Casio UT311WN Projector Network Guide PDF

1 of 5
1 of 5

Summary of Content for Casio UT311WN Projector Network Guide PDF

1

Projector Wired LAN

Version 2.2

Keep this manual in a safe place future reference.

PJLink trademark and logo are trademarks applied for registration or are already registered in Japan, the United States of America and other countries and areas.

Crestron Connected is a registered trademark of Crestron Electronics, Inc. of the United States.

AMX is a registered trademark of AMX LLC of the United States. Extron is a registered trademark of Extron Electronics of the United States. Other company and product names may be registered product names or trademarks

of their respective owners.

The contents of this manual are subject to change without notice. This manual is published under strict quality control standards. Should you notice

any errors or other problems, please feel free to contact us about them. Copying of this manual, either in part or its entirety is forbidden. You are allowed to

use these instructions for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.

CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual.

CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or due to any other reason.

The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the same as the screens actually produced by the product.

Unless specifically stated otherwise, all illustrations in this manual show the XJ-UT351WN projector.

2

XJ-UT311WN / XJ-UT351WN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can be controlled from an external device via its LAN port.

Connection Use a LAN cable to connect the Projector to a network device with which you want to establish a wired LAN connection. For details about how to connect, see "Connecting the Projector to a Computer via a Wired LAN" in your projector's user's guide (Network Function Guide). Direct connection between the Projector and a network device

For the above type of connection, use a cross type LAN cable. Connection between the Projector and a network device via a router

Supported Devices and Standards Web Browser This Projector supports control using a computer web browser. For details about connection, see "Using the Projector Admin Pages" in your Projector's user's guide (Network Function Guide). PJLink This Projector supports the PJLink Class1 standard formulated by the Japan Business Machine and Information System Industries Association (JBMIA). For detailed information about PJLink, visit the website below.

URL: http://pjlink.jbmia.or.jp/english

3

The following shows input switching instruction and input switching query parameters and their corresponding input sources.

Parameter Input Source Computer Terminal Setting

11 Computer 1 Auto 12 Computer 1 RGB 13 Computer 1 Component 14 Computer 2 Auto 15 Computer 2 RGB 16 Computer 2 Component 21 Video 22 S-video 31 HDMI1 32 HDMI2 (Not supported with XJ-UT311WN) 42 File Viewer 43 CASIO USB Tool 44 Network

Image only mute is not supported by the AV mute instruction and AV mute state query The cover open error and filter error are not supported by the error state query. A projector name query returns the projector name specified on the System Admin Page. For

information about the System Admin Page, see "Configure Control Panel page network settings"" in your Projector's user's guide (Network Function Guide).

A manufacturer name query returns CASIO. A device name query returns XJ-UT311WN or XJ-UT351WN depending on its device. The password used for the connection authentication process is the same as the System

Admin page password. The Projector can be configured to enable or disable authentication. To do so, use [Network Settings]-[PJLink Authentication] on the Projector's Setup Menu.

Eable: PJLink connection authentication enabled. (Initial default) Disable: PJLink connection authentication disabled.

For information about the functions of other commands, see the PJLink specifications issued by JBMIA. Crestron This Projector supports Crestron Electronics controller and software (RoomView) commands. For detailed information and information about downloading RoomView, visit the website below.

URL http://www.crestron.com/microsites/get-roomview When using the Crestron controller, the controller IP address and other settings must be configured on the Projector. Settings are configured on the Crestron Control page shown below, which appears when your lick [Crestron Control] on the System Admin page.

4

IP address Specifies the controller IP address. IP ID Specifies the controller IP ID. Port Specifies the number of the port being used. (Always 41794)

Enter the applicable information for each item and then click the [Apply] button. This will restart the network function and apply the new settings. AMX This Projector supports the AMX controller and Device Discovery. Commands used for control are PJLink standard commands. For detailed information, visit the website below.

URL: http://www.amx.com/ Extron This Projector supports the Extron controller. Commands used for control are PJLink standard commands. For detailed information, visit the website below.

URL: http://www.extron.com/

Caution The Projector can be configured to enable or disable power via wired LAN on from the

standby state. To do so, use [Network Settings]-[Remote On] on the Projector's Setup Menu. Enable: Power on enabled. Disable: Power on disabled. (Initial default)

Initializing network settings or performing a "Restore All Defaults" operation with the Setup Menu will cause this setting to change to "Disable". If you are operating the Projector using a wired LAN setting, be sure to change this setting back to "Enable" after initialization.

Depending on its model, some of the sources may not be supported by and may not be available on your projector.

NGN170307E-B

Manualsnet FAQs

If you want to find out how the UT311WN Casio works, you can view and download the Casio UT311WN Projector Network Guide on the Manualsnet website.

Yes, we have the Network Guide for Casio UT311WN as well as other Casio manuals. All you need to do is to use our search bar and find the user manual that you are looking for.

The Network Guide should include all the details that are needed to use a Casio UT311WN. Full manuals and user guide PDFs can be downloaded from Manualsnet.com.

The best way to navigate the Casio UT311WN Projector Network Guide is by checking the Table of Contents at the top of the page where available. This allows you to navigate a manual by jumping to the section you are looking for.

This Casio UT311WN Projector Network Guide consists of sections like Table of Contents, to name a few. For easier navigation, use the Table of Contents in the upper left corner.

You can download Casio UT311WN Projector Network Guide free of charge simply by clicking the “download” button in the upper right corner of any manuals page. This feature allows you to download any manual in a couple of seconds and is generally in PDF format. You can also save a manual for later by adding it to your saved documents in the user profile.

To be able to print Casio UT311WN Projector Network Guide, simply download the document to your computer. Once downloaded, open the PDF file and print the Casio UT311WN Projector Network Guide as you would any other document. This can usually be achieved by clicking on “File” and then “Print” from the menu bar.