULTIPLE FINISHING TIMES Example : To record the times of 100 different runners.

CHART

BUTTON OPERATION

DISPLAY

Difference between current finisher and previous finisher

Finishing position

START 1ST RUNNER FINISHES

2ND RUNNER FINISHES

99TH RUNNER FINISHES

100TH RUNNER FINISHES

RESET

USING THE RECALL MODE You can use the recall mode to view data in stopwatch memory. There is enough memory to store a total of up to 200 records, divided between two record groups of 100 each. If

you record 100 times, the 100th time will not be stored in memory until you reset the stopwatch to all zeros. Starting a new stopwatch elapsed time operation will cause the older of the two record groups to be deleted

automatically in order to make room for a new group of records. There is also a FAST LAP record that displays the fastest lap from among all of the lap times currently in memory. Record 1 (the newest record) will always be displayed first whenever you press the R button to switch from the

Stopwatch Mode to the Recall Mode. In the Recall Mode, each press of the B button will toggle the display between record group 1 and record group 2. Lap time records in memory can be recalled while an elapsed time operation is in progress or stopped. Memory records are cleared whenever a new Stopwatch Mode elapsed time operation is stared by pressing the C button after pressing the A button to reset the stopwatch to all zeros.

Holding down the or button scrolls at high speed.

SETTING THE CURRENT TIME AND DATE

MUTE 1. In the Timekeeping Mode, hold down R for about two seconds. 2. Press C on a time signal to correct the seconds. 3. Flashing setting can be changed. Press B to move the flashing.

SECONDS HOUR MINUTES YEAR

MONTHDAY

4. Use C (+) and A () to change the flashing setting. Holding down the C or A button scrolls at high speed.

5. Press R to exit the setting mode. * Year digits can be set up to the year 2099.

12/24-hour Timekeeping In the Timekeeping Mode, press C to toggle between 12-hour and 24-hour timekeeping.

Beeper On/Off In the Timekeeping Mode, hold down the A button for about two seconds to toggle the beeper on or off.

Auto Return The stopwatch returns to the Timekeeping Mode if left unused for a few minutes.

CARE OF YOUR STOPWATCH This stopwatch is water resistant up to five bars (atmospheres), which means you can use it in the rain or in

areas where splashing water is present. Never, however, operate the buttons of the stopwatch while it is immersed in water.

You should have the rubber seal that keeps out water and dust replaced every 2 to 3 years. Should moisture appear inside the stopwatch, have it checked immediately by your dealer or a CASIO distributor.

SPECIFICATIONS

Accuracy at a normal temperature (TIME): 30 seconds per month (STOPWATCH): 99.9988%

Display capacity: Time Display: Hour, minutes, seconds, am/pm, year, month, day and day of the week

Calendar system: Pre-programmed until the year 2099 Stopwatch Display:

Measuring capacity: (Total elapsed time display) 9 hours 59 minutes 59.999 seconds (Lap time display) 59 minutes 59.999 seconds (Split time display) 9 hours 59 minutes 59.999 seconds

Measuring unit: 1/1000 second Measuring modes: Net time, lap time, split time, 1st-100th place time, lap counter (up to 99) Memory capacity: 2 sets of 100 records each

Battery: One lithium battery (type: CR2032) Approx. 5 years continuous operation on type CR2032 (includes an average of 30 presses of button per day.)

Operating Temperature: 0C to 40C (32F to 104F)

Manufacturer: CASIO COMPUTER CO., LTD. 6-2, Hon-machi 1-chome, Shibuya-ku, Tokyo 151-8543, Japan

Responsible within the European Union: CASIO EUROPE GmbH Bornbarch 10, 22848 Norderstedt, Germany

Cette marque ne sapplique quaux pays de lUE. Diese Markierung trifft nur auf EU-Lnder zu.

Este smbolo es vlido slo en pases de la UE.

Esta marca aplica-se somente aos pases Unio Europia.

This mark applies in EU countries only.

Questo marchio vale soltanto nei paesi dellUE.

DEUTSCH

Stoppuhrmodus AbrufmodusUhrzeitmodus

Drcken sie . Drcken sie .

Jahr

Monat Tag

Sekunde

Minute

Sekunden

Uhrzeitanzeige Stoppuhranzeige

Minuten

Stunde Stunden

Wochentag

PM

Rundenzhler Zwischenzeit

Rundenzeit

1/1000 Sekunde

Gemessene Gesamtzeit

Am Glas dieser Stoppuhr ist beim Kauf ein Aufkleber angebracht. Ziehen Sie diesen vor der Benutzung der Stoppuhr bitte ab.

Je nach Modell kann die Auslegung der Stoppuhr etwas von den gezeigten Illustrationen abweichen.

VORSICHTSMASSREGELN ZUR BENUTZUNG Vor der Auslieferung wird im Werk eine Batterie eingesetzt. Lassen Sie diese von einem CASIO-Vertrieb

austauschen, wenn erste Anzeichen fr eine schwache Ladung auftreten (blasses Display). Benutzen oder verwahren Sie die Stoppuhr nicht an Orten, an denen Sie extremen Temperaturen, starken

Magnetfeldern, starken Vibrationen oder heftigen Sten ausgesetzt ist. Hitze kann die Batterielebensdauer verkrzen und Strungen verursachen. Setzen Sie die Stoppuhr bei der

Benutzung nicht der Hitze von Heizgerten oder direkter Sonnenbestrahlung aus. Versuchen Sie auf keinen Fall, die Stoppuhr zu zerlegen. Dies knnte einen Defekt zur Folge haben. Verwenden Sie zum Reinigen der Stoppuhr ein weiches, trockenes Tuch oder ein Tuch, das Sie mit einer Lsung

aus Wasser und einem neutralen Waschmittel befeuchtet haben. Wringen Sie das Tuch zuvor grndlich aus. Verwenden Sie auf keinen Fall Verdnner, Benzol, Alkohol oder hnliche chemische Mittel.

Bitte bewahren Sie die gesamte Benutzerdokumentation fr spteres Nachschlagen auf.

CASIO COMPUTER CO., LTD. bernimmt keine Gewhr fr irgendwelche Verluste oder etwaige Ansprche Dritter, die sich aus der Benutzung der Stoppuhr ergeben knnten.

ALLGEMEINE ANLEITUNG Knopf C ..... Startet und stoppt die Zeitmessung. Knopf B ..... Schaltet zwischen der aktuellen Uhrzeit und den Stoppuhr-Anzeigen um. Knopf A ..... Fr die Runden-/Zwischenzeit-Bedienung und zum Rckstellen (Stoppuhr piept). Knopf R ..... Zum Abrufen von Runden-/Zwischenzeitdaten und der gemessenen Gesamtzeit.

ZWISCHENZEIT UND RUNDENZEIT

Eine Zwischenzeit (SPLIT) ist eine vom Start bis zu einem bestimmten Punkt gemessene Zeit.

Eine Rundenzeit (LAP) ist eine von einem Punkt zu einem anderen oder fr eine Runde auf dem Platz gemessene Zeit.

START

1. Zwischenzeit 2. Zwischenzeit

3. Zwischenzeit

START

1. Rundenzeit 2. Rundenzeit

3. Rundenzeit

BENUTZEN DER STOPPUHR Die Stoppuhr quittiert die Bettigung der Knpfe C und A mit einem Kontrollton.

Kapazitt Die Anzeige der gemessenen Gesamtzeit und der Zwischenzeiten ist auf 9 Stunden, 59 Minuten und 59,999 Sekunden begrenzt. Die Anzeige von Rundenzeiten ist auf 59 Minuten und 59,999 Sekunden begrenzt. Wird diese Grenze berschritten, stellt sich die Zeit zurck und startet neu. Der Rundenzhler startet von 1 bis 99 und die Zahl der Durchgnge von 0. Wenn die Stoppuhr auf null zurckgestellt ist, kann das untere Displayfeld durch Gedrckthalten von Knopf A zwischen Rundenzeit- und Zwischenzeit-Anzeige umgeschaltet werden. Im Display blinkt 100 (zeigt die Rundenzahl an), sobald der Speicher voll ist (100 Rundenzeiten in der aktuellen

Gruppe).

NORMALE ZEIT

START STOPP RCKSTELLEN

VORGANG

BEDIENUNG

DISPLAY

0 a

(a)

NETTOZEIT

0 a b

(a) (a) (a + b) START STOPP START STOPP RCKSTELLEN

VORGANG

BEDIENUNG

DISPLAY

(Unterbrechung)

Nach dem Stoppen eines Nettozeit-Vorgangs mit C kann dieser durch erneutes Drcken von C wieder fortgesetzt werden.

RUNDEN-/ZWISCHENZEITEN

0 a (a) b (a + b) c (a + b + c) (t)

START STOPP RCKSTELLEN

VORGANG

BEDIENUNG

DISPLAY

1. Runde 2. Runde 3. Runde

1. Zwischenzeit (a) 2. Zwischenzeit (a + b)

3. Zwischenzeit (a + b + c)

MEHRERE ENDZEITEN Beispiel: Speichern der Zeiten von 100 verschiedenen Lufern

VORGANG

BEDIENUNG

DISPLAY

Differenz zwischen aktuellem und vorherigem Lufer

Platz

START 1. Lufer im Ziel

2. Lufer im Ziel

99. Lufer im Ziel

100. Lufer im Ziel

RCKSETZEN

BENUTZEN DES ABRUFMODUS Im Abrufmodus knnen Sie die Daten aus dem Stoppuhrspeicher einsehen. Der Speicher kann bis zu insgesamt 200 Eintrge in zwei Datengruppen mit jeweils 100 Eintrgen abspeichern.

Wenn Sie 100 Zeiten speichern, wird die 100. Zeit erst gespeichert, wenn Sie die Stoppuhr auf null zurckstellen. Durch Starten einer neuen Stoppuhr-Zeitmessung wird die ltere der beiden Datengruppen automatisch

gelscht, um Platz fr eine neue Gruppe von Eintrgen zu machen. ber den Bestzeit-Eintrag (FAST LAP) kann die schnellste der aktuell im Speicher enthaltenen Rundenzeiten

angezeigt werden. Eintrag 1 (der jngste Eintrag) wird stets zuerst angezeigt, wenn Sie mit Knopf R vom Stoppuhrmodus auf den

Abrufmodus schalten. Im Abrufmodus kann das Display mit B zwischen Datengruppe 1 und Datengruppe 2 umgeschaltet werden. Die gespeicherten Rundenzeiten knnen bei laufender oder gestoppter Zeitmessung angezeigt werden. Wenn nach vorheriger Rckstellung der Stoppuhr mit A auf null durch Drcken von Knopf C ein neuer

Messvorgang gestartet wird, werden die Speichereintrge stets gelscht.

Fr Schnelldurchgang halten Sie bzw. bitte gedrckt.

EINSTELLEN DER AKTUELLEN UHRZEIT UND DES DATUMS

Stumm 1. Halten Sie im Uhrzeitmodus etwa zwei Sekunden lang R gedrckt. 2. Drcken Sie C zum Korrigieren der Sekunden anhand eines Zeitsignals. 3. Die jeweils blinkende Einstellung kann gendert werden. Drcken Sie B

zum Weiterschalten des Blinkens.

Sekunden Stunde Minuten Jahr

MonatTag

4. Stellen Sie die blinkende Einstellung mit C (+) und A () passend ein. Wenn Sie C bzw. A gedrckt halten, erfolgt Schnelldurchgang.

5. Drcken Sie R zum Schlieen des Einstellmodus. * Die Jahresstellen knnen auf ein Jahr bis 2099 eingestellt werden.

12/24-Stunden-Uhrzeitformat Drcken Sie im Uhrzeitmodus C zum Umschalten des Uhrzeitformats zwischen 12 Stunden und 24 Stunden.

Pieper ein/aus Halten Sie im Uhrzeitmodus zum Ein- und Ausschalten des Piepers circa zwei Sekunden lang den Knopf A gedrckt.

Automatische Rckkehr Die Stoppuhr kehrt automatisch in den Uhrzeitmodus zurck, wenn sie einige Minuten lang nicht mehr benutzt wird.

PFLEGE DER STOPPUHR Die Stoppuhr ist bis zu einem Druck von fnf bar (Atmosphren) wasserdicht, wodurch sie auch bei Regen und

an Orten mit spritzendem Wasser benutzt werden kann. Bettigen Sie auf keinen Fall einen der Knpfe, falls die Stoppuhr in Wasser liegen sollte.

Sie sollten die Gummidichtung, mit der die Uhr gegen Wasser und Staub geschtzt ist, alle 2 bis 3 Jahre auswechseln lassen.

Wenn sich innen in der Stoppuhr Feuchtigkeit abgeschlagen hat, lassen Sie sie bitte unbedingt von Ihrem Hndler oder CASIO-Vertrieb berprfen.

TECHNISCHE DATEN

Ganggenauigkeit bei Normaltemperatur (UHRZEIT): 30 Sekunden/Monat (STOPPUHR): 99,9988 %

Anzeigekapazitt: Uhrzeit-Anzeige: Stunde, Minuten, Sekunden, am/pm (1./2. Tageshlfte), Jahr, Monat, Tag und Wochentag

Kalendersystem: Vorprogrammiert bis zum Jahr 2099 Stoppuhr-Anzeige:

Messkapazitt: (Gesamtzeit-Anzeige) 9 Std. 59 Min. 59,999 Sek. (Rundenzeit-Anzeige) 59 Min. 59,999 Sek. (Zwischenzeit-Anzeige) 9 Std. 59 Min. 59,999 Sek.

Messeinheit: 1/1000 Sekunde Messmodi: Nettozeit, Rundenzeit, Zwischenzeit, Zeiten fr 1. bis 100. Platz, Rundenzhler (bis 99) Speicherkapazitt: 2 Stze mit je 100 Eintrgen

Batterie: 1 Stck. Lithiumbatterie (Typ: CR2032) Ca. 5 Jahre Dauerbetrieb auf Typ CR2032 (bei durchschnittlich 30 Knopfdrcken pro Tag) </

Manualsnet FAQs

If you want to find out how the HS70W Casio works, you can view and download the Casio HS70W Stopwatch Operation Guide on the Manualsnet website.

Yes, we have the Operation Guide for Casio HS70W as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation Guide should include all the details that are needed to use a Casio HS70W. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio HS70W Stopwatch Operation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio HS70W Stopwatch Operation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio HS70W Stopwatch Operation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio HS70W Stopwatch Operation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio HS70W Stopwatch Operation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.