Contents

Casio HS60W Stopwatch Operation Guide PDF

1 of 2
1 of 2

Summary of Content for Casio HS60W Stopwatch Operation Guide PDF

Operation Guide HS-60W

1

MA0410-EA

ILLUSTRATION Each press of the B button toggles the display between the TIME and STOPWATCH screens.

Year

Month Day

Seconds

Seconds

Minutes

TIME SCREEN STOPWATCH SCREEN

MinutesHour

Hour

Day of the week

PM

Lap counter

Press .

Split time

Lap time

1/1000th of a second

Total elapsed time

Hold down for a few seconds to toggle between 12/24-hour formats.

A sticker is affixed to the glass of the stopwatch when you purchase it. Be sure to remove the sticker before using the stopwatch.

Depending on its model number, the configuration of your stopwatch may differ somewhat from that shown in the illustration.

GENERAL GUIDE

STOPWATCH MODE A button ..... Starts and stops timing. B button ..... Toggles between the current time and stopwatch screens. C button .... Registers a lap/split time. R button ..... Recalls lap/split time records and the total elapsed time. L button ..... Press to illuminate the display for about three seconds.

SPLIT TIME AND LAP TIME

Split time (SPLIT) is the time elapsed from the start to a specific point.

Lap time (LAP) is the time elapsed from one point to another or for one lap around a track.

START

1ST SPLIT 2ND SPLIT

3RD SPLIT

START

1ST LAP 2ND LAP

3RD LAP

USING THE STOPWATCH 1 The stopwatch beeps whenever the A or C button is pressed.

Time Display Ranges Total elapsed time and the split time can be displayed up to 9 hours, 59 minutes, 59.999 seconds. Lap time is displayed up to 59 minutes, 59.999 seconds. Timing restarts from zero after any of the limits described above is reached. The range of the lap counter is from 01 to 99. The lap count restarts from 00 after reaching 99.

NORMAL ELAPSED TIME

0

START STOP RESET

BUTTON OPERATION

DISPLAY

MEASURE- MENT

NET ELAPSED TIME

0 a b

(a) (a) (a + b)

START STOP START STOP RESET

BUTTON OPERATION

DISPLAY

(Lost time) MEASURE- MENT

After stopping a net elapsed time operation by pressing A, you can resume it by pressing A again.

Operation Guide HS-60W

2

USING THE STOPWATCH 2 LAP/SPLIT TIMES Lap and split times are automatically stored in memory. There is enough memory to hold up to 99 lap/split time records (01 to 99), plus the total elapsed time. The displayed lap number will flash when memory is full. Pressing C while memory is full will display the current lap/split times along with the flashing lap number, without storing them in memory. Records can be recalled by pressing the R button.

0 a (a) b (b) c (c)

START 1ST LAP 2ND LAP 3RD LAP

1ST SPLIT (a)

2ND SPLIT (a+b)

3RD SPLIT (a+b+c)

STOP RESET

BUTTON OPERATION

DISPLAY

MEASURE- MENT

Recording the Finishing Times of Multiple Runners After pressing A to start timing, press C as each runner crosses the finish line. This records each of the finishing times in memory, which you can recall by pressing the R button.

*Recorded times are retained in memory until you start a new net elapsed time operation (by pressing A) after clearing the stopwatch screen to all zeros (by pressing C).

Example : To record the times of 10 different runners.

START 1ST RUNNER FINISHES

2ND RUNNER FINISHES

9TH RUNNER FINISHES

10TH RUNNER FINISHES

BUTTON OPERATION

DISPLAY

Difference between this runners time and the previous runners time

You can scroll through records in memory by pressing , even while the stopwatch is still running.

Press .

Runners finishing position

Runners time

MEASURE- MENT

SETTING TIME AND DATE 1)While the TIME screen is displayed, hold down C for a few seconds to

display the setting screen. 2)Press A to reset seconds count to 00. 3)Press C to move flashing between settings.

SECONDS HOUR MINUTES YEAR

MONTHDAYDAY OF THE WEEK

4)Press A to change (+) selected setting. Hold down A to change at high speed.

5)To exit the setting screen, press B at any time or C while the day of the week setting is flashing.

*Year setting is possible up to 2099.

Auto Return The setting screen automatically returns to the TIME screen if you do not perform any operation for a few minutes.

CARE OF YOUR STOPWATCH This stopwatch is water resistant up to five bars (atmospheres), which means you can use it in the rain or in

areas where splashing water is present. Never operate the buttons of the stopwatch while it is immersed in water. You should have the rubber seal that keeps out water and dust rep

Manualsnet FAQs

If you want to find out how the HS60W Casio works, you can view and download the Casio HS60W Stopwatch Operation Guide on the Manualsnet website.

Yes, we have the Operation Guide for Casio HS60W as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Operation Guide should include all the details that are needed to use a Casio HS60W. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio HS60W Stopwatch Operation Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio HS60W Stopwatch Operation Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio HS60W Stopwatch Operation Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio HS60W Stopwatch Operation Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio HS60W Stopwatch Operation Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.