Parts List
Stand Assembly / Mounting the Keyboard onto the Stand
Congratulations on your selection of the CASIO Product.
l Before using the instrument, be sure to carefully read through the instructions contained in this leaflet.
l Be sure to keep all user documentation handy for future reference.
Symbols Various symbols are used in this leaflet and on the product itself to ensure that the product is used safely and correctly, and to prevent injury to the user and other persons as well as damage to property. Those symbols along with their meanings are shown below.
*WARNING This indication stipulates matters that have the risk of causing death or serious injury if the product is operated incorrectly while ignoring this indication.
*CAUTION This indication stipulates matters that have the risk of causing injury as well as matters for which there is the likelihood of occurrence of physical damage only if the product is operated incorrectly while ignoring this indication.
*WARNING
Do not allow the bag to be placed over the head or ingested.
Never place the plastic bag this stand comes in over your head or in your mouth. Doing so creates the risk of suffocation. Particular care concerning this precaution is required where small children are present.
Avoid locating the instrument or stand on an unstable surface.
Do not locate the instrument or stand on an unsteady platform, on an uneven surface, or in any other unstable location. Doing so can cause the stand to fall over, creating the risk of personal injury.
About the stand
l When using the stand, make sure the two longer lengths of horizontal piping are on the floor (shorter lengths under the instrument). Never try to use the stand while it is upside down.
l Do not drop the stand or otherwise subject it to strong impact.
CASIO KEYBOARD STAND CS-2X
Users Guide MA1007-A Printed in China
ES
Allen wrench 1Fastening tape 8 4 pieces per set. Use when
changingthestandheight,etc.
Cushioning sponges 3
Bolt 1
Washer 1 Nut 1
1. With the longer lengths of horizontal piping towards the floor, pull the short pipes apart to expand the stand.
Fix the stand in its open position. As shown at in Figure 1, pass the bolt through the washer and then through the hole in the stand. Affix the nut and then tighten with the Allen wrench that comes with the stand. Tighten the bolt to the point that there is no
space between the washer and bolt. You can adjust the stand to either of two
heights.
2. Affix the fastening tape to the bottom of the instrument as shown in Figure 2. Position four pieces of tape so they align with
the tape on the stand, as shown in Figure 1 (a).
3. P lace the inst rument onto the stand (Figure 3). Adjust the position of the instrument so the
pieces of fastening tape engage with each other.
* If the stand is unstable, affix the cushioning sponges to the pipes of the legs (Figure 4). Peel the tape from the backs of the sponges
and then install them. Be sure to remove the instrument from the
stand before affixing the sponges.
Figure 1
Figure 2
Figure 3 Figure 4
(a)
(a)
(a)
(a)
CS2X-ES-1A
Safety Precautions
*WARNING
Do not climb up onto the instrument or stand.
Doing so can cause the stand to tip over, creating the risk of personal injury. Particular care concerning this precaution is required where small children are present.
*CAUTION
About the stand
l This stand is intended for use with a CASIO Digital Keyboard only.
Improper use o f th is s tand can cause the instrument to fall or the stand to tip over, creating the risk of personal injury.
Be sure to observe the following points. Use this stand only with the CASIO Digital
Keyboard model for which it is intended. Do not try to use this stand for any other purpose
or application. Be sure to remove the instrument from the stand
before trying to move the stand. Be sure to remove the instrument from the stand
before trying to adjust the height of the stand. The bolt of the stand can work loose due to the
effects of temperature and humidity changes, vibration, and other factors. Because of this, you need to periodically check the bolt for proper tightness.
l Be sure to fol low the assembly instruct ions precisely when assembling the stand and mounting the instrument on it. Failure to adequately tighten the bolt or improper positioning of the instrument can cause the stand to tip over and the instrument to fall, creating the risk of personal injury.
l When placing the instrument onto the stand, take care that you do not pinch your fingers.
l Never remove the bolt while the instrument is mounted on the stand. Doing so can cause the keyboard to fall and creates the risk of your hands becoming pinched by the stand legs.
Do not place heavy objects on the keyboard.
Do not place heavy objects on the keyboard. This may cause the keyboard to tip over o
en
hi
sp
pt
cs
de
fi
fr
hu
it
nn
ru
sv
dk
nl
pl