Contents

Casio Exilim Connect 3.0 Software User's Guide PDF

1 of 36
1 of 36

Summary of Content for Casio Exilim Connect 3.0 Software User's Guide PDF

EXILIM Connect 3.0 App for a Smartphone or Tablet Terminal

EN

Users Guide

This manual uses a typical CASIO camera and smartphone for explanations. Certain details (display contents, etc.) may differ on the device you are actually using.

Keep the Users Guide in a safe place for future reference.

2

The contents of this manual are subject to change without notice. The contents of this manual have been checked at each step of the production

process. Feel free to contact us if you notice anything that is questionable, erroneous, etc.

Any copying of the contents of this Users Guide, either in part or its entirety, is forbidden. Except for your own personal use, any other use of the contents of this manual without the permission of CASIO COMPUTER CO., LTD. is forbidden under copyright laws.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits suffered by you or any third party due to the use of this application software.

CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost profits caused by loss of memory contents due to malfunction, repair, or any other reason.

Note that the example screens and product illustrations shown in this Users Guide may differ somewhat from the screens and configuration of the actual product.

Read this first!

3

Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 What you can do with EXILIM Connect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Getting Ready to Establish a Connection between a Smartphone and Your Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Installing the EXILIM Connect App on Your Smartphone . . . . . . . . . . . . . . . . . . . 6 EXILIM Connect Top Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Establishing a Wireless Connection for the First Time . . . . . . . . . . . . . . . . . . . . . 8

Having the Camera Send Images to the Smartphone as They are Recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send) . . 11 Viewing Snapshots and Movies in Camera Memory on a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (View on Phone) . . 13 Viewing Camera Images on the Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Displaying a Single Camera Image. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Copying Camera Images to a Smartphone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 Deleting Camera Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17 Protecting a Camera Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Using the Scene App . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Share Album) . . 18 Using a Smartphone as a Camera Remote Controller . (Remote Capture) . . 18 Bluetooth wireless technology connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 Cannot Connect with Bluetooth Wireless Technology . . . . . . . . . . . . . . . . . . . . 20 Controlling Your Camera with a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Sending the Image Displayed on the Camera Monitor Screen to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Quick Send) . . 23 To assign the Quick Send function to the front shutter button . . . . . . . . . . . . . . 23 To send the image on the camera monitor screen to a smartphone. . . . . . . . . . 24

Sending a Snapshot or Movie File from Camera Memory to a Smartphone . . . . . . . . . . . . . . . . . . . . . . . . . . (Send Selected Image) . . 26 Bluetooth wireless technology connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Cannot Connect with Bluetooth Wireless Technology . . . . . . . . . . . . . . . . . . . . 28

Adding Location Information to Snapshots sent to the Smartphone . . . . . . . . 29 Sharing Snapshots with an Unpaired Smartphone . . . . (One Time Share) . . 30 Configuring Camera Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Changing the Camera Password

for Wireless LAN Connection . . . . . . . . . . . . . . . . . . . . . (WLAN password) . . . 31 Using the Smartphone to Change the Cameras Date

and Time Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Adjust) . . . 31 Setting Up to Receive Images from the Camera

as They are Recorded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Send). . . 32 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 Copyrights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Contents

4

Installing EXILIM Connect on your smartphone and then establishing a connection with your camera enables the functions described below. For details about how to install EXILIM Connect, see the user documentation that comes with your digital camera.

What you can do with EXILIM Connect

With this function: You can do this: See page:

Auto Send

Images can be automatically sent as they are shot to a smartphone that has been Bluetooth paired with the camera.

11

View on Phone

View snapshots stored in camera memory on a smartphone, and copy snapshots and movies to a smartphone for viewing.

13

Share Album in Scene app

Camera images received by the smartphone are automatically stored in the Scene apps album.

18

Remote Capture

Remotely control and shoot with the camera using a smartphone.

18

5

IMPORTANT!

Inside an aircraft or anywhere else where use of wireless communication is restricted or prohibited, put the camera into the airplane mode.

Some smartphone models may not be able to play back movie files from your camera.

Depending on your smartphone model, its operating system version, and/or its remaining storage capacity can cause failure of a movie or snapshot save operation. Receiving a camera file, perform the required operation on your smartphone to check if the file was stored properly.

A movie received on an Android terminal: Movies are not displayed by Gallery app. Movies are stored in a folder named

EXILIM Connect. A separate movie player is required to playback movies (whose files have the file

name extension MOV). Depending on your movie player, you may not be able to playback movies and/

or audio. Images recorded with another companys camera cannot be received by a

smartphone using this app. Attempting to use a memory card that includes a wireless function with your

camera can cause abnormal operation.

NOTE Note that using wireless functions requires more battery power usage than normal.

Make sure that the camera battery is sufficiently charged before starting a wireless operation.

The connectable range between the camera and a smartphone depends on the local communication environment and on the type of smartphone you are using.

Quick Send With some cameras that have a front shutter button, you can simply press the button to send a snapshot displayed in the PLAY mode to a smartphone. After sending a snapshot to a smartphone, you can then upload it to a social networking service.

23

Send to phone You can select one or more snapshot and/or movie file in camera memory and send it to a smartphone. After sending an image to a smartphone, you can then upload it to a social networking service.

26

With this function: You can do this: See page:

6

Installing the EXILIM Connect app on a smartphone makes it possible to get images shot by the camera with your smartphone and to use your smartphone as a remote controller for your camera. Search for the EXILIM Connect app on Google Play or App Store and install it on your smartphone.

. App operation guarantees No guarantees are made concerning the ability to operate the EXILIM Connect app on any particular smartphone or tablet.

IMPORTANT!

For information about CASIO cameras that support the EXILIM Connect app, visit the Official CASIO Digital Camera Website (http://www.exilim.com/), Google Play, or the App Store.

For information about operating system version supported by the app, check the information on Google Play or the App Store.

App functions and the required operating environment are subject to change without notice.

. Android terminal

1. Open Play Store (Google Play).

2. In the search field, type EXILIM Connect.

3. Install EXILIM Connect.

. iPhone (iOS)

1. Open App Store.

2. In the search field, type EXILIM Connect.

3. Install EXILIM Connect.

Getting Ready to Establish a Connection between a Smartphone and Your Camera

Installing the EXILIM Connect App on Your Smartphone

7

Starting up EXILIM Connect will display the top screen shown below.

Tap to view images stored in camera memory and copy them to the smartphone. Depending on the connected camera, you may also be able to delete and protect images stored in camera memory (page 13).

Tap to pair with a camera (page 8). Tap to operate the camera from the smartphone (page 18).

Tap to configure settings to enable storage of images received from the camera to the Scene* app (page 18). To use the Scene app, you need to install it.

Tap to start up the Scene app.

Displayed only while camera images are being received. Tapping displays the images currently being received (pages 24, 26).

Tap to perform the operations below. View the SSID of the camera connected to the smartphone View communication history View a brief explanation of the app (Android Terminal) Change the setting for adding location information to images

(page 29) (Certain cameras) Change camera settings (pages 10, 31)

* The Scene app is an image management app by Ripplex Inc. It makes it possible to display images at high speed and to share albums with friends.

EXILIM Connect Top Screen

8

The first time you establish a wireless connection between the camera and a smartphone, you need to use the procedure below to configure wireless connection settings. There are two types of wireless connection: Bluetooth wireless technology connection and wireless LAN connection.

. Using a Smartphone that Supports Bluetooth Smart (Pairing) Wireless connection settings can be configured by simply establishing a Bluetooth wireless technology connection (pairing) between the camera and smartphone. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter a wireless mode and then select Pairing.

2. On the smartphone, start up the EXILIM Connect app. If this is the first time you are starting up EXILIM

Connect, a Software End User License Agreement will appear. Tap Agree. This will display a screen that explains app functions. On the screen, tap Next to continue to the text screen. Tapping Done at the end will display the top screen (page 7).

3. On the smartphone, tap Pairing.

4. On the smartphone, tap the cameras name you want to pair with. This completes pairing of the camera and smartphone, and establishes a Bluetooth wireless technology connection. In the case of an Android terminal, wireless LAN connection settings are also

configured automatically. In this case, advance to step 8 of this procedure. If the screen shown in step 8 is not displayed, use the smartphones Wi-Fi settings to select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

In the case of an iPhone (iOS), you need to configure wireless LAN settings (install a profile) next. Advance to step 5 of this procedure.

5. On the smartphone, tap Install. Follow the instructions that appear on the smartphone to install the profile required for wireless LAN setup. On some smartphone models, the passcode input screen may appear. If this

happens, input your smartphones passcode.

6. After installation of the profile is complete, tap Done on the smartphone.

Establishing a Wireless Connection for the First Time

Pairing

9

7. On the smartphone screen, tap the EXILIM Connect icon. This establishes a wireless LAN connection between the camera and smartphone. If you are using an iPhone (iOS) and there is no wireless LAN connection

between the camera and smartphone, use the smartphones Wi-Fi settings to select the cameras SSID to establish a wireless LAN connection between the camera and smartphone.

8. On the smartphone, tap OK. iPhone (iOS): Next, configure Scene Link settings. Follow the instructions that

appear on your iPhone. Selecting Linked for the Scene Link setting enables use of One Time Share (page 30). To link with the Scene app, you need to have the Scene app installed on your smartphone.

9. Follow the instructions that appear on the camera to complete the pairing operation.

. Using a Smartphone that does not Support Bluetooth Smart You need to configure smartphone wireless LAN connection settings by inputting the cameras SSID and password. For information about how to configure wireless LAN connection settings, refer to your cameras user documentation.

. Checking the Connection Status You can use the EXILIM Connect top screen to check the current status of the connection with the camera.

Nothing Not paired with a camera.

Gray Paired with a camera, but not connected with Bluetooth wireless technology.

Pink Paired with a camera, connected with Bluetooth wireless technology.

Gray No wireless LAN connection with a camera.

Pink Wireless LAN connection with a camera.

Bluetooth wireless technology connection status

Wireless LAN connection status

10

. What to do if you are unable to establish a wireless LAN connection between the camera and a smartphone.

This problem may be caused when the smartphone is already connected to one of the types of wireless LANs below. Re-establish the wireless LAN connection using the cameras SSID and password.

Household wireless LAN Public wireless LAN Portable wireless LAN device

. Unpairing the Camera from a Smartphone To use the camera with a different smartphone, first unpair it from the current smartphone. Note that you need to perform operations on both the smartphone and the camera to unpair them. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the smartphone TOP screen (page 7), tap .

2. On the smartphone, tap Unpairing.

3. On the smartphone, tap Unpair. If you are unpairing from an iPhone (iOS), delete the cameras wireless LAN

connection settings (profile) from the iPhone settings.

4. On the cameras Wireless settings screen, select Unpairing to unpair.

11

You can configure the app so images are sent from the paired camera to the smartphone as soon as they are shot. If there is no connection between the camera and smartphone when the images are shot, they will be sent as soon as a connection is established. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode. If your camera has a [W] (Wireless) button:

Press [W] (Wireless). If your camera does not have a [W] (Wireless) button:

Press [MENU], select the REC MENU tab or PLAY MENU tab, select Wireless Mode, and then press [SET].

If your camera supports touch panel operation: Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select Wireless settings, Auto Send, and then On.

3. On the camera, enter the REC mode and shoot. This will establish a wireless LAN connection between your camera and smartphone, and send the snapshot you just recorded to the smartphone. With an EX-FR Series camera, images are sent to the smartphone when the

camera enters the sleep mode. To put the camera into the sleep mode, confirm that camera and controller power is turned on, and then press the controller [p] (Power) button.

IMPORTANT!

The maximum size movie file that can be sent by cameras Auto Send is 100 MB.

NOTE Auto Send cannot be enabled unless the camera is paired with a smartphone. Both a Bluetooth and wireless LAN connection are required between the camera

and smartphone to auto send camera images. With some camera models, you can specify the size of snapshots sent to the

smartphone using the cameras Resize before send feature. You can use the smartphone apps below to view snapshots after sending them.

iPhone (iOS): Camera Roll of the Photos app Android terminal: Gallery, Photo, or another photo browser app

Auto Send is disabled while the cameras Airplane Mode setting is On. Auto Send become re-enabled when the setting is changed to Off.

Having the Camera Send Images to the Smartphone as They are Recorded (Auto Send)

12

Images shot while the cameras Auto Send setting is On will be sent to the smartphone, even if the apps Auto Send setting is changed to Off before the images are sent.

Depending on the connected camera, turning off the camera while there are unsent images in memory will cause an alert message to appear. If you want the images to be sent, leave the camera on until the send operation is complete. Pressing the cameras [ON/OFF] (Power) again will turn off the camera.

Depending on the connected camera, disconnection of the camera and smartphone while there are unsent images will cause an alert message to appear, and then the camera will automatically turn off after about one minute. In this case, the camera will try to send the images again after it is turned back on.

13

You can use the procedures in this section to view snapshots stored in camera memory on a smartphone, and to copy snapshots and movies to the smartphone. Depending on the connected camera, you may also be able to use EXILIM Connect to delete and protect images stored in camera memory.

. Bluetooth Wireless Technology Connection If there is a Bluetooth wireless technology connection between the camera and smartphone, the connection icon ( ) on the EXILIM Connect top screen will be pink. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. Depending on your camera model, perform one of the operations below. Camera model other than EX-FR Series Turn off the camera. With certain camera models, you can leave the camera on and display one of

the screens below before moving on to step 2. Record screen Playback screen Wireless mode screen

EX-FR Series camera Leave the camera turned on and perform either of the operations below before moving on to step 2.

Either enter the sleep mode.

Turn on the camera and controller.

On the controller, press [p] (Power). This will enter the sleep mode, which is indicated by the cameras operation lamp slowly flashing green. Or display the wireless mode screen.

Touch the Show Icons icon.

Touch the wireless mode icon.

2. On the smartphone, start up the EXILIM Connect app. Check to make sure that the connection icon ( ) on the top screen is pink.

3. On the smartphone, tap View on Phone. After a short while, the camera will start up in its wireless mode and display a menu of images in camera memory. Tapping will start Remote Capture. If your camera has a telescoping lens

starting a Remote Capture operation will cause the lens to extend. Make sure there is nothing near the camera that might interfere with lens movement.

Viewing Snapshots and Movies in Camera Memory on a Smartphone (View on Phone)

Viewing Camera Images on the Smartphone

14

. Cannot Connect with Bluetooth Wireless Technology The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode. If your camera has a [W] (Wireless) button:

Press [W] (Wireless). If your camera does not have a [W] (Wireless) button:

Press [MENU], select the REC MENU tab or PLAY MENU tab, select Wireless Mode, and then press [SET].

If your camera supports touch panel operation: Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select Send to phone, and then View on phone.

3. For the smartphones Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

4. On the smartphone, start up the EXILIM Connect app. After a short while, the camera will start up in its wireless mode and display a menu of images in camera memory. Tapping will start Remote Capture. If your camera has a telescoping lens

starting a Remote Capture operation will cause the lens to extend. Make sure there is nothing near the camera that might interfere with lens movement.

NOTE While there is a wireless LAN connection between an EX-FR Series camera or

some EX-TR Series cameras and a smartphone, and the wireless mode screen is displayed on the camera, EXILIM Connect can be used to view images in camera memory.

15

1. Use the procedure under Viewing Camera Images on the Smartphone to display the image menu that includes the camera image you want on the smartphone.

2. Tap the image you want to display. This displays the image you tapped. To return to the image menu, tap (Back).

Displays a full-screen view of the displayed image. To exit the full-screen view, tap .

Copies the displayed image to a smartphone.

Deletes the displayed image.* A protected file cannot be deleted.

Protects the displayed image.* To unprotect an image, tap (Protect) again.

* Depending on the camera model this option may not be displayed or may be disabled.

Displaying a Single Camera Image

16

1. Use the procedure under Viewing Camera Images on the Smartphone to display the image menu that includes the camera image you want on the smartphone.

2. On the smartphone, tap Select.

3. On the smartphone, tap the images you want to copy. There will be a check mark in the check box of all the images you select. You can copy up to 100 images per copy operation.

4. After selecting all of the images you want to copy, tap (Copy to Smartphone) on the smartphone. This will copy the images you selected to the smartphone.

5. After the image copy operation is complete, perform one of the operations described below on the smartphone. Share Album in Scene app:* You can use the Scene app to share the copied images. Preview photo in Scene app: You can use the Scene app to view the copied images. Send to SNS: Displays a screen for sending images to a social networking site. Cancel: Exits the operation.

* Depending on your smartphones OS version, the Share Album in Scene app may not appear.

Copying Camera Images to a Smartphone

17

This function is available for some camera models.

1. Use the procedure under Viewing Camera Images on the Smartphone to display the image menu that includes the camera image you want on the smartphone.

2. On the smartphone, tap Select.

3. On the smartphone, tap the images you want to delete. There will be a check mark in the check box of all the images you select.

4. After selecting all of the images you want to delete, tap (Delete) on the smartphone.

5. On the smartphone, tap OK. This will delete the selected image from the camera.

NOTE A protected file cannot be deleted.

This function is available for some camera models.

1. Use the procedure under Viewing Camera Images on the Smartphone to display the image menu that includes the camera image you want on the smartphone.

2. On the smartphone, tap Select.

3. On the smartphone, tap the images you want to protect. There will be a check mark in the check box of all the images you select.

4. After selecting all of the images you want to protect, tap (Protect) on the smartphone. This protects the selected images. To unprotect an image, tap it on the smartphone and then tap (Protect)

again.

Deleting Camera Images

Protecting a Camera Image

18

Images send by a cameras auto send function are automatically stored in the Scene app album when received by the phone. To use the Scene app, you need to install it. You need to use the Scene app to create the album for the images. For information about Scene app operations, contact Ripplex Inc.

1. On the smartphone, start up the EXILIM Connect app.

2. On the smartphone, tap Share Album.

3. On the smartphone, turn on Share Album.

4. Tap the album where you want the images to go.

5. Tap Back to return to the top screen.

This function lets you remotely shoot a snapshot or movie with the camera using a smartphone (Remote Capture). You also can perform remote zoom, self-timer, and other operations as well.

You can start Remote Capture by performing the simple steps below. If there is a Bluetooth wireless technology connection between the camera and smartphone, the connection icon ( ) on the EXILIM Connect top screen will be pink.

1. Depending on your camera model, perform one of the operations below. Camera model other than EX-FR Series Turn off the camera. With certain camera models, you can leave the camera on and display one of

the screens below before moving on to step 2. Record screen Playback screen Wireless mode screen

EX-FR Series camera Leave the camera turned on and perform either of the operations below before moving on to step 2.

Either enter the sleep mode.

Turn on the camera and controller.

On the controller, press [p] (Power). This will enter the sleep mode, which is indicated by the cameras operation lamp slowly flashing green.

Using the Scene App (Share Album)

Using a Smartphone as a Camera Remote Controller (Remote Capture)

Bluetooth wireless technology connection

19

Or display the wireless mode screen.

Touch the Show Icons icon.

Touch the wireless mode icon.

2. On the smartphone, start up the EXILIM Connect app. Check to make sure that the connection icon ( ) on the top screen is pink.

3. On the smartphone, tap Remote Capture. After a short while, the camera will start up in its wireless mode, ready to record images under remote control of the smartphone.

4. Compose the image on the smartphones screen as you shoot. About 60 seconds after Remote Capture starts, the cameras monitor screen

will go blank. Even though the monitor screen is blank, you can shoot images as long as the cameras back lamp or operation lamp is lit green.

With an EX-FR Series camera, you can shoot images as long as the cameras wireless LAN connection lamp is lit blue.

After you are finished with Remote Capture, return to the apps top screen. You can view an image stored in camera memory by tapping .

20

Perform the procedure below to start Remote Capture. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode. If your camera has a [W] (Wireless) button:

Press [W] (Wireless). If your camera does not have a [W] (Wireless) button:

Press [MENU], select the REC MENU tab or PLAY MENU tab, select Wireless Mode, and then press [SET].

If your camera supports touch panel operation: Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select Shoot with phone, and then Remote Start or Start. If there is a wireless LAN connection between the smartphone and camera,

advance to step 4 of this procedure.

3. For the smartphones Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

4. On the smartphone, start up the EXILIM Connect app.

5. Compose the image on the smartphones screen as you shoot. About 60 seconds after Remote Capture starts, the cameras monitor screen

will go blank. Even though the monitor screen is blank, you will be able to shoot images as long as the cameras back lamp or operation lamp is lit green.

With an EX-FR Series camera, the controller monitor screen will go blank and the controllers operation lamp will flash green about 60 seconds after Remote Capture starts. Even though the controller monitor screen is blank, you can shoot images as long as the cameras wireless LAN connection lamp is lit blue.

After you are finished with Remote Capture, return to the apps top screen. You can view an image stored in camera memory by tapping .

NOTE While there is a wireless LAN connection between an EX-FR Series camera or

some EX-TR Series cameras and a smartphone, and the wireless mode screen is displayed on the camera, EXILIM Connect can be used to start a Remote Capture operation.

Cannot Connect with Bluetooth Wireless Technology

21

. Camera Limitations Depending on the model of the camera being used there may be limitations on shooting. Equipped functions depend on the camera model. The Movie Quality is always STD (640x480) when shooting with Remote Capture. O Tracking cannot be selected for the AF area setting while shooting with

Remote Capture. If O Tracking is selected in another mode, selecting Remote Capture will cause the AF area setting to change to U Spot.

The Motion Shutter cannot be used while shooting with this function. Some camera models let you change to another recording mode. Available

recording modes depend on the camera model. Depending on your camera model, the settings below can be configured with

EXILIM Connect while Program Auto High Speed CS is selected as the recording mode. The settings you can configure depend on your camera model. High Speed CS fps, Maximum CS Shots, Pre-record CS Shots, Pre-record CS

When the focus mode setting is AF (Auto Focus) or Macro, continuous AF is enabled during Remote Capture and focus is performed in the center of image.

Certain camera models allow interval recording of snapshots (Interval Snapshot). To start an Interval Snapshot operation, select either of the modes below as the EXILIM Connect recording mode. The recording mode you can select depends on your camera model and camera setup. Interval Shot ( Standard, Intelligent), Stationary Shot*

* When the camera is paired with a smartphone, these modes cause images to be sent to the smartphone automatically as they are shot by the camera. Note, however, that the shooting interval is fixed. Also, there are some limitations on camera operation.

22

EXILIM Connect supports the Remote Capture operations listed below. This manual explains EXILIM Connect operations based on screens that appear using the iPhone (iOS) version. Some operations may differ depending on your smartphone and camera type.

* Depending on the camera model, this function may not be displayed or you may not be able to change its setting.

Controlling Your Camera with a Smartphone

Exits Remote Capture.

Select this item to configure image recording settings. The settings you can configure depend on the cameras recording mode. Turning on Auto copy after shooting causes images you shoot with the camera to be copied automatically to the connected smartphone.

Tap to change the recording mode.* Tap to view images stored in camera memory

(page 13).

Displays current flash or LED light settings. Tap to change flash or LED light settings*.

Displays what is being picked up by the cameras lens.

Tap to display a full-screen view of the shooting range. To return to the standard view, tap .

Performs a zoom operation.

Starts Prerecord CS shooting*. This button is displayed when the camera is in the Program Auto High Speed CS Mode and the Pre-record CS Shots setting is anything other than 0 or the Pre- record CS setting is on.

Toggles between snapshot and movie shooting.

Shoot a snapshot or start movie recording.

Receives the snapshot that was just recorded with the camera. This option is not displayed while the Auto copy after shooting setting is turned on, because recorded images are automatically sent to the smartphone.

Shows whether or not location information is being included. A GPS icon is displayed while information is being embedded.

Displays current self-timer settings. Tap to change self-timer settings*.

3 2

6

7

8

bl

1

bm

bn

5

4

bk

bo

9

23

With some camera models, you can use the procedure below to send an image displayed in the PLAY mode (including movies) to a smartphone by pressing the cameras front shutter button. After sending an image to a smartphone, you can then upload it to a social networking service.

The camera operations you need to perform depend on the camera model. For full details, see the user documentation that comes with your camera.

1. Turn on the camera and enter the PLAY mode.

2. On the camera, press [MENU].

3. On the camera, select Front Shutter from the PLAY MENU and then press [SET].

4. On the camera, select Quick Send and then press [SET]. Pressing the front shutter button sends the displayed image to a smartphone

via wireless LAN.

Sending the Image Displayed on the Camera Monitor Screen to a Smartphone (Quick Send)

To assign the Quick Send function to the front shutter button

24

. Bluetooth wireless technology connection If there is a Bluetooth wireless technology connection between the camera and smartphone, the connection icon ( ) on the EXILIM Connect top screen will be pink. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, display the images you want to send to the smartphone. To send one image from a CS, press [SET] to start playback of the group

images. When the image you want to send is displayed, press [SET] again to pause playback.

2. On the camera, press the front shutter button. This will establish a connection between the smartphone and camera, and send the selected images to the smartphone. If you are using an iPhone (iOS) and there is no wireless LAN connection

between the camera and smartphone, use the smartphones Wi-Fi settings to select the cameras SSID to establish a wireless LAN connection between the camera and smartphone.

On the smartphone, tapping while images are being received displays the images. You can perform the operations below after image receive is complete. Share Album in Scene app:* You can use the Scene app on the smartphone to send images from the camera to a smartphone. Preview photo in Scene app: You can use the Scene app on the smartphone to view the images received from the camera. Send to SNS: Displays a screen for sending images to a social networking site. To TOP Panel: Exits this operation and returns to the TOP screen.

* Depending on your smartphones OS version, the Share Album in Scene app may not appear.

. Cannot Connect with Bluetooth Wireless Technology The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, display the images you want to send to the smartphone. To send one image from a CS group, press [SET] to start playback of the group

images. When the image you want to send is displayed, press [SET] again to pause playback.

2. On the camera, press the front shutter button.

To send the image on the camera monitor screen to a smartphone

25

3. For the smartphones Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

4. On the smartphone, start up the EXILIM Connect app. This will send the images you selected to the smartphone. On the smartphone, tapping while images are being received displays the

images.

5. After image send is complete, perform one of the operations described below on the smartphone. Share Album in Scene app:* You can use the Scene app on the smartphone to send images from the camera to a smartphone. Preview photo in Scene app: You can use the Scene app on the smartphone to view the images received from the camera. Send to SNS: Displays a screen for sending images to a social networking site. To TOP Panel: Exits this operation and returns to the TOP screen.

* Depending on your smartphones OS version, the Share Album in Scene app may not appear.

NOTE If there is a wireless LAN connection between the camera and smartphone, on

the EXILIM Connect top screen will be pink. With some camera models, you can specify the size of snapshots sent to the

smartphone using the cameras Resize before send feature. You can use the smartphone apps below to view snapshots after sending them.

iPhone (iOS): Camera Roll of the Photos app Android terminal: Gallery, Photo, or another photo browser app

26

You can select one more snapshot and/or movie file in camera memory and send it to a smartphone. You can select files up to 500MB for a single send operation. The number of files per send operation depends on the connected camera model. After sending an image to a smartphone, you can then upload it to a social networking service.

NOTE With some camera models, you can specify the size of snapshots sent to the

smartphone using the cameras Resize before send feature. You can use the smartphone apps below to view snapshots after sending them.

iPhone (iOS): Camera Roll of the Photos app Android terminal: Gallery, Photo, or another photo browser app

If there is a Bluetooth wireless technology connection between the camera and smartphone, the connection icon ( ) on the EXILIM Connect top screen will be pink. The camera operations you need to perform depend on the camera model. For full

details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode. If your camera has a [W] (Wireless) button:

Press [W] (Wireless). If your camera does not have a [W] (Wireless) button:

Press [MENU], select the REC MENU tab or PLAY MENU tab, select Wireless Mode, and then press [SET].

If your camera supports touch panel operation: Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select Send to phone, and then Send Selected Image.

3. Select all of the images you want to send to the smartphone.

Sending a Snapshot or Movie File from Camera Memory to a Smartphone (Send Selected Image)

Bluetooth wireless technology connection

27

4. Send the images to the smartphone. This will establish a connection between the smartphone and camera, and send the selected images to the smartphone. If you are using an iPhone (iOS) and there is no wireless LAN connection

between the camera and smartphone, use the smartphones Wi-Fi settings to select the cameras SSID to establish a wireless LAN connection between the camera and smartphone.

On the smartphone, tapping while images are being received displays the images. You can perform the operations below after image receive is complete. Share Album in Scene app:* You can use the Scene app on the smartphone to send images from the camera to a smartphone. Preview photo in Scene app: You can use the Scene app on the smartphone to view the images received from the camera. Send to SNS: Displays a screen for sending images to a social networking site. To TOP Panel: Exits this operation and returns to the TOP screen.

* Depending on your smartphones OS version, the Share Album in Scene app may not appear.

NOTE If there is a wireless LAN connection between the camera and smartphone, on

the EXILIM Connect top screen will be pink.

28

The camera operations you need to perform depend on the camera model. For full details, see the user documentation that comes with your camera.

1. On the camera, enter the wireless mode. If your camera has a [W] (Wireless) button:

Press [W] (Wireless). If your camera does not have a [W] (Wireless) button:

Press [MENU], select the REC MENU tab or PLAY MENU tab, select Wireless Mode, and then press [SET].

If your camera supports touch panel operation: Touch the Show Icons icon and then the wireless mode icon.

2. On the camera, select Send to phone, and then Send Selected Image.

3. Select all of the images you want to send to the smartphone.

4. Send the images to the smartphone.

5. For the smartphones Wi-Fi settings, select the SSID displayed on the camera and establish a wireless LAN connection between the camera and smartphone.

6. On the smartphone, start up the EXILIM Connect app. This will send the images you selected to the smartphone. On the smartphone, tapping while images are being received displays the

images.

7. After image send is complete, perform one of the operations described below on the smartphone. Share Album in Scene app:* You can use the Scene app on the smartphone to send images from the camera to a smartphone. Preview photo in Scene app: You can use the Scene app on the smartphone to view the images sent from the camera. Send to SNS: Displays a screen for sending images to a social networking site. To TOP Panel: Exits this operation and returns to the TOP screen.

* Depending on your smartphones OS version, the Share Album in Scene app may not appear.

NOTE If there is a wireless LAN connection between the camera and smartphone, on

the EXILIM Connect top screen will be pink.

Cannot Connect with Bluetooth Wireless Technology

29

Perform the steps below to add location information to snapshots sent to the smartphone.

IMPORTANT!

Enabling location-based services causes the recording date, location information, and other personally identifiable information to be included in the snapshot data. Take care when sharing or publishing such images on web services, etc.

Never use this camera for navigation, surveying, etc.

Using Auto Send or Send Selected Image When images shot while On is selected for location information with the wireless settings of the cameras wireless mode are sent to the smartphone using Auto Send (page 11) or Send Selected Image (page 26), the smartphone will add information about where the snapshot was shot. You can check whether or not location information was added successfully on the smartphones image receive screen. When the smartphone receives multiple images at the same time, With geo tag will be shown if even one of the images is received successfully.

Remote Capture Location information is added in the cases described below. This is indicated by a GPS icon on the display. When snapshots are sent to the smartphone while Auto copy after shooting is

enabled in on the EXILIM Connect Remote Capture screen (page 22) When snapshots are sent to the smartphone using on the EXILIM Connect

Remote Capture screen (page 22) iPhone (iOS): In the cases below, a confirmation message will appear asking if you want to enable adding of location information in images. Specify whether or not you want to add location information. After that, you can use the iPhone (iOS) setup to change this setting. When the camera is first paired with the iPhone The first Remote Capture operation after EXILIM Connect 3.0 is installed on the

smartphone Android terminal: On the EXILIM Connect TOP screen (page 7), tap . Next, use the Location info item to enable or disable adding of location information.

Adding Location Information to Snapshots sent to the Smartphone

30

With some camera models, you can share selected snapshots for viewing on smartphones that are not paired with the camera. First you send the snapshots you want to share to a smartphone that is paired with the camera, and then the smartphone uploads the snapshots to a Scene server. From there, image can be shared with other smartphones that are not paired with the camera, by connecting to the Scene server over the Internet. The camera operation and One Time Share operation depend on the camera

model. For full details, see the Users Guide that comes with your camera.

The process by which snapshots are uploaded to the Scene server is described below.

Snapshots you selected on the camera are sent to the smartphone that is paired with the camera.

The snapshots are uploaded from the smartphone to the Scene server. The above steps are automatic. However, in order for them to be performed, the smartphone must be: The Scene app installed.

The Scene app is an image management app by Ripplex Inc. For information about Scene app operations, contact Ripplex Inc.

Connected to the Internet. Paired with the camera (page 8). iPhone (iOS): Linked selected for EXILIM Connect Scene Link setting. (Not

required on an Android terminal.)

. iPhone (iOS): To select Linked for the EXILIM Connect Scene Link setting

1. On the smartphone TOP screen (page 7), tap .

2. On the smartphone, tap Link with Scene app. This will cause your iPhone to determine the current Scene Link setting. If the current setting is Not Linked, it will change to Scene Link at this time.

The following events will cause the Scene Link setting to change automatically to Not Linked. If this happens, you will need to change the Scene Link setting back to Linked before performing a One Time Share operation. Unpairing with the camera and then re-pairing again Re-installing the Scene app

Sharing Snapshots with an Unpaired Smartphone (One Time Share)

31

With some camera models, the functions described in this section become available while there is a wireless LAN connection between the camera and a smartphone.

Use the procedure below to change the password you use when establishing a wireless LAN connection between the camera and a smartphone.

1. On the smartphone TOP screen (page 7), tap .

2. On the smartphone, tap Setting up the camera.

3. On the smartphone, tap WLAN password.

4. Enter the new password. For the password, enter eight single-byte characters.

5. After inputting the password, tap Done. This changes the camera password.

NOTE The new password will become valid the next time a wireless LAN connection is

established between the camera and smartphone.

1. On the smartphone TOP screen (page 7), tap .

2. On the smartphone, tap Setting up the camera.

3. On the smartphone, tap Adjust.

4. Tap Run. This adjusts the cameras current date and time settings in accordance with the smartphone settings.

Configuring Camera Settings

Changing the Camera Password for Wireless LAN Connection (WLAN password)

Using the Smartphone to Change the Cameras Date and Time Settings (Adjust)

32

1. On the smartphone TOP screen (page 7), tap .

2. On the smartphone, tap Setting up the camera.

3. On the smartphone, turn on the Auto Send setting. Now the smartphone will be able to receive images that are automatically sent from the camera as they are recorded.

Setting Up to Receive Images from the Camera as They are Recorded (Auto Send)

33

The camera wont send movies. * Auto Send for movies is limited to 100 MB per movie. You can select files up to

500MB for a single send operation. The number of files per send operation depends on the connected camera model. There is no limit when using EXILIM Connects View on Phone to receive movies from the camera (page 13).

I cant establish a wireless LAN connection between the camera and smartphone. * If the smartphone or other device has a Wi-Fi connection auto switching function

(auto network switching), the function may be affecting the connection with the camera. Disable Wi-Fi connection auto switching (network auto switching) by clearing the settings check box, etc.

* Delete the camera SSID from the smartphone Wi-Fi settings, and then re-input it along with the required password.

* If you have changed to another camera from the one connected to the smartphone, perform one of the operations below. iPhone (iOS): Use iPhone (iOS) settings to delete the profile (wireless LAN connection settings) of the previous camera. Next, configure wireless connection settings (page 8) for the camera you want to connect to the smartphone. Android terminal: Use the smartphone Wi-Fi settings to delete the SSID of the previous camera. Next, configure wireless connection settings (page 8) for the camera you want to connect to the smartphone.

A movie sent to a smartphone cannot be viewed. I dont know where the movie file is stored. * An Android terminal does not display movies in the Gallery app, but movies are

stored in the EXILIM Connect folder. To play back a movie, you need to install a separate movie player app (that supports playback of MOV files) on your terminal. Depending on your movie player, you may not be able to play back a movie or its audio.

I cant establish a Bluetooth wireless technology connection between the camera and smartphone. * Use Bluetooth Smart to connect the camera with the smartphone. Confirm that

the smartphone you are using supports Bluetooth Smart. If you are unsure whether it does, contact the manufacturer of you smartphone.

* Leaving Bluetooth on the smartphone set to On is recommended. * The camera cannot connect with a smartphone if they are too far apart from each

other.

Troubleshooting

34

Remote Capture shooting is not performed when I tap Remote Capture on the smartphone. * To shoot with Remote Capture from a smartphone, you need to first pair the

camera and smartphone, and then establish a Bluetooth wireless technology connection between them (page 8). Next, perform a Remote Capture operation (page 18).

* If the camera is not paired with the smartphone, put the camera in its wireless mode, select Shoot with phone, and then select Remote Start or Start. Connect the smartphone to the access point that appears on the camera monitor screen and start up EXILIM Connect.

I dont see any images when I tap View on Phone on the smartphone. * If you want to view images in camera memory using your smartphone, you first

need to pair the camera and smartphone, and then establish a Bluetooth wireless technology connection between them (page 8). Next, perform a View on Phone operation (page 13).

* If the camera is not paired with the smartphone, put the camera in its wireless mode, select Send to phone, and then select View on phone. Connect the smartphone to the access point that appears on the camera monitor screen and start up EXILIM Connect.

I cant share images with an album. * If you do not have the Scene installed on the smartphone, install it. After

installing Scene, start it up and create an album. For information about Scene app operations, contact Ripplex Inc.

* Turn on Share Album and select the album where you want the images to be stored.

Location information is not added to snapshots sent to the smartphone. * Pair the camera and smartphone, and then establish a Bluetooth wireless

technology connection between them. * Use the procedure described in the users guide to configure wireless settings

and to select On for location information. * (iPhone (iOS)) Check iPhone (iOS) settings. * (Android terminal) Enable Add geo tag to image (page 29). * Configure smartphone settings to acquire location information, and make sure it

is where location information can be received.

35

Except for your own personal enjoyment, unauthorized use of snapshots or movies of images whose rights belong to others, without the permission of the right holder, is forbidden by copyright laws. In some cases, shooting of public performances, shows, exhibitions, etc. may be restricted entirely, even if it is for your own personal enjoyment. Regardless of whether such files are purchased by you or obtained for free, posting them on a website, a file sharing site, or any other Internet site, or otherwise distributing them to third parties without the permission of the copyright holder is strictly prohibited by copyright laws and international treaties. For example, uploading or distributing on the Internet images of TV programs, live concerts, music videos, etc. that were photographed or recorded by you may infringe upon the rights of others. Note that CASIO COMPUTER CO., LTD. shall not be held liable for use of a camera in any way that infringes on the copyrights of others or that violates copyright laws.

Note that trademark and registered trademark are not used within the text of this manual. iPhone is a trademark of Apple Inc. Android and Google Play are trademarks or registered trademarks of Google Inc. App Store is a service mark of Apple Inc. iOS is a trademark or registered trademark of Cisco Systems, Inc. of the United

States. Wi-Fi is a registered trademark of the Wi-Fi Alliance. The Bluetooth word mark and logos are registered trademarks owned by

Bluetooth SIG, Inc. and any use of such marks by CASIO COMPUTER CO., LTD. is under license. Other trademarks and trade names are those of their respective owners.

EXILIM and EXILIM Connect are registered trademarks or trademarks of CASIO COMPUTER CO., LTD.

All other company or product names mentioned herein are registered trademarks or trademarks of their respective companies.

Any and all unauthorized copying, distribution, and transfer for commercial purposes of the software provided by CASIO are prohibited.

Copyrights

The following terms, which are used in this manual, are registered trademarks or trademarks of their respective owners.

Manualsnet FAQs

If you want to find out how the Exilim Connect 3.0 Casio works, you can view and download the Casio Exilim Connect 3.0 Software User's Guide on the Manualsnet website.

Yes, we have the User's Guide for Casio Exilim Connect 3.0 as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The User's Guide should include all the details that are needed to use a Casio Exilim Connect 3.0. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio Exilim Connect 3.0 Software User's Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio Exilim Connect 3.0 Software User's Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio Exilim Connect 3.0 Software User's Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio Exilim Connect 3.0 Software User's Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio Exilim Connect 3.0 Software User's Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.